Enhancing the stability of Ni Fe-layered double hydroxide nanosheet array for alkaline seawater oxidation by Ce doping

Electrocatalytic hydrogen production from seawater holds enormous promise for clean energy generation.Nevertheless,the direct electrolysis of seawater encounters significant challenges due to poor anodic stability caused by detrimental chlorine chemistry.Herein,we present our recent discovery that the incorporation of Ce into Ni Fe layered double hydroxide nanosheet array on Ni foam(Ce-Ni Fe LDH/NF)emerges as a robust electrocatalyst for seawater oxidation.During the seawater oxidation process,CeO_(2)is generated,effectively repelling Cl^(-)and inhibiting the formation of Cl O-,resulting in a notable enhancement in the oxidation activity and stability of alkaline seawater.The prepared Ce-Ni Fe LDH/NF requires only overpotential of 390 m V to achieve the current density of 1 A cm^(-2),while maintaining long-term stability for 500 h,outperforming the performance of Ni Fe LDH/NF(430 m V,150 h)by a significant margin.This study highlights the effectiveness of a Ce-doping strategy in augmenting the activity and stability of materials based on Ni Fe LDH in seawater electrolysis for oxygen evolution.

Values of macular ganglion cell-inner plexiform layer and 10-2 visual field measurements in detecting and evaluating glaucoma

AIM:To assess the performance of macular ganglion cell-inner plexiform layer thickness(mGCIPLT)and 10-2 visual field(VF)parameters in detecting early glaucoma and evaluating the severity of advanced glaucoma.METHODS:Totally 127 eyes from 89 participants(36 eyes of 19 healthy participants,45 eyes of 31 early glaucoma patients and 46 eyes of 39 advanced glaucoma patients)were included.The relationships between the optical coherence tomography(OCT)-derived parameters and VF sensitivity were determined.Patients with early glaucoma were divided into eyes with or without central 10°of the VF damages(CVFDs),and the diagnostic performances of OCT-derived parameters were assessed.RESULTS:In early glaucoma,the mGCIPLT was significantly correlated with 10-2 VF pattern standard deviation(PSD;with average mGCIPLT:β=-0.046,95%CI,-0.067 to-0.024,P<0.001).In advanced glaucoma,the mGCIPLT was related to the 24-2 VF mean deviation(MD;with average mGCIPLT:β=0.397,95%CI,0.199 to 0.595,P<0.001),10-2 VF MD(with average mGCIPLT:β=0.762,95%CI,0.485 to 1.038,P<0.001)and 24-2 VF PSD(with average mGCIPLT:β=0.244,95%CI,0.124 to 0.364,P<0.001).Except for the minimum and superotemporal mGCIPLT,the decrease of mGCIPLT in early glaucomatous eyes with CVFDs was more severe than that of early glaucomatous eyes without CVFDs.The area under the curve(AUC)of the average mGCIPLT(AUC=0.949,95%CI,0.868 to 0.982)was greater than that of the average circumpapillary retinal nerve fiber layer thickness(cpRNFLT;AUC=0.827,95%CI,0.674 to 0.918)and rim area(AUC=0.799,95%CI,0.610 to 0.907)in early glaucomatous eyes with CVFDs versus normal eyes.CONCLUSION:The 10-2 VF and mGCIPLT parameters are complementary to 24-2 VF,cpRNFLT and ONH parameters,especially in detecting early glaucoma with CVFDs and evaluating the severity of advanced glaucoma in group level.

Dual-function protective layer for highly reversible Zn anode

The thermodynamic instability of zinc anodes in aqueous electrolytes leads to issues such as corrosion,hydrogen evolution reactions(HER), and dendrite growth, severely hindering the practical application of zinc-based aqueous energy storage devices. To address these challenges, this work proposes a dualfunction zinc anode protective layer, composed of Zn-Al-In layered double oxides(ILDO) by rationally designing Zn-Al layered double hydroxides(Zn-Al LDHs) for the first time. Differing from previous works on the LDHs coatings, firstly, the ILDO layer accelerates zinc-ion desolvation and also captures and anchors SO_(4)^(2-). Secondly, the in-situ formation of the Zn-In alloy phase effectively lowers the nucleation energy barrier, thereby regulating zinc nucleation. Consequently, the zinc anode with the ILDO protective layer demonstrates long-term stability exceeding 1900 h and low voltage hysteresis of 7.5 m V at 0.5 m A cm^(-2) and 0.5 m A h cm^(-2). Additionally, it significantly enhances the rate capability and cycling performance of Zn@ILDO//MnO_(2) full batteries and Zn@ILDO//activated carbon zinc-ion hybrid capacitors.This simple and effective dual-function protective layer strategy offers a promising approach for achieving high-performance zinc-ion batteries.

