Limit equilibrium method （LEM） and strength reduction method （SRM） are the most widely used methods for slope stability analysis. However, it can be noted that they both have some limitations in practical applicat...Limit equilibrium method （LEM） and strength reduction method （SRM） are the most widely used methods for slope stability analysis. However, it can be noted that they both have some limitations in practical application. In the LEM, the constitutive model cannot be considered and many assumptions are needed between slices of soil/rock. The SRM requires iterative calculations and does not give the slip surface directly. A method for slope stability analysis based on the graph theory is recently developed to directly calculate the minimum safety factor and potential critical slip surface according to the stress results of numerical simulation. The method is based on current stress state and can overcome the disadvantages mentioned above in the two traditional methods. The influences of edge generation and mesh geometry on the position of slip surface and the safety factor of slope are studied, in which a new method for edge generation is proposed, and reasonable mesh size is suggested. The results of benchmark examples and a rock slope show good accuracy and efficiency of the presented method.展开更多
Generation-based linguistic steganography is a popular research area of information hiding.The text generative steganographic method based on conditional probability coding is the direction that researchers have recen...Generation-based linguistic steganography is a popular research area of information hiding.The text generative steganographic method based on conditional probability coding is the direction that researchers have recently paid attention to.However,in the course of our experiment,we found that the secret information hiding in the text tends to destroy the statistical distribution characteristics of the original text,which indicates that this method has the problem of the obvious reduction of text quality when the embedding rate increases,and that the topic of generated texts is uncontrollable,so there is still room for improvement in concealment.In this paper,we propose a topic-controlled steganography method which is guided by graph-to-text generation.The proposed model can automatically generate steganographic texts carrying secret messages from knowledge graphs,and the topic of the generated texts is controllable.We also provide a graph path coding method with corresponding detailed algorithms for graph-to-text generation.Different from traditional linguistic steganography methods,we encode the secret information during graph path coding rather than using conditional probability.We test our method in different aspects and compare it with other text generative steganographic methods.The experimental results show that the model proposed in this paper can effectively improve the quality of the generated text and significantly improve the concealment of steganographic text.展开更多
Link prediction,also known as Knowledge Graph Completion(KGC),is the common task in Knowledge Graphs(KGs)to predict missing connections between entities.Most existing methods focus on designing shallow,scalable models...Link prediction,also known as Knowledge Graph Completion(KGC),is the common task in Knowledge Graphs(KGs)to predict missing connections between entities.Most existing methods focus on designing shallow,scalable models,which have less expressive than deep,multi-layer models.Furthermore,most operations like addition,matrix multiplications or factorization are handcrafted based on a few known relation patterns in several wellknown datasets,such as FB15k,WN18,etc.However,due to the diversity and complex nature of real-world data distribution,it is inherently difficult to preset all latent patterns.To address this issue,we proposeKGE-ANS,a novel knowledge graph embedding framework for general link prediction tasks using automatic network search.KGEANS can learn a deep,multi-layer effective architecture to adapt to different datasets through neural architecture search.In addition,the general search spacewe designed is tailored forKGtasks.We performextensive experiments on benchmark datasets and the dataset constructed in this paper.The results show that our KGE-ANS outperforms several state-of-the-art methods,especially on these datasets with complex relation patterns.展开更多
