Computed tomography three-dimensional reconstruction in the diagnosis of bleeding small intestinal polyps:A case report

BACKGROUND Computed tomography(CT)small bowel three-dimensional(3D)reconstruction is a powerful tool for the diagnosis of small bowel disease and can clearly show the intestinal lumen and wall as well as the outside structure of the wall.The horizontal axis position can show the best adjacent intestinal tube and the lesion between the intestinal tubes,while the coronal position can show the overall view of the small bowel.The ileal end of the localization of the display of excellent,and easy to quantitative measurement of the affected intestinal segments,the sagittal position for the rectum and the pre-sacral lesions show the best,for the discovery of fistulae is also helpful.Sagittal view can show rectal and presacral lesions and is useful for fistula detection.It is suitable for the assessment of inflammatory bowel disease,such as assessment of disease severity and diagnosis and differential diagnosis of the small bowel and mesenteric space-occupying lesions as well as the judgment of small bowel obstruction points.CASE SUMMARY Bleeding caused by small intestinal polyps is often difficult to diagnose in clinical practice.This study reports a 29-year-old male patient who was admitted to the hospital with black stool and abdominal pain for 3 months.Using the combination of CT-3D reconstruction and capsule endoscopy,the condition was diagnosed correctly,and the polyps were removed using single-balloon enteroscopyendoscopic retrograde cholangiopancreatography without postoperative complications.CONCLUSION The role of CT-3D in gastrointestinal diseases was confirmed.CT-3D can assist in the diagnosis and treatment of gastrointestinal diseases in combination with capsule endoscopy and small intestinal microscopy.

GPU-accelerated three-dimensional reconstruction method of the Compton camera and its application in radionuclide imaging

A novel and fast three-dimensional reconstruction method for a Compton camera and its performance in radionuclide imaging is proposed and analyzed in this study. The conical surface sampling back-projection method with scattering angle correction(CSS-BP-SC) can quickly perform the back-projection process of the Compton cone and can be used to precompute the list-mode maximum likelihood expectation maximization(LM-MLEM). A dedicated parallel architecture was designed for the graphics processing unit acceleration of the back-projection and iteration stage of the CSS-BP-SC-based LM-MLEM. The imaging results of the two-point source Monte Carlo(MC) simulation demonstrate that by analyzing the full width at half maximum along the three coordinate axes, the CSS-BP-SC-based LM-MLEM can obtain imaging results comparable to those of the traditional reconstruction algorithm, that is, the simple back-projection-based LM-MLEM. The imaging results of the mouse phantom MC simulation and experiment demonstrate that the reconstruction results obtained by the proposed method sufficiently coincide with the set radioactivity distribution, and the speed increased by more than 664 times compared to the traditional reconstruction algorithm in the mouse phantom experiment. The proposed method will further advance the imaging applications of Compton cameras.

Minimally Invasive Maxillofacial Surgery Using Digital Work Surgery: A Case of Alveolar Ridge Reconstruction after Maxillary Cystectomy

Introduction: Iliac particulate cancellous bone and marrow (PCBM) is commonly used as a high-quality reconstruction material;however, PCBM cannot be extracted in sufficient amounts to meet demand. To determine the appropriate amount of iliac PCBM to be collected, we used digital technology to measure the volume required for jaw reconstruction before surgery. Clinical Case: The patient, a 23-year-old man, underwent surgery for a calcifying odontogenic cyst. A maxillary cyst occupied the left anterior-premolar region (tooth 21 - 25) and the deciduous canine remained;a permanent canine was included in the cyst. We planned to preserve the teeth except for the impacted canine, completely excise the maxillary cyst, and preserve the alveolar ridge morphology. Preoperative digital imaging was used to determine the amount of alveolar ridge reconstruction required and accordingly determine the amount of iliac cancellous bone to be harvested. We used a titanium mesh tray and grafts of iliac particulate cancellous bone and marrow to reconstruct the alveolar ridge. The amount of iliac cancellous bone that needed to be collected was clarified and the supply amount could be collected in just the right amount;thus, the cortical bone of the iliac inner plate could be preserved. The alveolar bone morphology was reconstructed to allow the placement of dental implants as per the preoperative digital surgery. Three years after the operation, no sign of recurrence has been observed. Conclusion: Minimally invasive surgery was performed by clarifying the amount of iliac cancellous bone graft that needs to be harvested, which improved the accuracy of surgery.