ANALYSIS OF STRYCHNINE ALKALOIDS IN BIOLOGICAL SAMPLES BY THIN-LAYER CHROMATOGRAPHIC DENSITOMETRY AND DISTRIBUTION STUDY OF STRYCHNINE IN INTOXICATED RATS

A sensitive and rapid analytical procedure was established to detrmine strychnie alkaloids in diverse biological specimens. Samples were treated with hydrochloric acid to precipitate protein and scanned in thin-layer chromatograpic scanner in zig-zag dual-wavelength reflection mode.Detection sensitivity for strychniue was about 0. 05 μg. Quantification recoveries were between89. 2% and 99. 5% with RSD between 2. 92% and 13. 21 %. The method was applied to investigate thedistribution or strychnine in intoxicated rats. The results showed that there were remarkable difference in organs or tissues with the aigaest concentration 4. 56±1. 41μg/g in liver. Diversification experiment proves the method also could be used to analyze other alkaloids in biological samples if theconditions slightly modified.

Electron beam welding of Ti-15-3 titanium alloy to 304 stainless steel with copper interlayer sheet

Electron beam welding of Ti-15-3 titanium alloy to 304 stainless steel with a copper sheet as interlayer was carried out.Microstructures of the joint were studied by optical microscopy(OM),scanning electron microscopy(SEM) and X-ray diffractometry(XRD).In addition,the mechanical properties of the joint were evaluated by tensile test and the microhardness was measured.These two alloys were successfully welded by adding copper transition layer into the weld.Solid solution with a certain thickness was located at the interfaces between weld and base metal in both sides.Regions inside the weld and near the stainless steel were characterized by solid solution of copper with TiFe2 intermetallics dispersedly distributed in it.While weld near titanium alloy contained Ti-Cu and Ti-Fe-Cu intermetallics layer,in which the hardness of weld came to the highest value.Brittle fracture occurred in the intermetallics layer when the joint was stretched.

Layer regrouping for water-flooded commingled reservoirs at a high water-cut stage

Layer regrouping is to divide all the layers into several sets of production series according to the physical properties and recovery percent of layers at high water-cut stage, which is an important technique to improve oil recovery for high water-cut multilayered reservoirs. Dif- ferent regroup scenarios may lead to different production performances. Based on unstable oil-water flow theory, a multilayer commingled reservoir simulator is established by modifying the production split method. Taking into account the differences of layer properties, including per- meability, oil viscosity, and remaining oil saturation, the pseudo flow resistance contrast is proposed to serve as a characteristic index of layer regrouping for high water-cut multilayered reservoirs. The production indices of multi- layered reservoirs with different pseudo flow resistances are predicted with the established model in which the data are taken from the Shengtuo Oilfield. Simulation results show that the pseudo flow resistance contrast should be less than 4 when the layer regrouping is implemented. The K-means clustering method, which is based on the objec- tive function, is used to automatically carry out the layer regrouping process according to pseudo flow resistances. The research result is applied to the IV-VI sand groups of the second member of the Shahejie Formation in the Shengtuo Oilfield, a favorable development performance is obtained, and the oil recovery is enhanced by 6.08 %.

Desorption of Cl^(-) from Mg-Al layered double hydroxide intercalated with Cl^(-) using CO_(2) gas and water

Mg-Al layered double hydroxide intercalated with CO_(3)^(2-)(CO_(3)·Mg-Al LDH) is effective for treating HCl exhaust gas.HCl reacts with CO_(3)^(2-) in CO_(3)·Mg-Al LDH, resulting in the formation of Cl·Mg-Al LDH.We propose that CO_(2) can be used for the desorption of Cl^(-)from Cl·Mg-Al LDH to regenerate CO_(3)·Mg-Al LDH.Herein,we studied the desorption of a from CI-Mg-Al LDH by adding water to Cl·Mg-Al LDH and blowing CO_(2) into it.We also analyzed the effects of temperature and water addition speed on the desorption of CI^(-)from Cl·Mg-Al LDH.Our results show that the added water adhered to CI·Mg-Al LDH and that CO_(2) in the gaseous phase was dissolved in this adhered water,thus generating CO_(3)^(2-).Therefore,anion exchange occurred between CO_(3)^(2-) and Cl^(-)in the Cl·Mg-Al LDH,thus desorbing Cl^(-).

