Magnetic holes are magnetic depression structures that exist widely in many plasma environments.The magnetic holes with durations of>1 s in the solar wind at Mercury’s orbit have drawn much attention,but the prope...Magnetic holes are magnetic depression structures that exist widely in many plasma environments.The magnetic holes with durations of>1 s in the solar wind at Mercury’s orbit have drawn much attention,but the properties of the magnetic holes with shorter durations are still unclear.Here,we investigate the magnetic holes with durations of 0.1-100 s in the upstream region of Mercury’s bow shock based on observations by the MESSENGER(MErcury Surface,Space ENvironment,GEochemistry,and Ranging)spacecraft.They can be divided into two groups according to the distribution of their duration:small-duration magnetic holes(SDMHs,<0.6 s)and large-duration magnetic holes(LDMHs,>0.6 s).The duration of each group approximately obeys a log-normal distribution with a median of~0.25 s and 3 s,respectively.Approximately 1.7%(32.6%)of the SDMHs(LDMHs)reduce the magnetic field strength by more than 50%.For both groups,some structures have a linear or quasi-linear polarization,whereas others have an elliptical polarization.The magnetic hole events in both groups tend to have a higher rate of occurrence when the interplanetary magnetic field strength is weaker.Their occurrence rates are also affected by Mercury’s foreshock,which can increase(decrease)the occurrence rate of the SDMHs(LDMHs).This finding suggests that Mercury’s foreshock might be one source of the SDMHs and that the foreshock can destroy some LDMHs.These observations suggest that a new group of magnetic holes with durations of<0.6 s exist in the upstream region of Mercury’s bow shock.展开更多
The Newton’s theory of universal gravitation is generalized. Significantly strong at short distances central interaction of bodies and particles is established in comparison with Newtonian. A connection is found with...The Newton’s theory of universal gravitation is generalized. Significantly strong at short distances central interaction of bodies and particles is established in comparison with Newtonian. A connection is found with Black Holes, with the horizon of events. Possibility of systematization of all Black Holes is shown. An illustration is given on the example of Black Hole S<sub>gr</sub>A*.展开更多
Co-Ni-based superalloys are known for their capability to function at elevated temperatures and superior hot corrosion and thermal fatigue resistance.Therefore,these alloys show potential as crucial high-temperature s...Co-Ni-based superalloys are known for their capability to function at elevated temperatures and superior hot corrosion and thermal fatigue resistance.Therefore,these alloys show potential as crucial high-temperature structural materials for aeroengine and gas turbine hot-end components.Our previous work elucidated the influence of Ti and Ta on the high-temperature mechanical properties of alloys.However,the intricate interaction among elements considerably affects the oxidation resistance of alloys.In this paper,Co-35Ni-10Al-2W-5Cr-2Mo-1Nb-xTi-(5−x)Ta alloys(x=1,2,3,4)with varying Ti and Ta contents were designed and compounded,and their oxidation resistance was investigated at the temperature range from 800 to 1000℃.After oxidation at three test conditions,namely,800℃for 200 h,900℃for 200 h,and 1000℃for 50 h,the main structure of the oxide layer of the alloy consisted of spinel,Cr_(2)O_(3),and Al_(2)O_(3)from outside to inside.Oxides consisting of Ta,W,and Mo formed below the Cr_(2)O_(3)layer.The interaction of Ti and Ta imparted the highest oxidation resistance to 3Ti2Ta alloy.Conversely,an excessive amount of Ti or Ta resulted in an adverse effect on the oxidation resistance of the alloys.This study reports the volatilization of W and Mo oxides during the oxidation process of Co-Ni-based cast superalloys with a high Al content for the first time and explains the formation mechanism of holes in the oxide layer.The results provide a basis for gaining insights into the effects of the interaction of alloying elements on the oxidation resistance of the alloys they form.展开更多
Black holes contradict the Nernst-Planck (N/P) version of the 3rd law of thermodynamics, but agree with its unattainability (U) version. This happens without contradiction, because the N/P and U versions are not equiv...Black holes contradict the Nernst-Planck (N/P) version of the 3rd law of thermodynamics, but agree with its unattainability (U) version. This happens without contradiction, because the N/P and U versions are not equivalent, namely, N/P implies U but U does not imply N/P. So, black holes obey the weaker version of the 3rd law, but not the stronger one.展开更多
Vera Rubin measured the rotational speeds of galaxies, Ref. [1] 1983, and she found that the masses of galaxies were not enough to produce the measured speeds of rotation. Therefore, it was inferred that there must be...Vera Rubin measured the rotational speeds of galaxies, Ref. [1] 1983, and she found that the masses of galaxies were not enough to produce the measured speeds of rotation. Therefore, it was inferred that there must be an unknown matter which is many times the known visible and dark matter. In this study, the solution to the dark matter mystery of spiral galaxies is a four-dimensional mass in the space of four distance dimensions, coordinates: x,y,z,x', in which x' is the fourth distance dimension. The four-dimensional mass is a black hole, and it generates the main gravitation field of the galaxy. This mysterious black hole is located in the fourth dimension at the distance x' = X'. The rotational speed distribution curves of the galaxy NGC 3198 have been presented in Ref. [2]. The speed distribution curve of the galactic halo in that publication corresponds to the speed distribution curve of the four-dimensional black hole in this study. In order to find out how well this four-dimensional model functions, the speed distribution curve of the four-dimensional black hole was calculated, and it was compared with the halo curve of Ref. [2]. The conclusion was that the calculated speed distribution curve of the black hole was a good match to the halo curve of Ref. [2]. Furthermore, the rotational speed distribution curves of the four-dimensional black hole were calculated by using different values of the reduced distance X', which yielded at the distance X' = 0 a black hole of radius R = 7.7 × 10<sup>17</sup> m. By using the relativistic Lorentz transformation, it was shown in this study that a star falling into the four-dimensional black hole remains rotating it at near speed of light, and cannot fall into the actual black hole.展开更多
●AIM:To introduce the macular hole(MH)hydromassage technique as a potentially beneficial approach for the treatment of large or persistent MH.●METHODS:This retrospective observational case series comprised 16 consec...●AIM:To introduce the macular hole(MH)hydromassage technique as a potentially beneficial approach for the treatment of large or persistent MH.●METHODS:This retrospective observational case series comprised 16 consecutive patients(17 eyes)diagnosed with MH.Inclusion criteria involved a hole aperture diameter larger than 600μm or the presence of an unclosed MH larger than 600μm following the previous vitrectomy.Standard MH repair procedures were administered in all cases,involving the manipulation and aspiration of the hole margin through the application of water flow with a soft-tip flute needle.A comprehensive assessment was conducted for each case before and after surgery,and optical coherence tomography(OCT)images were captured at every follow-up point.●RESULTS:The mean preoperative aperture diameter was 747±156μm(range 611-1180μm),with a mean base diameter of 1390±435μm(range 578-2220μm).Following surgery,all cases achieved complete anatomical closure of MH,with 13 cases(76.5%)exhibiting type 1 closure and 4 cases(23.5%)demonstrating type 2 closure.No significant differences were observed in the preoperative OCT variables between the two closure types.Eyes with type 1 closure showed a significantly improved visual acuity(0.70±0.10,range 0.50-0.80)compared to those with type 2 closure(0.90±0.12,range 0.80-1.00,P=0.014).●CONCLUSION:The MH hydromassage technique demonstrates promising results,achieving acceptable closure rates in cases of large or persistent MH.This technique may serve as an effective adjunctive maneuver during challenging MH surgery.展开更多
