Hydrothermal Systems Characterized by Crustal Thermally-dominated Structures of Southeastern China

Southeastern China(SE China)is located in the Pacific tectonic domain and has experienced a series of tectono-magmatic events induced by the subduction of the Paleo-Pacific Plate since the late Mesozoic.The subduction formed a series of NE-NNE oriented faults under a NW-SE regional stress field,along which a number of thermal springs occur.Previous studies have focused on the genesis mechanism of specific geothermal fields in SE China,but the general characteristics of hydrothermal systems in SE China remains unclear.In this study,we investigate the correlation between geothermal activity,hydrochemical type and regional faults by studying the distribution of hydrothermal activity and geochemical properties of typical hydrothermal systems in SE China.The hydrothermal systems in SE China have a crustal thermally-dominated structural origin unique to the specific geological and tectonic conditions of the Eurasian Plate margin.The upwelling of the asthenosphere and the widespread granitoids with high radiogenic heat production in SE China provide major heat sources for regional geothermal anomalies.The NE-oriented crustal thermally-dominated faults are critical for the formation of geothermal anomalies and NW-oriented extensional faults have created favorable conditions for meteoric water infiltration,transportation and the formation of thermal springs.

The role of temperature‐enhanced fault closure in promoting postinjection pressure diffusion and seismicity in enhanced geothermal systems

Post shut‐in seismic events in enhanced geothermal systems(EGSs)occur predominantly at the outer rim of the co‐injection seismic cloud.The concept of postinjection fracture and fault closure near the injection well has been proposed and validated as a mechanism for enhancing post shut‐in pressure diffusion that promotes seismic hazard.This phenomenon is primarily attributed to the poro‐elastic closure of fractures resulting from the reduction of wellbore pressure after injection termination.However,the thermal effects in EGSs,mainly including heat transfer and thermal stress,may not be trivial and their role in postinjection fault closure and pressure evolution needs to be explored.In this study,we performed numerical simulations to analyze the relative importance of poro‐elasticity,heat transfer,and thermo‐elasticity in promoting postinjection fault closure and pressure diffusion.The numerical model wasfirst validated against analytical solutions in terms offluid pressure diffusion and against heatedflow‐through experiments in terms of thermal processes.We then quantified and distinguished the contribution of each individual mechanism by comparing four different shut‐in scenarios simulated under different coupled conditions.Our results highlight the importance of poro‐elastic fault closure in promoting postinjection pressure buildup and seismicity,and suggest that heat transfer can further augment the fault closure‐induced pressure increase and thus potentially intensify the postinjection seismic hazard,with minimal contribution from thermo‐elasticity.

Suppression of oxygen and carbon impurity deposition in the thermal system of Czochralski monocrystalline silicon

When preparing large monocrystalline silicon materials,severe carbon etching and silicide deposition often occur to the thermal system.Therefore,a suppression method that optimizes the upper insulation structure has been proposed.Assisted by the finite element method,we calculated temperature distribution and carbon deposition of heater and heat shield,made the rule of silicide and temperature distributing in the system,and we explained the formation of impurity deposition.Our results show that the optimized thermal system reduces carbon etching loss on heat components.The lowered pressure of the furnace brings a rapid decrease of silicide deposition.The increase of the argon flow rate effectively inhibits CO and back diffusion.The simulated results agree well with the experiment observations,validating the effectiveness of the proposed method.

Energy and Life Cycle Assessment of Zinc/Water Nanofluid Based Photovoltaic Thermal System

