The Jiangshan-Shaoxing tectonic zone was the northeastern boundary between the Yangtze Block and the Cathaysia Block during the Neoproterozoic and was an intracontinental orogenic belt during late of the early Paleozo...The Jiangshan-Shaoxing tectonic zone was the northeastern boundary between the Yangtze Block and the Cathaysia Block during the Neoproterozoic and was an intracontinental orogenic belt during late of the early Paleozoic. In this tectonic zone, there develops a lot of mylonite underwent strong ductile deformation and schist, gneiss, and amphibolite with medium and high grade metamorphism which was formed during the late of early Paleozoic. The research of geometry and kinematic of ductile deformation in Jiangshan-Shaoxing tectonic zone is very important to reveal the tectonic process of intracontinental orogeny. This paper uses the anisotropy of magnetic susceptibility (AMS) to determine the ductile deformation geometry and kinematic of Jiangshan-Shaoxing tectonic zone combing with the field survey. In this study, 190 specimens of 19 locations and 221 specimens of 23 locations from Wangjiazhai section and Lipu-Sizhai section were analyzed. The magnetic foliation over magnetic lineation in both Wangjiazhai and Lipu-Sizhai sections together with the field observations indicated a compressional deformation pattern. 3 and 4 strong ductile deformation zones can be established in the Wangjiazhai section and the Lipu-Sizhai section, respectively. According to the magnetic fabric and petro-fabric studies, the Northeastern Jiangshan-Shaoxing tectonic zone suffered two kinds of deformation patterns during the late early Paleozoic, i.e., the thrusting deformation followed by sinistral shear deformation.展开更多
The Sanchahe quartz monzonite intrusion is situated in the middle segment of the North Qinling tectonic belt, Central China mainland, and consists chiefly of sanukitoid–like and granodioritic-monzogranitic rocks. The...The Sanchahe quartz monzonite intrusion is situated in the middle segment of the North Qinling tectonic belt, Central China mainland, and consists chiefly of sanukitoid–like and granodioritic-monzogranitic rocks. The sanukitoid–like rocks are characterized by quartz monzonites, which display higher Mg#(55.0–59.0), and enrichments in Na2 O+K2 O(7.28–8.94 %), Ni(21-2312 ppm), Cr(56-4167 ppm), Sr(553-923 ppm), Ba(912-1355 ppm) and LREE((La/Yb)N =9.47–15.3), from negative to slightly positive Eu anomalies(δEu=+0.61 to +1.10), but also depletion in Nb, Ta and Ti. The granodioritic-monzogranitic rocks diaplay various Mg#of 6.00-53.0, high Na2 O+K2 O(7.20– 8.30%), Sr(455–1081 ppm) and(La/Yb)N(27.6–47.8), with positive Eu anomalies(δEu=1.03–1.57) and depleted Nb, Ta and Ti. Laser ablation inductively coupled plasma mass spectrometry(LA-ICPMS) zircon U-Pb isotopic dating reveals that the sanukitoid-like rocks were emplaced at two episodes of magmatism at 457±3 Ma and 431±2 Ma, respectively. The monzogranites were emplaced at 445±7Ma. Sanukitoid–like rocks have their εHf(t) values ranging from +0.3 to +15.1 with Hf–depleted mantle model ages of 445 to 1056 Ma, and the monzogranite shows its εHf(t) values ranging from 21.6 to +10.8 with Hf–depleted mantle model ages of 635 to 3183 Ma. Petrological, geochemical and zircon Lu –Hf isotopic features indicate that the magmatic precursor of sanukitoid–like rocks was derived from partial melting of the depleted mantle wedge materials that were metasomatized by fluids and melts related to subduction of oceanic slab, subsequently the sanukitoid magma ascended to crust level. This emplaced mantle magma caused partial melting of crustally metamorphosed sedimentary rocks, and mixing with the crustal magma, and suffered fractional crystallization, which lead to formations of quartz monzonites. However, the magmatic precursor of the granodioritic-monzogranitic rocks were derived from partial melting of subducted oceanic slab basalts. Integrated previous investigation for the adackitic rocks in the south of the intrusion, the Sanchahe intrusion signed that the North Qinling tectonic zone was developed in an early Paleozoic transitionally tectonic background from an island arc to back–arc.展开更多
In order to get the 3-D fine velocity structure in the Capital-circle area of China, 6 explosions, ranging from 1800 to 2500 kg, were conducted and recorded by an array of 240 seismographs. A reflection/refraction su...In order to get the 3-D fine velocity structure in the Capital-circle area of China, 6 explosions, ranging from 1800 to 2500 kg, were conducted and recorded by an array of 240 seismographs. A reflection/refraction survey was carried out along the profile extending from Anxin county, Hebei Province northeastward to Yanshan Mountains, crossing the Zhangjiakou-Bohai tectonic zone. The 2-D velocity structure of P wave was imaging along the profile. The results show that abnormality exists in the deep structure of the Zhangjiakou-Bohai tectonic zone: The base- ment is significantly depressed, the interfaces and Moho are uplifted, and a strong velocity gradient layer is existed above the Moho that may be dislocated by deep fault. The crust of Huabei basin is thin and low velocity body ex- ists in the crust. The Yanshan Mountains′ crust is thick, the layers in the crust are quite clear and the velocity in the layer is homogeneous. Huabei basin differs from Yanshan Mountains in structure.展开更多
