Effect of hydrogen fluoride and magnesium oxide on AZ31 Mg alloy/carbon fiber-reinforced plastic composite by thermal laser joining technique

Although hydrofluoric acid(HF)surface treatment is known to enhance the joining of metals with polymers,there is limited information on its effect on the joining of AZ31 alloy and carbon-fiber-reinforced plastics(CFRPs)through laser-assisted metal and plastic direct joining(LAMP).This study uses the LAMP technique to produce AZ31-CFRP joints.The joining process involves as-received AZ31,HFpretreated AZ31,and thermally oxidized HF-pretreated AZ31 alloy sheets.Furthermore,the bonding strength of joints prepared with thermally oxidized AZ31 alloy sheets is examined to ascertain the combined effect of HF treatment and thermal oxidation on bonding strength.The microstructures,surface chemical interactions,and mechanical performances of joints are investigated under tensile shear loading.Various factors,such as bubble formation,CFRP resin decomposition,and mechanical interlocking considerably affect joint strength.Additionally,surface chemical interactions between the active species on metal parts and the polar amide along with carbonyl groups of polymer play a significant role in improving joint strength.Joints prepared with surface-pretreated AZ31 alloy sheets show significant improvements in bonding strength.

A rationale for the development of thermally stable nanostructured CeO_2-ZrO_2-containing mixed oxides

CeO2-ZeO2 solid solutions are extensively used as oxygen storage promoters in the current automotive three-way catalysts. High thermal stability of the textural properties is one of the most important requirements for practical application since temperatures up to 1273 K are easily experienced by these materials under real working conditions. In the present paper, we investigated how hydrothermal treatments applied to cakes of doped and undoped ZrO2-rich CeO2-ZrO2 precursors might improve the thermal stability of the final CeO2-ZrO2 solid solution. A rationale was developed that allowed to correlate the morphology of the hydrothermaUy treated cake with the thermal stability at 1273 K of the final product, which did not depend on the composition of the mixed oxides.

Structural and optical properties of thermally reduced graphene oxide for energy devices

Natural intercalation of the graphite oxide, obtained as a product of Hummer＇s method, via ultra-sonication of water dispersed graphite oxide has been carried out to obtain graphene oxide（GO） and thermally reduced graphene oxide（RGO）.Here we report the effect of metallic nitrate on the oxidation properties of graphite and then formation of metallic oxide（MO） composites with GO and RGO for the first time. We observed a change in the efficiency of the oxidation process as we replaced the conventionally used sodium nitrate with that of nickel nitrate Ni（NO_3）_2, cadmium nitrate Cd（NO_3）_2,and zinc nitrate Zn（NO_3）_2. The structural properties were investigated by x-ray diffraction and observed the successful formation of composite of MO–GO and MO–RGO（M = Zn, Cd, Ni）. We sought to study the effect on the oxidation process through optical characterization via UV-Vis spectroscopy and Fourier Transform Infrared（FTIR） spectroscopy.Moreover, Thermo Gravimetric Analysis（TGA） was carried out to confirm 〉 90% weight loss in each process thus proving the reliability of the oxidation cycles. We have found that the nature of the oxidation process of graphite powder and its optical and electrochemical characteristics can be tuned by replacing the sodium nitrate（NaNO_3） by other metallic nitrates as Cd（NO_3）_2, Ni（NO_3）_2, and Zn（NO_3）_2. On the basis of obtained results, the synthesized GO and RGO may be expected as a promising material in antibacterial activity and in electrodes fabrication for energy devices such as solar cell, fuel cell,and super capacitors.

Unexpected Selective Absorption of Lithium in Thermally Reduced Graphene Oxide Membranes

Lithium plays an increasingly important role in scientific and industrial processes, and it is extremely important to extract lithium from a high Mg^(2+)/Li^(+) mass ratio brine or to recover lithium from the leachate of spent lithiumion batteries. Conventional wisdom shows that Li^(+) with low valence states has a much weaker adsorption(and absorption energy) with graphene than multivalent ions such as Mg^(2+). Here, we show the selective adsorption of Li^(+) in thermally reduced graphene oxide(rGO) membranes over other metal ions such as Mg^(2+), Co^(2+), Mn^(2+),Ni^(2+), or Fe^(2+). Interestingly, the adsorption strength of Li^(+) reaches up to 5 times the adsorption strength of Mg^(2+),and the mass ratio of a mixed Mg^(2+)/Li^(+) solution at a very high value of 500 : 1 can be effectively reduced to 0.7 : 1 within only six experimental treatment cycles, demonstrating the excellent applicability of the rGO membranes in the Mg^(2+)/Li^(+) separation. A theoretical analysis indicates that this unexpected selectivity is attributed to the competition between cation–π interaction and steric exclusion when hydrated cations enter the confined space of the rGO membranes.

