High temperature-sensitivity sensor based on long period fiber grating inscribed with femtosecond laser transversal-scanning method

We propose a high temperature-sensitive long period fiber grating（LPFG） sensor fabricated by using the femtosecond laser transversal-scanning method. The femtosecond pulses scan over the whole fiber core and some part of the cladding region; the modified regions are more extended. It is found that the LPFG-I fabricated by the transversal-scanning method shows higher temperature sensitivity and better temperature uniformity than that of LPFG-II written by the femtosecond laser point-by-point method. The LPFG-I with a temperature sensitivity of 75.96 pm/°C in the range of 25°C–400°C is measured. Moreover, in the range from 400°C to 800°C, a higher temperature sensitivity of 148.64 pm/°C and good linearity of 0.99 are achieved, while the temperature sensitivity of LPFG-II is only 95.55 pm/°C. LPFG-I exhibits better temperature characteristics, which, to the best of our knowledge, has the highest sensitivity in silica fiber temperature sensors.

On-Chip Micro Temperature Controllers Based on Freestanding Thermoelectric Nano Films for Low-Power Electronics

Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely challenging.Herein,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane substrate.Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are observed.Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.

Breeding and Seed Production Techniques of New Aromatic Danxiangyouzhenliang Rice Variety with Good Quality and High Yield

Danxiangyouzhenliang rice is a high-quality rice variety derived from the hybrid breeding of Danxiang 12A and Xianghuixiangmiao R133.Its unique temperature-sensitive three-line characteristics endow it with significant advantages of high and stable yield,and its rice fragrance is exquisite and its taste is delicate.Danxiangyouzhenliang rice showed good resistance to rice blast and bacterial blight.On June 10,2021,Danxiangyouzhenliang rice passed the Guangxi Crop Variety Approval(Guishendao 2021074).Danxiangyouzhenliang rice is suitable to be planted as early and late rice in southern,central and northern Guangxi.This study summarized the breeding process and high-yielding seed production techniques of Danxiangyouzhenliang rice,in order to provide useful reference for rice breeders and growers.

Preparation and Properties of Hydroxyethyl Methacrylate Chemically Modified Temperature-Sensitive Microgels

A novel series of poly(N-isopropylacrylamide-co-hydroxyethyl methacrylate) (p(NIPAM-co-HEMA)) microgels were prepared through precipitation polymerization. Nuclear magnetic resonance (NMR), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV) and dynamic light scattering (DLS) were employed to characterize the microgels. The experimental results indicate that the prepared microgels with narrow distribution remain good temperature sensitivity after incorporation of functional-OH groups. In marked contrast to the general rule, incorporation of hydrophilic HEMA makes the volume-phase-transition temperature shift to the lower temperature due to the strong intermolecular H-bonding between amide and -OH groups, -OH and -OH groups.

Thermal Error Modeling Method with the Jamming of Temperature-Sensitive Points'Volatility on CNC Machine Tools

Aiming at the deficiency of the robustness of thermal error compensation models of CNC machine tools, the mechanism of improving the models＇ robustness is studied by regarding the Leaderway-V450 machining center as the object. Through the analysis of actual spindle air cutting experimental data on Leaderway-V450 machine, it is found that the temperature-sensitive points used for modeling is volatility, and this volatility directly leads to large changes on the collinear degree among modeling independent variables. Thus, the forecasting accuracy of multivariate regression model is severely affected, and the forecasting robustness becomes poor too. To overcome this effect, a modeling method of establishing thermal error models by using single temperature variable under the jamming of temperature-sensitive points＇ volatility is put forward. According to the actual data of thermal error measured in different seasons, it is proved that the single temperature variable model can reduce the loss of fore- casting accuracy resulted from the volatility of tempera- ture-sensitive points, especially for the prediction of cross quarter data, the improvement of forecasting accuracy is about 5 μm or more. The purpose that improving the robustness of the thermal error models is realized, which can provide a reference for selecting the modelingindependent variable in the application of thermal error compensation of CNC machine tools.

