A higher-order porous thermoelastic problem with microtemperatures

In this paper,we study a porous thermoelastic problem with microtemperatures assuming parabolic higher order in time derivatives for the thermal variables.The model is derived and written as a coupled linear system.Then,a uniqueness result is proved by using the logarithmic convexity method in the case that we do not assume that the mechanical energy is positive definite.Finally,the existence of the solution is obtained by introducing an energy function and applying the theory of linear semigroups.

A novel electron-phonon coupling thermoelasticity with Burgers electronic heat transfer

The electron-phonon interaction can reveal the microscopic mechanism of heat transfer in metals.The two-step heat conduction considering electron-phonon interaction has become an effective theoretical model for extreme environments,such as micro-scale and ultrafast processes.In this work,the two-step heat transfer model is further extended by considering the Burgers heat conduction model with the secondorder heat flux rate for electrons.Then,a novel generalized electron-phonon coupling thermoelasticity is proposed with the Burgers electronic heat transfer.Then,the problem of one-dimensional semi-infinite copper strip subject to a thermal shock at one side is studied by the Burgers two-step(BTS)model.The thermoelastic analytical solutions are systematically derived in the Laplace domain,and the numerical Laplace inversion method is adopted to obtain the transient responses.The new model is compared with the parabolic two-step(PTS)model and the hyperbolic two-step(HTS)model.The results show that in ultrafast heating,the BTS model has the same wave front jump as the HTS model.The present model has the faster wave speed,and predicts the bigger disturbed regions than the HTS model.More deeply,all two-step models also have the faster wave speeds than one-step models.This work may benefit the theoretical modeling of ultrafast heating of metals.

Isomorphism Continuum Stored Energy Functional for Finite Thermoelastic Deformation

Continuum mechanics for isotropic finite thermoelastic deformations have been reviewed. Thermal effects on mechanical responses of rubbers have been captured by the isomorphism continuum stored energy (CSE) functional with the multiplicative decomposition of deformation gradient while preserving the structure of symmetry for finite structural deformation. The CSE finite thermoelastic model fits and predicts experimental data of SR and NR-C60 rubbers at different external temperatures. For internal temperature effects of both NR and NR-SIC rubbers, the CSE finite thermoelastic model of stored energy and entropy, along with the newly developed CTE and CI models, fits both nominal stress-stretch and temperature change-stretch experimental data in uniaxial extension tests.

DEPENDENCE OF MODULUS OF ELASTICITY AND THERMAL CONDUCTIVITY ON REFERENCE TEMPERATURE IN GENERALIZED THERMOELASTICITY FOR AN INFINITE MATERIAL WITH A SPHERICAL CAVITY

The equations of generalized thermoelasticity with one relaxation time with variable modulus of elasticity and the thermal conductivity were used to solve a problem of an infinite material with a spherical cavity.The inner surface of the cavity was taken to be traction free and acted upon by a thermal shock to the surface. Laplace transforms techniques were used to obtain the solution by a direct approach.The inverse Laplace transforms was obtained numerically.The temperature,displacement and stress distributions are represented graphically.

Two-dimensional interactions due to moving load in generalized thermoelastic solid with diffusion

The present paper is concerned with the investigation of disturbances in＇a homogeneous, isotropic elastic medium with generalized thermoelastic diffusion, when a moving source is acting along one of the co-ordinate axis on the boundary of the medium. Eigen value approach is applied to study the disturbance in Laplace-Fourier transform domain for a two dimensional problem. The analytical expressions for displacement components, stresses, temperature field, concentration and chemical potential are obtained in the physical domain by using a numerical technique for the inversion of Laplace transform based on Fourier expansion techniques. These expressions are calculated numerically for a copper like material and depicted graphically. As special cases, the results in generalized thermoelastic and elastic media are obtained. Effect of presence of diffusion is analyzed theoretically and numerically.

Effect of rotation in generalized thermoelastic solid under the influence of gravity with an overlying infinite thermoelastic fluid

The present problem is concerned with the study of deformation of a rotating generalized thermoelastic solid with an overlying infinite thermoelastic fluid due to different forces acting along the interface under the influence of gravity.The components of displacement,force stress,and temperature distribution are first obtained in Laplace and Fourier domains by applying integral transforms,and then obtained in the physical domain by applying a numerical inversion method.Some particular cases are also discussed in the context of the problem.The results are also presented graphically to show the effect of rotation and gravity in the medium.

