The modern trend of increasing the number of pigs at production sites led to a noticeable surplus of manure. Separation of manure solids provides an avenue of their utility via thermochemical conversion techniques. Th...The modern trend of increasing the number of pigs at production sites led to a noticeable surplus of manure. Separation of manure solids provides an avenue of their utility via thermochemical conversion techniques. Therefore, the goal of this paper was to assess the physical and thermal properties of solid separated swine manure obtained from two different farms, i.e., farrowing, and growing-finishing, and to determine their pyrolysis kinetic parameters. Swine manure solids were dried and milled prior to assessing their properties. Differential and integral isoconversional methods (Friedman, and Flynn-Wall-Ozawa) were used to determine the apparent activation energy as a function of the conversion ratio. Significant differences were observed in the proximate, ultimate composition between both manure types. The higher heating value (HHV) for the manure solids from farrowing, and growing-finishing farms reached 16.6 MJ/kg and 19.4 MJ/kg, respectively. The apparent activation energy computed using Friedman and FWO methods increased with the increase in the degree of conversion. Between 10% and 40% degrees of conversion, the average activation energies, using Friedman method, were103 and 116 kJ/mol for the farrowing and growing-finishing manure solids, respectively. On the other hand, the same activation energies, calculated from FWO method, were 98 and 104 kJ/mol, for solid manure obtained from farrowing and growing-finishing farms, respectively. The findings in this study will assist in the effort to optimize thermochemical conversion processes to accommodate swine waste. This could, in turn, minimize swine production impacts on the surrounding ecologies and provide sustainable energy and biochar streams.展开更多
Biomass is a kind of renewable energy which is used increasingly in different types of combustion systems or in the production of fuels like bio-oil. Lycopodium is a cellulosic particle, with good combustion propertie...Biomass is a kind of renewable energy which is used increasingly in different types of combustion systems or in the production of fuels like bio-oil. Lycopodium is a cellulosic particle, with good combustion properties, of which microscopic images show that these particles have spherical shapes with identical diameters of 31 μm. The measured density of these particles is 1.0779 g/cm2. Lycopodium particles contain 64.06% carbon, 25.56% oxygen, 8.55% hydrogen and 1.83% nitrogen, and no sulfur. Thermogravimetric analysis in the nitrogen environment indicates that the maximum of particle mass reduction occurs in the temperature range of 250-550 ℃ where the maximum mass reduction in the DTG diagrams also occurs in. In the oxygen environment, an additional peak can also be observed in the temperature range of 500-600 ℃, which points to solid phase combustion and ignition temperature of lycopodium particles. The kinetics of reactions is determined by curve fitting and minimization of error.展开更多
A critical examination was made on the reliability of kinetic parameters of nonisothermal thermoanalytical rate measurement by the widely applied Coats-Redfern(CR)equation.For this purpose,simulated TGA curves were ma...A critical examination was made on the reliability of kinetic parameters of nonisothermal thermoanalytical rate measurement by the widely applied Coats-Redfern(CR)equation.For this purpose,simulated TGA curves were made for reactions with different kinetic models,including chemical,diffusion(Janders)and mixed mechanism at different heating rates.The results show that,for reactions controlled kinetically by one mechanism,all solid state reaction models show linear trends by use of CR method and this method can not distinct the correct reaction model.For reactions with mixed mechanism,the CR method shows nonlinear trends and the reaction models and kinetic parameters can not be extracted from CR curves.The overall conclusion from this comparative appraisal of the characteristics of the CR approach to kinetic analysis of TGA data is that the CR approach is generally unsuitable for determination of kinetic parameters.展开更多
