The real-time measurement of welding temperature field by colorimetric method is described, and with the data acquired from it closed-loop control system of the parameters of temperature field is developed and tested....The real-time measurement of welding temperature field by colorimetric method is described, and with the data acquired from it closed-loop control system of the parameters of temperature field is developed and tested. Experimental results prove that it has high measurement speed (time of a field within 0.5 s) and good dynamic response quality. Weld penetration can be controlled satifactorily under unstable welding condition.展开更多
The effectiveness of a combination of fault current limiter and thyristor controlled braking resistor on power system stability enhancement and damping turbine shaft torsional oscillations has been studied. If both de...The effectiveness of a combination of fault current limiter and thyristor controlled braking resistor on power system stability enhancement and damping turbine shaft torsional oscillations has been studied. If both devices operate at the same bus, the stabilization control scheme can be carried out continuously and with flexibility. As a result, the fault currents are limited, and the generator disturbances and the turbine shaft torsional oscillations are converged quickly. In this paper, the effectiveness of the combination of both devices has been demonstrated by considering 3LG （three-lines-to-ground） fault in a two-machine infinite bus system. Also, temperature rise effect of both devices with various resistance values and weights has been demonstrated. Simulation results indicate a significant power system stability enhancement and damping turbine shaft torsional oscillations as well as with allowable temperature rise.展开更多
Due to its inherent safety feature, the modular high temperature gas-cooled reactor (MHTGR) has been seen as one of the best candidates in building next generation nuclear plants (NGNPs). Since the MHTGR dynamics has ...Due to its inherent safety feature, the modular high temperature gas-cooled reactor (MHTGR) has been seen as one of the best candidates in building next generation nuclear plants (NGNPs). Since the MHTGR dynamics has high nonlinearity, it is necessary to develop nonlinear power-level controller which is not only beneficial to the safe, stable, efficient and autonomous operation of the MHTGR but also easy to be implemented practically. In this paper, based on the concept of shiftedectropy and the physically-based control design approach, it is proved theoretically that the simple proportional-differential (PD) output-feedback power-level control can provide globally asymptotic closed-loop stability. Numerical simulation results verify the theoretical results and show the influence of the controller parameters to the dynamic response.展开更多
High-temperature superconducting(HTS) magnets consisting of no-insulation(NI) double-pancake coils(DPCs) with high thermal stability have been proposed for use in the preparation of high-field magnets. However, increa...High-temperature superconducting(HTS) magnets consisting of no-insulation(NI) double-pancake coils(DPCs) with high thermal stability have been proposed for use in the preparation of high-field magnets. However, increased ramp time is a known disadvantage of the NI approach. To solve this problem, a proportional and integral(PI) active feedback control has been proposed in the charging experiments of the NI magnet. In this study, the electromagnetic-thermal-mechanical characteristics of an NI magnet with and without PI are analyzed to ensure the safety and reliability of PI control. Due to the increase in the radial current of the magnet, the turn-to-turn loss energy of the magnet with PI is more than twice that without PI. However, the magnetization loss energy of the magnet has a small difference with and without PI. It can be also found that the NI magnet with PI has a large temperature rise, and thus it has a low thermal stability margin. Moreover, in the high field, the hoop stress and hoop strain peaks of a magnet with PI are larger than those without PI. Thus, PI control can induce a relatively high risk of mechanical damage in the applications of NI magnets.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No. 59475064) and the Natural Science Foundation of Jiangxi Province.
文摘The real-time measurement of welding temperature field by colorimetric method is described, and with the data acquired from it closed-loop control system of the parameters of temperature field is developed and tested. Experimental results prove that it has high measurement speed (time of a field within 0.5 s) and good dynamic response quality. Weld penetration can be controlled satifactorily under unstable welding condition.
文摘The effectiveness of a combination of fault current limiter and thyristor controlled braking resistor on power system stability enhancement and damping turbine shaft torsional oscillations has been studied. If both devices operate at the same bus, the stabilization control scheme can be carried out continuously and with flexibility. As a result, the fault currents are limited, and the generator disturbances and the turbine shaft torsional oscillations are converged quickly. In this paper, the effectiveness of the combination of both devices has been demonstrated by considering 3LG （three-lines-to-ground） fault in a two-machine infinite bus system. Also, temperature rise effect of both devices with various resistance values and weights has been demonstrated. Simulation results indicate a significant power system stability enhancement and damping turbine shaft torsional oscillations as well as with allowable temperature rise.
文摘Due to its inherent safety feature, the modular high temperature gas-cooled reactor (MHTGR) has been seen as one of the best candidates in building next generation nuclear plants (NGNPs). Since the MHTGR dynamics has high nonlinearity, it is necessary to develop nonlinear power-level controller which is not only beneficial to the safe, stable, efficient and autonomous operation of the MHTGR but also easy to be implemented practically. In this paper, based on the concept of shiftedectropy and the physically-based control design approach, it is proved theoretically that the simple proportional-differential (PD) output-feedback power-level control can provide globally asymptotic closed-loop stability. Numerical simulation results verify the theoretical results and show the influence of the controller parameters to the dynamic response.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11872195, and 11932008)Fundamental Research Funds for the Central Universities (Grant No. lzujbky-2020-1)。
文摘High-temperature superconducting(HTS) magnets consisting of no-insulation(NI) double-pancake coils(DPCs) with high thermal stability have been proposed for use in the preparation of high-field magnets. However, increased ramp time is a known disadvantage of the NI approach. To solve this problem, a proportional and integral(PI) active feedback control has been proposed in the charging experiments of the NI magnet. In this study, the electromagnetic-thermal-mechanical characteristics of an NI magnet with and without PI are analyzed to ensure the safety and reliability of PI control. Due to the increase in the radial current of the magnet, the turn-to-turn loss energy of the magnet with PI is more than twice that without PI. However, the magnetization loss energy of the magnet has a small difference with and without PI. It can be also found that the NI magnet with PI has a large temperature rise, and thus it has a low thermal stability margin. Moreover, in the high field, the hoop stress and hoop strain peaks of a magnet with PI are larger than those without PI. Thus, PI control can induce a relatively high risk of mechanical damage in the applications of NI magnets.
