In this paper,we review computational approaches to optimization problems of inhomogeneous rods and plates.We consider both the optimization of eigenvalues and the localization of eigenfunctions.These problems are mot...In this paper,we review computational approaches to optimization problems of inhomogeneous rods and plates.We consider both the optimization of eigenvalues and the localization of eigenfunctions.These problems are motivated by physical problems including the determination of the extremum of the fundamental vibration frequency and the localization of the vibration displacement.We demonstrate how an iterative rearrangement approach and a gradient descent approach with projection can successfully solve these optimization problems under different boundary conditions with different densities given.展开更多
Since ancient times,lightning disasters have undoubtedly been an unstoppable threat to humanity.During thunderstorms,lightning often damages objects on the ground,such as buildings and structures.Since Franklin invent...Since ancient times,lightning disasters have undoubtedly been an unstoppable threat to humanity.During thunderstorms,lightning often damages objects on the ground,such as buildings and structures.Since Franklin invented the lightning rod in 1752,lightning rods have been used worldwide to prevent direct lightning strikes in various fields such as high-voltage power transmission lines,outdoor chemical sites,highways,land and sea wind farms,and forest lightning fire protection.It has been proven that lightning accidents still occur frequently in places where lightning rods are installed and the protective angle method is used.In order to further study the protective effect of lightning rods and identify the shortcomings of lightning rod protection,negative lightning strikes are taken as the research object,to analyze the limitations of lightning rods in preventing direct lightning strikes from the working principle of lightning rods.展开更多
The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault lo...The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.展开更多
The anisotropic absorption and emission from semiconductor CdSe/CdS quantum rods(QRs)provide extra benefits among other photoluminescence nanocrystals.Using photo-induced alignment technique,the QRs can be oriented in...The anisotropic absorption and emission from semiconductor CdSe/CdS quantum rods(QRs)provide extra benefits among other photoluminescence nanocrystals.Using photo-induced alignment technique,the QRs can be oriented in liquid crystal polymer matrix at a large scale.In this article,a 2D Dammann grating pattern,within“SKL”characters domains aligned QRs in composite film,was fabricated by multi-step photo exposure using several photo masks,and a continuous geometric lens profile pattern aligned QRs was realized by the single step polarization converting holographic irradiation method.Both polarized optical microscope and fluorescence microscope are employed to determine the liquid crystal director profiles and QRs anisotropic excitation properties.We have been able to orient the QRs in fine binary and continuous patterns that confirms the strong quantum rod aligning ability of the proposed method.Thus,the proposed approach paves a way for photoinduced flexible QRs alignments to provide a highly specific and difficult-to-replicate security application at a large scale.展开更多
As an important lightning protection device in substations,lightning rods are susceptible to vibration and potential structural damage under wind loads.In order to understand their vibration mechanism,it is necessary ...As an important lightning protection device in substations,lightning rods are susceptible to vibration and potential structural damage under wind loads.In order to understand their vibration mechanism,it is necessary to conduct flow analysis.In this study,numerical simulations of the flow field around a 330 kV cylindrical lightning rod with different diameters were performed using the SST k-ωmodel.The flow patterns in different segments of the lightning rod at the same reference wind speed(wind speed at a height of 10 m)and the flow patterns in the same segment at different reference wind speeds were investigated.The variations of lift coefficient,drag coefficient,and vorticity distribution were obtained.The results showed that vortex shedding phenomena occurred in all segments of the lightning rod,and the strength of vortex shedding increased with decreasing diameter.The vorticity magnitude and the root mean square magnitudes of the lift coefficient and drag coefficient also increased accordingly.The time history curves of the lift coefficient and drag coefficient on the surface of the lightning rod exhibited sinusoidal patterns with a single dominant frequency.For the same segment,as the wind speed increased in a certain range,the root mean square values of the lift coefficient and drag coefficient decreased,while their dominant frequencies increased.Moreover,there was a proportional relationship between the dominant frequencies of the lift coefficient and drag coefficient.The findings of this study can provide valuable insights for the refined design of lightning rods with similar structures.展开更多
