Oxygen tension modulates cell function in an in vitro three-dimensional glioblastoma tumor model

Hypoxia is a typical feature of the tumor microenvironment,one of the most critical factors affecting cell behavior and tumor progression.However,the lack of tumor models able to precisely emulate natural brain tumor tissue has impeded the study of the effects of hypoxia on the progression and growth of tumor cells.This study reports a three-dimensional(3D)brain tumor model obtained by encapsulating U87MG(U87)cells in a hydrogel containing type I collagen.It also documents the effect of various oxygen concentrations(1%,7%,and 21%)in the culture environment on U87 cell morphology,proliferation,viability,cell cycle,apoptosis rate,and migration.Finally,it compares two-dimensional(2D)and 3D cultures.For comparison purposes,cells cultured in flat culture dishes were used as the control(2D model).Cells cultured in the 3D model proliferated more slowly but had a higher apoptosis rate and proportion of cells in the resting phase(G0 phase)/gap I phase(G1 phase)than those cultured in the 2D model.Besides,the two models yielded significantly different cell morphologies.Finally,hypoxia(e.g.,1%O2)affected cell morphology,slowed cell growth,reduced cell viability,and increased the apoptosis rate in the 3D model.These results indicate that the constructed 3D model is effective for investigating the effects of biological and chemical factors on cell morphology and function,and can be more representative of the tumor microenvironment than 2D culture systems.The developed 3D glioblastoma tumor model is equally applicable to other studies in pharmacology and pathology.

Three-dimensional structural models,evolution and petroleum geological significances of transtensional faults in the Ziyang area,central Sichuan Basin,SW China

With drilling and seismic data of Transtensional(strike-slip)Fault System in the Ziyang area of the central Sichuan Basin,SW China plane-section integrated structural interpretation,3-D fault framework model building,fault throw analyzing,and balanced profile restoration,it is pointed out that the transtensional fault system in the Ziyang 3-D seismic survey consists of the northeast-trending FI19 and FI20 fault zones dominated by extensional deformation,as well as 3 sets of northwest-trending en echelon normal faults experienced dextral shear deformation.Among them,the FI19 and FI20 fault zones cut through the Neoproterozoic to Lower Triassic Jialingjiang Formation,presenting a 3-D structure of an“S”-shaped ribbon.And before Permian and during the Early Triassic,the FI19 and FI20 fault zones underwent at least two periods of structural superimposition.Besides,the 3 sets of northwest-trending en echelon normal faults are composed of small normal faults arranged in pairs,with opposite dip directions and partially left-stepped arrangement.And before Permian,they had formed almost,restricting the eastward growth and propagation of the FI19 fault zone.The FI19 and FI20 fault zones communicate multiple sets of source rocks and reservoirs from deep to shallow,and the timing of fault activity matches well with oil and gas generation peaks.If there were favorable Cambrian-Triassic sedimentary facies and reservoirs developing on the local anticlinal belts of both sides of the FI19 and FI20 fault zones,the major reservoirs in this area are expected to achieve breakthroughs in oil and gas exploration.

Application of Patient Simulators Combined with Internet plus Scenario Simulation Teaching Models on Intravenous Infusion Nursing Education in China

Objective: To explore the effectiveness of applying patient simulators combined with Internet Plus scenario simulation teaching models on intravenous (IV) infusion nursing education, and to provide scientific evidence for the implementation of advanced teaching models in future nursing education. Methods: Enrolled 60 nurses who took the IV infusion therapy training program in our hospital from January 2022 to December 2023 for research. 30 nurses who were trained in traditional teaching models from January to December 2022 were selected as the control group, and 30 nurses who were trained with simulation-based teaching models with methods including simulated patients, internet, online meetings which can be replayed and scenario simulation, etc. from January to December 2023 were selected as the experimental group. Evaluated the learning outcomes based on the Competency Inventory for Nursing Students (CINS), Problem-Solving Inventory (PSI), comprehensive learning ability, scientific research ability, and proficiency in the theoretical knowledge and practical skills of IV infusion therapy. Nursing quality, the incidence of IV infusion therapy complications and nurse satisfaction with different teaching models were also measured. Results: The scientific research ability, PSI scores, CINS scores, and comprehensive learning ability of the experimental group were better than those of the control group (P 0.05), and their assessment results of practical skills, nursing quality of IV infusion therapy during training, and satisfaction with teaching models were all better than those of the control group with statistical significance (P < 0.05). The incidence of IV infusion therapy complications in the experimental group was lower than that in the control group, indicating statistical significance (P < 0.05). Conclusions: Teaching models based on patient simulators combined with Internet Plus scenario simulation enable nursing students to learn more directly and practice at any time and in any place, and can improve their proficiency in IV infusion theoretical knowledge and skills (e.g. PICC catheterization), core competencies, problem-solving ability, comprehensive learning ability, scientific research ability and the ability to deal with complicated cases. Also, it helps provide high-quality nursing education, improve the nursing quality of IV therapy, reduce the incidence of related complications, and ensure the safety of patients with IV therapy.

