NUMERICAL SIMULATION OF TEMPERATURE FIELDS FOR WELD METAL SOLIDIFICATION CRACKING IN STAINLESS STEELS

This paper has analyzed the influences of the heat input of welding arc, the latent heat of solidifica- tion,fluid flow of liquid metal on the heat conductivity pertaining to welding solidification crack of stainless steels. As a result,two - dimensional heat conduction models with prescribed heat flux mov- ing along the the have been developed that can simulate welding arc, convection and radiation heat loss from top and bottom surfaces of the workpiece. Finally, the finite element model was used to ana- lyze and calculate the temperature field.

Numerical Simulation of Temperature Field of Die Casting Dies

In this study, the Solidworks was used as pre-processor, which performed the three- dimensional solid construction and automatic enmeshment. The COSMOS was adopted as post- processor to display the temperature distribution and further to simulate the thermal stress distribution of dies. A software package for three-dimensional temperature fields of complicated die casting and its dies was developed and the temperature distributions of a fan cover casting were simulated by the software.

Modeling and simulation of 3D thermal stresses of large-sized castings in solidification processes

When heavy machines and large scaled receiver system of communication equipment are manufactured, it always needs to produce large-sized steel castings, aluminum castings and etc. Some defects of hot cracking by thermal stress often appear during solidification process as these castings are produced, which results in failure of castings. Therefore predicting the effects of technological parameters for production of castings on the thermal stress during solidification process becomes an important means. In this paper, the mathematical models have been established and numerical calculation of temperature fields by using finite difference method (FDM) and then thermal stress fields by using finite element method (FEM) during solidification process of castings have been carried out. The technological parameters of production have been optimized by the results of calculation and the defects of hot cracking have been eliminated. Modeling and simulation of 3D thermal stress during solidification processes of large-sized castings provided a scientific basis, which promoted further development of advanced manufacturing technique.

Simulation of hydrogen diffusion in welded joint of X80 pipeline steel

Hydrogen diffusion coefficients of different regions in the welded joint of X80 pipeline steel were measured using the electro-chemical permeation technique. Using ABAQUS software, hydrogen diffusion in X80 pipeline steel welded joint was studied in consideration of the inhomogeneity of the welding zone, and temperature-dependent thermo-physical and mechanical properties of the metals. A three dimensional finite element model was developed and a coupled thermo-mechanical-diffusion analysis was performed. Hydrogen concentration distribution across the welded joint was obtained. It is found that the postweld residual hydrogen exhibits a non-uniform distribution across the welded joint. A maximum equivalent stress occurs in the immediate vicinity of the weld metal. The heat affected zone has the highest hydrogen concentration level, followed by the weld zone and the base metal.Simulation results are well consistent with theoretical analysis.

Electroplastic effect in AZ31B magnesium alloy sheet through uniaxial tensile tests

The electroplastic effect in AZ31B magnesium alloy sheet was investigated through uniaxial tensile tests. In order to show the athermal effect of the electrical pulses, two types of uniaxial tensile tests at the same testing temperature were carried out： uniaxial tension in environmental cabinet and uniaxial tension with electrical pulses. In addition, the distribution of temperature field in the cross-section area during uniaxial tension with electrical pulses was simulated. The results show that the distribution of temperature field along the cross-section area is homogeneous. By comparing the true stress？true strain curves of AZ31B alloy under uniaxial tensile tests, the athermal effect with electrical pulses was confirmed. The microstructure evolution after the uniaxial tension was studied by optical microscopy. The results indicate that the electrical pulses induced dynamic recrystallization plays an important role in the decrease of flow stress. Finally, a flow stress model of AZ31B sheet taking the influence of electroplastic effect into account was proposed and validated. The results demonstrate that the calculated data fit the experimental data well.

Investigation into Spatter Particles and Their Effect on the Formation Quality During Selective Laser Melting Processes

During the selective laser melting process,a high-energy laser beam acts on the powder,a molten pool is rapidly generated and the characteristic parameters are constantly changing.Among them,temperature is one of the important parameters in the forming process.Due to the generation of splash particles,there will be defects in the microstructure,which will seriously affect the formation quality of the prepared parts.Therefore,it is necessary to study the relationships between the splash behavior,molten pool characteristics and product quality.The finite element simulation of the transient temperature field was performed by ANSYS software.Time-series images at different frame rates were obtained with a high-speed camera,and the dynamic process of splashing was observed.Using IN718 alloy powder,the influence of the laser energy density on the light intensity of the molten pool was studied.The appearance of splash particles and the deviation of the powder chemical elements caused by the splash were analyzed.The results show that the transient temperature field with drastic change is easy to cause spatter,which is consistent with the experimental results.There are large differences in the splash at different shooting frame rates.Increasing the frame rate can allow the observation of details such as the shape,size and number of splash particles,which is beneficial for studying the process of splash formation.At the moment when the splash occurs,the light intensity of the molten pool always first increases and then decreases,depending on the energy input.The higher the energy input is,the more intense the light intensity of the molten pool and the higher the peak interval distribution.Compared with fresh powder,the contents of Al and Ti in powder reused 5 times were reduced by 0.15%and 0.02%,respectively.The increases of these two elements in the splash were 16.18%and 29.62%,respectively,and the content of Nb even exceeded the standard range.When the energy density decreased from 229.17 J/mm3 to 130.95 J/mm3,the relative density of the part increased from 91.82%to 99.83%.This shows that reducing the energy input can reduce the splash to suppress the generation of defects,along with the weakening of the overall light intensity of the molten pool.These results can provide a basis for feature extraction of the molten pool,which is of great significance for real-time monitoring and online control in manufacturing processes and ensuring product quality.

Research and modeling on correlation among microstructure,yield strength and process of bainite/martensite steel

The contributions of different strengthening mechanisms to yield strength of bainite/martensite multiphase rail steel with different finish cooling temperatures in the controlled cooling process were quantitatively investigated.Dislocation density and substructure size of the rail steel were measured by scanning electron microscopy,electron backscatter diffraction and X-ray diffraction.The results show that the dislocation density increases with the decrease in block width in rail steel.Based on the correlation among dislocation density,block width and yield strength,a physical model was proposed to predict the yield strength of rail steel.The variation of block width and dislocation density in different positions of rail head microstructure was integrated with temperature field simulation.Dislocation density and block width reveal significant correlations with the finish cooling temperature.