Test Method for Refractoriness Under Load of Refractory Products(Non-differential,with Rising Temperature)

This standard specifies the definitions, theory, apparatus, specimens, procedures, test results and disposal, test error and report of test method for refractoriness under load of refractory products （non-differential, with rising temperature）.

Running‑In Behavior of Wet Multi‑plate Clutches:Introduction of a New Test Method for Investigation and Characterization

Wet multi-plate clutches are relevant components of modern drivetrain applications,not only in terms of function but also safety and comfort.Especially at the beginning of their lifetime,distinct changes of the friction behavior may occur and make the actuation of the clutch challenging.This transcript describes the typical running-in behavior of wet multi-plate clutches and gives a general definition for running-in of clutches.Moreover,a new test method to systematically investigate the running-in behavior of clutches is introduced.This test method contains a test procedure to characterize the running-in behavior on different load levels.Furthermore,a multi-stage procedure to evaluate and characterize the running-in behavior of clutches with mathematical approaches and new characteristic values is given.The quality of the test method is demonstrated on the example of three different tribological systems from dual clutch transmissions(DCT)and automatic transmissions(AT)application using paper friction linings.

Key stress extraction and equivalent test method for hybrid DC circuit breaker

Firstly, relevant stress properties of millisecond level breaking process and microsecond level commutation process of hybrid HVDC circuit breaker are studied in detail on the basis of the analysis for the application environment and topological structure and operating principles of hybrid circuit breakers, and key stress parameters in transient state process of two time dimensions are extracted. The established digital simulation circuit for PSCAD/EMTDC device-level operation of the circuit breaker has verified the stress properties of millisecond level breaking process and microsecond level commutation process. Then, equivalent test method, circuits and parameters based on LC power supply are proposed on the basis of stress extraction. Finally, the results of implemented breaking tests for complete 200 kV circuit breaker, 100 kV and 50 kV circuit breaker units, as well as single power electronic module have verified the accuracy of the simulation circuit and mathematical analysis. The result of this paper can be a guide to electrical structure and test system design of hybrid HVDC circuit breaker.

A New Test Method for Hot Abrasion Resistance on Refractories

Test methods for hot abrasion resistance of refractories in China and overseas were briefly introduced. A new test method for hot abrasion resistance was researched. The new method inherits test principle of cold abrasion resistance in Chinese standard totally, adopts compressed air pre-heating and electricity heating sam- ples, and is featured with complete structure, good con- trollability, simple operation, and small size. The characteristics and operating procedure of HAT-14A tester were introduced. The hot abrasion resistance of various refractories at different temperatures was tested.

Testing method of rock structural plane using digital drilling

The rock mass consists of rock blocks and structural planes,which can reduce its integrity and strength.Therefore,accurately obtaining the characteristics of the rock mass structural plane is a prerequisite for evaluating stability and designing supports in underground engineering.Currently,there are no effective testing methods for the characteristic parameters of the rock mass structural plane in underground engineering.The paper presents the digital drilling technology as a new testing method of rock mass structural planes.Flawed rock specimens with cracks of varying widths and angles were used to simulate the rock mass structural planes,and the multifunctional rock mass digital drilling test system was employed to carry out the digital drilling tests.The analysis focuses on the variation laws of drilling parameters,such as drilling pressure and drilling torque,affected by the characteristics of prefabricated cracks,and clarifies the degradation mechanism of rock equivalent compressive strength.Additionally,an identification model for the characteristic parameters of rock mass structural planes during drilling is established.The test results indicate that the average difference of the characteristics of prefabricated cracks identified by the equivalent compressive strength is 2.45°and 0.82 mm,respectively.The identification model while drilling is verified to be correct due to the high identification accuracy.Based on this,a method for testing the characteristic parameters of the surrounding rock structural plane while drilling is proposed.The research offers a theoretical and methodological foundation for precise in situ identification of structural planes of the surrounding rock in underground engineering.

Establishment of Microbial Limit Test Methods for Two Hospital Preparations

[Objectives] This study was conducted to establish microbial limit test methods for traditional Chinese medicine preparations Yunpi Granules and Bupi Qiangli Paste. [Methods] According to General Rules of Part IV of Chinese Pharmacopoeia, applicability tests were conducted on microbial limit test methods for the above two traditional Chinese medicine preparations by the plate method. [Results] The established methods showed recovery values in the range of 0.5-2.0 for both experimental strains, and the control bacteria could be detected in the experimental group, but not in the negative control group. [Conclusions] The microbial limit test methods were reliable for the two traditional Chinese medicine preparations and could be used for quality control.

Application of the extended Fourier amplitude sensitivity testing(FAST)method to inflated,axial stretched,and residually stressed cylinders

This paper is dedicated to applying the Fourier amplitude sensitivity test(FAST)method to the problem of mixed extension and inflation of a circular cylindrical tube in the presence of residual stresses.The metafunctions and the Ishigami function are considered in the sensitivity analysis(SA).The effects of the input variables on the output variables are investigated,and the most important parameters of the system under the applied pressure and axial force such as the axial stretch and the azimuthal stretch are determined.

A Review of Test Methods for the Determination of the Permeability Coefficient of Gravelly Soils Used for Embankment Dams

The factors influencing the permeability coefficient of gravelly soils used for the development of embankment dams(core wall)are analyzed.Such factors include(but are not limited to)soil size,anisotropy,density and boundary effects.A review of the literature is conducted and new directions of research are proposed.In such a framework,it is shown that gravelly soil with controlled density and vertical stress should be used to optimize the measurement of the vertical and horizontal permeability coefficients,respectively.