Compositional and structural evolution of the titanium dioxide formation by thermal oxidation

Titanium oxide films were prepared by annealing DC magnetron sputtered titanium films in an oxygen ambient. X-ray diffraction （XRD）, Auger electron spectroscopy （AES） sputter profiling, MCs^＋-mode secondary ion mass spectrometry （MCs^＋-SIMS） and atomic force microscopy （AFM） were employed, respectively, for the structural, com- positional and morphological characterization of the obtained films. For temperatures below 875 K, titanium films could not be fully oxidized within one hour. Above that temperature, the completely oxidized films were found to be rutile in structure. Detailed studies on the oxidation process at 925K were carried out for the understanding of the underlying mechanism of titanium dioxide （TiO2） formation by thermal oxidation. It was demonstrated that the formation of crystalline TiO2 could be divided into a short oxidation stage, followed by crystal forming stage. Relevance of this recognition was further discussed.

PREPARATION OF ELECTRICAL CONDHCTIVE MOLYBDENUM OXIDE BY THERMAL DECOMPOSITION OE HYDRAZINE-CONTAINING MOLYBDENUM SALT

A new method of preparing electrical conductive molybdenum oxide by thermal decomposition from hydrazine-containing molybdenum salt was described.The process of the thermal decomposition of hydrazine- containing molybdemum salt was investigated by thermal analysis(TG and DTA) and the thermally decomposed product was studied by S.E.M.and chemical analysis.The result indicated that the molybdenum oxide obtained in this way was electrical conductive.

Effects of thermal oxidation on microwave-absorbing and mechanical properties of SiC_f/SiC composites with PyC interphase

The SiCf/SiC composites containing PyC interphase were prepared by chemical vapor infiltration process. The influences of thermal oxidation on the complex permittivity and microwave absorption properties of Si Cf/Si C composites were investigated in the frequency range of 8.2-12.4 GHz. Both the real and imaginary parts of the complex permittivity decreased after thermal oxidation. The composites after 100 h thermal oxidation showed that reflection loss exceeded-10 d B in the frequency of 9.7-11.9 GHz and the minimum value was-11.4 d B at 11.0 GHz. The flexural strength of composites decreased but fracture behavior was improved obviously after thermal oxidation. These results indicate that the SiCf/SiC composites containing PyC interphase after thermal oxidation possess good microwave absorbing property and fracture behavior.

Thermal Oxidative Aging Characterization of SBS Modified Asphalt

Both macro and micro-methods were introduced to study the physical and chemical properties of thermal oxidative aging of SBS （styrene-butadiene-styrene） modified asphalt. The physical properties of SBS modified asphalt before and after aging were analyzed by normal tests. The structure and quality variation of SBS modified asphalt during the aging process was analyzed by FTIR （Fourier transform infrared spectrum）. FTIR result shows that the degeneration of SBS modified asphalt is mainly caused by oxidative reaction and rupture of C=C double bond. The molecular weight variations of asphalt function groups and SBS polymer were studied by GPC （Gel Permeation Chromatography）. GPC result shows that small molecules transform into larger one in asphalt and SBS polymer molecule degrade during the aging process. SBS polymer may lose its modifying function after long time aging.

Thermal Oxidative Degradation and Ageing Performance of Silicone Rubber Filled with Attapulgite

The natural attapulgite(NAPT)was disaggregated by high-pressure homogenization technology combined with extrusion process to prepare the attapulgite with disaggregated rod crystal bundles(DAPT)and large specific surface area of 133.7 m^(2)/g.NAPT and DAPT were incorporated into the silicone rubber to obtain the composite NAPTSR and DAPT-SR by mechanical blending method,respectively.After thermal oxidative ageing at 300℃ for 0.5 h,temperature for the 5%weight loss increased greatly from 385℃ of the neat silicone rubber to 396-399℃ with addition of NAPT and DAPT.NAPT and DAPT enhanced the interaction between the filler nanoparticles and rubber matrix thus inhibited the nanoparticle agglomeration.The conservation rate of the side methyl group in NAPT-SR and DAPT-SR was greatly improved after ageing.Therefore,the thermal oxidative degradation and ageing performance of the silicone rubber composites was significantly reinforced.Moreover,DAPT could greatly restrain the growth of nanoparticles after ageing.Therefore,DAPT-SR showed the better retention of tensile strength(40.6%),elongation at break(34.9%)and tear strength(30.1%)compared with the corresponding mechanical properties of the neat silicone rubber(10.6%,7.4%,and 5.0%)after ageing.