Chinese medicine(CM)diagnosis intellectualization is one of the hotspots in the research of CM modernization.The traditional CM intelligent diagnosis models transform the CM diagnosis issues into classification issues...Chinese medicine(CM)diagnosis intellectualization is one of the hotspots in the research of CM modernization.The traditional CM intelligent diagnosis models transform the CM diagnosis issues into classification issues,however,it is difficult to solve the problems such as excessive or similar categories.With the development of natural language processing techniques,text generation technique has become increasingly mature.In this study,we aimed to establish the CM diagnosis generation model by transforming the CM diagnosis issues into text generation issues.The semantic context characteristic learning capacity was enhanced referring to Bidirectional Long Short-Term Memory(BILSTM)with Transformer as the backbone network.Meanwhile,the CM diagnosis generation model Knowledge Graph Enhanced Transformer(KGET)was established by introducing the knowledge in medical field to enhance the inferential capability.The KGET model was established based on 566 CM case texts,and was compared with the classic text generation models including Long Short-Term Memory sequence-to-sequence(LSTM-seq2seq),Bidirectional and Auto-Regression Transformer(BART),and Chinese Pre-trained Unbalanced Transformer(CPT),so as to analyze the model manifestations.Finally,the ablation experiments were performed to explore the influence of the optimized part on the KGET model.The results of Bilingual Evaluation Understudy(BLEU),Recall-Oriented Understudy for Gisting Evaluation 1(ROUGE1),ROUGE2 and Edit distance of KGET model were 45.85,73.93,54.59 and 7.12,respectively in this study.Compared with LSTM-seq2seq,BART and CPT models,the KGET model was higher in BLEU,ROUGE1 and ROUGE2 by 6.00–17.09,1.65–9.39 and 0.51–17.62,respectively,and lower in Edit distance by 0.47–3.21.The ablation experiment results revealed that introduction of BILSTM model and prior knowledge could significantly increase the model performance.Additionally,the manual assessment indicated that the CM diagnosis results of the KGET model used in this study were highly consistent with the practical diagnosis results.In conclusion,text generation technology can be effectively applied to CM diagnostic modeling.It can effectively avoid the problem of poor diagnostic performance caused by excessive and similar categories in traditional CM diagnostic classification models.CM diagnostic text generation technology has broad application prospects in the future.展开更多
Essentially, it is significant to supply the consumer with reliable and sufficient power. Since, power quality is measured by the consistency in frequency and power flow between control areas. Thus, in a power system ...Essentially, it is significant to supply the consumer with reliable and sufficient power. Since, power quality is measured by the consistency in frequency and power flow between control areas. Thus, in a power system operation and control,automatic generation control(AGC) plays a crucial role. In this paper, multi-area(Five areas: area 1, area 2, area 3, area 4 and area 5) reheat thermal power systems are considered with proportional-integral-derivative(PID) controller as a supplementary controller. Each area in the investigated power system is equipped with appropriate governor unit, turbine with reheater unit, generator and speed regulator unit. The PID controller parameters are optimized by considering nature bio-inspired firefly algorithm(FFA). The experimental results demonstrated the comparison of the proposed system performance(FFA-PID)with optimized PID controller based genetic algorithm(GAPID) and particle swarm optimization(PSO) technique(PSOPID) for the same investigated power system. The results proved the efficiency of employing the integral time absolute error(ITAE) cost function with one percent step load perturbation(1 % SLP) in area 1. The proposed system based FFA achieved the least settling time compared to using the GA or the PSO algorithms, while, it attained good results with respect to the peak overshoot/undershoot. In addition, the FFA performance is improved with the increased number of iterations which outperformed the other optimization algorithms based controller.展开更多
The microgrid is a typical cyber-physical microgrid system(CPMS). The physical unconventional distributed generators(DGs) are intermittent and inverter-interfaced which makes them very different to control. The cyber ...The microgrid is a typical cyber-physical microgrid system(CPMS). The physical unconventional distributed generators(DGs) are intermittent and inverter-interfaced which makes them very different to control. The cyber components,such as the embedded computer and communication network,are equipped with DGs, to process and transmit the necessary information for the controllers. In order to ensure system-wide observability, controllability and stabilization for the microgrid,the cyber and physical component need to be integrated. For the physical component of CPMS, the droop-control method is popular as it can be applied in both modes of operation to improve the grid transient performance. Traditional droop control methods have the drawback of the inherent trade-off between power sharing and voltage and frequency regulation. In this paper, the global information(such as the average voltage and the output active power of the microgrid and so on) are acquired distributedly based on multi-agent system(MAS). Based on the global information from cyber components of CPMS, automatic generation control(AGC) and automatic voltage control(AVC)are proposed to deal with the drawback of traditional droop control. Simulation studies in PSCAD demonstrate the effectiveness of the proposed control methods.展开更多