Plant Temperature for Sterile Alteration of a Temperature-Sensitive Genic Male Sterile Rice,Peiai64S

The forecast of sterile alteration for the temperature-sensitive genic male sterile （TGMS） line in two-line hybrid rice seed production was traditionally based on screen temperature determined by weather station. The article put forward a new approach based on plant temperature, which was more exact and direct than the traditional method. The result of the simulation of the self-seeded setting rate of a widely used TGMS line, Peiai64S, by several temperature parameters and durations, showed that the fertility was directly affected by the plant temperature at a height of 20 cm or the air temperature around it in three days duration. Using the stem temperature of three days at a height of 20 cm as the simulation parameter, the fertility of Peiai64S had the maximum, minimum and optimum temperatures as 22.8, 21.7 and 22.5℃, respectively, whereas 23.2, 21.5 and 21.8℃ when using the air temperature of three days around the height of 20 cm as the parameter. Such temperature indices can be used to conclude the sterile alteration of TGMS for safeguarding seed production of twoline hybrid rice. The article also established a statistic model to conclude plant temperature by water temperatures at inflow and outflow, and air temperature and cloudage from weather station.

Finite deformation swelling of a temperature-sensitive hydrogel cylinder under combined extension-torsion

The swelling behavior of a temperature-sensitive poly-N-isopropylacrylamide(PNIPAM) hydrogel circular cylinder is studied subjected to combined extension-torsion and varied temperature. In this regard, a semi-analytical solution is proposed for general combined loading. A finite element(FE) analysis is conducted, subjecting a hydrogel cylinder to the combined extension-torsion and the varied temperature to evaluate the validity and accuracy of the solution. A user-defined UHYPER subroutine is developed and verified under free and constrained swelling conditions. The FE results illustrate excellent agreement with the semi-analytical solution. Due to the complexity of the problem, some compositions and applied loading factors are analyzed. It is revealed that for larger cross-linked density and larger ending temperature, the cylinder yields higher stresses and smaller radial swelling deformation. Besides, the radial and hoop stresses increase by applying larger twist and axial stretch. The hoop stresses intersect at approximately R/Rout = 0.58, where the hoop stress vanishes. Besides, the axial force has direct and inverse relationships with the axial stretch and the twist, respectively. However, the resultant torsional moment behavior is complex, and the position of the maximum point varies significantly by altering the axial stretch and the twist.

Characterization of the role of Smu1 in nuclear localization of splicing factors in the mammalian temperature-sensitive mutant

A temperature-sensitive (ts) mutant of the CHO-K1 cell line, tsTM18, grows at 340C but not at 390C. Smu1 is the gene responsible for ts defects of tsTM18 cells. Previously, we found that the Smu1 ts defect altered the localization (as indicated by enlargement of speckles) of SRSF1 (SF2/ASF) in tsTM18 cells cultured at 390C, suggesting a functional association between Smu1 and SRSF1. Speckles are subnuclear structures that may function as storage/assembly/ modification compartments to supply splicing factors to active transcription sites. The effect of the ts defect of Smu1 on the localization of other factors related to splicing has not been characterized yet. The mechanisms underlying the enlargement of speckles of SRSF1 remain unclear. In the present study, we found that the ts defect of Smu1 affected the nuclear localization of a splicing factor, SRSF2 (SC35), and factors involved in the exon-exon junction complex, Y14 and ALY. Reverse transcription-polymerase chain reaction (RT-PCR) analysis revealed that the ts defect of Smu1 affected alternative splicing of endogenous Clk1/ Sty and SRSF2 genes. Mammalian Clk family kinases are shown to phosphorylate serine/arginine (SR) proteins in vitro and SRSF1 in vivo. RT-PCR analysis of Clk1/Sty showed an accumulation of the truncated form lacking kinase activity in tsTM18 cells incubated at 39?C. These data indicate that an accumulation of kinase-negative Clk1/Sty may lead to alteration of the localization of factors related to splicing resulting in the enlargement of speckles.

Synthesis and characteristics of pH-and temperature-sensitive hydrogels of poly （DMAEMA/NIPAAm）

A kind of novel copolymer hydrogel of poly（N, N-dimethylaminoethyl methacrylate-co-N-isopropylacrylamide） （poly[DMAEMA/NIPAAm]） was synthesized by the initiation of K2S2O8, N, N＇-methylene-bis（acrylamide） （Bis） was used as the crosslinker. The effects of monomer content, pH and temperature on swelling ratio of the hydrogel were investigated; the thermo-sensitivity in deionized water and in physiological saline was determined. It showed that the swelling ratio of the hydrogel could be changed by changing the temperature or pH alternately. Both swelling ratio and LCST （Lower Critical Solution Temperature） of the hydrogel decreased with the increase of NIPAAm in the co-polymer content.