Axisymmetric free vibrations of infinite micropolar thermoelastic plate

The propagation of axisymmetric free vibrations in an infinite homogeneous isotropic micropolar thermoelastic plate without energy dissipation subjected to stress free and rigidly fixed boundary conditions is investigated. The secular equations for homogeneous isotropic micropolar thermoelastic plate without energy dissipation in closed form for symmetric and skew symmetric wave modes of propagation are derived. The different regions of secular equations are obtained. At short wavelength limits, the secular equations for symmetric and skew symmetric modes of wave propagation in a stress free insulated and isothermal plate reduce to Rayleigh surface wave frequency equation. The results for thermoelastic, micropolar elastic and elastic materials are obtained as particular cases from the derived secular equations. The amplitudes of displacement components, microrotation and temperature distribution are also computed during the symmetric and skew symmetric motion of the plate. The dispersion curves for symmetric and skew symmetric modes and amplitudes of displacement components, microrotation and temperature distribution in case of fundamental symmetric and skew symmetric modes are presented graphically. The analytical and numerical results are found to be in close agreement.

THERMOELASTIC PROBLEMS IN THE HALF SPACE—AN APPLICATION OF THE GENERAL SOLUTION IN ELASTICITY

In this paper, some thermoelastic problems in the half space are studied by using the general solutions of the elastic equations. The method presented here is extremely effective for the axisymmetric problems of the half space as well as the half plane problems.

A GENERAL SOLUTION FOR STATIC PIEZOTHERMOELASTIC PROBLEMS OF CRYSTAL CLASS 6mm SOLIDS

In this paper, a general solution for three-dimensional staticpiezothermoleastic prob- lems of crystal class 6mm solids ispresented. The general solution involves four piezoelastic potentialfunctions and a piezothermoelastic potential function, of which fourpiezoelastic potential functions are governed by weighted harmonicdifferential equations. Compared with the general solution given byAshida et al., in which seven potential functions are introduced, thegeneral solution proposed in the Present paper is more rigorouslyderived.

MULTI-SCALE FE COMPUTATION FOR THE STRUCTURES OF COMPOSITE MATERIALS WITH SMALL PERIODIC CONFIGURATION UNDER CONDITION OF COUPLED THERMOELASTICITY

In this paper,the multi-scale computational method for a structure of composite materials with a small periodic configuration under the coupled thermoelasticity condition is presented. The two-scale asymptotic(TSA)expression of the displacement and the increment of temperature for composite materials with a small periodic configuration under the condition of thermoelasticity are briefly shown at first,then the multi-scale finite element algorithms based on TSA are discussed.Finally the numerical results evaluated by the multi-scale computational method are shown.It demonstrates that the basic configuration and the increment of temperature strongly influence the local strains and local stresses inside a basic cell.

Uniqueness,reciprocity theorem,and plane waves in thermoelastic diffusion with a fractional order derivative

In this work, a theory of thermoelasticity with diffusion is taken into consideration by using the methodology of fractional calculus. The governing equations for particle motion in a homogeneous anisotropic fractional order generalized thermoelastic diffusive medium are presented. Uniqueness and reciprocity theorems are proved. The plane wave propagation in the homogeneous transversely isotropic thermoelastic diffusive medium with fractional order derivative is studied. For the two-dimensional problem, there exist a quasi-longitudinal wave, a quasi-transverse wave, a quasi-mass diffusion wave, and a quasi-thermal wave. From the obtained results, the different characteristics of waves, like phase velocity, attenuation coefficient, specific loss, and penetration depth, are computed numerically and presented graphically. Some special cases are also discussed.

The effect of fractional thermoelasticity on a two-dimensional problem of a mode I crack in a rotating fiber-reinforced thermoelastic medium

This article is concerned with the effect of rotation on the general model of the equations of the generalized thermoe- lasticity for a homogeneous isotropic elastic half-space solid, whose surface is subjected to a Mode-I crack problem. The fractional order theory of thermoelasticity is used to obtain the analytical solutions for displacement components, force stresses, and temperature. The boundary of the crack is subjected to a prescribed stress distribution and temperature. The normal mode analysis technique is used to solve the resulting non-dimensional coupled governing equations of the problem. The variations of the considered variables with the horizontal distance are illustrated graphically. Some particular cases are also discussed in the context of the problem. Effects of the fractional parameter, reinforcement, and rotation on the varia- tions of different field quantities inside the elastic medium are analyzed graphically. Comparisons are made between the results in the presence and those in the absence of fiber-reinforcing, rotating and fractional parameters.

Nonlocal thermoelastic analysis of a functionally graded material microbeam

In extreme heat transfer environments, functionally graded materials(FGMs)have aroused great concern due to the excellent thermal shock resistance. With the development of micro-scale devices, the size-dependent effect has become an important issue. However, the classical continuum mechanical model fails on the micro-scale due to the influence of the size-dependent effect. Meanwhile, for thermoelastic behaviors limited to small-scale problems, Fourier's heat conduction law cannot explain the thermal wave effect. In order to capture the size-dependent effect and the thermal wave effect, the nonlocal generalized thermoelastic theory for the formulation of an FGM microbeam is adopted in the present work. For numerical validation, the transient responses for a simply supported FGM microbeam heated by the ramp-type heating are considered.The governing equations are formulated and solved by employing the Laplace transform techniques. In the numerical results, the effects of the ramp-heating time parameter, the nonlocal parameter, and the power-law index on the considered physical quantities are presented and discussed in detail.