A Study of Innovative College English Teaching Model for Global Competence

Against the backdrop of globalization and deepening international cooperation,countries are putting forward higher demands on the global competence of talents.In this context,college English teaching,as an important part of the higher education system,faces the challenge of cultivating globally competent talents.This study analyzes the core components of global competence through literature review,analyzes the deficiencies in existing college English teaching,and aims to explore and construct a college English teaching model that is compatible with the global competence framework.This study explores how to integrate global competency development into college English teaching from three aspects:curriculum content,teaching methodology,and assessment system.We expect that the proposed teaching model can effectively improve students’English application skills,intercultural communication skills,and critical thinking skills,so as to better meet the demand for global competence in the context of globalization.

Study on the Construction and Evaluation System of Clinical Midwifery Teaching Faculty under the New Nursing Model

Objective:To explore the impact of the construction of a clinical midwifery teaching faculty and the development of an evaluation system under the new nursing model on the current teaching quality.Methods:From July 2022 to March 2023,10 clinical teaching teachers and 20 midwifery interns from Beijing Anzhen Hospital affiliated with Capital Medical University were selected as the subjects of this study.The clinical teaching teachers and midwifery interns were divided into an observation group and a control group,with each group including 5 clinical teaching teachers and 10 midwifery interns.The observation group received daily management and evaluation under the new nursing model,while the control group received management and evaluation under the traditional nursing model.The teaching quality evaluation of clinical midwifery teaching teachers by midwifery interns,the exit exam scores of midwifery interns,and the scores of clinical teaching teachers’internship lectures and teaching rounds were compared between the two groups.Results:In the observation group,the scores for teaching attitude,teaching skills,and teaching management in the teaching quality evaluation of clinical midwifery teaching teachers were higher than those in the control group.The professional theory scores(91.28±3.64)and overall nursing comprehensive scores(92.56±4.38)of midwifery interns in the observation group were higher than those of midwifery interns in the control group(81.58±2.27 and 80.29±3.33,respectively).The scores for internship lectures(89.32±4.15)and teaching rounds(90.64±5.52)in the observation group were also significantly higher than those in the control group(80.46±3.28 and 81.24±4.38,respectively),and the differences were statistically significant(P<0.05).Conclusion:The management of the clinical midwifery teaching faculty under the new nursing model effectively improved the quality of clinical teaching.It significantly enhanced the teaching effectiveness of clinical teaching teachers and the proficiency of midwifery interns in clinical operations,making it worthy of promotion and use.

Research and Practice of the Blended Teaching Model of BOPPPS Teaching Method Under the Background of Digital Education: Taking Operations Research Course as an Example

The rapid development of digital education provides new opportunities and challenges for teaching model innovation.This study aims to explore the application of the BOPPPS(Bridge-in,Objective,Pre-assessment,Participatory learning,Post-assessment,Summary)teaching method in the development of a blended teaching model for the Operations Research course under the background of digital education.In response to the characteristics of the course and the needs of the student group,the teaching design is reconstructed with a student-centered approach,increasing practical teaching links,improving the assessment and evaluation system,and effectively implementing it in conjunction with digital educational technology.This teaching model has shown significant effectiveness in the context of digital education,providing valuable experience and insights for the innovation of the Operations Research course.

A Study of a Moral Dilemma Stories Teaching Model Focusing on the Development of Higher-Order Thinking --"Synthetic polymers" as an example

Cultivating students'higher-order thinking is one of the important goals of modern education,and innovative teaching model is an effective way to achieve this goal.Aiming at the inadequacy of the existing moral dilemma stories approach in the transformation of knowledge and behavior,this research constructs a new Project Based Learning-Ethical Dilemma Stories(PBL-EDS)Teaching Model applicable to China's secondary education stage based on the innovative features of the moral dilemma stories approach on the core competencies,taking the chemistry subject as an example to carry out practice,and puts forward suggestions for the implementation of the teaching model.Chemistry as an example to carry out the practice,and suggestions are made for the implementation of the teaching model.

