The Process of a Laser-Supported Combustion Wave Induced by Millisecond Pulsed Laser on Aluminum Alloy

We study the process of a laser-supported combustion wave （LSCW） when an aluminum alloy is irradiated by a millisecond pulse laser based on the method of laser shadowgraphy. Under the condition of different laser parameters, the obtained results include the velocity, ignition threshold of LSCW and the variation law. The speed of LSCW increases with the laser energy under the same irradiation laser pulse width, and the speed of LSCW reduces with the increase of the laser pulse width under the same irradiation laser energy. Moreover, the ignition time of LSCW becomes shorter by increasing the laser number of the pulse and is not effected by changing the frequencies, when keeping the laser pulse width and energy unchanged. The results of the study can be applied in the laser propulsion technology and metal surface laser heat treatment, etc.

THE PROCESS OF THE EMULSIFIER-FREE POLYMERIZATION IN THE PRESENCE OF BARIUM SULFATE POWDER

The process of emulsifier-free copolymerization of the Styrene-Butyl Acrylate-K_sS_sO_s-water in the presence of Barium Sulfate(BS)powder was investigated under varied conditions within the range of BS powder quantity,initiator concentration and reaction temperature.Experimental results showed that the rate of polymerization is proportional to 0.3-power of the BS quantity and 1.3-power of the initiator concentration.There is a linear relationship of 2/3-power for the conversion and time.A process for the polymerization is propose to explain the experimental results.

Study on the importance of the infrastructure construction in the process of urbanization

This paper analyses the composition, the overall importance of city infrastructure construction and promote the city in the process of meaning. Then analysis the importance of city traffic infrastructure construction, the vanity of the city infrastructure and social infrastructure in the process of city, and puts forward relying on infrastructure construction to promote the urbanization development strategy.

Some Group Runs Based Multivariate Control Charts for Monitoring the Process Mean Vector

In this article, we propose two control charts namely, the “Multivariate Group Runs’ (MV-GR-M)” and the “Multivariate Modified Group Runs’ (MV-MGR-M)” control charts, based on the multivariate normal processes, for monitoring the process mean vector. Methods to obtain the design parameters and operations of these control charts are discussed. Performances of the proposed charts are compared with some existing control charts. It is verified that, the proposed charts give a significant reduction in the out-of-control “Average Time to Signal” (ATS) in the zero state, as well in the steady state compared to the Hotelling’s T2 and the synthetic T2 control charts.

Effects of GW5074 in the process of imDCs inducing differentiation of naive CD4^+ T cells into Treg cells in vitro

Objective To establish a stable and efficient method of culturing imDCs in vitro,and to explore the effect of GW5074,which blocks ERK1 /2 signal pathway in the process of immature dentritic cells ( imDCs) on inducing differentiation of the naive allogeneic CD4 + T

Calcium effect on the process of cold-hardening of rice seedlings

Low temperature is an important environmen-tal factor that limits the productivity and dis-tribution of plant. The ability to cold acclima-tion is a common adaptive response in plantsnative in temperate regions and results in en-hancing tolerance to chilling stress. In presentstudy the seedlings of Tesanai 2 were grown at28±1℃ and under a photo flux density (PFD)of 30μmol/m~2s for 8 d. The cold acclimationresponse is triggered by 14℃ under a PFD of75 μmol/m~2s for 3 d. Rice seedlings for cold-hardening were germinated from seeds treatedwith or without immersion in 30 mmol/L ofCaClsolution. Change of membrane systemprotection in leaves at various periods(viz:fol-lowing cold-hardening, chilling stress and onthe 3rd day of recovery), the ratio of survival

Near-infrared-reflection spectroscopy as measuring method to determine the state of the process for automatic control of anaerobic digestion

A recently developed control strategy for the anaerobic digestion process requires secure knowledge about the state of the process.The near infrared reflection spectroscopy(NIRS),provides the possibility to determine process parameters of the anaerobic digestion process online and directly at the digester.To investigate if the NIRS measurements can successfully be used for the characterization of the state of the process within the control strategy the control was operated on two experimental digesters.The NIR spectra were recorded during the experiments.The values of the process parameters(mainly concentrations of organic acids)obtained by NIRS differ from the values of the chemical analyses during the experiment.Nevertheless the state of the process is categorized equally on the basis of both measurement methods.It can consequently be stated that NIRS is expected to meet the requirements of the control strategy.