We examine thermodynamic phase transition(PT)of the charged Gauss-Bonnet Ad S black hole(BH)by utilizing the shadow radius.In this system,we rescale the corresponding Gauss-Bonnet coefficientαby a factor of 1/(D-4),a...We examine thermodynamic phase transition(PT)of the charged Gauss-Bonnet Ad S black hole(BH)by utilizing the shadow radius.In this system,we rescale the corresponding Gauss-Bonnet coefficientαby a factor of 1/(D-4),and ensure thatαis positive to avoid any singularity problems.The equation derived for the shadow radius indicates that it increases as the event horizon radius increases,making it an independent variable for determining BH temperature.By investigating the PT curve in relation to shadows,we can observe that the shadow radius can be used as an alternative to the event horizon radius in explaining the phenomenon of BH PT.Furthermore,the results indicate that an increase in the parameterαcorresponds to a decrease in the temperature of the BH.By utilizing the relationship between the temperature and the shadow radius,it is possible to obtain the thermal profile of the Gauss-Bonnet AdS BH.It is evident that there is an N-type variation in temperature for pressures P<P_(c).Additionally,as the parameterαincreases,the region covered by shadow expands while the temperature decreases.The utilization of BH shadows as a probe holds immense significance in gaining a deeper understanding of BH thermodynamic behavior.展开更多
By considering the negative cosmological constant Λ as a thermodynamic pressure, we study the thermodynamics and phase transitions of the D-dimensional dyonic Ad S black holes(BHs) with quasitopological electromagnet...By considering the negative cosmological constant Λ as a thermodynamic pressure, we study the thermodynamics and phase transitions of the D-dimensional dyonic Ad S black holes(BHs) with quasitopological electromagnetism in Einstein–Gauss–Bonnet(EGB) gravity. The results indicate that the small/large BH phase transition that is similar to the van der Waals(vdW) liquid/gas phase transition always exists for any spacetime dimensions. Interestingly, we then find that this BH system exhibits a more complex phase structure in 6-dimensional case that is missed in other dimensions.Specifically, it shows for D = 6 that we observed the small/intermediate/large BH phase transitions in a specific parameter region with the triple point naturally appeared. Moreover, when the magnetic charge turned off, we still observed the small/intermediate/large BH phase transitions and triple point only in 6-dimensional spacetime, which is consistent with the previous results. However, for the dyonic Ad S BHs with quasitopological electromagnetism in Einstein–Born–Infeld(EBI) gravity, the novel phase structure composed of two separate coexistence curves observed by Li et al. [Phys. Rev. D105 104048(2022)] disappeared in EGB gravity. This implies that this novel phase structure is closely related to gravity theories, and seems to have nothing to do with the effect of quasitopological electromagnetism. In addition, it is also true that the critical exponents calculated near the critical points possess identical values as mean field theory. Finally, we conclude that these findings shall provide some deep insights into the intriguing thermodynamic properties of the dyonic Ad S BHs with quasitopological electromagnetism in EGB gravity.展开更多
This article describes an extension of the theory of vortices to electromagnetic types with a start point from known fluid systems. From this, properties of gravity-generating objects (particles and black holes) can b...This article describes an extension of the theory of vortices to electromagnetic types with a start point from known fluid systems. From this, properties of gravity-generating objects (particles and black holes) can be derived, which can also describe their possible interior. This also leads to questions about stability, which are then addressed and ultimately lead to considerations of black holes and their possible internal structure. The results fit into the observable areas and can also be directly verified because they were analytically calculated in SI units.展开更多
The backreaming operation plays a significant role in safe drilling for horizontal wellbores, while it may cause severe stuck pipe accidents. To lower the risk of the stuck pipe in backreaming operations, the mechanis...The backreaming operation plays a significant role in safe drilling for horizontal wellbores, while it may cause severe stuck pipe accidents. To lower the risk of the stuck pipe in backreaming operations, the mechanism of cuttings transport needs to be carefully investigated. In this research, a transient cuttings transport with multiple flow patterns model is developed to predict the evolution of cuttings transported in the annulus while backreaming. The established model can provide predictions of the distribution of cuttings bed along the wellbore considering the bulldozer effect caused by large-size drilling tools(LSDTs). The sensitivity analyses of the size of LSDTs, and backreaming operating parameters are conducted in Section 4. And a new theory is proposed to explain the mechanism of cuttings transport in the backreaming operation, in which both the bit and LSDTs have the “cleaning effect” and “plugging effect”.The results demonstrate that the cuttings bed in annuli is in a state of dynamic equilibrium, but the overall trend and the distribution pattern are obvious. First, larger diameters and longer drilling tools could lead to a higher risk of the stuck pipe. Second, we find that it is not the case that the higher flow rate is always better for hole cleaning, so three flow-rate intervals are discussed separately under the given conditions. When the “dangerous flow rate”(<33 L/s in Case 4) is employed, the cuttings bed completely blocks the borehole near the step surface and causes a stuck pipe directly. If the flow rate increases to the “low flow rate” interval(33-35 L/s in Case 4), a smaller flow rate instead facilitates borehole cleaning. If the flow rate is large enough to be in the “high flow rate” interval(>35 L/s in Case 4),the higher the flow rate, the better the cleaning effect of cuttings beds. Third, an interval of tripping velocity called “dangerous velocity” is proposed, in which the cuttings bed accumulation near the LSDTs is more serious than those of other tripping velocities. As long as the applied tripping velocity is not within the “dangerous velocity”(0.4-0.5 m/s in Case 5) interval in the backreaming operation, the risk of the stuck pipe can be controlled validly. Finally, through the factors analyses of the annular geometry,particle properties, and fluid properties in Section 5, it can be found that the “low flow rate”, “high flow rate” and “dangers flow rate” tend to decrease and the “dangerous velocity” tends to increase with the conditions more favorable for hole cleaning. This study has some guiding significance for risk prediction and parameter setting of the backreaming operation.展开更多