Evalution of Thermal Oxidative Degradation of Trimethylol-propane Trioleate by TG/DTA/DSC

In order to evaluate the thermal oxidation degradation behavior of lubricant with different antioxidants,the thermal kinetics equation based on the anlyses of thermogravimetry(TG),differential thermal analysis(DTA),and differential scanning calorimetry(DSC)was established,respectively,to calculate the activation energy of lubricant thermal-oxidative reaction.The thermal analyses of TG and DTA were employed to determine the thermal decomposition properties of ester oils trimethylolpropane trioleate(TMPTO)with butyl-octyl-diphenylamine/octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoate/amine-phenol combination antioxidant.The activation energy of the lubricating oil adding antioxidant is increased relative to the TMPTO base oil,and the order of activation energy are Ec(93.732 kJ·mol^(-1))>Ed(88.71 kJ·mol^(-1))>Eb(58.41 kJ·mol^(-1))>Ea(46.32 kJ·mol^(-1)).The experimental results show that octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoate in TMPTO has favorable resistance to thermal oxidation and decomposition.The thermal analysis method of DSC accurately reflects the heat exchange of lubricant thermal-oxidative reaction.The order of activation energy is calculated to ED(144.385 kJ·mol^(-1))>EC(110.05 kJ·mol^(-1))>EB(97.187 kJ·mol^(-1))>EA(66.02 kJ·mol^(-1)).It is illustrated that the amine-phenol combination antioxidant has the best thermal oxidation resistance,which is the same as what the oxidation onset temperature effected.

Effect of Supersonic Fine Particles Bombarding on the Service Life of Thermal Barrier Coating

Thermally Grown Oxide（TGO） is a dominating component in controlling the effectiveness of thermal barrier coating.During the growth of TGO,whether we could homogeneously distribute Al atom on the TGO and the intermediate metal layer will be the key factor in forming TGO with continuous,uniform and single-ingredient（Al2O3）.In this experiment,we bombarded particles on to the metallic bound layer.We studied the influence of supersonic particle bombardment on the diffusion of Al.We hope to control the growth of TGO by monitoring the diffusion of Al.Thermal barrier coating（TBC）,which consists of a NiCoCrAlY bond coat and a ZrO2-8Y2O3（wt.%） topcoat（TC）,is fabricated on the nickel-base superalloy by air plasma spray（APS）.NiCoCrAlY bond coat is treated by supersonic fine particles bombarding（SFPB）.The morphology,oxidation behavior of TBC and phase are characterized by scanning electron microscope（SEM） equipped with an energy dispersive spectromrter（EDS） and X-ray diffractometer（XRD）.The influence of supersonic fine particles bombarding technique on the service life of thermal barrier coating is studied.The results show that SFPB technique improves the flaw of excessive surface undulation in the as-sprayed bond coat.A continuous,uniform and single-ingredient（Al2O3） TGO can quickly form in the SFPB TBC during high temperature oxidation process.The thickening of TGO is relatively slow.These will effectively suppress the formation of other non-protective oxides.Therefore,SFPB technique reduces the growth stress level generated by the continuous growth of TGO,and also avoids the stress concentration induced by formation of the large particle spinal oxide.Thermal barrier coating still remains well after 350 thermal cycles.The service life of TBC is improved.The proposed research provides theoretical basis and technical references to further improve and enhance the SFPB technique.

Chronic consumption of thermally processed palm oil or canola oil modified gut microflora of rats

Dietary oils have critical influences on human health,and thermally cooking or frying modify the components and nutritional functions of oils.Palm oil was the most widely used oil in food processing industry,but its health effects remain debatable.In the current study,we aimed to compare the effects of thermally oxidized palm oil and canola oil on gut microbiota.Palm oil or canola oil were heated at 180°C for 10 h to prepare high-fat diets.Rats were fed high-fat diets for 3 months,and hematological properties,gut microflora composition and intestinal gene expression were examined.The results indicated that heated canola oil consumption elevated plasma total cholesterol and LDL-c levels compared with unheated canola oil,but heated palm oil do not had these effects;and consumption of heated palm oil significantly elevated the relative abundance of Lactobacillucs and Roseburia in gut,compared with non-heated palm oil or two canola oil groups.Moreover,intestinal expression of IL-22 was increased in heated palm oil fed animal,though ZO-1 and GPR41 were reduced.In conclusion,heating process may enhance the effects of palm oil on proliferation of probiotics Lactobacillucs,and weaken the effects of canola oil on cholesterol transport and metabolism.