Effect of nitrite intercalated Mg-Al layered double hydroxides on mortar durability under Cl−and SO_(4)^(2-) coexisting environment

The aim of this paper is to investigate the effect of nitrite intercalated Mg-Al layered double hydroxides(Mg-Al LDH-NO_(2))on mortar durability under the coexisting environment of Cl−and SO_(4)^(2-).Cl−and SO_(4)^(2-) binding properties of Mg-Al LDH-NO_(2) in simulated concrete pore solutions,Cl−and SO_(4)^(2-) diffusion properties of mortars with Mg-Al LDHNO 2 were examined.The steel corrosion and resistance of mortar against SO_(4)^(2-) attack were also evaluated.The results indicate that Mg-Al LDH-NO_(2) can effectively adsorb the Cl−and SO_(4)^(2-) in simulated concrete pore solution,and inhibit the diffusion of Cl−and SO_(4)^(2-) into cement mortars.The presence of SO_(4)^(2-) can greatly affect the uptake amount of Cl−,and there is a coupled effect of Cl−and SO_(4)^(2-) on their penetration into mortar specimens.In addition,Mg-Al LDH-NO_(2) can greatly upgrade the resistance of mortars against SO_(4)^(2-) attack and well prevent the steel from corrosion.However,Cl−will aggravate the SO_(4)^(2-) attack and SO_(4)^(2-) can initially decrease and then increase the steel corrosion.

Performance Analysis of Physical Layer Security over α-η-κ-μ Fading Channels

In this paper, we consider the secure data transmission over α-η-κ-μ fading channels, which are recently proposed to encompass nearly all the well-known statistical models adopted in the literature. In particular, we address the secrecy performance in terms of the average secrecy capacity(ASC) and the secrecy outage probability(SOP), for which novel analytical expressions are derived. Simulation results verify the analysis and demonstrate the impact of the physical parameters on the secrecy performance of this new channel fading model.

Dynamics of low-speed streak evolution and interaction in laminar boundary layer

The present paper presents an experimental effort on the regeneration process of two low-speed laminar streaks in a zero-pressure-gradient laminar boundary layer. Two vertical thin wires separated by a spanwise distance of 30 mm are used to introduce disturbances of two rolls of transitional Karmain vortex street to the downstream boundary layer. Both hydrogen bubble visualization and particle image velocimetry （PIV） measurement show that two lowspeed streaks are induced through leading-edge receptivity process. As these streaks develop in the downstream, two additional low-speed streaks begin to appear outboard of the flank of the original two, together with complex dynamics of streak splitting and merging. A flow pattern of four streaks aligned along the spanwise direction occurs finally in the far downstream. It is found that besides the mechanisms of streak breakdown, the streak interaction is also an important factor characterizing the instability of low speed streaks and their regeneration process.

Promoting surface reconstruction of NiFe layered double hydroxides via intercalating[Cr(C_(2)O_(4))_(3)]^(3-)for enhanced oxygen evolution

Rationally manipulating surface reconstruction of catalysts for water oxidation,inducing formation and dynamic accumulation of catalytically active centers still face numerous challenges.Herein,the introduction of[Cr(C_(2)O_(4))_(3)]^(3-)into NiFe LDHs by intercalation engineering to promote surface reconstruction achieves an advanced oxygen evolution reaction(OER)activity.In view of the weak electronegativity of Cr^(3+) in[Cr(C_(2)O_(4))_(3)]^(3-),the intercalation of[Cr(C_(2)O_(4))_(3)]^(3-)is expected to result in an electron-rich structure of Fe sites in NiFe LDHs,and higher valence state of Ni can be formed with the charge transfer between Fe and Ni.The optimized electronic structure of NiFe-[Cr(C_(2)O_(4))_(3)]^(3-)-LDHs with more active Ni^(3+) species and the expedited dynamic generation of Ni^(3+) (Fe)OOH phase during the OER process contributed to its excellent catalytic property,revealed by in situ X-ray absorption spectroscopy,Raman spectroscopy,and quasi-in situ X-ray photoelectron spectroscopy.With the modulated electronic structure of metal sites,NiFe-[Cr(C_(2)O_(4))_(3)]^(3-)-LDHs exhibited promoted OER property with a lower overpotential of 236 mV at the current density of 10 mA cm^(-2).This work illustrates the intercalation of conjugated anion to dynamically construct desired Ni^(3+) sites with the optimal electronic environment for improved OER electrocatalysis.