We calculate the thermodynamic quantities in the quantum corrected Reissner-Nordstr?m-AdS(RN-AdS)black hole,and examine their quantum corrections.By analyzing the mass and heat capacity,we give the critical state and ...We calculate the thermodynamic quantities in the quantum corrected Reissner-Nordstr?m-AdS(RN-AdS)black hole,and examine their quantum corrections.By analyzing the mass and heat capacity,we give the critical state and the remnant state,respectively,and discuss their consistency.Then,we investigate the quantum tunneling from the event horizon of massless scalar particle by using the null geodesic method,and charged massive boson W^(±)and fermions by using the Hamilton-Jacob method.It is shown that the same Hawking temperature can be obtained from these tunneling processes of different particles and methods.Next,by using the generalized uncertainty principle(GUP),we study the quantum corrections to the tunneling and the temperature.Then the logarithmic correction to the black hole entropy is obtained.展开更多
We present a comprehensive analysis of the 2021 outburst of MAXI J1803–298 utilizing observations of the Insight-Hard X-ray Modulation Telescope(Insight-HXMT)spanning from the low hard state to the high soft state.Wi...We present a comprehensive analysis of the 2021 outburst of MAXI J1803–298 utilizing observations of the Insight-Hard X-ray Modulation Telescope(Insight-HXMT)spanning from the low hard state to the high soft state.Within the Insight-HXMT data set,compared to the previous work,we identify a more prolonged presence of typeC quasi-periodic oscillations(QPOs)with centroid frequencies ranging from~0.16 to 6.3 Hz,which present correlations with the hardness ratio and the photon index of the Comptonized component.For QPO frequencies less than~2 Hz,the QPO phase lags are hard(photons of 10–19 keV arrive later than those of 1–4 keV),while at higher frequencies,the lags become soft at and above~4 Hz.Furthermore,the spectra in all Insight-HXMT observations consist of a multi-color blackbody component and a Comptonized component,as commonly observed in classical black hole X-ray binaries.We analyze state transitions and the evolution of accretion geometry in this work.The fitted inner disk radius increases abnormally during the low hard state,hypothesized to result from the corona condensing onto the inner disk.Additionally,two significant drops in flux are observed during the soft intermediate state,maybe implying changes in the corona/jet and the disk,respectively.展开更多
Here we present the foundations of the Scale-Symmetric Theory (SST), i.e. the fundamental phase transitions of the initial inflation field, the atom-like structure of baryons and different types of black holes. Within...Here we present the foundations of the Scale-Symmetric Theory (SST), i.e. the fundamental phase transitions of the initial inflation field, the atom-like structure of baryons and different types of black holes. Within SST we show that the transition from the nuclear strong interactions in the off-shell Higgs boson production to the nuclear weak interactions causes that the real total width of the Higgs boson from the Higgs line shape (i.e. 3.3 GeV) decreases to 4.3 MeV that is the illusory total width. Moreover, there appear some glueballs/condensates with the energy 3.3 GeV that accompany the production of the off-shell Higgs bosons.展开更多
The equilibrium configuration of a solid strange star in the final inspiral phase with another compact object is generally discussed,and the starquake-related issue is revisited,for a special purpose to understand the...The equilibrium configuration of a solid strange star in the final inspiral phase with another compact object is generally discussed,and the starquake-related issue is revisited,for a special purpose to understand the precursor emission of binary compact star merger events(e.g.,that of GRB211211A).As the binary system inspirals inward due to gravitational wave radiation,the ellipticity of the solid strangeon star increases due to the growing tidal field of its compact companion.Elastic energy is hence accumulated during the inspiral stage which might trigger a starquake before the merger when the energy exceeds a critical value.The energy released during such starquakes is calculated and compared to the precursor observation of GRB211211 A.The result shows that the energy might be insufficient for binary strangeon-star case unless the entire solid strangeon star shatters,and hence favors a black hole-strangeon star scenario for GRB211211A.The timescale of the precursor as well as the frequency of the observed quasi-periodic-oscillation have also been discussed in the starquake model.展开更多
With the growth of deep drilling and the complexity of the well profile,the requirements for a more complete and efficient exploitation of productive formations increase,which increases the risk of various complicatio...With the growth of deep drilling and the complexity of the well profile,the requirements for a more complete and efficient exploitation of productive formations increase,which increases the risk of various complications.Currently,reagents based on modified natural polymers(which are naturally occurring compounds)and synthetic polymers(SPs)which are polymeric compounds created industrially,are widely used to prevent emerging complications in the drilling process.However,compared to modified natural polymers,SPs form a family of high-molecular-weight compounds that are fully synthesized by undergoing chemical polymerization reactions.SPs provide substantial flexibility in their design.Moreover,their size and chemical composition can be adjusted to provide properties for nearly all the functional objectives of drilling fluids.They can be classified based on chemical ingredients,type of reaction,and their responses to heating.However,some of SPs,due to their structural characteristics,have a high cost,a poor temperature and salt resistance in drilling fluids,and degradation begins when the temperature reaches 130℃.These drawbacks prevent SP use in some medium and deep wells.Thus,this review addresses the historical development,the characteristics,manufacturing methods,classification,and the applications of SPs in drilling fluids.The contributions of SPs as additives to drilling fluids to enhance rheology,filtrate generation,carrying of cuttings,fluid lubricity,and clay/shale stability are explained in detail.The mechanisms,impacts,and advances achieved when SPs are added to drilling fluids are also described.The typical challenges encountered by SPs when deployed in drilling fluids and their advantages and drawbacks are also discussed.Economic issues also impact the applications of SPs in drilling fluids.Consequently,the cost of the most relevant SPs,and the monomers used in their synthesis,are assessed.Environmental impacts of SPs when deployed in drilling fluids,and their manufacturing processes are identified,together with advances in SP-treatment methods aimed at reducing those impacts.Recommendations for required future research addressing SP property and performance gaps are provided.展开更多
Wireless technology is transforming the future of transportation through the development of the Internet of Vehicles(IoV).However,intricate security challenges are intertwinedwith technological progress:Vehicular ad h...Wireless technology is transforming the future of transportation through the development of the Internet of Vehicles(IoV).However,intricate security challenges are intertwinedwith technological progress:Vehicular ad hoc Networks(VANETs),a core component of IoV,face security issues,particularly the Black Hole Attack(BHA).This malicious attack disrupts the seamless flow of data and threatens the network’s overall reliability;also,BHA strategically disrupts communication pathways by dropping data packets from legitimate nodes altogether.Recognizing the importance of this challenge,we have introduced a new solution called ad hoc On-Demand Distance Vector-Reputation-based mechanism Local Outlier Factor(AODV-RL).The significance of AODVRL lies in its unique approach:it verifies and confirms the trustworthiness of network components,providing robust protection against BHA.An additional safety layer is established by implementing the Local Outlier Factor(LOF),which detects and addresses abnormal network behaviors.Rigorous testing of our solution has revealed its remarkable ability to enhance communication in VANETs.Specifically,Our experimental results achieve message delivery ratios of up to 94.25%andminimal packet loss ratios of just 0.297%.Based on our experimental results,the proposedmechanismsignificantly improves VANET communication reliability and security.These results promise a more secure and dependable future for IoV,capable of transforming transportation safety and efficiency.展开更多
Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress i...Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress interference,which results in uneven fracture propagation. It is common practice to use “balls” to temporarily plug fractureopenings in order to lessen liquid intake and achieve uniform propagation in each cluster. In this study, a diameteroptimization model is introduced for these plugging balls based on a multi-cluster fracture propagationmodel and a perforation dynamic abrasion model. This approach relies on proper consideration of the multiphasenature of the considered problem and the interaction force between the involved fluid and solid phases. Accordingly,it can take into account the behavior of the gradually changing hole diameter due to proppant continuousperforation erosion. Moreover, it can provide useful information about the fluid-dynamic behavior of the consideredsystem before and after plugging. It is shown that when the diameter of the temporary plugging ball is1.2 times that of the perforation hole, the perforation holes of each cluster can be effectively blocked.展开更多
In this work, we consider a conventional test of gravitational wave(GW) propagation which is based on the phenomenological parameterized dispersion relation to describe potential departures from General Relativity(GR)...In this work, we consider a conventional test of gravitational wave(GW) propagation which is based on the phenomenological parameterized dispersion relation to describe potential departures from General Relativity(GR)along the propagation of GWs. But different from tests conventionally performed previously, we vary multiple deformation coefficients simultaneously and employ the principal component analysis(PCA) method to remedy the strong degeneracy among deformation coefficients and obtain informative posteriors. The dominant PCA components can be better measured and constrained, and thus are expected to be more sensitive to potential departures from the waveform model. Using this method we analyze ten selected events and get the result that the combined posteriors of the dominant PCA parameters are consistent with GR within 99.7% credible intervals. The standard deviation of the first dominant PCA parameter is three times smaller than that of the original dispersion parameter of the leading order. However, the multi-parameter test with PCA is more sensitive to not only potential deviations from GR but also systematic errors of waveform models. The difference in results obtained by using different waveform templates hints that the demands of waveform accuracy are higher to perform the multiparameter test with PCA. Whereas, it cannot be strictly proven that the deviation is indeed and only induced by systematic errors. It requires more thorough research in the future to exclude other possible reasons in parameter estimation and data processing.展开更多
In the study of Terrestrial Gamma-ray Flashes (TGFs) and Sonoluminescence, we observe parallels with larger cosmic events. Specifically, sonoluminescence involves the rapid collapse of bubbles, which closely resembles...In the study of Terrestrial Gamma-ray Flashes (TGFs) and Sonoluminescence, we observe parallels with larger cosmic events. Specifically, sonoluminescence involves the rapid collapse of bubbles, which closely resembles gravitational collapse in space. This observation suggests the potential formation of low-density quantum black holes. These entities, which might be related to dark matter, are thought to experience a kind of transient evaporation similar to Hawking radiation seen in cosmic black holes. Consequently, sonoluminescence could be a valuable tool for investigating phenomena typically linked to cosmic scale events. Furthermore, the role of the Higgs boson is considered in this context, possibly connecting it to both TGFs and sonoluminescence. This research could enhance our understanding of the quantum mechanics of black holes and their relation to dark matter on Earth.展开更多
A photonic crystal nanobeam cavity(M-PCNC)with a structure incorporating a mixture of diamond-shaped and circular air holes is pro-posed.The performance of the cavity is simulated and studied theoretically.Using thefin...A photonic crystal nanobeam cavity(M-PCNC)with a structure incorporating a mixture of diamond-shaped and circular air holes is pro-posed.The performance of the cavity is simulated and studied theoretically.Using thefinite-difference time-domain method,the parameters of the M-PCNC,including cavity thickness and width,lattice constant,and radii and numbers of holes,are optimized,with the quality factor Q and mode volume Vm as performance indicators.Mutual modulation of the lattice constant and hole radius enable the proposed M-PCNC to realize outstanding performance.The optimized cavity possesses a high quality factor Q 1.45105 and an ultra-small mode=×volume Vm 0.01(λ/n)[Zeng et al.,Opt Lett 2023:48;3981–3984]in the telecommunications wavelength range.Light can be progres-=sively squeezed in both the propagation direction and the perpendicular in-plane direction by a series of interlocked anti-slots and slots in the diamond-shaped hole structure.Thereby,the energy can be confined within a small mode volume to achieve an ultra-high Q/Vm ratio.展开更多
基金the Fundamental Research Funds for the Central Universities(Grant No.HIT.OCEF.2022041)the National Natural Science Foundation of China(Grant Nos.42241155,41974205,42130204,and 42241133)+4 种基金the Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2022A1515011698,2023A1515030132,and 2022A1515010257)the Shenzhen Science and Technology Research Program(Grant Nos.JCYJ20210324121412034 and JCYJ20210324121403009)the Shenzhen Key Laboratory Launching Project(Grant No.ZDSYS20210702140800001)the Joint Open Fund of Mengcheng National Geophysical Observatory(Grant No.MENGO-202315)the Macao Foundation,the pre-research Project on Civil Aerospace Technologies(Grant No.D020103)funded by the China National Space Administration,and the Chinese Academy of Sciences Center for Excellence in Comparative Planetology。
文摘Magnetic holes are magnetic depression structures that exist widely in many plasma environments.The magnetic holes with durations of>1 s in the solar wind at Mercury’s orbit have drawn much attention,but the properties of the magnetic holes with shorter durations are still unclear.Here,we investigate the magnetic holes with durations of 0.1-100 s in the upstream region of Mercury’s bow shock based on observations by the MESSENGER(MErcury Surface,Space ENvironment,GEochemistry,and Ranging)spacecraft.They can be divided into two groups according to the distribution of their duration:small-duration magnetic holes(SDMHs,<0.6 s)and large-duration magnetic holes(LDMHs,>0.6 s).The duration of each group approximately obeys a log-normal distribution with a median of~0.25 s and 3 s,respectively.Approximately 1.7%(32.6%)of the SDMHs(LDMHs)reduce the magnetic field strength by more than 50%.For both groups,some structures have a linear or quasi-linear polarization,whereas others have an elliptical polarization.The magnetic hole events in both groups tend to have a higher rate of occurrence when the interplanetary magnetic field strength is weaker.Their occurrence rates are also affected by Mercury’s foreshock,which can increase(decrease)the occurrence rate of the SDMHs(LDMHs).This finding suggests that Mercury’s foreshock might be one source of the SDMHs and that the foreshock can destroy some LDMHs.These observations suggest that a new group of magnetic holes with durations of<0.6 s exist in the upstream region of Mercury’s bow shock.