Analysis of the Role of Problem-Based Independent Learning Model in Teaching Cerebral Ischemic Stroke First Aid in Emergency Medicine

Objective:To analyze the effect of using a problem-based(PBL)independent learning model in teaching cerebral ischemic stroke(CIS)first aid in emergency medicine.Methods:90 interns in the emergency department of our hospital from May 2022 to May 2023 were selected for the study.They were divided into Group A(45,conventional teaching method)and Group B(45 cases,PBL independent learning model)by randomized numerical table method to compare the effects of the two groups.Results:The teaching effect indicators and student satisfaction scores in Group B were higher than those in Group A(P<0.05).Conclusion:The use of the PBL independent learning model in the teaching of CIS first aid can significantly improve the teaching effect and student satisfaction.

Three Subjects and Seven Duties Model:Empowering Informatization Teaching Ability of Pre-Service Teachers

By constructing a model,this study seeks to provide suggestions for strengthening pre-service teachers’informatization teaching ability.It aims to answer the following research questions:(1)What do the pre-service teachers know about informatization instruction?What is their level of informatization teaching ability?(2)What factors influence pre-service teachers’ability to deliver informatization instruction?How to overcome the obstacles?The inquiry focuses on the theoretical exploration of informatization teaching ability,questionnaire,and interview analysis on the current condition and improvement of pre-service teachers’informatization teaching ability.The data from the questionnaire and interview of the pre-service teachers were evaluated from three dimensions:awareness and attitude towards informatization teaching,knowledge of informatization teaching,and the ability to apply informatization teaching skills innovatively and comprehensively.The 3S-7D(Three Subjects and Seven Duties)model consisting of three subjects and the seven duties that go with them is established.The three subjects include pre-service teachers,teacher educators,and higher education schools.The seven duties involve pre-service teachers demonstrating learning motivation,cross-discipline thinking,and information and communications technology mastery;teacher educators actively constructing informatization teaching practice and formative assessment;and higher education schools providing adequate hardware and software equipment while offering cooperative opportunities with primary and junior schools through institutionalization.

Practical effect of different teaching modes in teaching gastrointestinal surgery nursing

BACKGROUND With the continuous development and progress of medical technology,the position of surgical nursing in the field of clinical medicine is becoming in-creasingly prominent.As an important branch of the surgical field,the nursing requirements and difficulty of gastrointestinal surgery are also increasing.In order to improve the teaching quality of nursing care in gastrointestinal surgery,many educators and researchers are actively exploring new teaching methods.Among them,the teaching method case-based learning(CBL),scene-simulated learning(SSL),task-based learning(TBL),combining self-evaluation and training mode is considered as an effective method.This method aims to help students to better master knowledge and skills and improve their comprehensive quality by cultivating their self-evaluation ability.AIM To explore the practical effect of CBL-SSL-TBL combined with training mode and student self-assessment in nursing teaching of gastrointestinal surgery.METHODS Seventy-one nursing interns in our hospital from December 2020 to December 2021 were selected.According to different teaching modes,they were divided into observation group CBL-SSL-TBL combined with training mode combined with student self-assessment and control group(conventional teaching mode),of which 36 were in observation group and 35 were in control group.The results of operational skills,theoretical knowledge,nursing students'satisfaction,learning effectiveness questionnaire and teaching effect were compared between the two groups.RESULTS Compared between the two groups,the operational skills and theoretical knowledge scores of the observation group were higher than those of the control group,and the difference was statistically significant(P<0.05).Compared between the two groups,the total satisfaction ratio of the observation group was higher than that of the control group,the difference was statistically significant(P<0.05).Compared between the two groups,the observation group was lower than the control group in the questionnaire results of learning efficacy,and the difference was statistically significant(P<0.05).Compared between the two groups,the proportion of thinking ability,subjective initiative and understanding of theoretical knowledge in the observation group was higher than that in the control group,the difference was statistically significant(P<0.05).CONCLUSION The use of CBL-SSL-TBL combined with training mode and student self-assessment in gastrointestinal surgery nursing teaching can improve the operational skills of nursing interns,theoretical knowledge and satisfaction scores of nursing students,improve the results of learning efficiency questionnaire and teaching effect,which can be popularized in clinical teaching.