Cooling the PV surface in a Photovoltaic Thermal system is a pivotal operational aspect to be taken into account to achieve optimized values of performance parameters in a Photovoltaic Thermal System.The experimental design used in this study facilitates the flow of varying concentrations of Zn-water nanofluid in serpentine copper tubing installed at the rear of the PV panel thereby preventing the PV surface temperature from increasing beyond the threshold value at which a decrease in electrical efficiency starts to occur.This fusion of solar thermal with PV devices leads to better electrical and thermal efficiency values resulting in decreased cell degradation over time and maximization of the lifespan of the PV module and the energy output from the PV system.Due to the superior thermal heat properties of nanofluids,their usage in such systems has become increasingly widespread.Life cycle metrics which include Energy Payback period,Energy Production Factor and life cycle conversion efficiency were evaluated for the PVT system by exhaustively chalking fundamental parameters such as embodied energy of the PVT setup and the total energy output from the PVT system.This research aims to be a major milestone in the evolutionary journey of Photovoltaic Thermal modules by guiding the engineers working on the theory,design and implementation of PVT systems towards its economic feasibility,environmental impact and energy sustainability.

Excel as an Educational Platform for Design Analyses of Fluid-Thermal Systems

Equipped with its Solver and-in and VBA, Microsoft Excel makes an ideal educational platform for design analyses of fluid-thermal systems. This paper illustrates this capability by considering a common type of these systems;which is the double-pipe heat exchanger. While Solver is used for the optimisation analysis, VBA is used for the development of a user-defined function (UDF) that determines the optimum standard-pipe size for the system.

Weatherability Studies on External Insulation Thermal System of Expanded Polystyrene Board,Polystyrene Granule and Polyurethane Foam

Atmospheric exposure tests including two experimental stages of high temperature-spraying water cycle and heating-refrigeration cycle were carried out on three currently used ETIS of expanded polystyrene（EPS） board,polystyrene granule mortar and polyurethane foam in order to study the weatherablility of external thermal insulation system（ETIS）.The change rules of adhesive strength were hereby studied at different time period of atmospheric exposure tests.The experimental results show that the adhesive strength of three kinds of ETIS changes a little during high temperature-spraying water cycle,but the adhesive strength of ETIS with EPS board decreases significantly after heating-refrigeration cycle.The lowering rate of adhesive strength with painting finishes is obviously faster than that of tile finishes for ETIS of EPS board during heating-refrigeration cycle.The weatherability of ETIS with EPS board is worse than the other two,and ETIS of polystyrene granule mortar and polyurethane foam are more suitable than ETIS of EPS board in cold area.

Geochemical assessment, mixing behavior and environmental impact of thermal waters in the Guelma geothermal system,Algeria

A study of thirteen geothermal springs located in the geothermal field of Guelma,northeastern Algeria,was conducted.Samples were collected during the period between January 2014 and February 2016.Geochemical processes responsible for the chemical composition of thermal and mineralized water were evaluated.The hydrochemical analysis shows that the thermal waters are characterized by the presence of two different chemical facies,the first type SO4-Ca in the east,west and south of Guelma,the second type HCO3-Ca in the south.This analysis also attributed to sodium,chlorides,and sulfates to an evaporitic terrigenous origin by the molar ratio Sr2+/Ca2+.The thermal spring waters from Guelma geothermal system have a meteoric origin,and all samples are immature with strong mixing between hot and shallow waters with 19-38.5%rate of mixing.The silica geothermometer shows that these thermal waters have a temperature varying from 84 to 122℃and that the water came from a depth of 2100-3000 m through a fault system that limits the pullapart basin of Guelma.Potential environmental effluent from thermal spas could pollute in both the irrigation and drinking waters,and which imposes danger on the health of the inhabitants of the region.

Multi-objective Optimization of Geothermal Extraction from the Enhanced Geothermal System in Qiabuqia Geothermal Field, Gonghe Basin