Chronic inflammation associated with hepatitis C virus(HCV) infection can lead to disabling liver diseases with progression to liver cirrhosis and hepatocellular carcinoma. Despite the recent availability of more effe...Chronic inflammation associated with hepatitis C virus(HCV) infection can lead to disabling liver diseases with progression to liver cirrhosis and hepatocellular carcinoma. Despite the recent availability of more effective and less toxic therapeutic options, in most parts of the world the standard treatment consists of a weekly injection of pegylated interferon α(IFN-α) together with a daily dose of ribavirin. HCV patients frequently present circulating non-organ-specific autoantibodies demonstrating a variety of staining patterns in the indirect immunofluorescence assay for antinuclear antibodies(ANA). Between 20% to 40% of HCV patients treated with IFN-α and ribavirin develop autoantibodies showing a peculiar ANA pattern characterized as rods and rings(RR) structures. The aim of this article is to review the recent reports regarding RR structures and anti-rods/rings(antiRR) autoantibody production by HCV patients after IFN-α/ribavirin treatment. Anti-RR autoantibodies first appear around the sixth month of treatment and reach a plateau around the twelfth month. After treatment completion, anti-RR titers decrease/disappear in half the patients and remain steady in the other half. Some studies have observed a higher frequency of anti-RR antibodies in relapsers, i.e., patients in which circulating virus reappears after initially successful therapy. The main target of anti-RR autoantibodies in HCV patients is inosine-5'-monophosphate dehydrogenase 2(IMPDH2), the rate-limiting enzyme involved in the guanosine triphosphate biosynthesis pathway. Ribavirin is a direct IMPDH2 inhibitor and is able to induce the formation of RR structures in vitro and in vivo. In conclusion, these observations led to the hypothesis that anti-RR autoantibody production is a human model of immunologic tolerance breakdown that allows us to explore the humoral autoimmune response from the beginning of the putative triggering event: exposure to ribavirin and interferon.展开更多
Unsteady wake from upstream components of landing gear impinging on downstream components could be a strong noise source.The use of a plane jet is proposed to reduce this flow-induced noise.Tandem rods with different ...Unsteady wake from upstream components of landing gear impinging on downstream components could be a strong noise source.The use of a plane jet is proposed to reduce this flow-induced noise.Tandem rods with different gap widths were utilized as the test body.Both acoustic and aerodynamic tests were conducted in order to validate this technique.Acoustic test results proved that overall noise emission from tandem rods could be lowered and tonal noise could be removed with use of the plane jet.However,when the plane jet was turned on,in some frequency range it could be the subsequent main contributor instead of tandem rods to total noise emission whilst in some frequency range rods could still be the main contributor.Moreover,aerodynamic tests fundamentally studied explanations for the noise reduction.Specifically,not only impinging speed to rods but speed and turbulence level to the top edge of the rear rod could be diminished by the upstream plane jet.Consequently,the vortex shedding induced by the rear rod was reduced,which was confirmed by the speed,Reynolds stress as well as the velocity fluctuation spectral measured in its wake.This study confirmed the potential use of a plane jet towards landing gear noise reduction.展开更多
Structural deterioration in the roof in an underground mine can easily cause roof fall, and deterioration is difficult to detect. When drilling holes for roof bolts, there is a relationship between the vibration of th...Structural deterioration in the roof in an underground mine can easily cause roof fall, and deterioration is difficult to detect. When drilling holes for roof bolts, there is a relationship between the vibration of the drill rod and the properties of the rock being drilled. This paper analyzes transverse, longitudinal, and torsional vibrations in the drill rod by using vibration theory. Characteristic indexes for three kinds of vibration are determined. Using the finite element analysis software ABAQUS, a model for drill rod vibration during the drilling of roof bolt holes was established based on the geological and mining conditions in the Guyuan Coal Mine, northern China. Results from the model determined that the transverse and the longitudinal vibration decrease as the rock hardness decreases. In descending order, sandstone,sandy mudstone, mudstone, and weak interbeds cause progressively less vibration when being drilled.The ranking for strata that cause decreasing torsional vibration is slightly different, being, in descending order, mudstone, sandstone, sandy mudstone, and weak interbeds. These results provide a theoretical basis for predicting dangerous roof conditions and the presence of weak interbeds to allow for adjusting bolt support schemes.展开更多
On the basis of classical linear theory on longitudinal, torsional and flexural waves in thin elastic rods, and taking finite deformation and dispersive effects into consideration, three kinds of nonlinear evolution e...On the basis of classical linear theory on longitudinal, torsional and flexural waves in thin elastic rods, and taking finite deformation and dispersive effects into consideration, three kinds of nonlinear evolution equations are derived. Qualitative analysis of three kinds of nonlinear equations are presented. It is shown that these equations have homoclinic or heteroclinic orbits on the phase plane, corresponding to solitary wave or shock wave solutions, respectively. Based on the principle of homogeneous balance, these equations are solved with the Jacobi elliptic function expansion method. Results show that existence of solitary wave solution and shock wave solution is possible under certain conditions. These conclusions are consistent with qualitative analysis.展开更多
Starling with the L- and D,L-lactide copolymer (L:DL = 9:1) [P(L-DL)LA] of M-W = 32.1 x 10(4), rods were obtained through a two stage process: (1) melt-extrusion at 155 degreesC, and (2) hot-drawing at 90 degreesC to ...Starling with the L- and D,L-lactide copolymer (L:DL = 9:1) [P(L-DL)LA] of M-W = 32.1 x 10(4), rods were obtained through a two stage process: (1) melt-extrusion at 155 degreesC, and (2) hot-drawing at 90 degreesC to various drawing ratios. The molecular weight of P(L-DL)LA fell to 9.3 x 10(4) as a consequence of the production process. The crystallization and molecular orientation of P(L-DL)LA developed as a result of the hot-drawing. The mechanical strengths of the rods increase with the drawing ratio; The maximum for tensile strength, bending strength, bending modulus, and shear strength are 329 MPa, 237 MPa, 8.8 GPa, and 157 MPa, respectively.展开更多