Oxygen uncoupling characteristics of a natural manganese ore and a perovskitetype oxide CaMn_(0.5)Ti0_(37)5Fe_(0.125)O_(3)were studied by using a microfluidized bed thermogravimetric analysis(MFBTGA)technology which i...Oxygen uncoupling characteristics of a natural manganese ore and a perovskitetype oxide CaMn_(0.5)Ti0_(37)5Fe_(0.125)O_(3)were studied by using a microfluidized bed thermogravimetric analysis(MFBTGA)technology which is based on a realtime mass measurement of fluidizing particles inside a bubbling bed reactor.The chemical stability,kinetics of the oxygen release and uptake reactions and fluidization property were investigated and the experimental data measured by MFBTGA were compared with the results in a regular TGA instrument(TGA Q500).The regular TGA Q500 results show the reactivity of both the manganese ore and perovskite oxide are stable for multi cycles,and the oxygen uncoupling capacity of the manganese ore is~1.2%(mass)which is~2 times higher than that of the perovskite oxide.However,the experimental results from the MFBTGA indicated that there is a serious agglomeration for the manganese ore.A very important finding is that the reaction rate of oxygen release and oxygen uptake of the perovskite oxide measured by the MFBTGA are~2 and~4 times faster than that of testedby the TGA Q500.We can conclude that MFBTGA is a very useful tool to measure the reactivity stability and kinetics of oxygen carriers in highthroughput analysis instead of the regular TGA.展开更多
The main components and pyrolysis characteristics of Camellia oleifera Abel hells, Castanea mollissima Blume shells, and Castanea mollissima Blume shells were analyzed by using FTIR and thermogravimetric methods. The ...The main components and pyrolysis characteristics of Camellia oleifera Abel hells, Castanea mollissima Blume shells, and Castanea mollissima Blume shells were analyzed by using FTIR and thermogravimetric methods. The experimental results indicated that the main components of the three kinds of raw materials consisted of cellulose, hemicellulose, and lignin. The highest contents of hemicellulose, cellulose, and lignin were in Camellia oleiferaAbel shells (49.34% ± 0.07%), Castanea mollissima Blume shells (27.34% ± 0.01%), and Carya cathayensis Sarg shells (49.78% ± 0.01%), respectively. The pyrolysis processes of three kinds of shells generally included three stages, namely dehydration, pyrolysis, and carbonization. The peak values and the appearance times of their pyrolysis rates were closely related to their compositions.展开更多
Residual moisture is a key quality control parameter for lyophilized biologicals, as high moisture can correlate with poor stability. Coulometric Karl Fischer titration is the most widely used technology to determine ...Residual moisture is a key quality control parameter for lyophilized biologicals, as high moisture can correlate with poor stability. Coulometric Karl Fischer titration is the most widely used technology to determine residual water content;some chemicals are known to cause problems with Karl Fischer titration, but these chemicals do not usually occur in biologics. Three biological samples, of fibrinogen, heparin and Haemophilus influenza b polysaccharide, have caused particular issue in our hands by routine Karl Fischer analysis, illustrating different limitations with this method. The use of thermogravimetric analysis, with evolved gas mass spectrometric monitoring, is described here as a successful alternative for moisture analysis in these materials.展开更多
From the environmental consideration,it would be very interesting to use natural fibers such as banana,jute or coir as reinforcement materials instead of artificial fibers or any kind of synthetic materials.Natural fi...From the environmental consideration,it would be very interesting to use natural fibers such as banana,jute or coir as reinforcement materials instead of artificial fibers or any kind of synthetic materials.Natural fibers have many advantages over synthetic ones.Polypropylene banana fiber composites(PPBC)are prepared using untreated and alkali-treated banana fibers at 10-25%by weight of the fiber loading.The thermal properties of polypropylene natural fiber composites are very important for technological uses.Thermogravimetric measurements show that the incorporation of banana fiber into PP enhances the thermal stability of composites containing treated fibers,in comparison with untreated fibers.A composite of biodegradable polypropylene(PP)reinforced with short banana natural fibers was prepared by melt blending followed by a hot press molding system.The thermal properties of matrix materials were studied using thermogravimetric analyzers TGA units.It is observed that the introduction of short banana fibers slightly improved the thermo oxidative stability of PP-banana composites.Physical and chemical changes occurred through dehydration,phase transition,molecular orientation,crystallinity disruption,oxidation and decomposition,and incorporation of several functional groups.Systematic investigations of the thermal behavior of polymers in gas,vacuum or inert atmosphere give the knowledge of how change takes place in polymers.To understand such changes thermogravimetric analysis(TGA)and thermal analysis(TG)were performed.It is observed reinforcement of short banana fiber leads to little improvement in the thermooxidative stability of PPBC.Due to the enhancement of thermo-mechanical properties,such composites may be used as building materials namely roof materials,selling materials and many other engineering applications.展开更多