On the Representation of Multi-layer Woven Structure

A quantitative method is developed to identify the structures of multi-layer woven fabric in this study. Six structural parameters are selected to represent the fabric structure. With some design criteria for the reinforcement of textile composites, the relationships among the structural parameters are derived for different binding patterns of the fabric structure. The conditions, which meet the requirements of structural cell stability,are also discussed.

An Excellent Gas Chromatographic Stationary Phase for Separation of Phenol and Cresol Isomers--Heptakis(2,6-di-O-pentyl-3-O-allyl)-β-Cyclodextrin

Heptakis(2.6-di-O-pentyl-3-O-ally)-β-cyclodextrin as an excellent gas chromatographic stationary phase separating phenol and cresol isomers is described.

Characterization of Cd1-xZnxTe（0≤x≤1） Nanolayers Grown by Atomic Layer Deposition on GaSb and GaAs（001） Oriented Substrates

ZnTe, CdTe, and the ternary alloy CdZnTe are important semiconductor materials used widely for the detection of an important range of electromagnetic radiation as gamma ray and X-ray. Although, recently these materials have acquired renewed importance due to the new explored nanolayer properties of modern devices. In addition, as shown in this work they can be grown using uncomplicated synthesis techniques based on the deposition in vapour phase of the elemental precursors. This work presents the results obtained from the deposition of nanolayers of these materials using the precursor vapour on GaAs and GaSb (001) substrates. This growth technique, extensively known as atomic layer deposition (ALD), allows the layers growth with nanometric dimension. The main results presented in this work are the used growth parameters and the results of the structural characterization of the layers by the means of Raman spectroscopy measurements. Raman scattering shows the peak corresponding to longitudinal optical (LO)-ZnTe, which is weak and slightly redshift in comparison with that reported for the ZnTe bulk at 210 cm^-1. For the case of the CdTe nanolayer, Raman spectra presented the LO-CdTe peak, which is indicative of the successful growth of the layer. Its weak and slightly redshift in comparison with that reported for the CdTe bulk can be related with the nanometric characteristic of this layer. The performed high-resolution X-ray diffraction (HR-XRD) measurement allows to study some important characteristics such as the crystallinity of the grown layer. In addition, the HR-XRD measurement suggests that the crystalline quality has dependence on the growth temperature.

Nondoped-type White Organic Light-Emitting Diode Using Star-Shaped Hexafluorenylbenzene as an Energy Transfer Layer

White organic light-emitting diodes （WOLEDs） with a structure of indium-tin-oxide （ITO）/N,N＇-bis- （1-naphthyl）-N,N＇-diphenyl- （1, 1＇-biphenyl）-4,4＇-diamine （NPB）/1,2,3,4,5,6-hexakis（9,9-diethyl-9H-fluoren-2- yl）benzene （HKEthFLYPh）/5,6,11,12-tetraphenylnaphtacene （rubrene）/tris（8-hydroxyquinoline） aluminum （Alq3）/Mg：Ag were fabricated by vacuum deposition method, in which a novel star-shaped hexafluorenyl- benzene HKEthFLYPh was used as an energy transfer layer, and an ultrathin layer of rubrene was inserted between HKEthFLYPh and Alq3 layers as a yellow light-emitting layer instead of using a time-consuming doping process. A fairly pure WOLED with Commissions Internationale De L＇Eclairage （CIE） coordinates of （0.32, 0.33） was obtained when the thickness of rubrene was 0.3 nm, and the spectrum was insensitive to the applied voltage. The device yielded a maximum luminance of 4816 cd/m2 at 18 V.