Based on the nonlinear geometric theory of extensible rods, an exact mathematical model of thermal post_buckling behavior of uniformly heated elastic rods with axially immovable ends is developed, in which the arc len...Based on the nonlinear geometric theory of extensible rods, an exact mathematical model of thermal post_buckling behavior of uniformly heated elastic rods with axially immovable ends is developed, in which the arc length s(x) of axial line and the longitudinal displacement u(x) are taken as the basic unknown functions. This is a two point boundary value problem of first order ordinary differential equations with strong non_linearity. By using shooting method and analytical continuation, the nonlinear boundary value problems are numerically solved. The thermal post_buckled states of the rods with transversely simply supported and clamped ends are obtained respectively and the corresponding numerical data tables and characteristic curves are also given.展开更多
A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S...A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S, depending upon initial impact velocity, there exist three types of penetration, namely, penetration by a rigid long rod, penetration by a deforming non-erosive long rod and penetration by an erosive long rod. If the impact velocity of the penetrator is higher than the hydrodynamic velocity (VH), it will penetrate the target in an erosive mode; if the impact velocity lies between the hydrodynamic velocity (VH) and the rigid body velocity (VR), it will penetrate the target in a deformable mode; if the impact velocity is less than the rigid body velocity (VR), it will penetrate the target in a rigid mode. The critical conditions for the transition among these three penetration modes are proposed. It is demonstrated that the present model predictions correlate well with the experimental observations in terms of depth of penetration (DOP) and the critical transition conditions.展开更多
In this study, a combined experimental, numerical and theoretical investigation is conducted on the penetration of semi-infinite 4340 steel targets by a homogeneous 93 W rod and two types of jacketed rods with strikin...In this study, a combined experimental, numerical and theoretical investigation is conducted on the penetration of semi-infinite 4340 steel targets by a homogeneous 93 W rod and two types of jacketed rods with striking velocities of 0.9-3.3 km/s. The results show that the jacketed rods produced typical“co-erosion” damage at all test velocities, except for the 93 W/1060 Al jacketed rod, which switched from an early “bi-erosion” damage to later “co-erosion” damage at a striking velocity of 936 m/s. However, the homogeneous 93 W rod always forms a large mushroom head during the penetration process. The damage mechanisms of these two types of jacketed rods differ for striking velocities of 0.9-2.0 km/s, but this difference gradually decreases with increased striking velocity. For velocities of 2.0-3.3 km/s, all three types of projectiles exhibit typical hydrodynamic penetration characteristics, and the damage mechanisms of the two types of jacketed rods are almost identical. For the same initial kinetic energy, the penetration performance of the jacketed rods is distinctly superior to that of the homogeneous 93 W rods.Compared with jacket density, jacket strength shows a more significant influence on the damage mechanism and penetration performance of the jacketed rod. Finally, an existing theoretical prediction model of the penetration depth of jacketed rods on semi-infinite targets in the co-erosion mode is modified. It transpires that-in terms of penetration depth-the modified theoretical model is in good agreement with the experimental and numerical observations for 93 W/TC4 and 93 W/1060 Al jacketed rods penetrating semi-infinite 4340 steel targets.展开更多
This article is concerned with finite element implementations of the three- dimensional geometrically exact rod. The special attention is paid to identifying the con- dition that ensures the frame invariance of the re...This article is concerned with finite element implementations of the three- dimensional geometrically exact rod. The special attention is paid to identifying the con- dition that ensures the frame invariance of the resulting discrete approximations. From the perspective of symmetry, this requirement is equivalent to the commutativity of the employed interpolation operator I with the action of the special Euclidean group SE(3), or I is SE(3)-equivariant. This geometric criterion helps to clarify several subtle issues about the interpolation of finite rotation. It leads us to reexamine the finite element for- mulation first proposed by Simo in his work on energy-momentum conserving algorithms. That formulation is often mistakenly regarded as non-objective. However, we show that the obtained approximation is invariant under the superposed rigid body motions, and as a corollary, the objectivity of the continuum model is preserved. The key of this proof comes from the observation that since the numerical quadrature is used to compute the integrals, by storing the rotation field and its derivative at the Gauss points, the equiv- ariant conditions can be relaxed only at these points. Several numerical examples are presented to confirm the theoretical results and demonstrate the performance of this al- gorithm.展开更多