文摘The Newton’s theory of universal gravitation is generalized. Significantly strong at short distances central interaction of bodies and particles is established in comparison with Newtonian. A connection is found with Black Holes, with the horizon of events. Possibility of systematization of all Black Holes is shown. An illustration is given on the example of Black Hole S<sub>gr</sub>A*.
基金the National Major Science and Technology Projects of China(Nos.J2019-VII-0010-0150 and J2019-VI-0009-0123)National Natural Science Foundation of China(Nos.52022011 and 52090041)+3 种基金Beijing Nova Program(No.Z211100002121170)Science Center for Gas Turbine Project(No.P2021-A-IV-001-002)Science and Technology on Advanced High Temperature Structural Materials Laboratory(No.6142903210306)Xiaomi Young Scholars Program.
文摘Co-Ni-based superalloys are known for their capability to function at elevated temperatures and superior hot corrosion and thermal fatigue resistance.Therefore,these alloys show potential as crucial high-temperature structural materials for aeroengine and gas turbine hot-end components.Our previous work elucidated the influence of Ti and Ta on the high-temperature mechanical properties of alloys.However,the intricate interaction among elements considerably affects the oxidation resistance of alloys.In this paper,Co-35Ni-10Al-2W-5Cr-2Mo-1Nb-xTi-(5−x)Ta alloys(x=1,2,3,4)with varying Ti and Ta contents were designed and compounded,and their oxidation resistance was investigated at the temperature range from 800 to 1000℃.After oxidation at three test conditions,namely,800℃for 200 h,900℃for 200 h,and 1000℃for 50 h,the main structure of the oxide layer of the alloy consisted of spinel,Cr_(2)O_(3),and Al_(2)O_(3)from outside to inside.Oxides consisting of Ta,W,and Mo formed below the Cr_(2)O_(3)layer.The interaction of Ti and Ta imparted the highest oxidation resistance to 3Ti2Ta alloy.Conversely,an excessive amount of Ti or Ta resulted in an adverse effect on the oxidation resistance of the alloys.This study reports the volatilization of W and Mo oxides during the oxidation process of Co-Ni-based cast superalloys with a high Al content for the first time and explains the formation mechanism of holes in the oxide layer.The results provide a basis for gaining insights into the effects of the interaction of alloying elements on the oxidation resistance of the alloys they form.
文摘Black holes contradict the Nernst-Planck (N/P) version of the 3rd law of thermodynamics, but agree with its unattainability (U) version. This happens without contradiction, because the N/P and U versions are not equivalent, namely, N/P implies U but U does not imply N/P. So, black holes obey the weaker version of the 3rd law, but not the stronger one.
文摘Vera Rubin measured the rotational speeds of galaxies, Ref. [1] 1983, and she found that the masses of galaxies were not enough to produce the measured speeds of rotation. Therefore, it was inferred that there must be an unknown matter which is many times the known visible and dark matter. In this study, the solution to the dark matter mystery of spiral galaxies is a four-dimensional mass in the space of four distance dimensions, coordinates: x,y,z,x', in which x' is the fourth distance dimension. The four-dimensional mass is a black hole, and it generates the main gravitation field of the galaxy. This mysterious black hole is located in the fourth dimension at the distance x' = X'. The rotational speed distribution curves of the galaxy NGC 3198 have been presented in Ref. [2]. The speed distribution curve of the galactic halo in that publication corresponds to the speed distribution curve of the four-dimensional black hole in this study. In order to find out how well this four-dimensional model functions, the speed distribution curve of the four-dimensional black hole was calculated, and it was compared with the halo curve of Ref. [2]. The conclusion was that the calculated speed distribution curve of the black hole was a good match to the halo curve of Ref. [2]. Furthermore, the rotational speed distribution curves of the four-dimensional black hole were calculated by using different values of the reduced distance X', which yielded at the distance X' = 0 a black hole of radius R = 7.7 × 10<sup>17</sup> m. By using the relativistic Lorentz transformation, it was shown in this study that a star falling into the four-dimensional black hole remains rotating it at near speed of light, and cannot fall into the actual black hole.
基金Supported by National Natural Science Foundation of China(NSFC)fund(No.81970815).
文摘●AIM:To introduce the macular hole(MH)hydromassage technique as a potentially beneficial approach for the treatment of large or persistent MH.●METHODS:This retrospective observational case series comprised 16 consecutive patients(17 eyes)diagnosed with MH.Inclusion criteria involved a hole aperture diameter larger than 600μm or the presence of an unclosed MH larger than 600μm following the previous vitrectomy.Standard MH repair procedures were administered in all cases,involving the manipulation and aspiration of the hole margin through the application of water flow with a soft-tip flute needle.A comprehensive assessment was conducted for each case before and after surgery,and optical coherence tomography(OCT)images were captured at every follow-up point.●RESULTS:The mean preoperative aperture diameter was 747±156μm(range 611-1180μm),with a mean base diameter of 1390±435μm(range 578-2220μm).Following surgery,all cases achieved complete anatomical closure of MH,with 13 cases(76.5%)exhibiting type 1 closure and 4 cases(23.5%)demonstrating type 2 closure.No significant differences were observed in the preoperative OCT variables between the two closure types.Eyes with type 1 closure showed a significantly improved visual acuity(0.70±0.10,range 0.50-0.80)compared to those with type 2 closure(0.90±0.12,range 0.80-1.00,P=0.014).●CONCLUSION:The MH hydromassage technique demonstrates promising results,achieving acceptable closure rates in cases of large or persistent MH.This technique may serve as an effective adjunctive maneuver during challenging MH surgery.