Lower crustal earthquake occurrence in the Central Indian Tectonic Zone (CITZ) of the Indian sub-continent was investigated using magnetotelluric (MT) data. MT models across the CITZ, including the new resistivity...Lower crustal earthquake occurrence in the Central Indian Tectonic Zone (CITZ) of the Indian sub-continent was investigated using magnetotelluric (MT) data. MT models across the CITZ, including the new resistivity model across the 1938 Satpura lower crustal earthquake epicenter, show low resistive (〈80 Ωm) mid-lower crust and infer small volume (〈1 vol%) of aqueous fluids existing in most part of lower crust. This in conjunction with xenoliths and other geophysical data supports a predominant brittle/semi-brittle lower crustal theology. However, the local deep crustal zones with higher fluid content of 2.2%-6.5% which have been mapped imply high pore pressure conditions. The observation above and the significant strain rate in the region provide favorable conditions (strong/ moderate rock strength, moderate temperature, high pore pressure and high strain rate) for brittle failure in the lower crust. It can be inferred that the fluid-rich pockets in the mid-lower crust might have catalyzed earthquake generation by acting as the source of local stress (fluid pressure), which together with the regional stress produced critical seismogenic stress conditions. Alternatively, fluids reduce the shear strength of the rocks to favor tectonic stress concentration that can be transferred to seismogenic faults to trigger earthquakes.展开更多
: In this paper, 3-D velocity images of the crust and upper mantle beneath the Nanbei tectonic zone of China are constructed using P-wave travel time residuals of earthquakes, with the data supplied by China's sei...: In this paper, 3-D velocity images of the crust and upper mantle beneath the Nanbei tectonic zone of China are constructed using P-wave travel time residuals of earthquakes, with the data supplied by China's seismic networks and the International Seismic Centre.展开更多
The active and quiet phenomenon of moderate strong earthquakes one year before the earthquakes with M S≥7.0, the spatial distribution characteristics of the solid tide modulating and triggering earthquakes and the st...The active and quiet phenomenon of moderate strong earthquakes one year before the earthquakes with M S≥7.0, the spatial distribution characteristics of the solid tide modulating and triggering earthquakes and the strong earthquake mechanisms on the Chinese continent have been studied. The secondary arcuate tectonic zone composed of the west Kunlun-Anyêmaqên faults is believed to be a very important boundary to characterize strong earthquake activity of M S≥7.0 on the Chinese continent, that is, a boundary between the seismically active region and the quiet region of moderately strong earthquakes one year before earthquakes with M S≥7.0, and a boundary of the spatial distributions between the solid tide modulating strong earthquakes (M S≥7.0) and the non-modulating ones. It might be related with the characteristics of spatial distribution of focal mechanism solutions of strong earthquakes on the Chinese Continent.展开更多
The Daliangshan tectonic zone is a rhombic area to the east of the Anninghe and Zemuhe fault zones in the middle segment of the Xianshuihe-Xiaojiang fault system along the southeast margin of the Qinghai-Xizang (Tibe...The Daliangshan tectonic zone is a rhombic area to the east of the Anninghe and Zemuhe fault zones in the middle segment of the Xianshuihe-Xiaojiang fault system along the southeast margin of the Qinghai-Xizang (Tibet) Plateau. Since the Cenozoic era, the neotectonic deformation in the Daliangshan tectonic zone has presented not only sinistral slip and reverse faulting along the Daliangshan fault zone, but also proximate SN-trending crust shortening. It is estimated that the average crust shortening in the Daliangshan tectonic zone is 10.9 ± 1.6 km, with a shortening rate of 17.8 ± 2.2% using the method of balanced cross-sections. The crust shortening from folding occurred mainly in the Miocene and the Pliocene periods, lasting no more than 8.6 Ma. Based on this, a crust shortening velocity of 1.3 ± 0.2 mm/a can be estimated. Compared with the left offset along the Daliangshan fault zone, it is recognized that crust shortening by folding plays an important part in transferring crustal deformation southeastward along the Xianshulhe-Xiaojiang fault system.展开更多
The Shaytor apatite-rich iron deposit is located in the Kashmar-Kerman tectonic zone in the central of the Iranian plat, which is an important polymetallic belt in Iran. The ore bodies are interbedded with the upper i...The Shaytor apatite-rich iron deposit is located in the Kashmar-Kerman tectonic zone in the central of the Iranian plat, which is an important polymetallic belt in Iran. The ore bodies are interbedded with the upper inferacaamberian calc-alkaline igneous rocks that show well-preserved porphyritic and volcaniclastic textures. The iron ores have massive, disseminated, and brecciated structures. Magnetite from the Shaytor deposit is low in Ti (TiO<sub>2</sub> = up to 0.70 wt.%) and different ore types show similar rare earth element (REE) and trace element-normalized patterns with weak-to-moderate enrichment in light REE and negative Eu anomalies, indicating a common source and genesis. The similar REE patterns for the magnetite and volcanic basaltic host rocks suggest their close genetic linkage and support a magmatic origin for the deposit. The Shaytor deposit shows the typical characteristics of Kiruna-type deposits with regard to the mineral assemblages, ore texture and structure, and the apatite and magnetite geochemistry. We propose that the Kiruna-type Shaytor apatite-rich iron deposit was derived from Fe-P-rich melt through liquid immiscibility and the activity of hydrothermal fluids.展开更多