We present a fast synchrotron X-ray tomography study of the packing structures of rods with different aspect ratios. Utilizing the high flux of the X-rays generated from the third-generation synchrotron source, we can...We present a fast synchrotron X-ray tomography study of the packing structures of rods with different aspect ratios. Utilizing the high flux of the X-rays generated from the third-generation synchrotron source, we can complete a high- resolution tomography scan within a short period of time, after which the three-dimensional (3D) packing structure can be obtained for the subsequent structural analysis. The image phase-retrieval procedure has been implemented to enhance the image contrast. We systematically investigated the effects of particle shape and aspect ratio on the structural properties including packing density and contact number. It turns out that large aspect ratio rod packings will have wider distributions of free volume fraction and larger mean contact numbers.展开更多
Treatment paradigms for Early Onset Scoliosis have changed from fusion to fusionless methods as the harmful effects of early fusion on the growing spine and thorax were realized. Magnetic rods are a recent addition to...Treatment paradigms for Early Onset Scoliosis have changed from fusion to fusionless methods as the harmful effects of early fusion on the growing spine and thorax were realized. Magnetic rods are a recent addition to fusionless technology for controlling scoliosis in a growing spine. The clinical evidence base on magnet driven growth rods(MDGR) has accumulated over the last 4 years. It has implications for reduction in the number of repeat surgeries required with similar complications as the traditional growth rods(TGR) and at a higher initial cost. However in terms of patient psyche and avoidance of repeat surgeries which are necessary with the TGR, MDGR treatment works out less expensive in the long run with definitely better patient comfort. The authors look at the available literature coupled with their own experience to discuss the current status, limitations and future prospects for this type of technology.展开更多
Y2O2S:Eu3+,Mg2+,Ti4+ nanorods were prepared by a solvothermal procedure.Rod-like Y(OH)3 was firstly synthesized by hydrothermal method to serve as the precursor.Y2O2S:Eu3+,Mg2+,Ti4+ powders were obtained by calcinatin...Y2O2S:Eu3+,Mg2+,Ti4+ nanorods were prepared by a solvothermal procedure.Rod-like Y(OH)3 was firstly synthesized by hydrothermal method to serve as the precursor.Y2O2S:Eu3+,Mg2+,Ti4+ powders were obtained by calcinating the precursor at CS2 atmosphere.The Y2O2S:Eu3+,Mg2+,Ti4+ phosphor with diameters of 30–50 nm and lengths up to 200–400 nm inherited the rod-like shape from the precursor after calcined at CS2 atmosphere.The Y2O2S:Eu3+,Mg2+,Ti4+ nanorods showed hexagonal pure phase,good dispersion and exhibite...展开更多
Passive periodic structures exhibit unique dynamic characteristics that make the passive periodic structures act as mechanical filters for wave propagation. As a result, wave can propagate along the periodic structure...Passive periodic structures exhibit unique dynamic characteristics that make the passive periodic structures act as mechanical filters for wave propagation. As a result, wave can propagate along the periodic structures only within specific frequency bands called the pass bands and wave propagation is completely blocked within other frequency bands called the “stop bands”. A theoretical method based on the transfer matrix formulation is developed in order to effectively investigate the influence of periodicity, variable geometry and material properties on the wave propagation characteristics of one-dimensional periodic rod. Several numerical examples are presented in order to illustrate their unique tunable filtering and localization characteristics. The experiments are conducted to verify the numerical predictions and to demonstrate the capability of the wavelet transform as a very powerful tool to uniquely identify and compare the energy distribution both in the time and frequency domain. The flexibility that the spectral width and location of the pass and stop bands can be tuned by introducing intentional variation in geometric and material properties for the individual substructure or cell is identified completely by both numerical predictions and experimental results. The results demonstrate the potential of such one-dimensional periodic structure in controlling the dynamics of wave propagation as a mechanical filter such as engine mount, gearbox support strut and other applications.展开更多
To study the controlled effect of poly (lactic acid) (PLA), poly lactic-coglycolic (PLGA) and ethylenediamine (EDA)-maleic anhydride (MAH) modified PLA (EMPLA) for in vitro release of nestorone, rods were ...To study the controlled effect of poly (lactic acid) (PLA), poly lactic-coglycolic (PLGA) and ethylenediamine (EDA)-maleic anhydride (MAH) modified PLA (EMPLA) for in vitro release of nestorone, rods were prepared using the solvent evaporation method. Amount of drug release in vitro was determined by UV spectrophotometry. Effects of rods diameter, the molecular weight of PLA, the drug percentage and the hydrophilicity of polymers on the release of biodegradable nestorone rods in vitro were investigated. It is indicated that the controlled effect of the biodegradable rods for the release of nestorone in vitro is good. The amount of drug released every week from rods in different diameter is similar to one another. The amount of drug released every week and the accumulative drug released during 12 week were almost in direct proportion with the drug percentage of the rods. The amount of drug released every week is increased as the decreasing of PLA molecular weight. As the hydrophlicity of polymer is improved, the rate of drug release every week is accelerated. The studies show that the plausibility of controlled release of nestorone from PLA, PLGA and EMPLA rods imply the possibility of their application as a controlled delivery system for nestorone. The results show that the greater the molecular weight of PLA is, the slower its degradation is and the slower the drug released; the greater the percentage of nestorone is, the more quickly the drug release. An increase of the hydrophilicity of the polymers will increase their degradation rate and leads to a fast drug release. Anyhow, these rods systems should be further evaluated in vivo.展开更多
基金supported by the DMS-1853701supported in part by the DMS-2208373.