Effect of Loading Condition and Temperature on Dynamic Properties of Asphalt Mixtures

In order to study the effects of loading condition and temperature on the dynamic properties of asphalt mixtures, the dynamic loading tests on different loading condition （various speeds and loads under a certain roughness） and temperature conditions were performed. The experimental result show that the dynamic properties of asphalt mixtures are influenced by vehicle load and speed, besides, the effects of temperature on dynamic properties of asphalt mixture are significant.

Determination and Correlation of Solubilities of Four Novel Benzothiazolium Ionic Liquids with PF_6^- in Six Alcohols

Four novel benzothiazolium ionic liquids with 6PF?([C1Bth][PF6], [C4Bth][PF6], [C5Bth][PF6] and [C6Bth][PF6]) were synthesized, and the rang of their melting points were determined between 358.35 K-424.05 K. The relationship of their melting points and the length of the straight alkyl chain on cation reflected ‘S' type ten-dency. Then, the solubilities of the four ionic liquids in six lower alcohols(methanol, ethanol, 1-propanol, 2-propanol, 1-butanol and 2-methyl-1-propanol) were measured in the temperature rang of 253.15-383.15 K at at-mospheric pressure with static analytical method, respectively. It was found that [C6Bth][PF6] in all investigated ionic liquids had the largest solubility in six alcohols and the solubility of [C4Bth][PF6] in methanol was very sensi-tive for temperature in 313.15-333.15 K, which was so-called "temperature-sensitivity". This feature is of great significance to their application of catalyzing reaction or extraction process, and makes the recovery and reuse of ionic liquids(ILs) become easier. Moreover, the experimental solubility data were correlated with the modified Apelblat equation and λh equation, respectively. It was found that the result of correlation using two divided tem-perature ranges was better than that of using the whole temperature range.

Metal-organic framework IRMOFs coated with a temperaturesensitive gel delivering norcantharidin to treat liver cancer

BACKGROUND Norcantharidin(NCTD)is suitable for the treatment of primary liver cancer,especially early and middle primary liver cancer.This compound can reduce tumors and improve immune function.However,the side effects of NCTD have limited its application.There is a marked need to reduce the side effects and increase the efficacy of NCTD.AIM To develop a nanomaterial carrier,NCTD-loaded metal-organic framework IRMOF-3 coated with a temperature-sensitive gel(NCTD-IRMOF-3-Gel),aiming to improve the anticancer activity of NCTD and reduce the drug dose.METHODS NCTD-IRMOF-3-Gel was obtained by a coordination reaction.The apparent characteristics and in vitro release of NCTD-IRMOF-3-Gel were investigated.Cell cytotoxicity assays,flow cytometry,and apoptosis experiments in mouse hepatoma(Hepa1-6)cells were used to determine the anti-liver cancer activity of NCTD-IRMOF-3-Gel in in vitro models.RESULTS The particle size of NCTD-IRMOF-3-Gel was 50-100 nm,and the particle size distribution was uniform.The release curve showed that NCTD-IRMOF-3-Gel had an obvious sustained-release effect.The cytotoxicity assays showed that the free drug NCTD and NCTD-IRMOF-3-Gel treatments markedly inhibited Hepa1-6 cell proliferation,and the inhibition rate increased with increasing drug concentration.By flow cytometry,NCTD-IRMOF-3-Gel was observed to block the Hepa1-6 cell cycle in the S and G2/M phases,and the thermosensitive gel nanoparticles may inhibit cell proliferation by inducing cell cycle arrest.Apoptosis experiments showed that NCTD-IRMOF-3-Gel induced the apoptosis of Hepa1-6 cells.CONCLUSION Our results indicated that the NCTD-IRMOF-3-Gel may be beneficial for liver cancer disease treatment.

Construction and Genetic Analysis of Murine Hepatitis Virus Strain A59 Nsp16 Temperature Sensitive Mutant and the Revertant Virus

Coronaviruses (CoVs) are generally associated with respiratory and enteric infections and have long been recognized as important pathogens of livestock and companion animals. Mouse hepatitis virus (MHV) is a widely studied model system for Coronavirus replication and pathogenesis. In this study,we created a MHV-A59 temperature sensitive (ts) mutant Wu"-ts18(cd) using the recombinant vaccinia reverse genetics system. Virus replication assay in 17C1-1 cells showed the plaque phenotype and replication characterization of constructed Wu"-ts18(cd) were indistinguishable from the reported ts mutant Wu"-ts18. Then we cultured the ts mutant Wu"-ts18(cd) at non-permissive temperature 39.5°C,which "forced" the ts recombinant virus to use second-site mutation to revert from a ts to a non-ts phenotype. Sequence analysis showed most of the revertants had the same single amino acid mutation at Nsp16 position 43. The single amino acid mutation at Nsp16 position 76 or position 130 could also revert the ts mutant Wu"-ts18 (cd) to non-ts phenotype,an additional independent mutation in Nsp13 position 115 played an important role on plaque size. The results provided us with genetic information on the functional determinants of Nsp16. This allowed us to build up a more reasonable model of CoVs replication-transcription complex.