Analysis of the History and Current Situation of the Development of General Practice Teaching Clinics in China

A summary of the exploration of the teaching mode of the general practice teaching clinic, a summary of the deficiencies of the teaching clinic and a summary of the significance of the establishment of the general practice teaching clinic are presented with a view to promoting the development of general practice and cultivating more excellent successors in general practice.

On the Teaching Design of Graduates’EAP Course:Enhancing Language Proficiency and Critical Thinking Skills

This paper explores the integration of the bridge-in,objectives,pre-assessment,participatory activities,post-assessment and summary(BOPPPS)teaching model within the context of the post-graduates Academic English course.It discusses how this structured approach can effectively enhance students’language proficiency,foster critical thinking skills,and align with the multifaceted objectives of advanced English language education.The study provides a detailed examination of each BOPPPS component as applied to the post-graduates Academic English curriculum,supported by theoretical underpinnings and practical implications.

Research on Three-Dimensional Simulation of the Internal Arc Gear Skiving

Aiming at the problems that the simulation accuracy which is reduced due to the simplification of the model,a three-dimensional simulation method based on solid modeling is being proposed.By analyzing the motion relationship and positional relationship between the caries knife and the workpiece,the coordinate system of the caries machining was established.With the MATLAB software,the cutting edge model and the blade sweeping surface model of the boring cutter are sequentially established.Boolean operation is performed on the blade swept surface formed by the tooth cutter teeth with time t and the workpiece tooth geometry as well as the undeformed three-dimensional chip geometry model and the instantaneous cogging geometry model are obtained at different times.Through the compare between gear end face simulation tooth profile and the theoretical inner arc tooth profile,we verified the accuracy and rationality of the proposed method.

Application of the Just-in-Time Teaching(JiTT)Model in Bilingual Courses of Chinese-Foreign Cooperative Education

The teaching abilities of bilingual teachers have emerged as one of the major bottlenecks hindering the further development of Chinese-foreign cooperative education projects.Implementing the JiTT(Just-in-Time Teaching)model in bilingual courses of Chinese-foreign cooperative education can effectively integrate information technology with traditional classroom teaching.This integration enhances teaching quality and effectiveness,encourages university instructors to improve their diverse and collective capabilities,promotes digital development,and contributes to the enhancement of students’learning abilities and overall improvement.

Study of the geomagnetic field's regional gradients in Chinese continent using three-dimensional surface Spline model

We combined domestic ground-based and satellite magnetic measurements to create a regional three-dimensional surface Spline(3DSS)gradient model of the main geomagnetic field over the Chinese continent.To improve the precision of the model,we considered the data gap between the ground and satellite data.We compared and analyzed the results of the Taylor polynomial,surface Spline,and CHAOS-6(the CHAMP,?rsted and SAC-C model of Earth’s magnetic field)gradient models.Results showed that the gradients in the south-north and east-west directions of the four models were consistent.The 3DSS model was able to express not only gradients at different altitudes,but also average gradients inside the research area.The two Spline models were able to capture more information on gradient anomalies than were the fitted models.Strong local anomalies were observed in northern Xinjiang,Beijing,and the junction area between Jiangsu and Zhejiang,and the total intensity F decreased whereas the altitude increased.The gradient decreased by 21.69%in the south-north direction and increased by 11.78%in the east-west direction.In addition,the altitude gradient turned from negative to positive while the altitude increased.The Spline model and the two fitted models differed mainly in the field sources they expressed and the modeling theory.

Can preoperative planning using IRIS™three-dimensional anatomical virtual models predict operative findings during robot-assisted partial nephrectomy?

Objective To evaluate the predictive validity of IRIS™(Intuitive Surgical®,Sunnyvale,CA,USA)as a planning tool for robot-assisted partial nephrectomy(RAPN)by assessing the degree of overlap with intraoperative execution.Methods Thirty-one patients scheduled for RAPN by four experienced urologists were enrolled in a prospective study.Prior to surgery,urologists reviewed the IRIS™three-dimensional model on an iphone Operating System(iOS)app and completed a questionnaire outlining their surgical plan including surgical approach,and ischemia technique as well as confidence in executing this plan.Postoperatively,questionnaires assessing the procedural approach,clinical utility,efficiency,and effectiveness of IRIS™were completed.The degree of overlap between the preoperative and intraoperative questionnaires and between the planned approach and actual execution of the procedure was analyzed.Questionnaires were answered on a 5-point Likert scale and scores of 4 or greater were considered positive.Results Mean age was 65.1 years with a mean tumor size of 27.7 mm(interquartile range 17.5-44.0 mm).Hilar tumors consisted of 32.3%;48.4%of patients had R.E.N.A.L.nephrometry scores of 7-9.On preoperative questionnaires,the surgeons reported that in 67.7%cases they were confident that they can perform the procedure successfully,and on intraoperative questionnaires,the surgeons reported that in 96.8%cases IRIS™helped achieve good spatial sensation of the anatomy.There was a high degree of overlap between preoperative and intraoperative questionnaires for the surgical approach,interpreting anatomical details and clinical utility.When comparing plans for selective or off-clamp,the preoperative plan was executed in 90.0%of cases intraoperatively.Conclusion A high degree of overlap between the preoperative surgical approach and intraoperative RAPN execution was found using IRIS™.This is the first study to evaluate the predictive accuracy of IRIS™during RAPN by comparing preoperative plan and intraoperative execution.