Present day power scenarios demand a high quality uninterrupted power supply and needs environmental issues to be addressed. Both concerns can be dealt with by the introduction of the renewable sources to the existing...Present day power scenarios demand a high quality uninterrupted power supply and needs environmental issues to be addressed. Both concerns can be dealt with by the introduction of the renewable sources to the existing power system. Thus, automatic generation control(AGC) with diverse renewable sources and a modified-cascaded controller are presented in the paper.Also, a new hybrid scheme of the improved teaching learning based optimization-differential evolution(hITLBO-DE) algorithm is applied for providing optimization of controller parameters. A study of the system with a technique such as TLBO applied to a proportional integral derivative(PID), integral double derivative(IDD) and PIDD is compared to hITLBO-DE tuned cascaded controller with dynamic load change.The suggested methodology has been extensively applied to a 2-area system with a diverse source power system with various operation time non-linearities such as dead-band of, generation rate constraint and reheat thermal units. The multi-area system with reheat thermal plants, hydel plants and a unit of a wind-diesel combination is tested with the cascaded controller scheme with a different controller setting for each area. The variation of the load is taken within 1% to 5% of the connected load and robustness analysis is shown by modifying essential factors simultaneously by± 30%. Finally, the proposed scheme of controller and optimization technique is also tested with a 5-equal area thermal system with non-linearities. The simulation results demonstrate the superiority of the proposed controller and algorithm under a dynamically changing load.展开更多
基金support of the National Natural Science Foundation of China (Grant No. 41130751)China Scholarship Council, Research Program for Western China Communication (Grant No. 2011ZB04)China Central University Funding
文摘Limit equilibrium method （LEM） and strength reduction method （SRM） are the most widely used methods for slope stability analysis. However, it can be noted that they both have some limitations in practical application. In the LEM, the constitutive model cannot be considered and many assumptions are needed between slices of soil/rock. The SRM requires iterative calculations and does not give the slip surface directly. A method for slope stability analysis based on the graph theory is recently developed to directly calculate the minimum safety factor and potential critical slip surface according to the stress results of numerical simulation. The method is based on current stress state and can overcome the disadvantages mentioned above in the two traditional methods. The influences of edge generation and mesh geometry on the position of slip surface and the safety factor of slope are studied, in which a new method for edge generation is proposed, and reasonable mesh size is suggested. The results of benchmark examples and a rock slope show good accuracy and efficiency of the presented method.
基金supported in part by the National Natural Science Foundation of China [62102136]the 2020 Opening Fund for Hubei Key Laboratory of Intelligent Vision Based Monitoring for Hydroelectric Engineering [2020SDSJ06]the Construction Fund for Hubei Key Laboratory of Intelligent Vision Based Monitoring for Hydroelectric Engineering [2019ZYYD007].
文摘Generation-based linguistic steganography is a popular research area of information hiding.The text generative steganographic method based on conditional probability coding is the direction that researchers have recently paid attention to.However,in the course of our experiment,we found that the secret information hiding in the text tends to destroy the statistical distribution characteristics of the original text,which indicates that this method has the problem of the obvious reduction of text quality when the embedding rate increases,and that the topic of generated texts is uncontrollable,so there is still room for improvement in concealment.In this paper,we propose a topic-controlled steganography method which is guided by graph-to-text generation.The proposed model can automatically generate steganographic texts carrying secret messages from knowledge graphs,and the topic of the generated texts is controllable.We also provide a graph path coding method with corresponding detailed algorithms for graph-to-text generation.Different from traditional linguistic steganography methods,we encode the secret information during graph path coding rather than using conditional probability.We test our method in different aspects and compare it with other text generative steganographic methods.The experimental results show that the model proposed in this paper can effectively improve the quality of the generated text and significantly improve the concealment of steganographic text.