Recent advances in ultrasound-controlled fluorescence technology for deep tissue optical imaging

Fluorescence imaging is a noninvasive and dynamic real-time imaging technique;however,it exhibits poor spatial resolution in centimeter-deep tissues because biological tissues are highly scattering media for optical radiation.The recently developed ultrasound-controlled fluorescence(UCF)imaging is a novel imaging technique that can overcome this bottleneck.Previous studies suggest that the effective contrast agent and sensitive imaging system are the two pivotal factors for generating high-resolution UCF images ex vivo and/or in vivo.Here,this review highlights the recent advances(2015e2020)in the design and synthesis of contrast agents and the improvement of imaging systems to realize high-resolution UCF imaging of deep tissues.The imaging performances of various UCF systems,including the signal-to-noise ratio,imaging resolution,and imaging depth,are specifically discussed.In addition,the challenges and prospects are highlighted.With continuously increasing research interest in this field and emerging multidisciplinary applications,UCF imaging with higher spatial resolution and larger imaging depth may be developed shortly,which is expected to have a far-reaching impact on disease surveillance and/or therapy.

A Research on the Behavior of a Polyurethane Polymer Waterproof Material Used in Bridge Geotechnical Applications

Polyurethane is enjoying a widespread use as a polymer-based waterproof material in civil engineering In the present study we consider a temperature-sensitive waterproof and moisture-permeable polyurethane material(PTPE-PU)characterized by one or more phase transition temperatures(critical temperatures).Near the critical temperature,the waterproof and moisture permeability of polyurethane undergo abrupt changes.The related stability,thermal performance,water resistance,hydrostatic pressure,and moisture permeability are investigated here considering a PTPE-PU traditionally used in bridge geotechnical engineering.The results show that the moisture permeability of the coated bridge rock and soil undergo sudden variations near the crystallization and melting temperature of the soft segment.The moisture permeability is 3000 g/(m^(2)d).The hydrostatic pressure of the coated bridge rock and soil is 3.5 kPa.

Preparation and characterization of N-isopropylacrylamide/carboxymethylated chitosan hydrogel

Poly （N-isopropylacrylamide） （PNIPAAm）/carboxymethylated chitosan （CMCH） hydrogels were prepared by irradiating the aqueous solution mixture of NIPAAm and CMCH by 60 Co γ-ray.The effects of feed ratio of NIPAAm and CMCH,temperature,pH and ionic strength on the swelling ratio of PNIPAAm/CMCH hydrogels were studied.The results show that the addition of CMCH shifts the lower critical solution temperature （LCST） of the PNIPAAm hydrogel to higher temperature.The PNIPAAm/CMCH hydrogel displays not only pH-and thermo-sensitivity,but also ion-sensitivity.Differential scanning calorimetry （DSC） was applied for the determination of the LCST of the hydrogel.

A pH-and temperature-sensitive macrocyclic graft copolymer composed of PEO ring and multi-poly(2-(dimethylamino) ethyl methacrylate) lateral chains

A novel method for the synthesis of macrocyclic graft copolymers was developed through combination of anionic ring-opening polymerization (AROP) and atom transfer radical polymerization (ATRP).A linear α,ω-dihydroxyl poly(ethylene oxide) with pendant acetal protected hydroxyl groups (l-poly(EO-co-EEGE)) was prepared first by the anionic copolymerization of ethylene oxide (EO) and ethoxyethyl glycidyl ether (EEGE).Then l-poly(EO-co-EEGE) was cyclized.The crude cyclized product containing the linear byproduct was hydrolyzed and purified by being treated with α-CD.The pure cyclic copolymer [c-poly(EO-co-Gly)] was esterified by reaction with 2-bromoisobutyryl bromide,and then used as ATRP macroinitiators to initiate polymerization of 2-(dimethylamino) ethyl methacrylate (DMAEMA),and a series of pH-and temperature-sensitive macrocyclic graft copolymers composed of a hydrophilic PEO as the ring and PDMAEMA as side chains (c-PEO-g-PDMAEMA) were obtained.The behavior of pH-and temperature-sensitive macrocyclic copolymers was studied in aqueous solution by fluorescence and dynamic light scattering (DLS).The critical micellization pH values of macrocyclic graft copolymers and their corresponding linear graft copolymers (l-PEO-g-PDMAEMA) were measured.Under the same conditions,the cyclic graft copolymer with the shorter side chains gave the higher critical micellization pH value.The c-PEO-g-PDMAEMA showed the lower critical micellization pH value than the corresponding l-PEO-g-PDMAEMA.The average hydrodynamic diameters (Dh) of the micelles were measured by DLS with the variation of the aqueous solution pH value and temperature.