Review of Numerical Simulation of TGO Growth in Thermal Barrier Coatings

Thermally grown oxide(TGO)is a critical factor for the service life of thermal barrier coatings(TBC).Numerical simulations of the growth process of TGO have become an effective means of comprehensively understanding the progressive damage of the TBC system.At present,technologies of numerical simulation to TGO growth include two categories:coupled chemical-mechanical methods and mechanical equivalent methods.The former is based on the diffusion analysis of oxidizing elements,which can describe the influence of bond coat(BC)consumption and phase transformation in the growth process of TGO on the mechanical behavior of each layer of TBC,and has high accuracy for the thickness evolution of TGO,but they cannot describe the lateral growth of TGO and the rumpling phenomenon induced.The latter focuses on describing the final stress and strain state after the growth of a specific TGO rather than the complete growth processes of TGO.Based on the measured TGO thickness growth curve,simulations of thickening and lateral growth can be achieved by directly applying anisotropic volumetric strain to oxidized elements and switching elements properties from the BC to the TGO.

Coalification and coal alteration under mild thermal conditions

Coalification temperatures are often considered to be approximately 100-170 ℃ for bituminous coal and 170-275 ℃ for anthracite. However, our micropetrographic observations, solid state ^27Al magic-angle spinning nuclear magnetic resonance measurements, interpretation of δ^13C values for whewellite in pelosiderite concretions from Carboniferous sediments, and assessment of whewellite thermal stability show that coalification temperatures can be significantly lower. Also the temperatures of coal alteration may be substantially lower than is stated. Ordinarily, high- temperature alteration is reported, but microthermometric measurements of fluids temperatures and micropetrographic observations show that the coal alteration can take place at low temperatures. For this reason, coals from the Kladno- Rakovnik Basin, part of Late Paleozoic continental basins of the Czech Republic, were analyzed. Regarding coalification, micropetrographic characterizations of unaltered coals, the presence of thermally unstable Al complexes in the coal organic mass documented using ^27Al MAS NMR method, and proven occurrence of whewellite in pelosiderite concretions suggest a lower coalification temperature, max. -70 ℃. Regarding coal alteration, micropetrographic observations revealed （a） the weaker intensity of fluorescence of liptinite, （b） mylonitic structures and microbreccia with carbonate fluid penetration, and （c） high oxygen content in coals （37-38 wt.%）. These phenomena are typical for thermal and oxidative alteration of coal. As the temperature of carbonate fluids inferred from fluid inclusion analysis was evaluated as -100-113 ℃, the temperature of coal alteration was suggested as -113℃; the alteration was caused by hot hydrothermal fluids.

Robust Particle Swarm Optimization Algorithm for Modeling the Effectof Oxides Thermal Properties on AMIG 304L Stainless Steel Welds

There are several advantages to the MIG(Metal Inert Gas)process,which explains its increased use in variouswelding sectors,such as automotive,marine,and construction.A variant of the MIG process,where the sameequipment is employed except for the deposition of a thin layer of flux before the welding operation,is the AMIG(Activated Metal Inert Gas)technique.This study focuses on investigating the impact of physical properties ofindividual metallic oxide fluxes for 304L stainless steel welding joint morphology and to what extent it can helpdetermine a relationship among weld depth penetration,the aspect ratio,and the input physical properties ofthe oxides.Five types of oxides,TiO_(2),SiO_(2),Fe_(2)O_(3),Cr_(2)O_(3),and Mn_(2)O_(3),are tested on butt joint design withoutpreparation of the edges.A robust algorithm based on the particle swarm optimization(PSO)technique is appliedto optimally tune the models’parameters,such as the quadratic error between the actual outputs(depth and aspectratio),and the error estimated by the models’outputs is minimized.The results showed that the proposed PSOmodel is first and foremost robust against uncertainties in measurement devices and modeling errors,and second,that it is capable of accurately representing and quantifying the weld depth penetration and the weld aspect ratioto the oxides’thermal properties.

P-Type Nitrogen-Doped ZnO Films Prepared by In-Situ Thermal Oxidation of Zn_3N_2 Films

P-type nitrogen-doped ZnO films are prepared successfully by in-situ thermal oxidation of Zn3N2 films. The prepared films are characterized by x-ray diffraction, non-Rutherford back.scattering （non-RBS） spectroscopy, x- ray photoelectron spectroscopy, and photoluminescence spectrum. The results show that the Zn3N1 films start to transform to ZnO at 400℃ and the total nitrogen content decreases with the increasing annealing temperature. The p-type fihns are achieved at 500℃ with a low resistivity of 6.33Ω.cm and a high hole concentration of ＋8.82 × 10^17 cm-3, as well as a low level of carbon contamination, indicating that the substitutional nitrogen （No） is an effective acceptor in the ZnO：N film. The photoluminescence spectra show clear UV emissions and also indicate the presence of oxygen vacancy （Vo） defects in the ZnO：N films. The p-type doping mechanism is briefly discussed.