文摘In this paper,we review computational approaches to optimization problems of inhomogeneous rods and plates.We consider both the optimization of eigenvalues and the localization of eigenfunctions.These problems are motivated by physical problems including the determination of the extremum of the fundamental vibration frequency and the localization of the vibration displacement.We demonstrate how an iterative rearrangement approach and a gradient descent approach with projection can successfully solve these optimization problems under different boundary conditions with different densities given.
基金Supported by Lightning Multi-pulse Intelligent Monitoring System Optimization Technology Project of Guangdong Yuedian Dianbai Hot Water Wind Farm(SFC/DBW-Z-FW-23-006).
文摘Since ancient times,lightning disasters have undoubtedly been an unstoppable threat to humanity.During thunderstorms,lightning often damages objects on the ground,such as buildings and structures.Since Franklin invented the lightning rod in 1752,lightning rods have been used worldwide to prevent direct lightning strikes in various fields such as high-voltage power transmission lines,outdoor chemical sites,highways,land and sea wind farms,and forest lightning fire protection.It has been proven that lightning accidents still occur frequently in places where lightning rods are installed and the protective angle method is used.In order to further study the protective effect of lightning rods and identify the shortcomings of lightning rod protection,negative lightning strikes are taken as the research object,to analyze the limitations of lightning rods in preventing direct lightning strikes from the working principle of lightning rods.
基金the National Key Research and Development Program of China under Grant 2021YFB3301300the National Natural Science Foundation of China under Grant 62203213+1 种基金the Natural Science Foundation of Jiangsu Province under Grant BK20220332the Open Project Program of Fujian Provincial Key Laboratory of Intelligent Identification and Control of Complex Dynamic System under Grant 2022A0004.
文摘The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.
基金supported by the Guangdong Major Project of Basic and Applied Basic Research(No.2020B0301030009)the National Natural Science Foundation of China(Nos.62005180,61935013)+2 种基金the Zhejiang Lab Open Research Project(No.K2022MG0AB01)RGC of Hong Kong S.A.R.(No.26202019)the State Key Laboratory of Advanced Displays and Optoelectronics Technologies(HKUST)(No.ITC-PSKL12EG02)。
文摘The anisotropic absorption and emission from semiconductor CdSe/CdS quantum rods(QRs)provide extra benefits among other photoluminescence nanocrystals.Using photo-induced alignment technique,the QRs can be oriented in liquid crystal polymer matrix at a large scale.In this article,a 2D Dammann grating pattern,within“SKL”characters domains aligned QRs in composite film,was fabricated by multi-step photo exposure using several photo masks,and a continuous geometric lens profile pattern aligned QRs was realized by the single step polarization converting holographic irradiation method.Both polarized optical microscope and fluorescence microscope are employed to determine the liquid crystal director profiles and QRs anisotropic excitation properties.We have been able to orient the QRs in fine binary and continuous patterns that confirms the strong quantum rod aligning ability of the proposed method.Thus,the proposed approach paves a way for photoinduced flexible QRs alignments to provide a highly specific and difficult-to-replicate security application at a large scale.
基金supported by State Grid Ningxia Electric Power Co.,Ltd.under Grant 5229CG220006Natural Science Foundation of Ningxia Province under Grant 2022AAC03629.
文摘As an important lightning protection device in substations,lightning rods are susceptible to vibration and potential structural damage under wind loads.In order to understand their vibration mechanism,it is necessary to conduct flow analysis.In this study,numerical simulations of the flow field around a 330 kV cylindrical lightning rod with different diameters were performed using the SST k-ωmodel.The flow patterns in different segments of the lightning rod at the same reference wind speed(wind speed at a height of 10 m)and the flow patterns in the same segment at different reference wind speeds were investigated.The variations of lift coefficient,drag coefficient,and vorticity distribution were obtained.The results showed that vortex shedding phenomena occurred in all segments of the lightning rod,and the strength of vortex shedding increased with decreasing diameter.The vorticity magnitude and the root mean square magnitudes of the lift coefficient and drag coefficient also increased accordingly.The time history curves of the lift coefficient and drag coefficient on the surface of the lightning rod exhibited sinusoidal patterns with a single dominant frequency.For the same segment,as the wind speed increased in a certain range,the root mean square values of the lift coefficient and drag coefficient decreased,while their dominant frequencies increased.Moreover,there was a proportional relationship between the dominant frequencies of the lift coefficient and drag coefficient.The findings of this study can provide valuable insights for the refined design of lightning rods with similar structures.