The research on the space-time coherence of Xianshuihe fault zone in the process of seismogeny

In this paper, a kind of data analysis method is used to research the space time coherence of Xianshuihe fault zone in the process of seimogeny. It is proved that, the space time coherence of Xianshuihe fault zone, in the process of seismogeny, really exists. The greater the earthquake magnitude of a fault section, the greater is its influence on the 'neighboring' sections. To a strike fault zone which bears compressive stress, the fault sections are 'series connected'. That is to say, once an earthquake happens on a fault section, the time of seismogeny in the neighboring fault sections will be shortened, therefore, this earthquake has 'an effect of hastening the occurrence of earthquakes in neighboring fault sections'. It is an inevitable rule for the Xianshuihe fault zone that the earthquake quiescent period and the earthquake active period occur alternatively. To the Xianshuihe fault zone, the slip predictable model does not tally with the actual situation, while the improved time predictable model tallies with the fact quite well. The data analysis method used here, which is used to examine the earthquake prediction models, is put forward on the basis of historical earthquake records. This kind of method and the relative conclusions have important reference value on the establishment of earthquake prediction models.

THE PROCESS APPROACH TO WRITING

IntroductionIn China.the method for teaching writing for science students is always regarded as most difficult.Howto teach writing and to comment on or mark students’writing are frequently discussed topics.In thispaper.I will report on what I have done in my writing class.Process ApproachThe‘process approach’to writing is not a new approach:it has been around since the early 1970s.It isalso called a‘multiple drafts process’and consists of generating ideas(pre-writing/input):writing a firstdraft with an emphasis on content(to‘discover’meaning/author’s ideas):writing second and third(andpossibly more)drafts to revise ideas and ways to communicate of these ideas.

Forgetting May Be Part of the Process of Remembering

遗忘能够帮助记忆吗?这一说法似乎有点自相矛盾。最近美国斯坦福大学的研究人员通过对20名青年学生进行单词记忆测验得出结论:把干扰信息遗忘掉,这样做有利于大脑记忆新的重要信息。当新旧信息堆积在一起时,大脑中某个区域会自动作出选择,忘掉过期的信息,以便更好地记住新信息,这个过程就好比打牌时选择出哪张牌一样。这一说法虽然新颖,却是可信的。

Control Factors and Diversities of Phase State of Oil and Gas Pools in the Kuqa Petroleum System

Based on the analysis of the hydrocarbon geochemical characteristics in the Kuqa petroleum system of the Tarim Basin, this study discusses the causes and controlling factors of the phase diversities and their differences in geochemical features. According to the characteristics and differences in oil and gas phase, the petroleum system can be divided into five categories： oil reservoir, wet gas reservoir, condensate gas-rich reservoir, condensate gas-poor reservoir and dry gas reservoir. The causes for the diversities in oil and gas phases include diversities of the sources of parent material, maturity of natural gas and the process of hydrocarbon accumulation of different hydrocarbon phases. On the whole, the Jurassic and Triassic terrestrial source rocks are the main sources for the hydrocarbon in the Kuqa Depression. The small differences in parent material may cause diversities in oil and gas amount, but the impact is small. The differences in oil and gas phase are mainly affected by maturity and the accumulation process, which closely relates with each other. Oil and gas at different thermal evolution stage can be captured in different accumulation process.

The PAD Class Teaching of Business English Translation

The author is constantly thinking of a problem that what kind of teaching method of Business English translation teaching should take in the course of teaching.In this paper,a new kind of teaching mode"PAD class"has been applied to explore the teaching of business English translation course,and to analyse the effect of classroom teaching.

Study of the blocking mechanism in gravel packing based on CFD-DEM

Gravel packing sand control(GPSC),as the optimization of mechanical sand control technology,is widely used in the deep water completion and sand control of loose sandstone heavy oil reservoirs and highly argillaceous.To explore the blocking mechanism of GPSC,the influence of its structural parameters on the blocking of GPSC is investigated.This paper establishes a particle element model based on computational fluid dynamics-discrete element method coupling using the discrete element method and establishes a fluid flow model combined with computational fluid dynamics to realize their full coupling solution.And sand control experiments were carried out using a micro visual sand control simulation device to verify the blocking model.The blocking mechanism is analyzed from the microscopic point of view,and then,the influence of sand control structure parameters on the blocking in GPSC design is evaluated.The results show the following:(1)the blocking process of GPSC can be divided into three stages:an initial stage,sand accumulation stage,and equilibrium stage.(2)There are two main types of gravel packing blockage.The first type of blocking is blocking on the surface of the gravel layer.Sand particles on the surface of gravel layer mainly exist in the form of large particle size blocking gravel pores and sand particles bridging each other.The second type of blockage is the blockage inside the gravel layer.Sand particles mainly exist in the form of internal mud cakes and adsorption on gravels inside the gravel layer.(3)To ensure the sand control performance of the gravel layer,the gravel layer thickness is designed between 23 and 28 mm.The displacement or pressure of the on-site packing pump should be increased to ensure that the gravel layer packing solidity ranges between 59%and 62%.In the design of GPSC,it should be ensured that the median particle size of gravel is 5–6 times the median particle size of sand.This study provides an effective technical reference for the design of gravel structural parameters in on-site gravel packing completion sand control.