This paper presents the results of the characterization by thermogravimetric analysis of a new composite material called polymeric concrete. The polymeric concrete contains micro-particles obtained from High Density P...This paper presents the results of the characterization by thermogravimetric analysis of a new composite material called polymeric concrete. The polymeric concrete contains micro-particles obtained from High Density Poly-Ethylene (HDPE) mechanically recycled (post-consumer bottles);the official Mexican standard NMX-E-232-SCFI-1999 considers the HDPE as the recyclable plastic material. Thermo-grams based on weight lost were obtained from the raw material (HDPE) and the polymer concrete in order to obtain the glass transition temperature (Tg) and melting temperature (Tf). The analysis conditions were defined from 20°C to 180°C and the heat rate of 1°C/minute. The results show that the glass transition temperature of polymeric concrete is 46°C and the HDPE is 38°C. These results mean that the polymeric concrete is more resistant to decomposition. With respect to the melting temperature, the results show that the 2°C difference between polymeric concrete and HDPE is not significant. The polymeric concrete with HDPE recycled can be considered as composite material thermoplastic. The new material melts when it is heated to 146°C and has the ability to be softened, processed and reprocessed with temperature and pressure changes, which make it possible to obtain molded pieces in the desired shape.展开更多
\ According to the analysis of the residual products by thermogravimetric analysis (TGA), the thermal decomposition process of cefazolin sodium (CEZ·Na) was thought to be similar to the degradation in solid sta...\ According to the analysis of the residual products by thermogravimetric analysis (TGA), the thermal decomposition process of cefazolin sodium (CEZ·Na) was thought to be similar to the degradation in solid state in its storage time. This laid a foundation for estimating the relative chemical stability of the drug by determination of its decomposition kinetics using TGA. Although the observed thermal decomposition kinetics of CEZ·Na was complex, a conversion level of 1% was chosen for evaluation of the stability of CEZ·Na crystalline since the mechanism here was more likely to be that of the actual product failure. The evaluation results suggested that the α form of CEZ·Na had the best stability and the amorphous one was the least stable one among α form, dehydrated α form and amorphous form.展开更多
文摘The modern trend of increasing the number of pigs at production sites led to a noticeable surplus of manure. Separation of manure solids provides an avenue of their utility via thermochemical conversion techniques. Therefore, the goal of this paper was to assess the physical and thermal properties of solid separated swine manure obtained from two different farms, i.e., farrowing, and growing-finishing, and to determine their pyrolysis kinetic parameters. Swine manure solids were dried and milled prior to assessing their properties. Differential and integral isoconversional methods (Friedman, and Flynn-Wall-Ozawa) were used to determine the apparent activation energy as a function of the conversion ratio. Significant differences were observed in the proximate, ultimate composition between both manure types. The higher heating value (HHV) for the manure solids from farrowing, and growing-finishing farms reached 16.6 MJ/kg and 19.4 MJ/kg, respectively. The apparent activation energy computed using Friedman and FWO methods increased with the increase in the degree of conversion. Between 10% and 40% degrees of conversion, the average activation energies, using Friedman method, were103 and 116 kJ/mol for the farrowing and growing-finishing manure solids, respectively. On the other hand, the same activation energies, calculated from FWO method, were 98 and 104 kJ/mol, for solid manure obtained from farrowing and growing-finishing farms, respectively. The findings in this study will assist in the effort to optimize thermochemical conversion processes to accommodate swine waste. This could, in turn, minimize swine production impacts on the surrounding ecologies and provide sustainable energy and biochar streams.
