The potential impact of increased whole grain consumption among Chinese adults on reducing healthcare costs and carbon footprint

Excessive consumption of refined grains harms human health and ecosystem viability.Whole grains,as a healthy and sustainable alternative to refined grains,can benefit individual health by providing dietary fiber,B vitamins,and bioactive substances.Additionally,they aid in improving the environment due to their higher extraction rate and lower carbon emission during the processing stage.However,few studies have attempted to evaluate the economic and social benefits of increasing the amount of whole grain in grain intake.This paper estimates the potential savings in healthcare costs and reduced food carbon footprints(CFs)that could result from a shift toward whole grain consumption following the Chinese Dietary Guidelines(CDG).We investigate hypothetical scenarios where a certain proportion(5–100%)of Chinese adults could increase their whole grain intakes as proposed by CDG to meet the average shortfall of 30.2 g.In that case,the healthcare costs for associated diseases(e.g.,type2 diabetes mellitus(T2DM),cardiovascular disease(CVD),and colorectal cancer(CRC))are expected to reduce by a substantial amount,from USD 2.82 to 56.37 billion;the carbon emission levels are also projected to decrease by0.24–5.72 million tons.This study provides compelling evidence that advocating for the transition towards greater consumption of whole grain products could benefit individual health,the environment,and society,by reducing both healthcare costs and carbon emissions.

Distribution Network Equipment Location and Capacity Planning Method Considering Energy Internet Attribute from the Perspective of Life Cycle Cost

For facing the challenges brought by large-scale renewable energy having access to the system and considering the key technologies of energy Internet,it is very necessary to put forward the location method of distribution network equipment and capacity from the perspective of life cycle cost.Compared with the traditional energy network,the equipment capacity problem of energy interconnected distribution network which involves in electricity network,thermal energy network and natural gas network is comprehensively considered in this paper.On this basis,firstly,the operation architecture of energy interconnected distribution network is designed.Secondly,taking the grid connection location and configuration capacity of key equipment in the system as the control variables and the operation cost of system comprehensive planning in the whole life cycle as the goal,the equipment location and capacity optimization model of energy interconnected distribution network is established.Finally,an IEEE 33 bus energy mutual distribution grid system is taken for example analysis,and the improved chaotic particle swarmoptimization algorithm is used to solve it.The simulation results show that the method proposed in this paper is suitable for the equipment location and capacity planning of energy interconnected distribution network,and it can effectively improve the social and economic benefits of system operation.

Improvement of the Life Cycle Costing Method in DesignStage Using KBIMS Library

With the advent of the fourth industrial revolution,the construction industry has undergone a paradigm shift.The smart construction technology market is expected to grow 12%annually in developed countries due to advanced technology investments.It is expected that businesses requiring highly sophisticated technology,for instance companies that need their old facilities upgraded,will become the main focus of the market.As building information modeling(BIM)design is becoming mandatory,such as in the Korea Public Procurement Service,researches regarding building automation,construction,and operation integration management systems based on BIM are conducted.In addition,for construction projects of over 10 billion won,design value engineering(Design VE)implementation,including life cycle cost(LCC)analysis,is mandatory at the design stage to improve quality and reduce the lifetime costs of buildings.In this study,we propose an improvement plan for LCC analysis at the design stage using the KBIMS library,which is an open BIM library developed by the Korean government and research groups.We analyze the existing LCC method,KBIMS library,and attribute information,and model the process that is applied in the LCC analysis system.This is expected to complement the LCC analysis system and improve work productivity.

A Life Cycle Cost Analysis Model of Goods Movement for the Gulf Cooperation Council Region

In this article,a total life cycle cost analysis(LCCA)was developed covering two transportation systems:trucking and railway within the Gulf Cooperation Council(GCC)region.GCC region is a regional intergovernmental political and economic union consists of six countries(Saudi Arabia,Kuwait,the United Arab Emirates,Qatar,Bahrain,and Oman).In general and based on statistics,the GCC regional economy is expected to grow due to the increase in aggregate supply and demand.So,there is a need to build a solid foundation of transportation systems that can help in transforming this region into a logistics hub.Therefore,different analysis was discussed in order to be able to select more reliable and appropriate mode of shipping between the GCC.Beside the main cost factors that which includes the capital,operational,maintenance and depreciation costs.Other factors such as,border delays,emissions,noise and safety factors were added to the analysis.The results show that,shipping using trucking system can be cheaper when shipping commodities between the GCC region,but at the same time considering border delays and emission produced,railways and intermodal modal systems prove to be more reliable.Moreover,shipping bulk commodities favor the rail and intermodal systems due to the payload capacity besides the flexibility of finding the most efficient way to move the shipments between origin and destinations.

Analysis on Sustainable Development of Tire Industry Cluster based on Life Cycle Theory

The research on the tire industry cluster based on life cycle theory can be carried out by a four stage periods,namely initial period,growth period,maturity period,and recession period.This paper analyzes on the possible risks taken in each life cycle period as well as proposes corresponding suggestions to strengthen the research by looking into the conditions and factors of the continuous sustainable development process in a tire industry.