Study on Multi-density Contrast Agent Fillers of Duct Casting Based on CT Three-Dimensional Reconstruction

The three-dimensional visualization model of human body duct is based on virtual anatomical structure reconstruction with duct angiography,which realizes virtual model transferred from two-dimensional,planar and static images into three-dimensional,stereoscopic and dynamic ones repectively.In recent years,the multi-duct segmentation and division of the same specimen（or organ） is the focus of attention shared by surgeons and clinical anatomists.On the basis of 4.22 g/cm3 body bone density,this study has screened out metal oxide contract agent with different density for infusion and modeling,as well as compared and analyzed the effects of three-dimensional image of CT virtual bronchoscopy（CTVB）,three-dimensional image of CT maximum intensity projection and three-dimensional model.This experiment result showed synchronously infusing multi-duct of same specimen（or organ） with contrast agent in different densities could reconstruct three-dimensional models of all ducts once only and adjust threshold to develop single or multiple ducts.It was easier to segment and observe the duct structure,anastomosis,directions and crossing in different parts,which was beyond comparison with three-dimensional image of CTVB.Although the existing three-dimensional duct reconstruction techniques still cannot be applied in living bodies temporarily,this study focused on a creative design of ducts segmentation in different density,which proposed a new experimental idea for developing multi-duct three-dimensional model in living body in the future.It will play a significant role in disease diagnosis and individual design in surgical treatment program.Therefore,this study observes the three-dimensional status of human duct with the application of contrast agent fillers in different density,combined with three-dimensional reconstruction technology.It provides an innovative idea and method for constructing three-dimensional model of digital multi-duct specimen,and the ultimate goal is to develop the digitized virtual human and precise medical treatment better and faster.

A rapid micro-magnetic resonance imaging scanning for three-dimensional reconstruction of peripheral nerve fascicles

The most common methods for three-dimensional reconstruction of peripheral nerve fascicles include histological and radiology techniques. Histological techniques have many drawbacks including an enormous manual workload and poor image registration. Micro-magnetic resonance imaging（Micro-MRI）, an emerging radiology technique, has been used to report results in the brain, liver and tumor tissues. However, micro-MRI usage for obtaining intraneural structures has not been reported. The aim of this study was to present a new imaging method for three-dimensional reconstruction of peripheral nerve fascicles by ~1T micro-MRI. Freshly harvested sciatic nerve samples from an amputated limb were divided into four groups. Two different scanning conditions（Mannerist Solution/GD-DTPA contrast agent, distilled water） were selected, and both T1 and T2 phases programmed for each scanning condition. Three clinical surgeons evaluated the quality of the images via a standardized scale. Moreover, to analyze deformation of the two-dimensional image, the nerve diameter and total area of the micro-MRI images were compared after hematoxylin-eosin staining. The results show that rapid micro-MRI imaging method can be used for three-dimensional reconstruction of the fascicle structure. Nerve sample immersed in contrast agent（Mannerist Solution/GD-DTPA） and scanned in the T1 phase was the best. Moreover, the nerve sample was scanned freshly and can be recycled for other procedures. MRI images show better stability and smaller deformation compared with histological images. In conclusion, micro-MRI provides a feasible and rapid method for three-dimensional reconstruction of peripheral nerve fascicles, which can clearly show the internal structure of the peripheral nerve.

Developing an enhanced recovery after surgery program for oncology patients who undergo hip or knee reconstruction surgery

Enhanced recovery after surgery(ERAS)protocols are applied in orthopedic surgery and are intended to reduce perioperative stress by implementing combined evidence-based practices with the cooperation of various health professionals as an interdisciplinary team.ERAS pathways include pre-operative patient counselling,regional anesthesia and analgesia techniques,post-operative pain management,early mobilization and early feeding.Studies have shown improvement in the recovery of patients who followed an ERAS program after hip or knee arthroplasty,compared with those who followed a traditional care approach.ERAS protocols reduce post-operative stress,contribute to rapid recovery,shorten length of stay(LOS)without increasing the complications or readmissions,improve patient satisfaction and decrease the hospital costs.We suggest that the ERAS pathway could reduce the LOS in hospital for patients undergoing total hip replacement or total knee replacement.These programs require good organization and handling by the multidisciplinary team.ERAS programs increase patient's satisfaction due to their active participation which they experience as personalized treatment.The aim of the study was to develop an ERAS protocol for oncology patients who undergo bone reconstruction surgeries using massive endoprosthesis,with a view to improving the surgical outcomes.