基金supported by the Ministry of Science, Research & Technology of Iran
文摘Biomass is a kind of renewable energy which is used increasingly in different types of combustion systems or in the production of fuels like bio-oil. Lycopodium is a cellulosic particle, with good combustion properties, of which microscopic images show that these particles have spherical shapes with identical diameters of 31 μm. The measured density of these particles is 1.0779 g/cm2. Lycopodium particles contain 64.06% carbon, 25.56% oxygen, 8.55% hydrogen and 1.83% nitrogen, and no sulfur. Thermogravimetric analysis in the nitrogen environment indicates that the maximum of particle mass reduction occurs in the temperature range of 250-550 ℃ where the maximum mass reduction in the DTG diagrams also occurs in. In the oxygen environment, an additional peak can also be observed in the temperature range of 500-600 ℃, which points to solid phase combustion and ignition temperature of lycopodium particles. The kinetics of reactions is determined by curve fitting and minimization of error.
文摘A critical examination was made on the reliability of kinetic parameters of nonisothermal thermoanalytical rate measurement by the widely applied Coats-Redfern(CR)equation.For this purpose,simulated TGA curves were made for reactions with different kinetic models,including chemical,diffusion(Janders)and mixed mechanism at different heating rates.The results show that,for reactions controlled kinetically by one mechanism,all solid state reaction models show linear trends by use of CR method and this method can not distinct the correct reaction model.For reactions with mixed mechanism,the CR method shows nonlinear trends and the reaction models and kinetic parameters can not be extracted from CR curves.The overall conclusion from this comparative appraisal of the characteristics of the CR approach to kinetic analysis of TGA data is that the CR approach is generally unsuitable for determination of kinetic parameters.
基金The research has received funding from the National Natural Science Foundation of China(51976102)the National Key Research and Development Plan of China(2016YFB0600802-A and No.2017YFE0112500).
文摘Oxygen uncoupling characteristics of a natural manganese ore and a perovskitetype oxide CaMn_(0.5)Ti0_(37)5Fe_(0.125)O_(3)were studied by using a microfluidized bed thermogravimetric analysis(MFBTGA)technology which is based on a realtime mass measurement of fluidizing particles inside a bubbling bed reactor.The chemical stability,kinetics of the oxygen release and uptake reactions and fluidization property were investigated and the experimental data measured by MFBTGA were compared with the results in a regular TGA instrument(TGA Q500).The regular TGA Q500 results show the reactivity of both the manganese ore and perovskite oxide are stable for multi cycles,and the oxygen uncoupling capacity of the manganese ore is~1.2%(mass)which is~2 times higher than that of the perovskite oxide.However,the experimental results from the MFBTGA indicated that there is a serious agglomeration for the manganese ore.A very important finding is that the reaction rate of oxygen release and oxygen uptake of the perovskite oxide measured by the MFBTGA are~2 and~4 times faster than that of testedby the TGA Q500.We can conclude that MFBTGA is a very useful tool to measure the reactivity stability and kinetics of oxygen carriers in highthroughput analysis instead of the regular TGA.
文摘The main components and pyrolysis characteristics of Camellia oleifera Abel hells, Castanea mollissima Blume shells, and Castanea mollissima Blume shells were analyzed by using FTIR and thermogravimetric methods. The experimental results indicated that the main components of the three kinds of raw materials consisted of cellulose, hemicellulose, and lignin. The highest contents of hemicellulose, cellulose, and lignin were in Camellia oleiferaAbel shells (49.34% ± 0.07%), Castanea mollissima Blume shells (27.34% ± 0.01%), and Carya cathayensis Sarg shells (49.78% ± 0.01%), respectively. The pyrolysis processes of three kinds of shells generally included three stages, namely dehydration, pyrolysis, and carbonization. The peak values and the appearance times of their pyrolysis rates were closely related to their compositions.