基金Supported by Brazilian government research foundations National Council for Research and Technology and Coordination for the Improvement of Higher Education Personnel with research grant and scholarships processNo.9028-11-0+2 种基金No.305064/2011-8 and No.232711/2014-3Sao Paulo Government agency Sao Paulo State Research Foundation withprocess No.2011/12448-0both granted to Andrade LEC and Keppeke GD
文摘Chronic inflammation associated with hepatitis C virus(HCV) infection can lead to disabling liver diseases with progression to liver cirrhosis and hepatocellular carcinoma. Despite the recent availability of more effective and less toxic therapeutic options, in most parts of the world the standard treatment consists of a weekly injection of pegylated interferon α(IFN-α) together with a daily dose of ribavirin. HCV patients frequently present circulating non-organ-specific autoantibodies demonstrating a variety of staining patterns in the indirect immunofluorescence assay for antinuclear antibodies(ANA). Between 20% to 40% of HCV patients treated with IFN-α and ribavirin develop autoantibodies showing a peculiar ANA pattern characterized as rods and rings(RR) structures. The aim of this article is to review the recent reports regarding RR structures and anti-rods/rings(antiRR) autoantibody production by HCV patients after IFN-α/ribavirin treatment. Anti-RR autoantibodies first appear around the sixth month of treatment and reach a plateau around the twelfth month. After treatment completion, anti-RR titers decrease/disappear in half the patients and remain steady in the other half. Some studies have observed a higher frequency of anti-RR antibodies in relapsers, i.e., patients in which circulating virus reappears after initially successful therapy. The main target of anti-RR autoantibodies in HCV patients is inosine-5'-monophosphate dehydrogenase 2(IMPDH2), the rate-limiting enzyme involved in the guanosine triphosphate biosynthesis pathway. Ribavirin is a direct IMPDH2 inhibitor and is able to induce the formation of RR structures in vitro and in vivo. In conclusion, these observations led to the hypothesis that anti-RR autoantibody production is a human model of immunologic tolerance breakdown that allows us to explore the humoral autoimmune response from the beginning of the putative triggering event: exposure to ribavirin and interferon.
基金Project partially supported by the European Union FP7 Clean Sky Joint Technology Initiative“ALLEGRA”(Grant No.308225)
文摘Unsteady wake from upstream components of landing gear impinging on downstream components could be a strong noise source.The use of a plane jet is proposed to reduce this flow-induced noise.Tandem rods with different gap widths were utilized as the test body.Both acoustic and aerodynamic tests were conducted in order to validate this technique.Acoustic test results proved that overall noise emission from tandem rods could be lowered and tonal noise could be removed with use of the plane jet.However,when the plane jet was turned on,in some frequency range it could be the subsequent main contributor instead of tandem rods to total noise emission whilst in some frequency range rods could still be the main contributor.Moreover,aerodynamic tests fundamentally studied explanations for the noise reduction.Specifically,not only impinging speed to rods but speed and turbulence level to the top edge of the rear rod could be diminished by the upstream plane jet.Consequently,the vortex shedding induced by the rear rod was reduced,which was confirmed by the speed,Reynolds stress as well as the velocity fluctuation spectral measured in its wake.This study confirmed the potential use of a plane jet towards landing gear noise reduction.
基金the National Natural Science Foundation of China (Nos.51104055,51274087,51604094 and 51674098)
文摘Structural deterioration in the roof in an underground mine can easily cause roof fall, and deterioration is difficult to detect. When drilling holes for roof bolts, there is a relationship between the vibration of the drill rod and the properties of the rock being drilled. This paper analyzes transverse, longitudinal, and torsional vibrations in the drill rod by using vibration theory. Characteristic indexes for three kinds of vibration are determined. Using the finite element analysis software ABAQUS, a model for drill rod vibration during the drilling of roof bolt holes was established based on the geological and mining conditions in the Guyuan Coal Mine, northern China. Results from the model determined that the transverse and the longitudinal vibration decrease as the rock hardness decreases. In descending order, sandstone,sandy mudstone, mudstone, and weak interbeds cause progressively less vibration when being drilled.The ranking for strata that cause decreasing torsional vibration is slightly different, being, in descending order, mudstone, sandstone, sandy mudstone, and weak interbeds. These results provide a theoretical basis for predicting dangerous roof conditions and the presence of weak interbeds to allow for adjusting bolt support schemes.
基金Project supported by the National Natural Science Foundation of China (No.10772129)the Youth Science Foundation of Shanxi Province of China (No.2006021005)
文摘On the basis of classical linear theory on longitudinal, torsional and flexural waves in thin elastic rods, and taking finite deformation and dispersive effects into consideration, three kinds of nonlinear evolution equations are derived. Qualitative analysis of three kinds of nonlinear equations are presented. It is shown that these equations have homoclinic or heteroclinic orbits on the phase plane, corresponding to solitary wave or shock wave solutions, respectively. Based on the principle of homogeneous balance, these equations are solved with the Jacobi elliptic function expansion method. Results show that existence of solitary wave solution and shock wave solution is possible under certain conditions. These conclusions are consistent with qualitative analysis.
