Environmental Technical Standards and the Green Transition of China’s Manufacturing Industry

Distinct from the existing literature conforming to the Porter hypothesis which emphasizes the technological innovation mechanism,this paper examines the mechanism of technological transformation through which environmental technical standards influence the manufacturing industry in reducing emissions and improving efficiency(i.e.green transition).Furthermore,drawing upon enterprise samples from the databases of Chinese Industrial Enterprises and Chinese Industrial Pollution Sources from Major Monitored Enterprises,it empirically validates the results of the theoretical analysis.Overall,our research reveals that environmental technical standards can propel manufacturing enterprises to reduce pollution and increase productivity by following an incremental path of technological transformation,thereby achieving a green transition.Moreover,environmental technical standards indirectly promote green technology innovation in the upstream equipment manufacturing enterprises.Heterogeneity analysis further shows that environmental technical standards have a stronger effect of green transition on those companies with higher pollution emission intensity,lower productivity,slower capital renewal and stronger financing capacity prior to implementing the environmental policies.

Designing Technical Standard System of Strong & Smart Grids Based on SLO Principle

In this paper, the international status of the research on the technical standards of smart grids is overviewed. An approach using the SLO principle to establish the technical standard system of strong & smart grids is put forward. A four-layered structure for the system is expounded, which consists of 8 domains, 26 technical fields, 92 standard series and hundreds of standards.

Build Enterprise Technical Standards Work Pattern to Adapt to New Condition

With new requirements proposed for technical standards work under the new circumstances,the article combining with the practice of Wuhan Iron and Steel Company Limited(WISCO)points out that enterprises must improve the work pattern of standards development and revision,and strengthen the standards implementation management and product quality supervision,so that technical standards can serve as a bridge between technologies and industrialization,support the industrial upgrading and structural optimization,create conditions for promoting trade and unify the market and provides means for global competition,helping enterprises to better cope with the increasing market competition.

Analysis on the Technical Standardization System of Juvenile Product in Europe and the United States of America and Strategies of Technical Measures of Trade

China is the largest country in the trade of juvenile products in the world. However, the products suffered the loss of technical barriers to trade from Europe and the United States of America increased year by year. This paper analyzes the standard system of juvenile products in Europe and the United States of America with the method of standard comparison, to find its relative technical advantages, explore the reasons for the recall notification of juvenile products exported to the above regions by China, propose strategies for breaking down the technical measures of trade, and promote the development of international juvenile product export trade.

First Batch of Topics of “Key Technical Standard Promotion Project” tarted,270 Important National Standards or Professional Standards Will Be Prepared

At the first working meeting of the 'Key Technical Standard PromotionProject', an important project of the national scientific and technical support plan during the'11th Five Year' held recently in Beijing, the first group of 11 research topics for the 'KeyTechnical Standard Promotion Project' was formally introduced. According to Ms. Yu Xinli, who is incharge of the project as Deputy Director of the China National Institute of Standardization, theproject comprises four aspects: the international standards key breakthrough project, the technicalstandards promotion project of adapting technical trade measures, the technical standards innovationproject of basic public welfare, and the technical standard enhancement project of public security.

Discussion on Foreseeing the Enterprises Technical Standards

Under the condition of market economy, the need for products to be characteristic is getting more and more outstanding, and the product market will be transferred gradually from the seller's market to the buyer's. After the issue and implementation of the enterprises technical standards, there will be a stable period. The matter of how to guarantee the products to satisfy the need of the market within this period requires that the enterprise must take the foreseeing of standards into account when developing technical standards, so as to ensure the products to be of persistent competitive power in the market. Here are some things that can show the foreseeing of enterprises technical standards.

Strategy Selection of Production Technical Standards in a Manufacturing Supply Chain Network： The Role of Partnership Density

This paper presents the game of production technical standards between downstream and upstream suppliers on a manufacturing supply chain network when the two parties have different partnership densities, namely, the numbers of replaceable and mature manufacturing partners. We firstly constructed a manufacturing chain network and analyzed its three relationship structures among suppliers with the presence of different relationship densities, and found that all the three relationships brought about the game of production technical standards between partnership-rich and partnership-scanty suppliers. Then we built a two-party payoff matrix, and analyzed the two-party game and evolutionary stable strategy, based on replication dynamic equation and asymmetric evolutionary game theory. The evolutionary stable strategies of two parties under varying payoff parameters were validated through numerical simulation. Finally, we proposed some suggestions for both those manufacturers with more partners and fewer partners, respectively.