A geothermal demonstration exploitation area will be established in the Enhanced Geothermal System of the Qiabuqia field, Gonghe Basin, Qinghai–Xizang Plateau in China. Selection of operational parameters for geothermal field extraction is thus of great significance to realize the best production performance. A novel integrated method of finite element and multi-objective optimization has been employed to obtain the optimal scheme for thermal extraction from the Gonghe Basin. A thermal-hydraulic-mechanical coupling model(THM) is established to analyze the thermal performance. From this it has been found that there exists a contraction among different heat extraction indexes. Parametric study indicates that injection mass rate(Q_(in)) is the most sensitive parameter to the heat extraction, followed by well spacing(WS) and injection temperature(T_(in)). The least sensitive parameter is production pressure(p_(out)). The optimal combination of operational parameters acquired is such that(T_(in), p_(out), Q_(in), WS) equals(72.72°C, 30.56 MPa, 18.32 kg/s, 327.82 m). Results indicate that the maximum electrical power is 1.41 MW for the optimal case over 20 years. The thermal break has been relieved and the pressure difference reduced by 8 MPa compared with the base case. The optimal case would extract 50% more energy than that of a previous case and the outcome will provide a remarkable reference for the construction of Gonghe project.

Infrared Real-time Thermal System Based on DSP

An infrared real-time imaging system using DSP(digital signal processor) as the kernel of digital signal processing board is presented. In this system, the imaging difference and nonuniformity correction method is developed on the chip taking advantage of DSP with high speed. The method combines hardware and software together, so that the difficulty for realizing such a method with other hardware can be overcome.

Thermal stresses analysis of casing string used in enhanced geothermal systems wells

In the enhanced geothermal systems wells, casing temperature variation produces casing thermal stresses, resulting in casing uplift or bucking. When the induced thermal stresses exceed casing material's yield strength, the casing deforms and collapses. The traditional casing design standard only considers the influence of temperature variation on casing material's yield strength. Actually, for commonly used grades of steel pipe, casing's material properties-such as yield strength, coefficient of thermal expansion, and modulus of elasticity change with temperature variation. In this paper, the modified thermal stress equation is given. Examples show that the allowable temperature of the material grade N80's casing is only 164 ℃, which is much lower than that of the traditional design standard. The effective method to improve the casing pipe's allowable temperature is pre-stressed cementing technology. Pre-stressed cementing includes pre-tension stress cementing and pre-pressure stress cementing. This paper focuses on the design method of full casing pre-tension stress cementing and the ground anchor full casing string pre-tension cementing construction process.

Fast Calculation Method of Energy Flow for Combined Electro-Thermal System and Its Application

In recent years, Combined electro-thermal system has developed rapidly. In order to provide the initial data for the analysis of the combined electro-thermal system, a practical energy flow calculation method for the combined electro-thermal system is proposed in this paper. Based on the detailed analysis of the topology structure of the heating network and its hydraulic and thermodynamic model, the forward-backward sweep method for the heat flow of the heating network is established, which is more suitable for the actual radial heating network. The electric and thermal coupling model for heating source, such as thermoelectric unit and electric boiler is established, and the heat flow of heating network and the power flow of power grid are calculated orderly, thus a fast calculation method for the combined electro-thermal system is formed. What’s more, a combined electro-thermal system with two-stage peak-shaving electric boiler is used as the example system. This paper validates the effectiveness and rapidity of this method through the example system, and analyzes the influence for the energy flow of combined electro-thermal system caused by the operating parameters such as the installation location of electric boiler, the outlet water temperature of heat source and the outlet flow rate, etc.

Optimizing Power Plant Thermal System Design Using "Process Energy Integration" Method

The paper presents a renovation of thermal system design of a power and heat cogeneration device by utilizing the "Process Energy Integration Method". The new alternative obtains prominent energy saving result.

Solar Thermal Systems Performances versus Flat Plate Solar Collectors Connected in Series

This paper shows the modeling of a solar collective heating system in order to predict the system performances. Two systems are proposed: 1) the first, Solar Direct Hot Water, which is composed of flat plate collectors and thermal storage tank, 2) the second, a Solar Indirect Hot Water in which we added an external heat exchanger of constant effectiveness to the first system. The mass flow rate by a collector is fixed to 0.04 Kg·s–1 and the total number of collectors is adjusted to 60. For the first system, the maximum average water temperature within the tank in a typical day in summer and annual performances are calculated by varying the number of collectors connected in series. For the second, this paper shows the detailed analysis of water temperature within the storage and annual performances by varying the mass flow rate on the cold side of the heat exchanger and the number of collectors in series on the hot side. It is shown that the stratification within the storage is strongly influenced by mass flow rate and the connections between collectors. It is also demonstrated that the number of collectors that can be connected in series is limited. The optimization of the mass flow rate on cold side of the heat exchanger is seen to be an important factor for the energy saving.