文摘Starling with the L- and D,L-lactide copolymer (L:DL = 9:1) [P(L-DL)LA] of M-W = 32.1 x 10(4), rods were obtained through a two stage process: (1) melt-extrusion at 155 degreesC, and (2) hot-drawing at 90 degreesC to various drawing ratios. The molecular weight of P(L-DL)LA fell to 9.3 x 10(4) as a consequence of the production process. The crystallization and molecular orientation of P(L-DL)LA developed as a result of the hot-drawing. The mechanical strengths of the rods increase with the drawing ratio; The maximum for tensile strength, bending strength, bending modulus, and shear strength are 329 MPa, 237 MPa, 8.8 GPa, and 157 MPa, respectively.
文摘Based on the nonlinear geometric theory of extensible rods, an exact mathematical model of thermal post_buckling behavior of uniformly heated elastic rods with axially immovable ends is developed, in which the arc length s(x) of axial line and the longitudinal displacement u(x) are taken as the basic unknown functions. This is a two point boundary value problem of first order ordinary differential equations with strong non_linearity. By using shooting method and analytical continuation, the nonlinear boundary value problems are numerically solved. The thermal post_buckled states of the rods with transversely simply supported and clamped ends are obtained respectively and the corresponding numerical data tables and characteristic curves are also given.
基金supported by the National Natural Science Foundation of China (10872195)
文摘A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S, depending upon initial impact velocity, there exist three types of penetration, namely, penetration by a rigid long rod, penetration by a deforming non-erosive long rod and penetration by an erosive long rod. If the impact velocity of the penetrator is higher than the hydrodynamic velocity (VH), it will penetrate the target in an erosive mode; if the impact velocity lies between the hydrodynamic velocity (VH) and the rigid body velocity (VR), it will penetrate the target in a deformable mode; if the impact velocity is less than the rigid body velocity (VR), it will penetrate the target in a rigid mode. The critical conditions for the transition among these three penetration modes are proposed. It is demonstrated that the present model predictions correlate well with the experimental observations in terms of depth of penetration (DOP) and the critical transition conditions.
基金supported by the National Natural Science Foundation of China(Grant nos.:11672138,11602113)Foundation of National Key Lab.of Transient Physics(Grant no.:6142604180407,JCKYS2020606004).
文摘In this study, a combined experimental, numerical and theoretical investigation is conducted on the penetration of semi-infinite 4340 steel targets by a homogeneous 93 W rod and two types of jacketed rods with striking velocities of 0.9-3.3 km/s. The results show that the jacketed rods produced typical“co-erosion” damage at all test velocities, except for the 93 W/1060 Al jacketed rod, which switched from an early “bi-erosion” damage to later “co-erosion” damage at a striking velocity of 936 m/s. However, the homogeneous 93 W rod always forms a large mushroom head during the penetration process. The damage mechanisms of these two types of jacketed rods differ for striking velocities of 0.9-2.0 km/s, but this difference gradually decreases with increased striking velocity. For velocities of 2.0-3.3 km/s, all three types of projectiles exhibit typical hydrodynamic penetration characteristics, and the damage mechanisms of the two types of jacketed rods are almost identical. For the same initial kinetic energy, the penetration performance of the jacketed rods is distinctly superior to that of the homogeneous 93 W rods.Compared with jacket density, jacket strength shows a more significant influence on the damage mechanism and penetration performance of the jacketed rod. Finally, an existing theoretical prediction model of the penetration depth of jacketed rods on semi-infinite targets in the co-erosion mode is modified. It transpires that-in terms of penetration depth-the modified theoretical model is in good agreement with the experimental and numerical observations for 93 W/TC4 and 93 W/1060 Al jacketed rods penetrating semi-infinite 4340 steel targets.
文摘This article is concerned with finite element implementations of the three- dimensional geometrically exact rod. The special attention is paid to identifying the con- dition that ensures the frame invariance of the resulting discrete approximations. From the perspective of symmetry, this requirement is equivalent to the commutativity of the employed interpolation operator I with the action of the special Euclidean group SE(3), or I is SE(3)-equivariant. This geometric criterion helps to clarify several subtle issues about the interpolation of finite rotation. It leads us to reexamine the finite element for- mulation first proposed by Simo in his work on energy-momentum conserving algorithms. That formulation is often mistakenly regarded as non-objective. However, we show that the obtained approximation is invariant under the superposed rigid body motions, and as a corollary, the objectivity of the continuum model is preserved. The key of this proof comes from the observation that since the numerical quadrature is used to compute the integrals, by storing the rotation field and its derivative at the Gauss points, the equiv- ariant conditions can be relaxed only at these points. Several numerical examples are presented to confirm the theoretical results and demonstrate the performance of this al- gorithm.