文摘Residual moisture is a key quality control parameter for lyophilized biologicals, as high moisture can correlate with poor stability. Coulometric Karl Fischer titration is the most widely used technology to determine residual water content;some chemicals are known to cause problems with Karl Fischer titration, but these chemicals do not usually occur in biologics. Three biological samples, of fibrinogen, heparin and Haemophilus influenza b polysaccharide, have caused particular issue in our hands by routine Karl Fischer analysis, illustrating different limitations with this method. The use of thermogravimetric analysis, with evolved gas mass spectrometric monitoring, is described here as a successful alternative for moisture analysis in these materials.
文摘From the environmental consideration,it would be very interesting to use natural fibers such as banana,jute or coir as reinforcement materials instead of artificial fibers or any kind of synthetic materials.Natural fibers have many advantages over synthetic ones.Polypropylene banana fiber composites(PPBC)are prepared using untreated and alkali-treated banana fibers at 10-25%by weight of the fiber loading.The thermal properties of polypropylene natural fiber composites are very important for technological uses.Thermogravimetric measurements show that the incorporation of banana fiber into PP enhances the thermal stability of composites containing treated fibers,in comparison with untreated fibers.A composite of biodegradable polypropylene(PP)reinforced with short banana natural fibers was prepared by melt blending followed by a hot press molding system.The thermal properties of matrix materials were studied using thermogravimetric analyzers TGA units.It is observed that the introduction of short banana fibers slightly improved the thermo oxidative stability of PP-banana composites.Physical and chemical changes occurred through dehydration,phase transition,molecular orientation,crystallinity disruption,oxidation and decomposition,and incorporation of several functional groups.Systematic investigations of the thermal behavior of polymers in gas,vacuum or inert atmosphere give the knowledge of how change takes place in polymers.To understand such changes thermogravimetric analysis(TGA)and thermal analysis(TG)were performed.It is observed reinforcement of short banana fiber leads to little improvement in the thermooxidative stability of PPBC.Due to the enhancement of thermo-mechanical properties,such composites may be used as building materials namely roof materials,selling materials and many other engineering applications.
文摘This paper presents the results of the characterization by thermogravimetric analysis of a new composite material called polymeric concrete. The polymeric concrete contains micro-particles obtained from High Density Poly-Ethylene (HDPE) mechanically recycled (post-consumer bottles);the official Mexican standard NMX-E-232-SCFI-1999 considers the HDPE as the recyclable plastic material. Thermo-grams based on weight lost were obtained from the raw material (HDPE) and the polymer concrete in order to obtain the glass transition temperature (Tg) and melting temperature (Tf). The analysis conditions were defined from 20°C to 180°C and the heat rate of 1°C/minute. The results show that the glass transition temperature of polymeric concrete is 46°C and the HDPE is 38°C. These results mean that the polymeric concrete is more resistant to decomposition. With respect to the melting temperature, the results show that the 2°C difference between polymeric concrete and HDPE is not significant. The polymeric concrete with HDPE recycled can be considered as composite material thermoplastic. The new material melts when it is heated to 146°C and has the ability to be softened, processed and reprocessed with temperature and pressure changes, which make it possible to obtain molded pieces in the desired shape.
文摘\ According to the analysis of the residual products by thermogravimetric analysis (TGA), the thermal decomposition process of cefazolin sodium (CEZ·Na) was thought to be similar to the degradation in solid state in its storage time. This laid a foundation for estimating the relative chemical stability of the drug by determination of its decomposition kinetics using TGA. Although the observed thermal decomposition kinetics of CEZ·Na was complex, a conversion level of 1% was chosen for evaluation of the stability of CEZ·Na crystalline since the mechanism here was more likely to be that of the actual product failure. The evaluation results suggested that the α form of CEZ·Na had the best stability and the amorphous one was the least stable one among α form, dehydrated α form and amorphous form.
