Study of the Thermal Characteristics of a Geomaterial:Case of SavèGranites in the Republic of Benin

This work focuses on the valorization of local materials.The rock that is granite,a material used in construction thanks to its mechanical resistance,is the subject of our study.The granite of the commune of Savè,made it possible to appreciate the thermal behavior of this rock studied with a view to its use as a building material.To this end,a thermal diffusivity measurement test was carried out on this material.Thus,we made samples which were then connected to a data acquisition box via thermocouples.A Python script is used to ensure the collection of temperature values over time.From this thermal diffusivity test carried out on the granite taken from the Savèbreasts,we obtained an average diffusivity a=5.84×10^(-6)m^(2)/s.As a result,the thermal effusivity and the heat capacity of the material were determined having respectively the value 1,351.09 J/(K·m^(2)·s^(1/2))and 547,945.21 J/(m^(3)·K).These different results highlight a thermal characterization of Savègranites as a relevant material in the design and construction of an energy-efficient eco-housing.

Physical and Thermo-Mechanical Properties of Composite Materials Based on Raw Earth and Crushed Palm Leaf Fibers (Borassus aethiopum)

The objective of this study is to seek solutions to reduce the impact of buildings on climate change and to promote the use of local bio-sourced or geo-sourced materials for sustainable construction. Different samples of raw earth from 3 sites were taken in the commune of Mlomp. Geotechnical tests showed that the raw earth samples from sites 2 and 3 have more clay fraction while site 1 contains more sand. The fact of integrating fibers from crushed palm leaves (Borassus aethiopum) (2%, 4% and 6%) into the 3 raw earth samples reduced the mechanical resistance to compression and traction of the 3 raw earths. The experimental results of thermal tests on samples of earth mixtures with crushed Palma leaf fibers show a decrease in thermal conductivity as well as thermal effusivity as the percentages increase (2%, 4% and 6%) of fibers in raw earth for the 3 sites. This shows that this renewable composite material can help improve the thermal insulation of building envelopes.

Investigation on the key aspects of l-arginine para nitrobenzoate monohydrate single crystal:A non-linear optical material

In the contemporary days, non-linear optical materials(NLO) are getting higher attention as per the increasing demand in optical communication and data storage technology. Consequently, they explore various physical properties of the NLO material for their industrial applications. In current report, l-arginine p-nitrobenzoate monohydrate(LANB) single crystals were obtained by adopting slow cooling technique. The structural confirmation of grown single crystal was carried out using single crystal X-Ray diffractometer. Presence of strain within single crystal was deduced using Hall–Williamson relation. Various defects associated within single crystal were assessed using high resolution XRD. Additionally, its crystalline quality was again confirmed by time resolved photoluminescence spectroscopy(TRPL). Using transmission spectra, the cut off wavelength and band gap of the host material was determined to be nearly 420 nm and 2.9 e V respectively. The dielectric property has been recorded by varying the frequency ranging from 50 Hz to 100 k Hz. The curve suggests that dielectric loss value is less at high frequency ensures the suitability of crystal in photonics and NLO based devices.The laser damage threshold values were also measured for single and multiple shots. Thermal parameters of the titled compound were calculated using PPE. In photoconductivity measurement, negative photoconductivity has been observed in titled compound. Microhardness studies were also performed on single crystal to explore its mechanical properties.