The Mianle tectonic zone (Mianle zone), an ancient suture zone in addition to the Shangdan suture in the Qinling-Dabie orogenic belt, marks an important tectonic division geo-logically separating north from south and ...The Mianle tectonic zone (Mianle zone), an ancient suture zone in addition to the Shangdan suture in the Qinling-Dabie orogenic belt, marks an important tectonic division geo-logically separating north from south and connecting east with west in China continent. To de-termine present structural geometry and kinematics in the Mianle tectonic zone and to recon-struct the formation and evolution history involving plate subduction and collision in the Qinling-Dabie orogenic belt, through a multidisciplinary study, are significant for exploring the mountain-building orogenesis of the central orogenic system and the entire process of the major Chinese continental amalgamation during the Indosinian.展开更多
We obtained the 2-D P-wave velocity structure of the lithosphere in the eastern North China Craton, Shanxi fault subsidence zone, and Yinchuan-Hetao fault subsidence zone by ray tracking technology based on six groups...We obtained the 2-D P-wave velocity structure of the lithosphere in the eastern North China Craton, Shanxi fault subsidence zone, and Yinchuan-Hetao fault subsidence zone by ray tracking technology based on six groups of clearly identified crustal phases and one group of lithospheric interface reflection phases from seismic recording sections of 21 shots along the 1300-km-long Yancheng-Baotou deep seismic wide-angle reflection/refraction profile. The results indicate significant differ- ences between the lithospheric structure east and west of the Taihang Mountains, which is a gravity-gradient zone as well as a zone of abrupt change in lithospheric thickness and a separation zone of different rock components. East of the Taihang Mountains, the Mesozoic and Cenozoic lithospheric structure of the North China Craton has undergone strong reformation and destruction, resulting in the lithosphere thickness decreasing to 70-80 km. The North China Basin has a very thick Cenozoic sedimentary cover and the deepest point of crystalline basement is about 7.0 kin, with the crustal thickness decreasing to about 31.0 kin. The crystalline basement of the Luxi uplift zone is relatively shallow with a depth of 1.0-2.0 km and crustal thickness of 33.0-35.0 km. The Subei Basin has a thicker Cenozoic sedimentary cover and the bottom of its crystalline basement is at about 5.0-6.0 km with a crustal thickness of 31.0-32.0 km. The Tanlu fault is a deep fracture which cuts the lithosphere with a significant velocity structure difference on either side of the fault. The Tanlu fault plays an important role in the lithospheric destruction in the eastern part of the North China Craton. West of the Taihang Mountains, the crustal thickness increases sig- nificantly. The crust thickness beneath the Shanxi fault depression zone is about 46 km, and there is a low-velocity structure with a velocity of less than 6.1 km s-~ in the upper part of the middle crust. Combined with other geophysical study results, our data shows that the lithospheric destruction at the Shaanxi-Shanxi fault depression zone and the Yinchuan-Hetao rift surround- ing the Ordos block is non-uniform. The lithosphere thickness is about 80-90 km in the Datong-Baotou area, 75-137 km at the Dingxiang-Shenmu region, and about 80-120 km in the Anyang-Yichuan area. The non-uniform lithospheric destruction may be related to the ancient tectonic zone surrounding the Ordos block. This zone experienced multi-period tectonic events in the long-term process of its tectonic evolution and was repeatedly transformed and weakened. The weakening level is related to the interactions with the Ordos block. The continental collision between the Cenozoic India and Eurasia plates and N-E thrust- ing by the Qinghai Tibet Plateau block is causing further reformation and reduction of the lithosphere.展开更多
Glaucophane in Shuangjiang area, West Yunnan Province, supplies a chance for studying south segment of Lancangjiang tectonic zone. But people are at odds as to whether two stage glaucophane exists or not, glaucophane...Glaucophane in Shuangjiang area, West Yunnan Province, supplies a chance for studying south segment of Lancangjiang tectonic zone. But people are at odds as to whether two stage glaucophane exists or not, glaucophane is the result of dynamic metamorphism later, or indicates a high P/T metamorphic belt when Paleozoic Tethys Sea closed. Authors discover in a recent research that there is only one stage glaucophane in Shuangjiang area, and three blueschist belts are distributed near N S tending, and glaucophane in Shuangjiang area is related to the eastward subduction of Changning Menglian basin.展开更多
The Jiangshan-Shaoxing fault zone (JSFZ) was formed by the amalgamation of the Yangtze and Cathaysia blocks in the Neoproterozoic.Since the Paleozoic,the JSFZ has experienced three episodes of tectonic activities:t...The Jiangshan-Shaoxing fault zone (JSFZ) was formed by the amalgamation of the Yangtze and Cathaysia blocks in the Neoproterozoic.Since the Paleozoic,the JSFZ has experienced three episodes of tectonic activities:the Early Paleozoic ductile strike-slip shear,Early Mesozoic thrust,and the Late Mesozoic extension.展开更多