Experimental test of a building thermal system for preventive maintenance based on thermoeconomic analysis

An analysis of the sectorial structure of energy consumption shows that residential and tertiary sector buildings are the third-highest consumers,responsible for 29.5%of a city’s final energy consumption.The Building Quality Control Laboratory of the Basque Government aims to promote quality,innovation,and sustainability in buildings.To accomplish this goal,it has constructed an experimental facility with different energy generation technologies and a very versatile control system for testing different energy systems and operation modes.In this study,we tested a facility for supplying domestic hot water and heating for a multi-family house by means of a condensing boiler and an aerothermal heat pump(together with the corresponding control).This installation could reproduce the thermal demands required to be satisfied by the generation equipment through a programmed operation of the installation based on real demands.Additionally,this installation was analyzed using thermoeconomics(TE)to solve problems unable to be solved using traditional energy analyses based on the First Law of Thermodynamics.These problems include:(1)Determining the costs of the products of the installation based on physical criteria,(2)detecting the places where losses actually occur,evaluating their costs,and proposing cost-effective improvements,and(3)diagnosing issues in the installation.As a result,this paper suggests a solution to the preventive maintenance problems confronting the technical maintenance personnel for thermal installations in buildings by applying TE knowledge and using real data collected from sensors.

Experimental evaluation of factors affecting performance of concentrating photovoltaic/thermal system integrated with phase‐change materials(PV/T‐CPCM)

The photovoltaic/thermal(PV/T)system is a promising option for countering energy shortages.To improve the performance of PV/T systems,compound parabolic concentrators(CPCs)and phase-change materials(PCMs)were jointly applied to construct a concentrating photovoltaic/thermal system integrated with phase-change materials(PV/T-CPCM).An open-air environment is used to analyze the effects of different parameters and the intermittent operation strategy on the system performance.The results indicate that the short-circuit current and open-circuit voltage are positively correlated with the solar irradiance,but the open-circuit voltage is negatively correlated with the temperature of the PV modules.When the solar irradiance is 500 W⋅m^(−2) and the temperature of the PV modules is 27.5℃,the short-circuit current and open-circuit voltage are 1.0 A and 44.5 V,respectively.Higher solar irradiance results in higher thermal power,whereas the thermal efficiency is under lower solar irradiance(136.2-167.1 W⋅m^(−2) is twice under higher solar irradiance(272.3-455.7 W⋅m^(−2))).In addition,a higher mass flow rate corresponds to a better cooling effect and greater pump energy consumption.When the mass flow rate increases from 0.01 to 0.02 kg⋅s^(-1),the temperature difference between the inlet and outlet decreases by 1.8℃,and the primary energy-saving efficiency decreases by 0.53%.The intermittent operation of a water pump can reduce the energy consumption of the system,and the combination of liquid cooling with PCMs provides better thermal regulation and energy-saving effects under various conditions.

Performance analysis of a photovoltaic/thermal system with lunar regolith-based thermal storage for the lunar base

Powering a moon base,especially keeping it warm during the long lunar night,is a big challenge.This paper introduces a photovoltaic/thermal(PV/T)system incorporating regolith thermal storage to solve the challenge of power and heat provision for the lunar base simultaneously.The vacuum of space around the moon helps this system by reducing heat loss.During the moon's daytime,the system not only generates electricity but also captures heat.This stored heat in the regolith is then used at night,reducing the amount of equipment we need to send from Earth.The spectrally selective PV/T panels are designed to absorb a wide range of sunlight(0.3–2.5μm)while minimizing heat loss in the infrared range(3–30μm).Simulation results of the hybrid solar energy system indicate the average value of the overall efficiency is 45.9%,which relatively elevates 56.1%compared to the PV system.The launch mass of the proposed PV/T system is only 8.4%of a traditional photovoltaic-lithium battery system with the same amount of energy storage.And the total specific energy of the proposed system is 7.3 kWh kg^(-1),while that of the photovoltaic-lithium battery system is about 0.3 kWh kg^(-1).In summary,this study proposes an alternative combined heat and electricity supply system for the lunar base,which can greatly reduce the launch mass and free up load for other scientific research equipment.