Manufacture of Catalyst Systems for Ammonia Conversion

Platinum catalyst gauzes have been in use since the moment of development of the process of catalyst oxidation of ammonia for production of nitric acid or hydrocyanic acid.Catalyst gauzes are usually made of platinum or its alloys with rhodium and palladium.These precious metals have remarkable properties that make them ideal catalysts for acceleration of the ammonia/oxygen reaction.In 2008,OJSC "SIC 'Supermetal'" and Umicore AG&Co.KG launched a production line for Pt-alloy-based catalyst systems to be used for ammonia oxidation in the production of weak nitric acid.Catalyst systems consist of a pack of catalyst gauzes and a pack of catchment gauzes,which are made using flat-bed knitting machines and wire-cloth looms.Today,up-to-date catalyst systems MKSprecise TM are being manufactured,the basic advantages of which are an individual structure of gauzes and composition of the material,which allows to define precisely the position of each gauze in the catalyst pack,a high activity of the catalyst pack,direct catching of platinum and rhodium in the catalyst system,and a reasonable combination of single-and multilayer types of gauzes.This makes it possible to vary the configuration of the catalyst and select an optimum composition of the system to ensure the maximum efficiency of the ammonia oxidation process.We also produce the catchment systems that allow to find the best decision from the economic point view for each individual case.

Understanding Corporate Costs and Sustainability

This material aspires to start to evaluate every sorts of corporate cost form the view of modem corporation. Traditionally, there are material costs together with depreciation, salary cost, personal cost, financial cost, and other cost. For managerial purposes, this paper distinguishes between standard and nonstandard cost. Special attention is devoted to responsibility costs and division of costs. In this modem age, however it is a question whether the understanding of cost should be so narrow and limited to money that a corporation spends during the course of its production, or whether it should include also the constitution of negative externalities--the damages the company causes to the environment. Therefore, the final part of this contribution part deals with function of cost and attempts to provide an evaluation of basic sorts of cost in modem corporation from a broader societal perspective.

Interactive Optimization of Impressive Parameters Middling in Biological Leaching

In this study, single and interactive effect of three parameters, pH, ferrous and pulp concentration has been investigated by a 2^3 full factorial CCRD （central composite rotatable design） composed of eight factorial points, six central and six axial points. Initially, ＂none＂ mode from transformation subsection was chosen as the default choice for both responses, i.e. %recovery and gram of recovered zinc. Box-Cox plots give the best Lambda for each response （y^Lambda= f （A, B, C .....）） which occur at 1.91 and 2.16 for %recovey and gram of recovered zinc, respectively. A linear （y^1.91 = f （linear）） and a quadratic （y^2. 16= f （quadratic）） equation were suggested by software as the model for %recovery and gram of recovered zinc, respectively. Analysis of variance （ANOVA） for both models shows a high coefficient of determination （R^2）. In order to optimize and find the best conditions under which three parameters occur appropriately, optimization was done numerically. Desirability plots indicate properly that the best conditions occur at pH = 1.46, ferrous = 6.67 g/L, %pulp = 7.1 （%w/v）, %recovery = 86.5, gram of recovered zinc = 0.63 g and desirability = 0.777. Finally, PRP （progressive route of the process） analysis donates us a proper insight of what is happening during these 30 days. PRP analysis categorizes flasks in two parts, 1- flasks worth economically, 2- flasks with one-time-usable feed materials.

Markov branching processes with immigration-migration and resurrection

We consider a modified Markov branching process incorporating with both state-independent immigration-migration and resurrection. The effect of state-independent immigration-migration is firstly in- vestigated in detail. The explicit expressions for the extinction probabilities and mean extinction times are presented. The ergodicity and stability properties of the process incorporating with resurrection structure are then investigated. The conditions for recurrence, ergodicity and exponential ergodicity are obtained. An explicit expression for the equilibrium distribution is also presented. As a preparation, the criteria for regularity and uniqueness for such structure are firstly established.