基金Project supported by the National Natural Science Foundation of China (Grant No.11903025)the starting fund of China West Normal University (Grant No.18Q062)+2 种基金the Sichuan Youth Science and Technology Innovation Research Team (Grant No.21CXTD0038)the Chongqing Science and Technology Bureau (Grant No.cstc2022ycjh-bgzxm0161)the Natural Science Foundation of Sichuan Province (Grant No.2022NSFSC1833)。
文摘We examine thermodynamic phase transition(PT)of the charged Gauss-Bonnet Ad S black hole(BH)by utilizing the shadow radius.In this system,we rescale the corresponding Gauss-Bonnet coefficientαby a factor of 1/(D-4),and ensure thatαis positive to avoid any singularity problems.The equation derived for the shadow radius indicates that it increases as the event horizon radius increases,making it an independent variable for determining BH temperature.By investigating the PT curve in relation to shadows,we can observe that the shadow radius can be used as an alternative to the event horizon radius in explaining the phenomenon of BH PT.Furthermore,the results indicate that an increase in the parameterαcorresponds to a decrease in the temperature of the BH.By utilizing the relationship between the temperature and the shadow radius,it is possible to obtain the thermal profile of the Gauss-Bonnet AdS BH.It is evident that there is an N-type variation in temperature for pressures P<P_(c).Additionally,as the parameterαincreases,the region covered by shadow expands while the temperature decreases.The utilization of BH shadows as a probe holds immense significance in gaining a deeper understanding of BH thermodynamic behavior.
基金supported by the National Natural Science Foundation of China (Grant No. 11903025)the Starting Fund of China West Normal University (Grant No. 18Q062)+2 种基金the Sichuan Science and Technology Program (Grant No. 2023ZYD0023)the Sichuan Youth Science and Technology Innovation Research Team (Grant No. 21CXTD0038)the Natural Science Foundation of Sichuan Province (Grant No. 2022NSFSC1833)。
文摘By considering the negative cosmological constant Λ as a thermodynamic pressure, we study the thermodynamics and phase transitions of the D-dimensional dyonic Ad S black holes(BHs) with quasitopological electromagnetism in Einstein–Gauss–Bonnet(EGB) gravity. The results indicate that the small/large BH phase transition that is similar to the van der Waals(vdW) liquid/gas phase transition always exists for any spacetime dimensions. Interestingly, we then find that this BH system exhibits a more complex phase structure in 6-dimensional case that is missed in other dimensions.Specifically, it shows for D = 6 that we observed the small/intermediate/large BH phase transitions in a specific parameter region with the triple point naturally appeared. Moreover, when the magnetic charge turned off, we still observed the small/intermediate/large BH phase transitions and triple point only in 6-dimensional spacetime, which is consistent with the previous results. However, for the dyonic Ad S BHs with quasitopological electromagnetism in Einstein–Born–Infeld(EBI) gravity, the novel phase structure composed of two separate coexistence curves observed by Li et al. [Phys. Rev. D105 104048(2022)] disappeared in EGB gravity. This implies that this novel phase structure is closely related to gravity theories, and seems to have nothing to do with the effect of quasitopological electromagnetism. In addition, it is also true that the critical exponents calculated near the critical points possess identical values as mean field theory. Finally, we conclude that these findings shall provide some deep insights into the intriguing thermodynamic properties of the dyonic Ad S BHs with quasitopological electromagnetism in EGB gravity.
文摘This article describes an extension of the theory of vortices to electromagnetic types with a start point from known fluid systems. From this, properties of gravity-generating objects (particles and black holes) can be derived, which can also describe their possible interior. This also leads to questions about stability, which are then addressed and ultimately lead to considerations of black holes and their possible internal structure. The results fit into the observable areas and can also be directly verified because they were analytically calculated in SI units.
基金the National Natural Science Foundation of China,China(Grant No.52227804,52174010)Strategic Cooperation Technology Projects of CNPC and CUPB,China(Grant No.ZLZX2020-01)+1 种基金Sinopec key laboratory of drilling completion and fracturing of shale oil and gas,China(Grant No.35800000-22-ZC0699-0004)the Key Projects of Scientific Research Plan in Colleges and Universities of Xinjiang Uygur Autonomous Region,China(Grant No.XJEDU20211028)。
文摘The backreaming operation plays a significant role in safe drilling for horizontal wellbores, while it may cause severe stuck pipe accidents. To lower the risk of the stuck pipe in backreaming operations, the mechanism of cuttings transport needs to be carefully investigated. In this research, a transient cuttings transport with multiple flow patterns model is developed to predict the evolution of cuttings transported in the annulus while backreaming. The established model can provide predictions of the distribution of cuttings bed along the wellbore considering the bulldozer effect caused by large-size drilling tools(LSDTs). The sensitivity analyses of the size of LSDTs, and backreaming operating parameters are conducted in Section 4. And a new theory is proposed to explain the mechanism of cuttings transport in the backreaming operation, in which both the bit and LSDTs have the “cleaning effect” and “plugging effect”.The results demonstrate that the cuttings bed in annuli is in a state of dynamic equilibrium, but the overall trend and the distribution pattern are obvious. First, larger diameters and longer drilling tools could lead to a higher risk of the stuck pipe. Second, we find that it is not the case that the higher flow rate is always better for hole cleaning, so three flow-rate intervals are discussed separately under the given conditions. When the “dangerous flow rate”(<33 L/s in Case 4) is employed, the cuttings bed completely blocks the borehole near the step surface and causes a stuck pipe directly. If the flow rate increases to the “low flow rate” interval(33-35 L/s in Case 4), a smaller flow rate instead facilitates borehole cleaning. If the flow rate is large enough to be in the “high flow rate” interval(>35 L/s in Case 4),the higher the flow rate, the better the cleaning effect of cuttings beds. Third, an interval of tripping velocity called “dangerous velocity” is proposed, in which the cuttings bed accumulation near the LSDTs is more serious than those of other tripping velocities. As long as the applied tripping velocity is not within the “dangerous velocity”(0.4-0.5 m/s in Case 5) interval in the backreaming operation, the risk of the stuck pipe can be controlled validly. Finally, through the factors analyses of the annular geometry,particle properties, and fluid properties in Section 5, it can be found that the “low flow rate”, “high flow rate” and “dangers flow rate” tend to decrease and the “dangerous velocity” tends to increase with the conditions more favorable for hole cleaning. This study has some guiding significance for risk prediction and parameter setting of the backreaming operation.