Application of Three-dimensional Teaching Mode in College English Teaching

The three-dimensional teaching mode is an integrated teaching mode,which integrates teaching design,teaching methods,teaching resources and student learning.In the English classroom,the three-dimensional teaching mode is used to make the English learning class full of vitality and to improve the effect of English classroom teaching.

Three-Dimensional Analytical Modeling of Axial-Flux Permanent Magnet Drivers

In this paper, the axial-flux permanent magnet driver is modeledand analyzed in a simple and novel way under three-dimensional cylindricalcoordinates. The inherent three-dimensional characteristics of the deviceare comprehensively considered, and the governing equations are solved bysimplifying the boundary conditions. The axial magnetization of the sectorshapedpermanent magnets is accurately described in an algebraic form bythe parameters, which makes the physical meaning more explicit than thepurely mathematical expression in general series forms. The parameters of theBessel function are determined simply and the magnetic field distribution ofpermanent magnets and the air-gap is solved. Furthermore, the field solutionsare completely analytical, which provides convenience and satisfactoryaccuracy for modeling a series of electromagnetic performance parameters,such as the axial electromagnetic force density, axial electromagnetic force,and electromagnetic torque. The correctness and accuracy of the analyticalmodels are fully verified by three-dimensional finite element simulations and a15 kW prototype and the results of calculations, simulations, and experimentsunder three methods are highly consistent. The influence of several designparameters on magnetic field distribution and performance is studied and discussed.The results indicate that the modeling method proposed in this papercan calculate the magnetic field distribution and performance accurately andrapidly, which affords an important reference for the design and optimizationof axial-flux permanent magnet drivers.

Analysis of an event study using the Fama–French five‑factor model:teaching approaches including spreadsheets and the R programming language

The current financial education framework has an increasing need to introduce tools that facilitate the application of theoretical models to real-world data and contexts.However,only a limited number of free tools are available for this purpose.Given this lack of tools,the present study provides two approaches to facilitate the implementa-tion of an event study.The first approach consists of a set of MS Excel files based on the Fama–French five-factor model,which allows the application of the event study methodology in a semi-automatic manner.The second approach is an open-source R-programmed tool through which results can be obtained in the context of an event study without the need for programming knowledge.This tool widens the calculus possibilities provided by the first approach and offers the option to apply not only the Fama–French five-factor model but also other models that are common in the finan-cial literature.It is a user-friendly tool that enables reproducibility of the analysis and ensures that the calculations are free of manipulation errors.Both approaches are freely available and ready-to-use.

Problem-based Learning Combining Seminar Teaching Method for the Practice of Mathematical Modeling Course's Teaching Reform for Computer Discipline

Mathematical modeling course has been one of the fast development courses in China since 1992,which mainly trains students’innovation ability.However,the teaching of mathematical modeling course is quite difficult since it requires students to have a strong mathematical foundation,good ability to design algorithms,and programming skills.Besides,limited class hours and lack of interest in learning are the other reasons.To address these problems,according to the outcome-based education,we adopt the problem-based learning combined with a seminar mode in teaching.We customize cases related to computer and software engineering,start from simple problems in daily life,step by step deepen the difficulty,and finally refer to the professional application in computer and software engineering.Also,we focus on ability training rather than mathematical theory or programming language learning.Initially,we prepare the problem,related mathematic theory,and core code for students.Furtherly,we train them how to find the problem,and how to search the related mathematic theory and software tools by references for modeling and analysis.Moreover,we solve the problem of limited class hours by constructing an online resource learning library.After a semester of practical teaching,it has been shown that the interest and learning effectiveness of students have been increased and our reform plan has achieved good results.