The Moyar Shear Zone (MSZ) of the South Indian granulite terrain hosts a prominent syenite pluton (-560 Ma) and associated NW-SE to NE-SW trending mafic dyke swarm (-65 Ma and 95 Ma). Preliminary magnetic fabric...The Moyar Shear Zone (MSZ) of the South Indian granulite terrain hosts a prominent syenite pluton (-560 Ma) and associated NW-SE to NE-SW trending mafic dyke swarm (-65 Ma and 95 Ma). Preliminary magnetic fabric studies in the mafic dykes, using Anisotropy of Magnetic Susceptibly (AMS) studies at low-field, indicate successive emplacement and variable magma flow direction. Magnetic lineation and foliation in these dykes are identical to the mesoscopic fabrics in MSZ mylonites, indicating shear zone guided emplacement. Spatial distribution of magnetic lineation in the dykes suggests a common conduit from which the source magma has been migrated. The magnetic foliation trajectories have a sigmoidal shape to the north of the pluton and curve into the MSZ suggesting dextral sense of shear. Identical fabric conditions for magnetic fabrics in the syenite pluton and measured field fabrics in mylonite indicate syntectonic emplacement along the Proterozoic crustal scale dextral shear zone with repeated reactivation history.展开更多
Objective The occurrence of the devastating Wenchuan earthquake not only caused huge economic loss and deaths but also raised a question whether or not it would trigger any destructive earthquakes on its neighboring s...Objective The occurrence of the devastating Wenchuan earthquake not only caused huge economic loss and deaths but also raised a question whether or not it would trigger any destructive earthquakes on its neighboring segments in the Longmenshan Thrust Zone (LTZ) in the future.展开更多
The Bayan Har block is mainly bounded by the east Kunlun fault zone to the north, Garze-Yushu -Xianshuihe fault zone to the south and Longmenshan fault zone to the east (Fig. 1). In the past 20 years, large earthqua...The Bayan Har block is mainly bounded by the east Kunlun fault zone to the north, Garze-Yushu -Xianshuihe fault zone to the south and Longmenshan fault zone to the east (Fig. 1). In the past 20 years, large earthquakes have occurred frequently along this block's boundaries, which has received much attention among geoscientists. Whether large earthquakes will happen (and where) along this block's boundary faults in the future are two key problems that need to be addressed. This study calculates the accumulated tectonic stress and superposition of the coulomb stress caused by fault slip of 16 large earthquakes since 1904, and evaluates the possible locations of future earthquakes that may occur around this block.展开更多
The Dongbo ophiolite in the western part of the Yarlung-Zangbo suture zone in southern Tibet rests tectonically on the middle-late Triassic and Cretaceous flysch units,and consist mainly of peridotites,mafic dikes,
We used matched filter, spectrum analysis, and continuation methods of potential field for data processing and obtained the geomagnetic field distribution about the continent and continental margin in southeast China....We used matched filter, spectrum analysis, and continuation methods of potential field for data processing and obtained the geomagnetic field distribution about the continent and continental margin in southeast China. On the basis of grid data, inversion was conducted and magnetic field distribution and magnetic structure on bedding of different depths were obtained. The new results show that: 1. The magnetic field characteristics are largely different in horizontal and vertical directions and they can be divided into zones according to the continental blocks of Yangtze, Cathaysia, Kangdian (Sichuan-Yunnan) and Qinling-Dabie. 2. The Tanlu fault extends southward along the Ganjiang fault and the Wuchuan-Sihui fault after it crossed over the Yangtze River and was offset locally in the east-west direction. The Tanlu fault finally slips into the South China Sea at Hainan Island. 3. The boundary between Yangtze and Cathaysia blocks starts from Hangzhou Bay in the east, extends along Jiangshao fault and passes through Nanchang, Changsha, and Guilin, and finally enters the sea at Qinzhou, Guangxi. 4. The distribution of buried structure zone is located at 24.5°-26° N.展开更多
Ordovician diorite-quartz diorite mylonite(Saganoseki quartz diorite) was discovered in Sambagawa metamorphic terrane at the northern margin of Saganoseki Peninsula,Kyushu Island,Japan.The LA-ICP-MS zircon U-Pb geochr...Ordovician diorite-quartz diorite mylonite(Saganoseki quartz diorite) was discovered in Sambagawa metamorphic terrane at the northern margin of Saganoseki Peninsula,Kyushu Island,Japan.The LA-ICP-MS zircon U-Pb geochronology revealed that the intrusion age of Saganoseki quartz diorite was 473.3±3.6 Ma.These rocks show the volcanic arc affinity based on the trace element composition.On the basis of geochronological and geochemical results,Saganoseki quartz diorite is considered to be a member of the Early Paleozoic igneous rocks of the Kurosegawa tectonic zone.Saganoseki quartz diorite is located just south of the Median Tectonic Line(MTL)and is in close contact with the pelitic and psammitic schist without any brittle shear zone.U-Pb ages of detrital zircon grains from two psammitic schists show the estimated sedimentation age of early Late Cretaceous,indicate that these psammitic schists are the member of Sambagawa metamorphic rocks.Together with these results and the mode of occurrence in the field,we argue that the Early Paleozoic igneous rocks of the Kurosegawa tectonic zone existed as an upper structural unit of the Sambagawa terrane.This relationship is the key to reconstruct the Mesozoic tectonics of Japan as a part of East Asia,and its evolution through time.展开更多