Surface finish effect on dry sliding wear behavior of thermally oxidized commercially pure zirconium

The effect of surface polishing on the wear behavior of thermally oxidized commercial pure zirconium (CP-Zr) under dry sliding conditions was investigated. Surface ground CP-Zr with a roughness of 0.21 μm (Ra) was thermally oxidized (TO) at 650 °C for 6 h. After TO, some samples were polished to smoothen the surface with a finish of 0.04 μm (Ra). The response of the polished and unpolished TO samples to dry sliding wear was investigated under unidirectional sliding conditions. The results show that surface polishing after TO affects the dry sliding wear behavior of TO CP-Zr in several aspects, including coefficient of friction, wear rate, crack formation and oxide layer breakdown. In particular, it is found that smoothening the TO surface favors the formation of semi-circular cracks in the wear track and accelerates oxide layer breakdown during dry sliding. A slightly rough TO surface helps to reduce the tendency of the oxide layer towards cracking and to increase the wear resistance at high contact loads. The mechanisms involved are discussed in terms of asperity contacts, crack formation, propagation and final fracture.

Thermal Oxidation Resistance of Rare Earth-Containing Composite Elastomer

The rare earth-containing composite elastomer was obtained by the reaction of vinyl pyridine-SBR (PSBR) latex with rare earth alkoxides, and its thermal oxidation resistance was studied. After aging test, it is found that its retention rate of mechanical properties is far higher than that of the control sample. The results of thermogravimetric analysis show that its thermal-decomposing temperature rises largely. The analysis of oxidation mechanisms indicates that the main reasons for thermal oxidation resistance are that rare earth elements are of the utility to discontinue autoxidation chain reaction and that the formed complex structure has steric hindrance effect on oxidation.

Self-motivated,thermally oxidized hematite nanoflake photoanodes:Effects of pre-polishing and ZrO_(2) passivation layer

High-temperature thermal oxidation of an Fe foil produces a high-quality,crystalline hematite nanoflake suitable as a photoanode for the photoelectrochemical(PEC)water oxidation.Physical pre-polishing of the foil surface has a profound effect in the formation of a vertically-aligned nanoflakes of hematite phase with extended(110)planes by removing the loosely-bonded oxide layer.When the surface of the photoanode is modified with a ZrO_(2) passivation layer and a cobalt phosphate co-catalyst,the charge recombination at the photoanode-electrolyte interface is greatly suppressed to improve its overall PEC activity.As a result,the photocurrent density at 1.10 VRHE under 1 sun condition is enhanced from 0.22 mA cm^(-2) for an unmodified photoanode to 0.59 mA cm^(-2) for the fully modified photoanode,and the photocurrent onset potential is shifted cathodically by 400 mV.Moreover,the photoanode demonstrates outstanding stability by showing steady production of H_(2) and O_(2) gases in the stoichiometric ratio of 2:1 in a continuous PEC operation for 10 h.

Wrinkling and Growth Mechanism of CuO Nanowires in Thermal Oxidation of Copper Foil

We report a systematic study on wrinkling and CuO nanowires （NWs） growth in the thermal oxidation of copper foil. Copper foils with thickness of 0.5 mm were thermally oxidized in air at 500℃ for 0.5-10 h. It is found that all the samples have wrinkles and the size of the wrinkles increases with the oxidation time increasing. CuO NWs can grow on both the sidehill and hilltop of wrinkle. The CuO NWs on sidehill are longer and denser than those on hilltop. The growth direction of the CuO NWs on sidehill is not vertical to the substrate but vertical to their growth surfaces. The process of wrinkling and CuO NWs growth can be divided into three stages： undulating, voiding, and cracking. The CuO NWs on both sidehill and hilltop grow at the undulating stage. However, only the CuO NWs on sidehill grow and those on hilltop stop growing at the voiding and cracking stages because of the void in hilltop. The local electric field in a wrinkle at undulating stage was calculated, and it is found that the difference of local electric field strengths between hilltop and sidehill is small, which indicates that the predominant driving force for the diffusion of Cu ion during CuO NWs growth is internal stress.