Propagation of waves in an electro-microstretch generalized thermoelastic semi-space

The present investigation is concerned with wave propagation in an electro-microstretch generalized thermoelastic solid half space. Two different cases have been discussed： （i） reflection of plane wave at the free surface of an electro-microstretch generalized thermoelastic solid; and （ii） propagation of Rayleigh waves in an electro-microstretch generalized thermoelastic solid half space. In case （i）, the amplitude ratios of the various reflected waves have been computed numerically and depicted graphically against angle of incidence. In case （ii）, the frequency equation is derived and dispersion curves giving phase velocity and attenuation coefficient as a function of wave number, have been plot- ted graphically for a specific model. Some special cases of interest are also deduced, for both the cases.

Generalized thermoelastic interaction in functional graded material with fractional order three-phase lag heat transfer

The present work is concerned with the solution of a problem on thermoelastic interactions in a functional graded material due to thermal shock in the context of the fractional order three-phase lag model. The governing equations of fractional order generalized thermoelasticity with three-phase lag model for functionally graded materials(FGM)(i.e., material with spatially varying material properties) are established. The analytical solution in the transform domain is obtained by using the eigenvalue approach.The inversion of Laplace transform is done numerically. The graphical results indicate that the fractional parameter has significant effects on all the physical quantities. Thus, we can consider the theory of fractional order generalized thermoelasticity an improvement on studying elastic materials.

Propagation of a Thermoelastic Wave in a Half-Space of a Homogeneous Isotropic Material Subjected to the Effect of Rotation and Initial Stress

The propagation of thermoelastic waves in a homogeneous,isotropic elastic semi-infinite space is subjected to rotation and initial stress,which is at temperature T_(0)-initially,and whose boundary surface is subjected to heat source and load moving with finite velocity.Temperature and stress distribution occurring due to heating or cooling and have been determined using certain boundary conditions.Numerical results have been given and illustrated graphically in each case considered.Comparison is made with the results predicted by the theory of thermoelasticity in the absence of rotation and initial stress.The results indicate that the effect of the rotation and initial stress is very pronounced.

ON THE STABILIZATION OF THERMOELASTIC MARTENSITE IN A Cu-Zn-Al ALLOY

The stabilization of thermoelastic martensite in a rapidly solidified Cu-Zn-A1 alloy is be- lieved to be the process of disordering in atomic configuration during which the structure of martensite gradually transforms into N9R(b/a=1/3^(1/2))from M18R.This is dependent upon the intrinsic decomposition tendency of the martensite.

Thermoelastic analysis of multiple defects with the extended finite element method

In this paper, the extended finite element method (XFEM) is adopted to analyze the interaction between a single macroscopic inclusion and a single macroscopic crack as well as that between multiple macroscopic or microscopic defects under thermal/mechanical load. The effects of different shapes of multiple inclusions on the material thermomechanical response are investigated, and the level set method is coupled with XFEM to analyze the interaction of multiple defects. Further, the discretized extended finite element approximations in relation to thermoelastic problems of multiple defects under displacement or temperature field are given. Also, the interfaces of cracks or materials are represented by level set functions, which allow the mesh assignment not to conform to crack or material interfaces. Moreover, stress intensity factors of cracks are obtained by the interaction integral method or the M-integral method, and the stress/strain/stiffness fields are simulated in the case of multiple cracks or multiple inclusions. Finally, some numerical examples are provided to demonstrate the accuracy of our proposed method.

Reflection of PlaneWaves from Electro-magneto-thermoelastic Half-space with a Dual-Phase-Lag Model

The aim of this paper is to study the reflection of plane harmonic waves from a semi-infinite elastic solid under the effect of magnetic field in a vacuum.The expressions for the reflection coefficients,which are the relations of the amplitudes of the reflected waves to the amplitude of the incident waves,are obtained.Similarly,the reflection coefficient ratio variations with the angle of incident under different conditions are shown graphically.Comparisons are made with the results predicted by the dual-phase-lag model and Lord-Shulman theory in the presence and absence of magnetic field.

Thermoelastic stress analysis of multilayered films in a micro-thermoelectric cooling device

This paper presents an analytical solution for the thermoelastic stress in a typical in-plane＇s thin-film micro- thermoelectric cooling device under different operating con- ditions. The distributions of the permissible temperature fields in multilayered thin-films are analytically obtained, and the characteristics, including maximum temperature dif- ference and maximum refrigerating output of the thermo- electric device, are discussed for two operating conditions. Analytical expressions of the thermoelastic stresses in the layered thermoelectric thin-films induced by the tempera- ture difference are formulated based on the theory of mul- tilayer system. The results demonstrate that, the geometric dimension is a significant factor which remarkably affects the thermoelastic stresses. The stress distributions in layers of semiconductor thermoelements, insulating and support- ing membrane show distinctly different features. The present work may profitably guide the optimization design of high- efficiency micro-thermoelectric cooling devices.