Power transmission across the sea is an important part of global energy interconnection(GEI).To support the construction of GEI and to serve the needs of future clean energy trans-sea transportation and offshore wind ...Power transmission across the sea is an important part of global energy interconnection(GEI).To support the construction of GEI and to serve the needs of future clean energy trans-sea transportation and offshore wind power development,this study a)analyzes the requirements of the GEI backbone network pertaining to direct current(DC)submarine cable technology,and b)defines the key technical and economic indices of ultrahigh-voltage direct current(UHVDC)submarine cable based on theoretical computations.The research is based on the thermoelectric coupling model and the finite element method.It is shown that the dielectric strength of the insulating materials of the±800 kV~±1100 kV/4000 MW^12000 MW UHVDC submarine cable(extrusion insulation)should be not less than 43~65 kV/mm,while the heat resistance is not less than 110°C.As the cost of submarine cable is 5~10 times higher than that of the overhead line,the project investment need to be decreased to a level within the economical carrying capacity to guarantee extensive applicability of the HVDC submarine cable technology.展开更多
According to the composition of rare earth ores and the market, several feasible separation processes of bastnasite in Baotou of Inner Mongolia and Mianning of Sichuan by solvent extraction in HEH(EHP) HCl system wer...According to the composition of rare earth ores and the market, several feasible separation processes of bastnasite in Baotou of Inner Mongolia and Mianning of Sichuan by solvent extraction in HEH(EHP) HCl system were presented. The parameters of the processes such as stage numbers, volume of mixer settler, fixed investment of extractant and rare earths, consumption of chemical reagents including HCl and NH 3 were calculated and compared. The results show that the novel scheme can save cost more than 20% compared with those of others. By the economical analysis, the optimized separation process of bastnasite was obtained, which can be applied to the treatment of monazite too.展开更多
This paper improved the known study for technical progress in Malmquist productivity index calculating. In the method, all the possible movements for decision making units （DMUs） are listed, and the condition that s...This paper improved the known study for technical progress in Malmquist productivity index calculating. In the method, all the possible movements for decision making units （DMUs） are listed, and the condition that several DMUs lie on the productivity frontier is analyzed. The dynamic efficiencies of Chinese listed power companies from 1997 to 2006 were evaluated. The empirical results indicate that the improved method is effective.展开更多
The rebound effects of technological advancement on energy consumption make it very complicated to measure the impact of technological advancement on energy efficiency.This article,taking 35 industries as samples,util...The rebound effects of technological advancement on energy consumption make it very complicated to measure the impact of technological advancement on energy efficiency.This article,taking 35 industries as samples,utilizes the non-parameter DEA-Malmquist productivity approach to subcategorise technological advancement into three parts:science-technological(sci-tech)progress,pure technical efficiency and efficiency of scale.The panel technique is then used to work out each subcategory’s contribution to energy efficiency individually.Findings show that technological efficiency (calculated by multiplying the results of pure technical efficiency and scale efficiency)is the principal factor in the improvement of energy efficiency while the contribution from sci-tech progress is comparatively less.Overtime,however,the effect of sci-tech progress is gradually heightened while the effect of technical efficiency slowly diminishes.展开更多
Measurement of a production unit-performance is crucial in determining whether it has achieved its objectives or not, and it generates a phase of management process that consists of feedback motivation phases. The pur...Measurement of a production unit-performance is crucial in determining whether it has achieved its objectives or not, and it generates a phase of management process that consists of feedback motivation phases. The purpose of this paper is to analyze the growth potentials of five production machines in a Jordanian company for plastic industries by employing the non-parametric Malmquist productivity index (MPI) over the period from February to July 2014 in both day and night shifts. The productivity change is decomposed into technical efficiency change (TEC) and technological change (TC). Inefficiency values are observed in each period. The percentage of input utilization is determined in all periods. Then, the Malmquist productivity index (MPI) values are calculated for all periods. Finally, comparisons of TEC, TC and MPI are conducted among the five machines and between the day and night shifts for each machine. The MPI results indicate that the needs for internal training, effective operating procedures, and enhancing quality procedures are required to increase the technical efficiency. On the other hand, figuring out more efficient ways of making existing products allowing output to grow at a faster rate than economic inputs, like using new technologies, will increase technological change. In conclusions, Malmquist model analysis shall provide valuable reference information to management when evaluating the progress in the performances of production machines in plastic industry.展开更多