Synthesis and Characterization of Temperature-sensitive Cellulose-graftPoly(N-isopropylacrylamide) Copolymers

A new series of cellulose-graft-poly（N-isopropylacrylamide） （cellulose-g-PNIPAM） copolymers were prepared by atom transfer radical polymerization （ATRP） of N-isopropylacrylamide monomers from a cellulose-based macro-initiator, which was homogeneously synthesized in an ionic liquid 1-allyl-3-methylimidazolium chloride （AmimC1）. The composition of cellulose-g-PNIPAM copolymers could be adjusted by altering the feeding ratio and reaction time. The resultant copolymers with relatively high content of PNIPAM segments （molar substitution of PNIPAM ≥ 18.3） were soluble in water at room temperature. Aqueous solutions of cellulose-g-PNIPAM copolymers exhibited clear temperature-sensitive behavior, and their sol-to-gel phase transition properties were investigated by dynamic light scattering （DLS） and UV measurements. Compared with pure PNIPAM, the cellulose-g-PNIPAM copolymers possessed higher lower critical solution temperatures （LCST） in a range from 36.9 ℃ to 40.8 ℃, which are close to normal human body temperature, and could be tuned by adjusting the content of PNIPAM segments in copolymers. Spherical structure of cellulose-g-PNIPAM copolymers formed at temperatures above LCST and its morphology was observed by TEM and SEM. These novel cellulose-g-PNIPAM copolymers may be attractive substrates for some biomedical applications, such as drug release and tissue engineering.

Novel dual fluorescence temperature-sensitive chameleon DNA-templated silver nanocluster pair for intracellular thermometry

For the first time, we are reporting a novel type of dual fluorescence temperaturesensitive DNA-templated silver nanocluster （AgNC） pair, which contains two pieces of single-stranded AgNC in proximity through hybridization. Both the chameleon AgNC pairs, A-NCP and B-NCP, possess two bright fluorescence peaks that achieve sensitive variations corresponding to temperature change from 15 to 45 ℃. With the increase in temperature, one of the fluorescence emissions of A-NCP （A-FL570） increases, while the other （A-FL640） decreases. However, both the emissions of B-NCP （B-FL685 and B-FL620） decrease simultaneously. Therefore, A-NCP shows a remarkable fluorescence color variation from orange to yellow, while the fluorescence color of B-NCP changes from orange to colorless, with increase in temperature. Moreover, the temperature responding linear range of A-NCP can be regulated by adjusting the structures and sequences of assistant DNA templates. It is assumed that the two single-stranded segmental AgNCs are integrated together as they are assembled into AgNC pairs, leading to a dramatic variation in fluorescence properties. The temperature-sensitive phenomenon is due to the dehybridization-induced separation of two pieces of segmental AgNC, caused by temperature increase. The temperature-sensitive AgNC pairs have been successful in indicating the temperature of living cells, showing the potential for a new application of silver nanocluster as a nanothermometer with adjustable response range, bringing novel insight into the regulatory mechanism of AgNC fluorescence variation.

Particle image velocimetry for an automatic cooling device using temperature-sensitive magnetic fluid

An automatic cooling device has been developed by using a temperature-sensitive magnetic fluid as the coolant. A particle image velocimetry (PIV) system was used to measure the flow velocity of the fluid inside the loop. The efficiency of the device under varying conditions such as the heat load and the power of cooling were ex- perimentally investigated. The effect of cooperation between external magnetic field and thermal field on the performance of the device was studied. As expected, a continuous flow induced by the thermal and magnetic field was observed in the loop, where heat was transferred by the circulating magnetic fluid. The synergic effect between the magnetic field and the temperature gradient has impact on the performance of the device.