Three National Standardizetion Technical Committees Authorized By SAC

In December, 2004, the Standardization Administration of China (SAC) has approved the establishments of three National Standardization Technical Committees. They are the National Standardization Technical Committees for Environmental Protection Products (SAC/TC275), for Safety Management of Agricultural Transgenic Biology (SAC/TC276) and for Testing of New Varieties of Plant (SAC/TC277).The National Standardization Technical Committee for Environmental Protection Products is responsible for the development and revision of national standards in the following fields:

Introduction to Technical Safety Standards for Cosmetics

This paper introduced the development of Technical Safety Standards for Cosmetics(TSSC). It explained changes in TSSC in detail and put forward related suggestions for implementation.

Visualization analysis of the international standard ISO/TC 249 for traditional Chinese medicine

Objective This study proposes to visually review the current situation and progress of standards sets by the International Organization for Standardization/Technical Committee on Traditional Chinese Medicine(ISO/TC 249). The review aims to explore the development strategies of the standards, which will exhibit the considerable impact on the economy, trade and exchanges, and cooperation in the area of traditional Chinese medicine(TCM).Methods ISO/TC 249 standards were searched on the ISO website, and their title, proposed time, current stage, scope, and classification were obtained for further summarization. Gephi was utilized to portray the co-occurrence network graph of the ISO/TC 249 standards subject.Results In ISO/TC 249, there were 116 standards, including 81 published standards and 35 developing standards by April 30, 2022. Two withdrawal standards were published after revision, which were not counted in the total standards. The number of published standards has been increasing since the first standard was published in 2014, whose title was “Sterile acupuncture needles for single use”. Among these standards, 17.24%(20/116) standards were in review, 56.03%(65/116) in publication, 3.45%(4/116) in approval, 5.17%(6/116) in enquiry,3.45%(4/116) in committee, and 14.66%(17/116) in preparation, respectively. With 116 standards, most of the research focused on the medicament, as its classification of the International Classification for Standards(ICS) showed the proportion reaching 49.54%. The network analysis data revealed that the top five most frequent words were “materials” “root” “requirements” “products” and “system”, after removing the noise data, such as prepositions,conjunctions, and pronouns. Additionally, the word “system” co-exists with the terms “computerized” “coding” “image” “tongue” and “analysis”;the word “requirement” co-exists with“manufacturing” “decoction” “process” and “materials”;whereas the word “devices” coexists with “pulse” “electric” “skin” and “measurement”.Conclusion With the increased diversification and complexity of problems, the development of standards is also oriented to multidisciplinary fields to cultivate the interdisciplinary talents, and especially the international standardization talents of compound TCM. Multi-angle analysis, formulation, and demonstration of standards, in line with industry needs in different disciplines, enhance the availability of standards and the ability to serve the industry.

Exploring the Technical Assessment Standards for “Ordinary Purposes” in the CISG

Standards are the scientific basis and an important factor for the assessment of the quality of goods.In International Sale of Goods Law,they are consistent with and complementary to the“general provision”on“ordinary purposes”used to assess the quality of goods.Based on analyses of theories and legal practices and by reviewing the relationship between standards and“ordinary purposes,”in this article,I attempt to find out what standards affect the ascertaining of“ordinary purposes”and present a summary of the preconditions for the sellers’obligatory observance of such standards to provide guidance for the accurate application of other“general provisions”through the use of standards.

Current Situation of International Organization for Standardization/Technical Committee 249 International Standards of Traditional Chinese Medicine

Objective： To review the current situation and progress of traditional Chinese medicine（TCM） international standards, standard projects and proposals in International Organization for Standardization（ISO）/technical committee（TC） 249. Methods： ISO/TC 249 standards and standard projects on the ISO website were searched and new standard proposals information were collected from ISO/TC 249 National Mirror Committee in China. Then all the available data were summarized in 5 closely related items, including proposed time, proposed country, assigned working group（WG）, current stage and classification. Results： In ISO/TC 249, there were 2 international standards, 18 standard projects and 24 new standard proposals proposed in 2014. These 44 standard subjects increased year by year since 2011. Twenty-nine of them were proposed by China, 15 were assigned to WG 4, 36 were in preliminary and preparatory stage and 8 were categorized into 4 fields, 7 groups and sub-groups based on International Classification Standards. Conclusion： A rapid and steady development of international standardization in TCM can be observed in ISO/TC 249.