基金supported by the Global Energy Interconnection Group Co.,Ltd.Science and Technology Project(Project No.101662224/Title:UHV large-capacity DC submarine cable key technology and roadmap research)the National Key R&D Program of China(2016YFB0900702)
文摘Power transmission across the sea is an important part of global energy interconnection(GEI).To support the construction of GEI and to serve the needs of future clean energy trans-sea transportation and offshore wind power development,this study a)analyzes the requirements of the GEI backbone network pertaining to direct current(DC)submarine cable technology,and b)defines the key technical and economic indices of ultrahigh-voltage direct current(UHVDC)submarine cable based on theoretical computations.The research is based on the thermoelectric coupling model and the finite element method.It is shown that the dielectric strength of the insulating materials of the±800 kV~±1100 kV/4000 MW^12000 MW UHVDC submarine cable(extrusion insulation)should be not less than 43~65 kV/mm,while the heat resistance is not less than 110°C.As the cost of submarine cable is 5~10 times higher than that of the overhead line,the project investment need to be decreased to a level within the economical carrying capacity to guarantee extensive applicability of the HVDC submarine cable technology.
文摘According to the composition of rare earth ores and the market, several feasible separation processes of bastnasite in Baotou of Inner Mongolia and Mianning of Sichuan by solvent extraction in HEH(EHP) HCl system were presented. The parameters of the processes such as stage numbers, volume of mixer settler, fixed investment of extractant and rare earths, consumption of chemical reagents including HCl and NH 3 were calculated and compared. The results show that the novel scheme can save cost more than 20% compared with those of others. By the economical analysis, the optimized separation process of bastnasite was obtained, which can be applied to the treatment of monazite too.
文摘This paper improved the known study for technical progress in Malmquist productivity index calculating. In the method, all the possible movements for decision making units （DMUs） are listed, and the condition that several DMUs lie on the productivity frontier is analyzed. The dynamic efficiencies of Chinese listed power companies from 1997 to 2006 were evaluated. The empirical results indicate that the improved method is effective.
基金Funded by the National Natural Science Foundation as part of the"Research on the Development Route of China's Manufacturing Industry Based on Resource Constraints and Innovation"(70573045).
文摘The rebound effects of technological advancement on energy consumption make it very complicated to measure the impact of technological advancement on energy efficiency.This article,taking 35 industries as samples,utilizes the non-parameter DEA-Malmquist productivity approach to subcategorise technological advancement into three parts:science-technological(sci-tech)progress,pure technical efficiency and efficiency of scale.The panel technique is then used to work out each subcategory’s contribution to energy efficiency individually.Findings show that technological efficiency (calculated by multiplying the results of pure technical efficiency and scale efficiency)is the principal factor in the improvement of energy efficiency while the contribution from sci-tech progress is comparatively less.Overtime,however,the effect of sci-tech progress is gradually heightened while the effect of technical efficiency slowly diminishes.
文摘Measurement of a production unit-performance is crucial in determining whether it has achieved its objectives or not, and it generates a phase of management process that consists of feedback motivation phases. The purpose of this paper is to analyze the growth potentials of five production machines in a Jordanian company for plastic industries by employing the non-parametric Malmquist productivity index (MPI) over the period from February to July 2014 in both day and night shifts. The productivity change is decomposed into technical efficiency change (TEC) and technological change (TC). Inefficiency values are observed in each period. The percentage of input utilization is determined in all periods. Then, the Malmquist productivity index (MPI) values are calculated for all periods. Finally, comparisons of TEC, TC and MPI are conducted among the five machines and between the day and night shifts for each machine. The MPI results indicate that the needs for internal training, effective operating procedures, and enhancing quality procedures are required to increase the technical efficiency. On the other hand, figuring out more efficient ways of making existing products allowing output to grow at a faster rate than economic inputs, like using new technologies, will increase technological change. In conclusions, Malmquist model analysis shall provide valuable reference information to management when evaluating the progress in the performances of production machines in plastic industry.