To better understand the lithosphere mantle collision tectonics between the India plate and Asia plate, we determine three dimensional P wave velocity structure beneath western Tibet using 27,439 arrival times from 2,...To better understand the lithosphere mantle collision tectonics between the India plate and Asia plate, we determine three dimensional P wave velocity structure beneath western Tibet using 27,439 arrival times from 2,174 teleseismic events recorded by 182 stations of Hi-CLIMB Project and 16 stations in the north of Hi-CLMB. Our tomographic images show the velocity structure significantly difference beneath northern and southern Qiangtang, which can further prove that the Longmu Co-Shuanghu ophiolitic belt is a significant tectonic boundary fault zone. There are two prominent high velocity anomalies and two prominent low velocity anomalies in our images. One obvious high velocity anomalies subduct beneath the Tibet at the long distance near 34°N, whereas it is broke off by an obvious low velocity anomaly under the IYS. We interpret them as northward subducting Indian lithosphere mantle and the low velocity anomanly under IYS likely reflects mantle material upwelling triggered by tearing of the northward subduction Indian lithosphere. The other prominent high velocity anomaly was imaged at a depth from 50 km to 200 km horizontal and up to the northern Qiangtang with its southern edge extending to about 34°N through Hoh Xil block. We infer it as the southward subducting Asia lithosphere mantle. The other widely low velocity anomaly beneath the Qiangtang block lies in the gap between the frontier of India plate and Asia plate, where is the channel of mantle material upwelling.展开更多
基金supported by the project of geological survey and evolution of Jiangshan-Shaoxing tectonic zone from Department of Land and Resources of Zhejiang Province
文摘The Jiangshan-Shaoxing tectonic zone was the northeastern boundary between the Yangtze Block and the Cathaysia Block during the Neoproterozoic and was an intracontinental orogenic belt during late of the early Paleozoic. In this tectonic zone, there develops a lot of mylonite underwent strong ductile deformation and schist, gneiss, and amphibolite with medium and high grade metamorphism which was formed during the late of early Paleozoic. The research of geometry and kinematic of ductile deformation in Jiangshan-Shaoxing tectonic zone is very important to reveal the tectonic process of intracontinental orogeny. This paper uses the anisotropy of magnetic susceptibility (AMS) to determine the ductile deformation geometry and kinematic of Jiangshan-Shaoxing tectonic zone combing with the field survey. In this study, 190 specimens of 19 locations and 221 specimens of 23 locations from Wangjiazhai section and Lipu-Sizhai section were analyzed. The magnetic foliation over magnetic lineation in both Wangjiazhai and Lipu-Sizhai sections together with the field observations indicated a compressional deformation pattern. 3 and 4 strong ductile deformation zones can be established in the Wangjiazhai section and the Lipu-Sizhai section, respectively. According to the magnetic fabric and petro-fabric studies, the Northeastern Jiangshan-Shaoxing tectonic zone suffered two kinds of deformation patterns during the late early Paleozoic, i.e., the thrusting deformation followed by sinistral shear deformation.
基金financially supported by the National Geological Survey Project and National Scientific and Technological Support Project (Grant Nos. 1212011085534 and 2011BAB04B05)
文摘The Sanchahe quartz monzonite intrusion is situated in the middle segment of the North Qinling tectonic belt, Central China mainland, and consists chiefly of sanukitoid–like and granodioritic-monzogranitic rocks. The sanukitoid–like rocks are characterized by quartz monzonites, which display higher Mg#(55.0–59.0), and enrichments in Na2 O+K2 O(7.28–8.94 %), Ni(21-2312 ppm), Cr(56-4167 ppm), Sr(553-923 ppm), Ba(912-1355 ppm) and LREE((La/Yb)N =9.47–15.3), from negative to slightly positive Eu anomalies(δEu=+0.61 to +1.10), but also depletion in Nb, Ta and Ti. The granodioritic-monzogranitic rocks diaplay various Mg#of 6.00-53.0, high Na2 O+K2 O(7.20– 8.30%), Sr(455–1081 ppm) and(La/Yb)N(27.6–47.8), with positive Eu anomalies(δEu=1.03–1.57) and depleted Nb, Ta and Ti. Laser ablation inductively coupled plasma mass spectrometry(LA-ICPMS) zircon U-Pb isotopic dating reveals that the sanukitoid-like rocks were emplaced at two episodes of magmatism at 457±3 Ma and 431±2 Ma, respectively. The monzogranites were emplaced at 445±7Ma. Sanukitoid–like rocks have their εHf(t) values ranging from +0.3 to +15.1 with Hf–depleted mantle model ages of 445 to 1056 Ma, and the monzogranite shows its εHf(t) values ranging from 21.6 to +10.8 with Hf–depleted mantle model ages of 635 to 3183 Ma. Petrological, geochemical and zircon Lu –Hf isotopic features indicate that the magmatic precursor of sanukitoid–like rocks was derived from partial melting of the depleted mantle wedge materials that were metasomatized by fluids and melts related to subduction of oceanic slab, subsequently the sanukitoid magma ascended to crust level. This emplaced mantle magma caused partial melting of crustally metamorphosed sedimentary rocks, and mixing with the crustal magma, and suffered fractional crystallization, which lead to formations of quartz monzonites. However, the magmatic precursor of the granodioritic-monzogranitic rocks were derived from partial melting of subducted oceanic slab basalts. Integrated previous investigation for the adackitic rocks in the south of the intrusion, the Sanchahe intrusion signed that the North Qinling tectonic zone was developed in an early Paleozoic transitionally tectonic background from an island arc to back–arc.
基金Preliminary study of State Key Basic Research Project (2001CCA02100) and National Natural Science Foundation of China (40234038).