Research on Ecological Assessment and Dynamic Optimization of Energy-saving and New Energy Vehicle Business Model Based on Full Life Cycle Theory

The rapid development of China’s automobile industry has brought ever-increasing impact on resources,energy and environment,the energy-saving and new energy vehicles come into being accordingly.This article firstly systematically introduces the technical route of energy-saving and new energy vehicles of China,focusing on the key bottleneck problems arising from the construction process of current assessment system of the technical route for energy-saving and new energy vehicles,establishes the energy-saving and new energy vehicle business model assessment index system afterward based on the comparative analysis on energy-saving and new energy vehicle business assessment model and the full life cycle theory,and finally makes prospects and forecasts on vital problems of system boundary,dynamic optimization,simulation system of full life cycle assessment of energy-saving and new energy vehicle.

An Investigation into the Life Cycle Cost of a Typical Computer Numerical Control Machine

This paper relates to a typical computer numerical control (CNC) machine, model FDXNC 128, and analyzes the payoff period quantitatively and forecasts the future maintenance cost and the evaluation of the economic benefit by using Life Cycle Cost (LCC) method and grey theory. The discussion shows conclusions that are beneficial to the production, management, and decision making of the enterprise.

IFC implementation in lifecycle costing

Life Cycle Costing (LCC) is always a major concern in the Architecture, Engineering and Construction (AEC) industry. This paper presents the implementation of Building Information Modeling (BIM) technology in the development of a lifecycle cost-estimating tool. The IFC (Industry Foundation Classes) model as an interoperable building information model has been adopted as the central data repository to deliver the integrated information of building designs from CAD design systems into the lifecycle-costing database. In this paper, the conceptions and relevant factors, which could affect the LCC estimation, have been introduced. The problems of current LCC applications have been identified as the lack of LCC data and the complexity of LCC exercises. The software application of IFC models and relevant auxiliary are depicted as a solution of the problem identified. The lifecycle costing tool is a part of the nD Modeling tool and as such is based on its integrated interface prototype toolkit and is able to holistically present an IFC model into a 3D virtual reality view, a tree-view and a list of element properties. The functions and some technical points are also detailed in the paper. Through the research, it demonstrates the potential and possibility of implementing BIM methods and techniques, particularly IFCs to enhance the computer applications in the processes of building construction and facility management.

Multi-objective Transmission Expansion Planning Considering Life Cycle Cost

为克服目前全寿命周期成本（life cycle cost,LCC）技术的应用局限于设备运行或维护阶段的不足,针对输电网整体建立一个3维LCC层级模型,包括时间维度、元件维度和费用维度。费用维度进一步分解为设备级、系统级、外部环境成本。研究了以可靠性为中心的维护手段的应用对维护成本的影响,利用电量不足期望值计算故障成本。在此基础上,对风电等4种不确定因素进行建模,建立以LCC成本最小和切负荷量最小为多目标的输电网机会约束规划模型。采用正态边界交点算法联合改进小生境遗传算法,对模型有效求解。最后,分别对18节点系统和77节点系统进行算例分析。研究结果给出了帕累托解集及推荐的最优规划方案;此外,LCC费用分解图表明了各费用的比重和影响,有利于指导未来资产管理。

Sequential fault diagnosis strategy with imperfect tests considering life cycle cost

The problem of sequential fault diagnosis is to construct a diagnosis tree that can isolate the failure sources with minimal test cost. Pervious sequential fault diagnosis strategy generating algorithms only consider the execution cost at application stage, which may result in a solution with poor quality from the view of life cycle cost. Furthermore, due to the fact that uncertain information exists extensively in the real-world systems, the tests are always imperfect. In order to reduce the cost of fault diagnosis in the realistic systems, the sequential fault diagnosis problem with imperfect tests considering life cycle cost is presented and formulated in this work, which is an intractable NP-hard AND/OR decision tree construction problem. An algorithm based on AND/OR graph search is proposed to solve this problem. Heuristic search based on information theory is applied to generate the sub-tree in the algorithm. Some practical issues such as the method to improve the computational efficiency and the diagnosis strategy with multi-outcome tests are discussed. The algorithm is tested and compared with previous algorithms on the simulated systems with different scales and uncertainty. Application on a wheel momentum system of a spacecraft is studied in detail. Both the simulation and application results suggest that the cost of the diagnosis strategy can be reduced significantly by using the proposed algorithm, especially when the placement cost of the tests constitutes a large part of the total cost.

An ideal point method adopting grey relational entropy to estimate life cycle cost with effectiveness of torpedo

To making the decision of the developing blue prints,ideal point method was selected to estimate the life cycle cost with effectiveness of torpedo.At the same time,the concept of grey relational entropy of the grey system theory was adopted to compute the distance between each blue print and the ideal point(or negative ideal point).The blue print,nearest to the ideal point and farthest to the negative ideal point,is the best one.As an example,four blue prints of torpedo were estimated.The result indicates the practical value of this method.

