The radiation characteristics of a doubly curved shaped reflector antenna with random holes is analyzed by physical optics (PO) method, and the probability model of the random holes and its numerical realization metho...The radiation characteristics of a doubly curved shaped reflector antenna with random holes is analyzed by physical optics (PO) method, and the probability model of the random holes and its numerical realization method are presented. The radiation patterns show that in the azimuth plane the peak sidelobe level becomes much higher as the reflector surface with random holes. The simulation results can provide a theoretical guidance for the radar attackers.展开更多
Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress i...Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress interference,which results in uneven fracture propagation. It is common practice to use “balls” to temporarily plug fractureopenings in order to lessen liquid intake and achieve uniform propagation in each cluster. In this study, a diameteroptimization model is introduced for these plugging balls based on a multi-cluster fracture propagationmodel and a perforation dynamic abrasion model. This approach relies on proper consideration of the multiphasenature of the considered problem and the interaction force between the involved fluid and solid phases. Accordingly,it can take into account the behavior of the gradually changing hole diameter due to proppant continuousperforation erosion. Moreover, it can provide useful information about the fluid-dynamic behavior of the consideredsystem before and after plugging. It is shown that when the diameter of the temporary plugging ball is1.2 times that of the perforation hole, the perforation holes of each cluster can be effectively blocked.展开更多
This design offer the two way stop used plate on warp. It is applicable to textile equipment, especially for loom equipment. The characteristics are that there are two similar long grooves in the different sides of th...This design offer the two way stop used plate on warp. It is applicable to textile equipment, especially for loom equipment. The characteristics are that there are two similar long grooves in the different sides of the yarn hole, so that it can be used in two way and the life cycle is twice as long as that of the present one.展开更多
文摘The radiation characteristics of a doubly curved shaped reflector antenna with random holes is analyzed by physical optics (PO) method, and the probability model of the random holes and its numerical realization method are presented. The radiation patterns show that in the azimuth plane the peak sidelobe level becomes much higher as the reflector surface with random holes. The simulation results can provide a theoretical guidance for the radar attackers.
基金supported by the National Natural Science Foundation of China (No.U21B2071).
文摘Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress interference,which results in uneven fracture propagation. It is common practice to use “balls” to temporarily plug fractureopenings in order to lessen liquid intake and achieve uniform propagation in each cluster. In this study, a diameteroptimization model is introduced for these plugging balls based on a multi-cluster fracture propagationmodel and a perforation dynamic abrasion model. This approach relies on proper consideration of the multiphasenature of the considered problem and the interaction force between the involved fluid and solid phases. Accordingly,it can take into account the behavior of the gradually changing hole diameter due to proppant continuousperforation erosion. Moreover, it can provide useful information about the fluid-dynamic behavior of the consideredsystem before and after plugging. It is shown that when the diameter of the temporary plugging ball is1.2 times that of the perforation hole, the perforation holes of each cluster can be effectively blocked.
文摘This design offer the two way stop used plate on warp. It is applicable to textile equipment, especially for loom equipment. The characteristics are that there are two similar long grooves in the different sides of the yarn hole, so that it can be used in two way and the life cycle is twice as long as that of the present one.