文摘In order to get the 3-D fine velocity structure in the Capital-circle area of China, 6 explosions, ranging from 1800 to 2500 kg, were conducted and recorded by an array of 240 seismographs. A reflection/refraction survey was carried out along the profile extending from Anxin county, Hebei Province northeastward to Yanshan Mountains, crossing the Zhangjiakou-Bohai tectonic zone. The 2-D velocity structure of P wave was imaging along the profile. The results show that abnormality exists in the deep structure of the Zhangjiakou-Bohai tectonic zone: The base- ment is significantly depressed, the interfaces and Moho are uplifted, and a strong velocity gradient layer is existed above the Moho that may be dislocated by deep fault. The crust of Huabei basin is thin and low velocity body ex- ists in the crust. The Yanshan Mountains′ crust is thick, the layers in the crust are quite clear and the velocity in the layer is homogeneous. Huabei basin differs from Yanshan Mountains in structure.
文摘Lower crustal earthquake occurrence in the Central Indian Tectonic Zone (CITZ) of the Indian sub-continent was investigated using magnetotelluric (MT) data. MT models across the CITZ, including the new resistivity model across the 1938 Satpura lower crustal earthquake epicenter, show low resistive (〈80 Ωm) mid-lower crust and infer small volume (〈1 vol%) of aqueous fluids existing in most part of lower crust. This in conjunction with xenoliths and other geophysical data supports a predominant brittle/semi-brittle lower crustal theology. However, the local deep crustal zones with higher fluid content of 2.2%-6.5% which have been mapped imply high pore pressure conditions. The observation above and the significant strain rate in the region provide favorable conditions (strong/ moderate rock strength, moderate temperature, high pore pressure and high strain rate) for brittle failure in the lower crust. It can be inferred that the fluid-rich pockets in the mid-lower crust might have catalyzed earthquake generation by acting as the source of local stress (fluid pressure), which together with the regional stress produced critical seismogenic stress conditions. Alternatively, fluids reduce the shear strength of the rocks to favor tectonic stress concentration that can be transferred to seismogenic faults to trigger earthquakes.
文摘: In this paper, 3-D velocity images of the crust and upper mantle beneath the Nanbei tectonic zone of China are constructed using P-wave travel time residuals of earthquakes, with the data supplied by China's seismic networks and the International Seismic Centre.
文摘The active and quiet phenomenon of moderate strong earthquakes one year before the earthquakes with M S≥7.0, the spatial distribution characteristics of the solid tide modulating and triggering earthquakes and the strong earthquake mechanisms on the Chinese continent have been studied. The secondary arcuate tectonic zone composed of the west Kunlun-Anyêmaqên faults is believed to be a very important boundary to characterize strong earthquake activity of M S≥7.0 on the Chinese continent, that is, a boundary between the seismically active region and the quiet region of moderately strong earthquakes one year before earthquakes with M S≥7.0, and a boundary of the spatial distributions between the solid tide modulating strong earthquakes (M S≥7.0) and the non-modulating ones. It might be related with the characteristics of spatial distribution of focal mechanism solutions of strong earthquakes on the Chinese Continent.
基金the National Natural Science Foundation of China(40472109)"973"State Key Basic Research Project of China(2004CB418410)Joint Eanthquake Science Foundation of China(105066)
文摘The Daliangshan tectonic zone is a rhombic area to the east of the Anninghe and Zemuhe fault zones in the middle segment of the Xianshuihe-Xiaojiang fault system along the southeast margin of the Qinghai-Xizang (Tibet) Plateau. Since the Cenozoic era, the neotectonic deformation in the Daliangshan tectonic zone has presented not only sinistral slip and reverse faulting along the Daliangshan fault zone, but also proximate SN-trending crust shortening. It is estimated that the average crust shortening in the Daliangshan tectonic zone is 10.9 ± 1.6 km, with a shortening rate of 17.8 ± 2.2% using the method of balanced cross-sections. The crust shortening from folding occurred mainly in the Miocene and the Pliocene periods, lasting no more than 8.6 Ma. Based on this, a crust shortening velocity of 1.3 ± 0.2 mm/a can be estimated. Compared with the left offset along the Daliangshan fault zone, it is recognized that crust shortening by folding plays an important part in transferring crustal deformation southeastward along the Xianshulhe-Xiaojiang fault system.
文摘The Shaytor apatite-rich iron deposit is located in the Kashmar-Kerman tectonic zone in the central of the Iranian plat, which is an important polymetallic belt in Iran. The ore bodies are interbedded with the upper inferacaamberian calc-alkaline igneous rocks that show well-preserved porphyritic and volcaniclastic textures. The iron ores have massive, disseminated, and brecciated structures. Magnetite from the Shaytor deposit is low in Ti (TiO<sub>2</sub> = up to 0.70 wt.%) and different ore types show similar rare earth element (REE) and trace element-normalized patterns with weak-to-moderate enrichment in light REE and negative Eu anomalies, indicating a common source and genesis. The similar REE patterns for the magnetite and volcanic basaltic host rocks suggest their close genetic linkage and support a magmatic origin for the deposit. The Shaytor deposit shows the typical characteristics of Kiruna-type deposits with regard to the mineral assemblages, ore texture and structure, and the apatite and magnetite geochemistry. We propose that the Kiruna-type Shaytor apatite-rich iron deposit was derived from Fe-P-rich melt through liquid immiscibility and the activity of hydrothermal fluids.
基金This work was supported by the National Natu-ral Science Foundation of China (Grant Nos. 49732080, 40234041).