基金supported in part by the Major Scientific and Technological Projects of CNPC under Grant ZD2019-183-006.
文摘Link prediction,also known as Knowledge Graph Completion(KGC),is the common task in Knowledge Graphs(KGs)to predict missing connections between entities.Most existing methods focus on designing shallow,scalable models,which have less expressive than deep,multi-layer models.Furthermore,most operations like addition,matrix multiplications or factorization are handcrafted based on a few known relation patterns in several wellknown datasets,such as FB15k,WN18,etc.However,due to the diversity and complex nature of real-world data distribution,it is inherently difficult to preset all latent patterns.To address this issue,we proposeKGE-ANS,a novel knowledge graph embedding framework for general link prediction tasks using automatic network search.KGEANS can learn a deep,multi-layer effective architecture to adapt to different datasets through neural architecture search.In addition,the general search spacewe designed is tailored forKGtasks.We performextensive experiments on benchmark datasets and the dataset constructed in this paper.The results show that our KGE-ANS outperforms several state-of-the-art methods,especially on these datasets with complex relation patterns.
基金Supported by the National Natural Science Foundation of China(No.82174276 and 82074580)the Key Research and Development Program of Jiangsu Province(No.BE2022712)+2 种基金China Postdoctoral Foundation(No.2021M701674)Postdoctoral Research Program of Jiangsu Province(No.2021K457C)Qinglan Project of Jiangsu Universities 2021。
文摘Chinese medicine(CM)diagnosis intellectualization is one of the hotspots in the research of CM modernization.The traditional CM intelligent diagnosis models transform the CM diagnosis issues into classification issues,however,it is difficult to solve the problems such as excessive or similar categories.With the development of natural language processing techniques,text generation technique has become increasingly mature.In this study,we aimed to establish the CM diagnosis generation model by transforming the CM diagnosis issues into text generation issues.The semantic context characteristic learning capacity was enhanced referring to Bidirectional Long Short-Term Memory(BILSTM)with Transformer as the backbone network.Meanwhile,the CM diagnosis generation model Knowledge Graph Enhanced Transformer(KGET)was established by introducing the knowledge in medical field to enhance the inferential capability.The KGET model was established based on 566 CM case texts,and was compared with the classic text generation models including Long Short-Term Memory sequence-to-sequence(LSTM-seq2seq),Bidirectional and Auto-Regression Transformer(BART),and Chinese Pre-trained Unbalanced Transformer(CPT),so as to analyze the model manifestations.Finally,the ablation experiments were performed to explore the influence of the optimized part on the KGET model.The results of Bilingual Evaluation Understudy(BLEU),Recall-Oriented Understudy for Gisting Evaluation 1(ROUGE1),ROUGE2 and Edit distance of KGET model were 45.85,73.93,54.59 and 7.12,respectively in this study.Compared with LSTM-seq2seq,BART and CPT models,the KGET model was higher in BLEU,ROUGE1 and ROUGE2 by 6.00–17.09,1.65–9.39 and 0.51–17.62,respectively,and lower in Edit distance by 0.47–3.21.The ablation experiment results revealed that introduction of BILSTM model and prior knowledge could significantly increase the model performance.Additionally,the manual assessment indicated that the CM diagnosis results of the KGET model used in this study were highly consistent with the practical diagnosis results.In conclusion,text generation technology can be effectively applied to CM diagnostic modeling.It can effectively avoid the problem of poor diagnostic performance caused by excessive and similar categories in traditional CM diagnostic classification models.CM diagnostic text generation technology has broad application prospects in the future.