Life cycle cost analysis of new FRP based solar parabolic trough collector hot water generation system

Parabolic trough collectors (PTCs) are employed for a variety of applications including steam generation and hot water generation. This paper deals with the experimental results and an economic analysis of a new fibre reinforced plastic (FRP) based solar PTC with an embedded electronic controlled tracking system designed and developed for hot water generation in a restaurant in Madurai, India. The new collector performance has been tested according to ASHRAE Standard 93 (1986). The performance of a new PTC hot water generation system with a well mixed hot water storage tank is investigated by a series of extensive tests over ten months period. The average maximum storage tank water temperature observed was 74.91 °C, when no energy is withdrawn from the tank to the load during the collection period. The total cost of the new economic FRP based solar PTC for hot water generation with an embedded electronic controlled tracking system is Rs. 25000 (US$ 573) only. In the present work, life cycle savings (LCS) method is employed for a detailed economic analysis of the PTC system. A computer program is used as a tool for the economic analysis. The present worth of life cycle solar savings is evaluated for the new solar PTC hot water generation system that replaces an existing electric water heating system in the restaurant and attains a value of Rs. 23171.66 after 15 years, which is a significant saving. The LCS method and the MATLAB computer simulation program presented in this paper can be used to estimate the LCS of other renewable energy systems.

Application of Grey System Theory in Design For Cost (DFC)

Design For Cost (DFC) is a branch of Design For X (DFX). In this paper, wedefined DFC as a design method that analyzed and evaluated the product's life cycle cost (LCC), thenmodified the design to reduce the LCC. Nowadays it is a very difficult thing to obtain LCC data inChina or in developing countries. Statistical methods can not be used because available LCC data arefew. In order to solve this problem, we used grey system theory. Then relations of cost factorswere analyzed in LCC using grey relevant methods, and a GM(1,1) model between design parameters andLCC was established. Using this model, we can estimate and control LCC by changing design parametersat the beginning of the design stage.

Tradeoff Analysis for RMS of Equipment Based Operation Availability and Life Cycle Cost

Reliability, maintainability, supportability （RMS） are the important performance indexes of equipment, which affect not only the availability, but also the life cycle cost （LCC） of the equipment. First discussed is the qualitative relation between reliability and LCC and the costs which may be used to enhance the reliability. Secondly, the factors that affect the maintainability are summarized, and if maintainability is advanced, the trend of the LCC is depicted. Thirdly, the qualitative relation between the supportability and LCC is described. Reliability, maintainability and supportability index all have a relation with the availability, so this paper presents the tradeoff for RMS indexes based on the availability calculation models and LCC models. On the condition that the availability value is not below the given value, the decision-making is optimal if the life cycle cost is the minimum value.

Probabilistic Analysis of Life Cycle Cost for Power Transformer

The selection of power transformer is very important to power sector. Most methods are utilized according to the initial cost and don’t consider the synthetical evaluation of economy and technology. Based on previous research, this paper addresses a new practical probabilistic life cycle cost model. Then, in order to demonstrate the practicability of probabilistic life cycle cost for the power transformer, illustrative investment alternatives of actual power transformers are discussed. From the result of the numerical investigation, it may be positively stated that the optimum investment alternative for the power transformer based on the probabilistic life cycle cost model proposed in this study will lead to a more rational, economical and effective procedure compared with the conventional method only considering the initial cost.

Application of Steel Fiber in Increasing the Strength, Life-Period and Reducing Overall Cost of Road Construction (by Minimizing the Thickness of Pavement)

Recently, the use of steel fiber at high rates has been introduced as the sole method of reinforcement for fully elevated-suspended slabs having long span such as 5 m to 8 m each way, with a span to depth ratio of up to 33 [1]. As a result of long practical experience the total replacement of traditional rebar is a new routine. Now it is also used in the designing of SFRC pavements over conventional concrete pavements. Within the project framework a demonstration of a steel-fiber-reinforced roller-compacted concrete (SFR-RCC) pavement was constructed in a rural as well as urban area. In order to assess the economical condition of the demonstration pavement, life cycle assessment (LCA) and life cycle cost analysis (LCCA) studies were undertaken. This is the advancement study of the various papers which is already published in many publications which serve as the main and important source of study for the research. Many applications of steel fiber are listed in the paper but the main output of this paper is that SFR-RCC is more economically sustainable than others and also helps in reducing the thickness of the pavement up to 20 to 25 percent, due to the excessive strength of steel fiber. The roads of the present system required high cost investment. And the life period is almost 20 years theoretically but the actual life of the road is depending on the maintenance and the applied load. The constructions of road have been done since the 3500 BC but the method does not change fully. Also the cost of the construction is increased continuously;as a result, the construction of roads is more and more complicated and time taken. For the better and economical construction of the roads, we use steel fibers in the composite pavement. The theoretical plan of the construction of composite pavement is given in the methodology, which gives the appropriate idea about the construction of road using steel fiber. Here we use the composite pavement in which the steel fiber is mixed in the concrete layer, after which the bitumen layer is laid for the smooth and suitable riding of the vehicles.