文摘The Mianle tectonic zone (Mianle zone), an ancient suture zone in addition to the Shangdan suture in the Qinling-Dabie orogenic belt, marks an important tectonic division geo-logically separating north from south and connecting east with west in China continent. To de-termine present structural geometry and kinematics in the Mianle tectonic zone and to recon-struct the formation and evolution history involving plate subduction and collision in the Qinling-Dabie orogenic belt, through a multidisciplinary study, are significant for exploring the mountain-building orogenesis of the central orogenic system and the entire process of the major Chinese continental amalgamation during the Indosinian.
基金supported by the National Natural Science Foundation of China(Grant Nos.91214205,41174052)the Special Scientific Research of Seismologic Industry(Grant No.200908001)
文摘We obtained the 2-D P-wave velocity structure of the lithosphere in the eastern North China Craton, Shanxi fault subsidence zone, and Yinchuan-Hetao fault subsidence zone by ray tracking technology based on six groups of clearly identified crustal phases and one group of lithospheric interface reflection phases from seismic recording sections of 21 shots along the 1300-km-long Yancheng-Baotou deep seismic wide-angle reflection/refraction profile. The results indicate significant differ- ences between the lithospheric structure east and west of the Taihang Mountains, which is a gravity-gradient zone as well as a zone of abrupt change in lithospheric thickness and a separation zone of different rock components. East of the Taihang Mountains, the Mesozoic and Cenozoic lithospheric structure of the North China Craton has undergone strong reformation and destruction, resulting in the lithosphere thickness decreasing to 70-80 km. The North China Basin has a very thick Cenozoic sedimentary cover and the deepest point of crystalline basement is about 7.0 kin, with the crustal thickness decreasing to about 31.0 kin. The crystalline basement of the Luxi uplift zone is relatively shallow with a depth of 1.0-2.0 km and crustal thickness of 33.0-35.0 km. The Subei Basin has a thicker Cenozoic sedimentary cover and the bottom of its crystalline basement is at about 5.0-6.0 km with a crustal thickness of 31.0-32.0 km. The Tanlu fault is a deep fracture which cuts the lithosphere with a significant velocity structure difference on either side of the fault. The Tanlu fault plays an important role in the lithospheric destruction in the eastern part of the North China Craton. West of the Taihang Mountains, the crustal thickness increases sig- nificantly. The crust thickness beneath the Shanxi fault depression zone is about 46 km, and there is a low-velocity structure with a velocity of less than 6.1 km s-~ in the upper part of the middle crust. Combined with other geophysical study results, our data shows that the lithospheric destruction at the Shaanxi-Shanxi fault depression zone and the Yinchuan-Hetao rift surround- ing the Ordos block is non-uniform. The lithosphere thickness is about 80-90 km in the Datong-Baotou area, 75-137 km at the Dingxiang-Shenmu region, and about 80-120 km in the Anyang-Yichuan area. The non-uniform lithospheric destruction may be related to the ancient tectonic zone surrounding the Ordos block. This zone experienced multi-period tectonic events in the long-term process of its tectonic evolution and was repeatedly transformed and weakened. The weakening level is related to the interactions with the Ordos block. The continental collision between the Cenozoic India and Eurasia plates and N-E thrust- ing by the Qinghai Tibet Plateau block is causing further reformation and reduction of the lithosphere.
文摘Glaucophane in Shuangjiang area, West Yunnan Province, supplies a chance for studying south segment of Lancangjiang tectonic zone. But people are at odds as to whether two stage glaucophane exists or not, glaucophane is the result of dynamic metamorphism later, or indicates a high P/T metamorphic belt when Paleozoic Tethys Sea closed. Authors discover in a recent research that there is only one stage glaucophane in Shuangjiang area, and three blueschist belts are distributed near N S tending, and glaucophane in Shuangjiang area is related to the eastward subduction of Changning Menglian basin.
基金funded by the National Science and Technology Major Project (2008ZX05005–001)China Geological Survey Project (Grant No.1212011120160)
文摘The Jiangshan-Shaoxing fault zone (JSFZ) was formed by the amalgamation of the Yangtze and Cathaysia blocks in the Neoproterozoic.Since the Paleozoic,the JSFZ has experienced three episodes of tectonic activities:the Early Paleozoic ductile strike-slip shear,Early Mesozoic thrust,and the Late Mesozoic extension.
基金the Department of Science and Technology, Government of India,New Delhi,for providing financial assistance through project number ESS/16/284/2006 for the work
文摘The Moyar Shear Zone (MSZ) of the South Indian granulite terrain hosts a prominent syenite pluton (-560 Ma) and associated NW-SE to NE-SW trending mafic dyke swarm (-65 Ma and 95 Ma). Preliminary magnetic fabric studies in the mafic dykes, using Anisotropy of Magnetic Susceptibly (AMS) studies at low-field, indicate successive emplacement and variable magma flow direction. Magnetic lineation and foliation in these dykes are identical to the mesoscopic fabrics in MSZ mylonites, indicating shear zone guided emplacement. Spatial distribution of magnetic lineation in the dykes suggests a common conduit from which the source magma has been migrated. The magnetic foliation trajectories have a sigmoidal shape to the north of the pluton and curve into the MSZ suggesting dextral sense of shear. Identical fabric conditions for magnetic fabrics in the syenite pluton and measured field fabrics in mylonite indicate syntectonic emplacement along the Proterozoic crustal scale dextral shear zone with repeated reactivation history.