Phase Error Compensation of Three-Dimensional Reconstruction Combined with Hilbert Transform

Nonlinear response is an important factor affecting the accuracy of three-dimensional image measurement based on the fringe structured light method.A phase compensation algorithm combined with a Hilbert transform is proposed to reduce the phase error caused by the nonlinear response of a digital projector in the three-dimensional measurement system of fringe structured light.According to the analysis of the influence of Gamma distortion on the phase calculation,the algorithm establishes the relationship model between phase error and harmonic coefficient,introduces phase shift to the signal,and keeps the signal amplitude constant while filtering out the DC component.The phase error is converted to the transform domain,and compared with the numeric value in the space domain.The algorithm is combined with a spiral phase function to optimize the Hilbert transform,so as to eliminate external noise,enhance the image quality,and get an accurate phase value.Experimental results show that the proposed method can effectively improve the accuracy and speed of phase measurement.By performing phase error compensation for free-form surface objects,the phase error is reduced by about 26%,and about 27%of the image reconstruction time is saved,which further demonstrates the feasibility and effectiveness of the method.

Hyper-accuracy three-dimensional reconstruction as a tool for better planning of retroperitoneal liposarcoma resection: A case report

BACKGROUND Well-differentiated liposarcoma is the second most common pathologic type of retroperitoneal sarcoma.It is characterized by a huge mass,but multiple organ invasions are common.Surgery is the only treatment option for potential cure.Hyper-accuracy three-dimensional(3D)reconstruction is widely used in robotic partly nephrectomy owing to its ability to visualize overlapping anatomy.CASE SUMMARY A 54-year-old man was admitted for progressive abdominal distension over the preceding 2 mo.Computed tomography revealed a 32 cm×21 cm×12 cm lipomatous mass.Hyper-accuracy 3D reconstruction was performed because of the complex relationship between the mass and nearby tissue.The patient underwent surgical resection,and the tumor did not recur for over 16 mo.CONCLUSION Hyper-accuracy 3D reconstruction is useful for operative planning owing to its intuitiveness and precise determination of anatomical structures in both tumors and nearby tissues.

Three-Dimensional Reconstruction of Fossil Insects within Their Ecosystems

Objective This work is designed effect and production to improve the quality, visual efficiency of ecological reconstruction of fossil insects by using various three- dimensional software and exploring helpful methodologies and techniques.

Digital measurement of bone tumor volume by CT three-dimensional reconstruction technology

Objective To discuss the measurement of bone tumor volume on the basis of three dimensional images segmentation technology. Methods Twenty patients with lacunar bone tumor from Tianjin Hospital and Tongji Hospital were included in the

Automatic three-dimensional reconstruction based on four-view stereo vision using checkerboard pattern

An automatic three-dimensional(3D) reconstruction method based on four-view stereo vision using checkerboard pattern is presented. Mismatches easily exist in traditional binocular stereo matching due to the repeatable or similar features of binocular images. In order to reduce the probability of mismatching and improve the measure precision, a four-camera measurement system which can add extra matching constraints and offer multiple measurements is applied in this work. Moreover, a series of different checkerboard patterns are projected onto the object to obtain dense feature points and remove mismatched points. Finally, the 3D model is generated by performing Delaunay triangulation and texture mapping on the point cloud obtained by four-view matching. This method was tested on the 3D reconstruction of a terracotta soldier sculpture and the Buddhas in the Mogao Grottoes. Their point clouds without mismatched points were obtained and less processing time was consumed in most cases relative to binocular matching. These good reconstructed models show the effectiveness of the method.

Current trends in three-dimensional visualization and real-time navigation as well as robot-assisted technologies in hepatobiliary surgery

With the continuous development of digital medicine,minimally invasive precision and safety have become the primary development trends in hepatobiliary surgery.Due to the specificity and complexity of hepatobiliary surgery,traditional preoperative imaging techniques such as computed tomography and magnetic resonance imaging cannot meet the need for identification of fine anatomical regions.Imaging-based three-dimensional(3D)reconstruction,virtual simulation of surgery and 3D printing optimize the surgical plan through preoperative assessment,improving the controllability and safety of intraoperative operations,and in difficult-to-reach areas of the posterior and superior liver,assistive robots reproduce the surgeon’s natural movements with stable cameras,reducing natural vibrations.Electromagnetic navigation in abdominal surgery solves the problem of conventional surgery still relying on direct visual observation or preoperative image assessment.We summarize and compare these recent trends in digital medical solutions for the future development and refinement of digital medicine in hepatobiliary surgery.