基金Project supported by the National Natural Science Foundation of China(Grant No.11175121)the National Basic Research Program of China(GrantNo.2010CB834301)supported by the U.S.DOE(Grant No.DE-AC02-06CH11357)
文摘We present a fast synchrotron X-ray tomography study of the packing structures of rods with different aspect ratios. Utilizing the high flux of the X-rays generated from the third-generation synchrotron source, we can complete a high- resolution tomography scan within a short period of time, after which the three-dimensional (3D) packing structure can be obtained for the subsequent structural analysis. The image phase-retrieval procedure has been implemented to enhance the image contrast. We systematically investigated the effects of particle shape and aspect ratio on the structural properties including packing density and contact number. It turns out that large aspect ratio rod packings will have wider distributions of free volume fraction and larger mean contact numbers.
文摘Treatment paradigms for Early Onset Scoliosis have changed from fusion to fusionless methods as the harmful effects of early fusion on the growing spine and thorax were realized. Magnetic rods are a recent addition to fusionless technology for controlling scoliosis in a growing spine. The clinical evidence base on magnet driven growth rods(MDGR) has accumulated over the last 4 years. It has implications for reduction in the number of repeat surgeries required with similar complications as the traditional growth rods(TGR) and at a higher initial cost. However in terms of patient psyche and avoidance of repeat surgeries which are necessary with the TGR, MDGR treatment works out less expensive in the long run with definitely better patient comfort. The authors look at the available literature coupled with their own experience to discuss the current status, limitations and future prospects for this type of technology.
基金supported by the National Natural Science Foundation of China (20671042, 50872045)the Natural Science Foundations of Guangdong Province (0520055, 7005918)
文摘Y2O2S:Eu3+,Mg2+,Ti4+ nanorods were prepared by a solvothermal procedure.Rod-like Y(OH)3 was firstly synthesized by hydrothermal method to serve as the precursor.Y2O2S:Eu3+,Mg2+,Ti4+ powders were obtained by calcinating the precursor at CS2 atmosphere.The Y2O2S:Eu3+,Mg2+,Ti4+ phosphor with diameters of 30–50 nm and lengths up to 200–400 nm inherited the rod-like shape from the precursor after calcined at CS2 atmosphere.The Y2O2S:Eu3+,Mg2+,Ti4+ nanorods showed hexagonal pure phase,good dispersion and exhibite...
基金Chongqing Municipal Natural Science Foundation of China (No.8426)
文摘Passive periodic structures exhibit unique dynamic characteristics that make the passive periodic structures act as mechanical filters for wave propagation. As a result, wave can propagate along the periodic structures only within specific frequency bands called the pass bands and wave propagation is completely blocked within other frequency bands called the “stop bands”. A theoretical method based on the transfer matrix formulation is developed in order to effectively investigate the influence of periodicity, variable geometry and material properties on the wave propagation characteristics of one-dimensional periodic rod. Several numerical examples are presented in order to illustrate their unique tunable filtering and localization characteristics. The experiments are conducted to verify the numerical predictions and to demonstrate the capability of the wavelet transform as a very powerful tool to uniquely identify and compare the energy distribution both in the time and frequency domain. The flexibility that the spectral width and location of the pass and stop bands can be tuned by introducing intentional variation in geometric and material properties for the individual substructure or cell is identified completely by both numerical predictions and experimental results. The results demonstrate the potential of such one-dimensional periodic structure in controlling the dynamics of wave propagation as a mechanical filter such as engine mount, gearbox support strut and other applications.
文摘To study the controlled effect of poly (lactic acid) (PLA), poly lactic-coglycolic (PLGA) and ethylenediamine (EDA)-maleic anhydride (MAH) modified PLA (EMPLA) for in vitro release of nestorone, rods were prepared using the solvent evaporation method. Amount of drug release in vitro was determined by UV spectrophotometry. Effects of rods diameter, the molecular weight of PLA, the drug percentage and the hydrophilicity of polymers on the release of biodegradable nestorone rods in vitro were investigated. It is indicated that the controlled effect of the biodegradable rods for the release of nestorone in vitro is good. The amount of drug released every week from rods in different diameter is similar to one another. The amount of drug released every week and the accumulative drug released during 12 week were almost in direct proportion with the drug percentage of the rods. The amount of drug released every week is increased as the decreasing of PLA molecular weight. As the hydrophlicity of polymer is improved, the rate of drug release every week is accelerated. The studies show that the plausibility of controlled release of nestorone from PLA, PLGA and EMPLA rods imply the possibility of their application as a controlled delivery system for nestorone. The results show that the greater the molecular weight of PLA is, the slower its degradation is and the slower the drug released; the greater the percentage of nestorone is, the more quickly the drug release. An increase of the hydrophilicity of the polymers will increase their degradation rate and leads to a fast drug release. Anyhow, these rods systems should be further evaluated in vivo.