基金jointly supported by the National Natural Science Foundation of China(grant No.41602206)the International Science&Technology Cooperation Program of China(grant No.2011DFG23400)
文摘Objective The occurrence of the devastating Wenchuan earthquake not only caused huge economic loss and deaths but also raised a question whether or not it would trigger any destructive earthquakes on its neighboring segments in the Longmenshan Thrust Zone (LTZ) in the future.
基金supported by Geological Survey programs from Geological Survey of China(No.1212011120163 and 12120114002101)Basic Science Research Fund of the Institute of Geomechanics,CAGS (No.DZLXJK201212)National Natural Science Foundation of China (No.41171009)
文摘The Bayan Har block is mainly bounded by the east Kunlun fault zone to the north, Garze-Yushu -Xianshuihe fault zone to the south and Longmenshan fault zone to the east (Fig. 1). In the past 20 years, large earthquakes have occurred frequently along this block's boundaries, which has received much attention among geoscientists. Whether large earthquakes will happen (and where) along this block's boundary faults in the future are two key problems that need to be addressed. This study calculates the accumulated tectonic stress and superposition of the coulomb stress caused by fault slip of 16 large earthquakes since 1904, and evaluates the possible locations of future earthquakes that may occur around this block.
文摘The Dongbo ophiolite in the western part of the Yarlung-Zangbo suture zone in southern Tibet rests tectonically on the middle-late Triassic and Cretaceous flysch units,and consist mainly of peridotites,mafic dikes,
基金jointly supported by China National Natural Science Foundation(Grant No.40074020)by a special fund(Grant No.40242004).
文摘We used matched filter, spectrum analysis, and continuation methods of potential field for data processing and obtained the geomagnetic field distribution about the continent and continental margin in southeast China. On the basis of grid data, inversion was conducted and magnetic field distribution and magnetic structure on bedding of different depths were obtained. The new results show that: 1. The magnetic field characteristics are largely different in horizontal and vertical directions and they can be divided into zones according to the continental blocks of Yangtze, Cathaysia, Kangdian (Sichuan-Yunnan) and Qinling-Dabie. 2. The Tanlu fault extends southward along the Ganjiang fault and the Wuchuan-Sihui fault after it crossed over the Yangtze River and was offset locally in the east-west direction. The Tanlu fault finally slips into the South China Sea at Hainan Island. 3. The boundary between Yangtze and Cathaysia blocks starts from Hangzhou Bay in the east, extends along Jiangshao fault and passes through Nanchang, Changsha, and Guilin, and finally enters the sea at Qinzhou, Guangxi. 4. The distribution of buried structure zone is located at 24.5°-26° N.
基金This study was supported by the Fukada Geological Institute[Fukada Grant-in-Aid].
文摘Ordovician diorite-quartz diorite mylonite(Saganoseki quartz diorite) was discovered in Sambagawa metamorphic terrane at the northern margin of Saganoseki Peninsula,Kyushu Island,Japan.The LA-ICP-MS zircon U-Pb geochronology revealed that the intrusion age of Saganoseki quartz diorite was 473.3±3.6 Ma.These rocks show the volcanic arc affinity based on the trace element composition.On the basis of geochronological and geochemical results,Saganoseki quartz diorite is considered to be a member of the Early Paleozoic igneous rocks of the Kurosegawa tectonic zone.Saganoseki quartz diorite is located just south of the Median Tectonic Line(MTL)and is in close contact with the pelitic and psammitic schist without any brittle shear zone.U-Pb ages of detrital zircon grains from two psammitic schists show the estimated sedimentation age of early Late Cretaceous,indicate that these psammitic schists are the member of Sambagawa metamorphic rocks.Together with these results and the mode of occurrence in the field,we argue that the Early Paleozoic igneous rocks of the Kurosegawa tectonic zone existed as an upper structural unit of the Sambagawa terrane.This relationship is the key to reconstruct the Mesozoic tectonics of Japan as a part of East Asia,and its evolution through time.
基金supported by the National Key Research and Development Program of China(Grant No.2016YFC0600301)the Geological Investigation Project of China Geological Survey(Grant No.DD20190448,DD20190370)the Natural Science Foundation of China(Grant No.41374101,4171101169,41274095)。
文摘To better understand the lithosphere mantle collision tectonics between the India plate and Asia plate, we determine three dimensional P wave velocity structure beneath western Tibet using 27,439 arrival times from 2,174 teleseismic events recorded by 182 stations of Hi-CLIMB Project and 16 stations in the north of Hi-CLMB. Our tomographic images show the velocity structure significantly difference beneath northern and southern Qiangtang, which can further prove that the Longmu Co-Shuanghu ophiolitic belt is a significant tectonic boundary fault zone. There are two prominent high velocity anomalies and two prominent low velocity anomalies in our images. One obvious high velocity anomalies subduct beneath the Tibet at the long distance near 34°N, whereas it is broke off by an obvious low velocity anomaly under the IYS. We interpret them as northward subducting Indian lithosphere mantle and the low velocity anomanly under IYS likely reflects mantle material upwelling triggered by tearing of the northward subduction Indian lithosphere. The other prominent high velocity anomaly was imaged at a depth from 50 km to 200 km horizontal and up to the northern Qiangtang with its southern edge extending to about 34°N through Hoh Xil block. We infer it as the southward subducting Asia lithosphere mantle. The other widely low velocity anomaly beneath the Qiangtang block lies in the gap between the frontier of India plate and Asia plate, where is the channel of mantle material upwelling.