基金Project supported by the Natural Science Foundation of Zhejiang Province,China (Grant No.LY14A030001)。
文摘We calculate the thermodynamic quantities in the quantum corrected Reissner-Nordstr?m-AdS(RN-AdS)black hole,and examine their quantum corrections.By analyzing the mass and heat capacity,we give the critical state and the remnant state,respectively,and discuss their consistency.Then,we investigate the quantum tunneling from the event horizon of massless scalar particle by using the null geodesic method,and charged massive boson W^(±)and fermions by using the Hamilton-Jacob method.It is shown that the same Hawking temperature can be obtained from these tunneling processes of different particles and methods.Next,by using the generalized uncertainty principle(GUP),we study the quantum corrections to the tunneling and the temperature.Then the logarithmic correction to the black hole entropy is obtained.
基金supported by the National Key R&D Program of China(2021YFA0718500)the National Natural Science Foundation of China(NSFC,Grant No.12133007)partially supported by the International Partnership Program of Chinese Academy of Sciences(Grant No.113111KYSB20190020)。
文摘We present a comprehensive analysis of the 2021 outburst of MAXI J1803–298 utilizing observations of the Insight-Hard X-ray Modulation Telescope(Insight-HXMT)spanning from the low hard state to the high soft state.Within the Insight-HXMT data set,compared to the previous work,we identify a more prolonged presence of typeC quasi-periodic oscillations(QPOs)with centroid frequencies ranging from~0.16 to 6.3 Hz,which present correlations with the hardness ratio and the photon index of the Comptonized component.For QPO frequencies less than~2 Hz,the QPO phase lags are hard(photons of 10–19 keV arrive later than those of 1–4 keV),while at higher frequencies,the lags become soft at and above~4 Hz.Furthermore,the spectra in all Insight-HXMT observations consist of a multi-color blackbody component and a Comptonized component,as commonly observed in classical black hole X-ray binaries.We analyze state transitions and the evolution of accretion geometry in this work.The fitted inner disk radius increases abnormally during the low hard state,hypothesized to result from the corona condensing onto the inner disk.Additionally,two significant drops in flux are observed during the soft intermediate state,maybe implying changes in the corona/jet and the disk,respectively.
文摘Here we present the foundations of the Scale-Symmetric Theory (SST), i.e. the fundamental phase transitions of the initial inflation field, the atom-like structure of baryons and different types of black holes. Within SST we show that the transition from the nuclear strong interactions in the off-shell Higgs boson production to the nuclear weak interactions causes that the real total width of the Higgs boson from the Higgs line shape (i.e. 3.3 GeV) decreases to 4.3 MeV that is the illusory total width. Moreover, there appear some glueballs/condensates with the energy 3.3 GeV that accompany the production of the off-shell Higgs bosons.
基金supported by the National SKA Program of China(2020SKA01201000,2020SKA0120300)supported by the National Natural Science Foundation of China(NSFC)grant No.12203017+7 种基金supported by the NSFC(11975027,11991053)the NSFC(grant No.12273042)supported by NSFC grant No.42174059supported by NSFC grant No.12247180the Max Planck Partner Group Program funded by the Max Planck Societysupported by the National Key R&D Program of China(2021YFA0718500)the support by the Young Top-notch Talent Cultivation Program of Hubei Provincethe support from the Chinese Academy of Sciences(grant No.E329A3M1)。
文摘The equilibrium configuration of a solid strange star in the final inspiral phase with another compact object is generally discussed,and the starquake-related issue is revisited,for a special purpose to understand the precursor emission of binary compact star merger events(e.g.,that of GRB211211A).As the binary system inspirals inward due to gravitational wave radiation,the ellipticity of the solid strangeon star increases due to the growing tidal field of its compact companion.Elastic energy is hence accumulated during the inspiral stage which might trigger a starquake before the merger when the energy exceeds a critical value.The energy released during such starquakes is calculated and compared to the precursor observation of GRB211211 A.The result shows that the energy might be insufficient for binary strangeon-star case unless the entire solid strangeon star shatters,and hence favors a black hole-strangeon star scenario for GRB211211A.The timescale of the precursor as well as the frequency of the observed quasi-periodic-oscillation have also been discussed in the starquake model.
文摘With the growth of deep drilling and the complexity of the well profile,the requirements for a more complete and efficient exploitation of productive formations increase,which increases the risk of various complications.Currently,reagents based on modified natural polymers(which are naturally occurring compounds)and synthetic polymers(SPs)which are polymeric compounds created industrially,are widely used to prevent emerging complications in the drilling process.However,compared to modified natural polymers,SPs form a family of high-molecular-weight compounds that are fully synthesized by undergoing chemical polymerization reactions.SPs provide substantial flexibility in their design.Moreover,their size and chemical composition can be adjusted to provide properties for nearly all the functional objectives of drilling fluids.They can be classified based on chemical ingredients,type of reaction,and their responses to heating.However,some of SPs,due to their structural characteristics,have a high cost,a poor temperature and salt resistance in drilling fluids,and degradation begins when the temperature reaches 130℃.These drawbacks prevent SP use in some medium and deep wells.Thus,this review addresses the historical development,the characteristics,manufacturing methods,classification,and the applications of SPs in drilling fluids.The contributions of SPs as additives to drilling fluids to enhance rheology,filtrate generation,carrying of cuttings,fluid lubricity,and clay/shale stability are explained in detail.The mechanisms,impacts,and advances achieved when SPs are added to drilling fluids are also described.The typical challenges encountered by SPs when deployed in drilling fluids and their advantages and drawbacks are also discussed.Economic issues also impact the applications of SPs in drilling fluids.Consequently,the cost of the most relevant SPs,and the monomers used in their synthesis,are assessed.Environmental impacts of SPs when deployed in drilling fluids,and their manufacturing processes are identified,together with advances in SP-treatment methods aimed at reducing those impacts.Recommendations for required future research addressing SP property and performance gaps are provided.