文摘Essentially, it is significant to supply the consumer with reliable and sufficient power. Since, power quality is measured by the consistency in frequency and power flow between control areas. Thus, in a power system operation and control,automatic generation control(AGC) plays a crucial role. In this paper, multi-area(Five areas: area 1, area 2, area 3, area 4 and area 5) reheat thermal power systems are considered with proportional-integral-derivative(PID) controller as a supplementary controller. Each area in the investigated power system is equipped with appropriate governor unit, turbine with reheater unit, generator and speed regulator unit. The PID controller parameters are optimized by considering nature bio-inspired firefly algorithm(FFA). The experimental results demonstrated the comparison of the proposed system performance(FFA-PID)with optimized PID controller based genetic algorithm(GAPID) and particle swarm optimization(PSO) technique(PSOPID) for the same investigated power system. The results proved the efficiency of employing the integral time absolute error(ITAE) cost function with one percent step load perturbation(1 % SLP) in area 1. The proposed system based FFA achieved the least settling time compared to using the GA or the PSO algorithms, while, it attained good results with respect to the peak overshoot/undershoot. In addition, the FFA performance is improved with the increased number of iterations which outperformed the other optimization algorithms based controller.
基金supported by National Natural Science Foundation of China(61100159,61233007,61503371)National High Technology Research and Development Program of China(863 Program)(2011AA040103)+2 种基金Foundation of Chinese Academy of Sciences(KGCX2-EW-104)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA06021100)the Cross-disciplinary Collaborative Teams Program for Science,Technology,and Innovation of Chinese Academy of Sciences-Network and System Technologies for Security Monitoring and Information Interaction in Smart Grid,Energy Management System for Micro-smart Grid
文摘The microgrid is a typical cyber-physical microgrid system(CPMS). The physical unconventional distributed generators(DGs) are intermittent and inverter-interfaced which makes them very different to control. The cyber components,such as the embedded computer and communication network,are equipped with DGs, to process and transmit the necessary information for the controllers. In order to ensure system-wide observability, controllability and stabilization for the microgrid,the cyber and physical component need to be integrated. For the physical component of CPMS, the droop-control method is popular as it can be applied in both modes of operation to improve the grid transient performance. Traditional droop control methods have the drawback of the inherent trade-off between power sharing and voltage and frequency regulation. In this paper, the global information(such as the average voltage and the output active power of the microgrid and so on) are acquired distributedly based on multi-agent system(MAS). Based on the global information from cyber components of CPMS, automatic generation control(AGC) and automatic voltage control(AVC)are proposed to deal with the drawback of traditional droop control. Simulation studies in PSCAD demonstrate the effectiveness of the proposed control methods.
文摘Present day power scenarios demand a high quality uninterrupted power supply and needs environmental issues to be addressed. Both concerns can be dealt with by the introduction of the renewable sources to the existing power system. Thus, automatic generation control(AGC) with diverse renewable sources and a modified-cascaded controller are presented in the paper.Also, a new hybrid scheme of the improved teaching learning based optimization-differential evolution(hITLBO-DE) algorithm is applied for providing optimization of controller parameters. A study of the system with a technique such as TLBO applied to a proportional integral derivative(PID), integral double derivative(IDD) and PIDD is compared to hITLBO-DE tuned cascaded controller with dynamic load change.The suggested methodology has been extensively applied to a 2-area system with a diverse source power system with various operation time non-linearities such as dead-band of, generation rate constraint and reheat thermal units. The multi-area system with reheat thermal plants, hydel plants and a unit of a wind-diesel combination is tested with the cascaded controller scheme with a different controller setting for each area. The variation of the load is taken within 1% to 5% of the connected load and robustness analysis is shown by modifying essential factors simultaneously by± 30%. Finally, the proposed scheme of controller and optimization technique is also tested with a 5-equal area thermal system with non-linearities. The simulation results demonstrate the superiority of the proposed controller and algorithm under a dynamically changing load.