Bio-PCM Panels Composed of Renewable Materials Interact with Solar Heating Systems for Building Thermal Insulation

This article aims to present the feasibility of storing thermal energy in buildings for solar water heating while maintaining the comfort environment for residential buildings.Our contribution is the creation of insulating composite panels made of bio-based phase change materials(bio-PCM is all from coconut oil),cement and renewable materials(treated wood fiber and organic clay).The inclusion of wood fibers improved the thermal properties;a simple 2%increase of wood fiber decreased the heat conductivity by approximately 23.42%.The issues of bio-PCM leakage in the cement mortar and a roughly 56.5%reduction in thermal conductivity with bio-PCM stability in composite panels can be resolved by treating wood fibers with an adjuvant by impregnating them in bio-PCM in the presence of the treated clay generated.Clay and wood fiber were treated with adjuvants that are both biological and environmentally acceptable,as confirmed by FTIR spectroscopy.The heat transfer bench(DIDATEK)showed a decrease in thermal conductivity.By using differential scanning calorimetric(DSC)analysis,the investigation of thermal stability and enthalpy during two heating cycles of pure bio-PCM and composite bio-PCM was validated.The novel renewable material was used to create composite panels for the trial prototype,which took the shape of a component attached to the solar heating system,33.57%less heat was lost,according to the heat transfer research.The outcomes demonstrated the possibility of replacing traditional electric water heating in residential buildings with solar water heating systems.

Phonon resonance modulation in weak van der Waals heterostructures:Controlling thermal transport in graphene-silicon nanoparticle systems

The drive for efficient thermal management has intensified with the miniaturization of electronic devices.This study explores the modulation of phonon transport within graphene by introducing silicon nanoparticles influenced by van der Waals forces.Our approach involves the application of non-equilibrium molecular dynamics to assess thermal conductivity while varying the interaction strength,leading to a noteworthy reduction in thermal conductivity.Furthermore,we observe a distinct attenuation in length-dependent behavior within the graphene-nanoparticles system.Our exploration combines wave packet simulations with phonon transmission calculations,aligning with a comprehensive analysis of the phonon transport regime to unveil the underlying physical mechanisms at play.Lastly,we conduct transient molecular dynamics simulations to investigate interfacial thermal conductance between the nanoparticles and the graphene,revealing an enhanced thermal boundary conductance.This research not only contributes to our understanding of phonon transport but also opens a new degree of freedom for utilizing van der Waals nanoparticle-induced resonance,offering promising avenues for the modulation of thermal properties in advanced materials and enhancing their performance in various technological applications.

Design and analysis of an advanced thermal management system for the solar close observations and proximity experiments spacecraft

In this paper,the mission and the thermal environment of the Solar Close Observations and Proximity Experiments(SCOPE)spacecraft are analyzed,and an advanced thermal management system(ATMS)is designed for it.The relationship and functions of the integrated database,the intelligent thermal control system and the efficient liquid cooling system in the ATMS are elaborated upon.For the complex thermal field regulation system and extreme space thermal environment,a modular simulation and thermal field planning method are proposed,and the feasibility of the planning algorithm is verified by numerical simulation.A solar array liquid cooling system is developed,and the system simulation results indicate that the temperatures of the solar arrays meet the requirements as the spacecraft flies by perihelion and aphelion.The advanced thermal management study supports the development of the SCOPE program and provides a reference for the thermal management in other deep-space exploration programs.