A comprehensive testing method for global stability analysis of high arch dams

Hydropower projects are rapidly developing in China at present, and a number of high daras and large reservoirs are currently under construction or will soon be built. These large projects are mainly located on the great rivers in West China with complicated topographical and geological conditions. Evaluation of stability and safety of these high dam projects is an important topic. Geomechanical model test is one of the main methods to study the global stability of high dam and foundation. In this paper, a comprehensive testing method that combines overloading and strength reduction in a model is proposed. In this method, both the influence of excessive flooding and the effects of strength reduction of rock masses and weak structural planes on dam stability are considered. Thus, the comprehensive testing method can accurately incorporate multiple factors that affect the global stability of high dam and its foundation. Based on the failure testing principle and model similarity theory, a similarity relation formula for safety evaluation through comprehensive test is established. A new model material, temperature-dependent analogous material, is also developed. By rising the temperature and reducing the strength of the mod,~l material, the mechanical behaviors resulting from gradual strength reduction can be simulated. Thus, the comprehensive testing method is realized in a single model. For case studies, the comprehensive geomechanical model test is conducted for Jinpinlg I and Xiaowan high arch dam projects.

A Mini Review on Testing Methods for Mechanical Properties of Natural Fibre Honeycomb Sandwich Structure and Fractography Analysis

This paper is a review of the past research of mechanical testing methods for natural fibre honeycomb sandwich structure as well as failure modes analysis at a microscopic level by using Scanning Electron Microscope (SEM). As the world is garnering attention towards renewable resources for environmental purposes, studies of natural fibre have been increasing as well as the application of natural fibre throughout various industries such as aerospace, automobiles, and construction sectors. This paper is started with brief information regarding the honeycomb sandwich structure, introduction to natural fibre, its applications as well as the factors affecting the performances of the structure. Next, the mechanical testing methods are listed out as well as the expected outcomes obtained from the respective testing. The mechanical properties are also identified by conducting lab tests according to the ASTM standard for sandwich and core structures. The microstructure of the deformed samples is then examined under Scanning Electron Microscope (SEM) by using different magnifications to study the failure mechanisms of the samples. The images obtained from the SEM test are analyzed by using fractography which will show the failure modes of the samples. This article is based on past research conducted by professional on the related topic.

Testing methods for 1100 kV UHVDC transformer

1 Development of UHVDC transmission capabilities The economical development of China is closely connected with safe and reliable power supply.Load centers e.g.in central and eastern China need huge amounts of electrical power.Available energy resources and consumption areas are often distributed inverse.As a consequence it is necessary to import electrical power to load center areas in an economic and efficient way.

A new interpretation and quantitative method for diplopia test： 304 cases of ocular motor nerve palsy for clinical test and verify

We introduce a new interpretation and quantitative method for computerized diplopia test. By comparing this new method to the Hess screen test, we validate its applicability among 304 patients with ocular motor nerve palsy. This new method shows great assistant value as the Hess screen test in making accurate diagnosis and quantitative evaluation the severity of diplopia. Furthermore, it is more convenient and suitable for daily clinical use.

Analysis on Effectiveness of Testing and Evaluation of Bridge Repair and Reinforcement

Bridge engineering is an important part of basic engineering in today’s transportation field,and its quality and performance have a vital impact on the improvement and development of modern transportation engineering.With the continuous development of transportation engineering,the maintenance and reinforcement of existing bridges are also being given more emphasis.In order to scientifically evaluate the effectiveness of bridge maintenance and reinforcement,this paper analyzes its detection and evaluation,including the significance,key points,and main methods of detection and evaluation.Therefore,this analysis aim to provide some reference for the maintenance and reinforcement and the quality improvement of bridge engineering.

Study on Test Methods for Flow Ability of Superfine Powder Extinguishing Agent

According to the physical and chemical characteristics of superfine powder extinguishing agent,three test methods are selected to measure the flow ability.By studying and comparing various test methods,apparatus and conditions,the optimum method and conditions to test flow property of superfine powder extinguishing agent are confirmed.

Dynamic test methods for natural frequency of footbridge

Using environmental random vibration as the excitation,traditional accelerometer method,non-contact video method and non-contact laser method were employed to determine the natural frequency of Kunyu River footbridge.All the results of these three methods are close to 2.70 Hz,which are concordant with each other and hence credible.

Research on the Computer Software Testing Method Based on Multiple Platforms

Informationization plays an important role in modern life and production.And various software is one of the bases for it.Before it goes into service,software needs to go through many steps,including software development,design,etc.In software development,test is the key to identify and control bugs and errors in the software.Therefore,software companies often test the software to ensure that it is qualified.In recent years,more attention has been paid to a multi-platform computer software testing method,which can make up for defects in traditional testing methods to improve test accuracy.Firstly,this paper illustrates the connotation and features of software testing.Secondly,common software testing platforms and their requirements are analyzed.Finally,this paper proposes software testing method based on multiple platforms.

Verification test on an innovated method for the studies on inheritance of resistance to rice sheath blight

We have recently developed a systematic method for the study on the inheritance of resistance to sheath blight. The key of the system is an innovated method of inoculation and investigation along with the employment of the permanent population. This paper reported the procedure of the system and the result of its verification.

Research on the Testing Methods of Instrumental System in the Marine Magnetic Survey

Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method brought out can effectively eliminate the systematic error caused by the instrumental system, and greatly improve the surveying precision and the reliability of the survey results.

Design of the Testing System for Jet Elements

To analyze the errors of processing data, the testing principle for jet elements is introduced and the property of testing system is theoretically and experimentally studied. On the basis of the above, the method of processing data is presented and the error formulae, which are the functions of the testing system property, are derived. Finally, the methods of reducing the errors are provided. The measured results are in correspondence with the theoretical conclusion.