文摘Wireless technology is transforming the future of transportation through the development of the Internet of Vehicles(IoV).However,intricate security challenges are intertwinedwith technological progress:Vehicular ad hoc Networks(VANETs),a core component of IoV,face security issues,particularly the Black Hole Attack(BHA).This malicious attack disrupts the seamless flow of data and threatens the network’s overall reliability;also,BHA strategically disrupts communication pathways by dropping data packets from legitimate nodes altogether.Recognizing the importance of this challenge,we have introduced a new solution called ad hoc On-Demand Distance Vector-Reputation-based mechanism Local Outlier Factor(AODV-RL).The significance of AODVRL lies in its unique approach:it verifies and confirms the trustworthiness of network components,providing robust protection against BHA.An additional safety layer is established by implementing the Local Outlier Factor(LOF),which detects and addresses abnormal network behaviors.Rigorous testing of our solution has revealed its remarkable ability to enhance communication in VANETs.Specifically,Our experimental results achieve message delivery ratios of up to 94.25%andminimal packet loss ratios of just 0.297%.Based on our experimental results,the proposedmechanismsignificantly improves VANET communication reliability and security.These results promise a more secure and dependable future for IoV,capable of transforming transportation safety and efficiency.
基金supported by the National Natural Science Foundation of China (No.U21B2071).
文摘Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress interference,which results in uneven fracture propagation. It is common practice to use “balls” to temporarily plug fractureopenings in order to lessen liquid intake and achieve uniform propagation in each cluster. In this study, a diameteroptimization model is introduced for these plugging balls based on a multi-cluster fracture propagationmodel and a perforation dynamic abrasion model. This approach relies on proper consideration of the multiphasenature of the considered problem and the interaction force between the involved fluid and solid phases. Accordingly,it can take into account the behavior of the gradually changing hole diameter due to proppant continuousperforation erosion. Moreover, it can provide useful information about the fluid-dynamic behavior of the consideredsystem before and after plugging. It is shown that when the diameter of the temporary plugging ball is1.2 times that of the perforation hole, the perforation holes of each cluster can be effectively blocked.
基金supported by the National Key R&D Program of China(grant No.2022YFC2204602 and 2021YFC2203102)Strategic Priority Research Program of the Chinese Academy of Science(grant No.XDB0550300)+4 种基金the National Natural Science Foundation of China(NSFC,Grant Nos.12325301 and 12273035)the Fundamental Research Funds for the Central Universities(grant No.WK2030000036 and WK3440000004)the Science Research Grants from the China Manned Space Project(grant No.CMS-CSST-2021-B01)the 111 Project for“Observational and Theoretical Research on Dark Matter and Dark Energy”(grant No.B23042)supported in part by the National Key Research and Development Program of China grant No.2022YFC2807303。
文摘In this work, we consider a conventional test of gravitational wave(GW) propagation which is based on the phenomenological parameterized dispersion relation to describe potential departures from General Relativity(GR)along the propagation of GWs. But different from tests conventionally performed previously, we vary multiple deformation coefficients simultaneously and employ the principal component analysis(PCA) method to remedy the strong degeneracy among deformation coefficients and obtain informative posteriors. The dominant PCA components can be better measured and constrained, and thus are expected to be more sensitive to potential departures from the waveform model. Using this method we analyze ten selected events and get the result that the combined posteriors of the dominant PCA parameters are consistent with GR within 99.7% credible intervals. The standard deviation of the first dominant PCA parameter is three times smaller than that of the original dispersion parameter of the leading order. However, the multi-parameter test with PCA is more sensitive to not only potential deviations from GR but also systematic errors of waveform models. The difference in results obtained by using different waveform templates hints that the demands of waveform accuracy are higher to perform the multiparameter test with PCA. Whereas, it cannot be strictly proven that the deviation is indeed and only induced by systematic errors. It requires more thorough research in the future to exclude other possible reasons in parameter estimation and data processing.
文摘In the study of Terrestrial Gamma-ray Flashes (TGFs) and Sonoluminescence, we observe parallels with larger cosmic events. Specifically, sonoluminescence involves the rapid collapse of bubbles, which closely resembles gravitational collapse in space. This observation suggests the potential formation of low-density quantum black holes. These entities, which might be related to dark matter, are thought to experience a kind of transient evaporation similar to Hawking radiation seen in cosmic black holes. Consequently, sonoluminescence could be a valuable tool for investigating phenomena typically linked to cosmic scale events. Furthermore, the role of the Higgs boson is considered in this context, possibly connecting it to both TGFs and sonoluminescence. This research could enhance our understanding of the quantum mechanics of black holes and their relation to dark matter on Earth.
基金supported by the Open Fund of the State Key Laboratory of Advanced Optical Communication Systems and Networks (SJTU)(Grant No. 2023GZKF018)the Open Fund of IPOC (BUPT)(Grant No. IPOC2021B03)+4 种基金the National Natural Science Foundation of China (NSFC)(Grant No. 11974188)the China Postdoctoral Science Foundation (Grant Nos. 2021T140339 and 2018M632345)the Jiangsu Province Postdoctoral Science Foundation (Grant No. 2021K617C)the Postgraduate Research and Practice Innovation Program of Jiangsu Province (Grant No.KYCX22_0945)the Qing Lan Project of Jiangsu Province
文摘A photonic crystal nanobeam cavity(M-PCNC)with a structure incorporating a mixture of diamond-shaped and circular air holes is pro-posed.The performance of the cavity is simulated and studied theoretically.Using thefinite-difference time-domain method,the parameters of the M-PCNC,including cavity thickness and width,lattice constant,and radii and numbers of holes,are optimized,with the quality factor Q and mode volume Vm as performance indicators.Mutual modulation of the lattice constant and hole radius enable the proposed M-PCNC to realize outstanding performance.The optimized cavity possesses a high quality factor Q 1.45105 and an ultra-small mode=×volume Vm 0.01(λ/n)[Zeng et al.,Opt Lett 2023:48;3981–3984]in the telecommunications wavelength range.Light can be progres-=sively squeezed in both the propagation direction and the perpendicular in-plane direction by a series of interlocked anti-slots and slots in the diamond-shaped hole structure.Thereby,the energy can be confined within a small mode volume to achieve an ultra-high Q/Vm ratio.