Penny-shaped interfacial crack between dissimilar magnetoelectroelastic layers

A penny-shaped interfacial crack between dissimilar magnetoelectroelastic layers subjected to magnetoelectromechanical loads is investigated,where the magnetoelectrically impermeable crack surface condition is adopted. By using Hankel transform technique,the mixed boundary value problem is firstly reduced to a system of singular integral equations,which are further reduced to a system of algebraic equations. The field intensity factors and energy release rate are finally derived. Numerical results elucidate the eects of crack configuration,electric and/or magnetic loads,and material parameters of the magnetoelectroelastic layers on crack propagation and growth. This work should be useful for the design of magnetoelectroelastic composite structures.

钩藤生物碱中一对异构体的TLC-FT-SERS研究

A new method for analysing the ingredients of rhynchophylline and isrhynchophylline in Uncaria Rhynchophylla Jacks using hyphenaed high efficiency thin layer chromatographic（TLC） and the surface-enhanced raman spectroscopic（SERS） technics is reported. The results show that the characteristic spectral bands of rhynchophylline can be obtained from the TLC spot with minimum amount of rhynchophylline sample of about 2 5 mm diameter. The difference between the SERS and solid spectra are found. Spectral band at 1 397 cm-1 was obtained wits great enhanced want. Molecule was absorbed in surface silver sol by pair of electrons in —OCH3. Isrhynchophylline sample spectrum band at 1 615 cm-1 obtained the greatest enhance. Isrhynchophylline molecule was absorbed in surface silver sol by pair of electron at N atom in ring indole. An absorption model of rhynchophylline and isrhynchophylline and silver sol is proposed. That effective combination of TLC and SERS can be used to analyse the chemical ingredients with high sensitivity.

柱色谱分离提纯蔗糖-6-乙酸酯

采用薄层色谱法定性 ,以柱色谱法分离提纯蔗糖 6 乙酸酯。蔗糖 6 乙酸酯的平均回收率为 95 0 6 % ,相对标准偏差为 1 0 5 %。并用红外光谱、质谱、核磁共振等方法对蔗糖 6

薄层色谱联用气相色谱法研究食用植物油中sn-2位脂肪酸的分布

选取大豆油、花生油、玉米油、菜籽油、芝麻油、棕榈油、橄榄油、茶籽油、葵花籽油、稻米油、椰子油、亚麻籽油、山柚油13类30个样品作为分析对象,采用专一性猪胰脂肪酶水解脂肪酸甘油三酯,通过薄层色谱分离得到sn-2位单甘酯,甲酯化后进气相色谱仪,对sn-2位脂肪酸组成进行分析并与全脂肪酸组成相比较。结果表明:植物油中脂肪酸主要为棕榈酸(C16∶0)、硬脂酸(C18∶0)、油酸(C18∶1)、亚油酸(C18∶2)、亚麻酸(C18∶3)。以C16∶0/C18∶0比值-C18∶2/C18∶1比值作图可用于区别不同种类植物油;然而,除椰子油和亚麻籽油等特征脂肪酸含量高的油脂外,多数植物油中sn-2位脂肪酸主要为油酸和亚油酸,两者加和多大于90%。因此,采用特征sn-2位脂肪酸区别不同植物油的效果不及全脂肪酸比值分析。但是,sn-2位脂肪酸更亲和人体,有利于人体吸收,在营养学上更有实用意义,研究结果可为植物油的营养价值研究提供数据基础。

不同产地菟丝子基源考证及含总黄酮量测定

对不同产地的菟丝子药材进行基源考证,并对其含总黄酮量进行测定.通过性状、显微以及薄层色谱鉴定法,对10个产地菟丝子药材进行真伪鉴别和基源考证;利用紫外分光光度法测定10个产地菟丝子药材中含总黄酮的量.结果表明,10个产地菟丝子药材均为正品,其中产地黑龙江萝北、内蒙古锡盟、内蒙古阿拉善的基源为菟丝子,产地河南焦作、山东济宁、安徽六安、安徽霍山、广西南宁、陕西宝鸡、云南文山的基源为南方菟丝子;10个产地菟丝子药材含总黄酮的量差异不大,其中河南焦作菟丝子含总黄酮量最高,为18.50 mg·g^(-1),云南文山菟丝子含总黄酮量最低,为16.98 mg·g^(-1).本研究为后续菟丝子药材质量标准的制定及开发利用提供了参考.