Three-dimensional reconstruction of human spinal cord based on histological serial sections

BACKGROUND： It is not possible to reconstruct the inner structure of the spinal cord, such as gray matter and spinal tracts, from the Visual Human Project database or CT and MRI databases, due to low image resolution and contrast in macrosection images. OBJECTIVE： To explore a semi-automatic computerized three-dimensional （3D） reconstruction of human spinal cord based on histological serial sections, in order to solve issues such as low contrast. DESIGN, TIME AND SETTING： An experimental study combining serial section techniques and 3D reconstruction, performed in the laboratory of Human Anatomy and Histoembryology at the Medical School of Nantong University during January to April 2008. SETTING： Department of Anatomy, Institute of Neurobiology, Jiangsu Province Key Laboratory of Neural Regeneration, Laboratory of Image Engineering. MATERIALS： A human lumbar spinal cord segment from fresh autopsy material of an adult male. METHODS： After 4% paraformaldehyde fixation for three days, serial sections of the lumbar spinal cord were cut on a Leica cryostat and mounted on slides in sequence, with eight sections aligned separately on each slide. All sections were stained with Luxol Fast Blue to reveal myelin sheaths. After gradient dehydration and clearing, the stained slides were coverslipped. Sections were observed and images recorded under a light microscope using a digital camera. Six images were acquired at x25 magnification and automatically stitched into a complete section image. After all serial images were obtained, 96 complete serial images of the human lumbar cord segment were automatically processed with ＂Curves＂, ＂Autocontrast＂, ＂Gray scale 8 bit＂, ＂Invert＂, ＂Image resize to 50%＂ steps using Photoshop 7.0 software. All images were added in order into 3D-DOCTOR 4.0 software as a stack, where serial images were automatically realigned with neighboring images and semi-automatically segmented for white matter and gray matter. Finally, simple surface and volume reconstruction were completed on a personal computer. The reconstructed human lumbar spinal cord segment was interactively observed, cut, and measured. MAIN OUTCOME MEASURES： The reconstructed human lumbar spinal cord segment. RESULTS： Compared with serial images obtained from other image modalities, such as CT, MRI, and macrosections from The Visual Human Project database, the Luxol Fast Blue stained histological serial section images exhibited higher resolution and contrast between gray and white matter. Image processing and 3D reconstruction steps were semi-automatically performed with related software. The 3D reconstructed human lumbar cord segment were observed, cut, and measured on a PC. CONCLUSION： A semi-automatically computerized method, based on histological serial sections, is an effective way to 3D-reconstruct the human spinal cord.

Three-dimensional(3D) Printing Technology Assisted by Minimally Invasive Surgery for Pubic Rami Fractures

The feasibility of three-dimensional (3D) printing technology cgmbined with minimally invasive surgery in the treatment of pubic rami fractures was explored.From August 2015 to October 2017,a series of 30 patients who underwent surgical stabilization of their anterior pelvic ring (all utilizing the 3D printing technology)by one surgeon at a single hospital were studied.The minimally invasive incisions were made through anterior inferior cilia spine and pubic nodule.Data collected included the operative duration,the blood loss,the damage of the important tissue,the biographic union and therecovery of the function after the operation.Measurements on inlet and outlet pelvic cardiograph were made immediately post-operation and at all follow-up clinic visits.The scores of reduction and function were measured during follow-up.Results showed that the wounds of 30 patients were healed in the first stage,and there was no injury of important structures such as blood vessels and nerves.According to the Matta criteria,excellent effectiveness was obtained in 22 cases and good in 8 cases.According to the functional evaluation criteria of Majeed,excellent effectiveness was obtained in 21 cases and good in 9 cases.It was suggested that the 3D printing technology assisted by minimally invasive surgery can better evaluate the pelvic fracture before operation,which was helpful in plate modeling, and can shorten surgery duration and reduce intraoperative blood loss and complications. The positioning accuracy was improved,and better surgical result was finally achieved.

Use of three-dimensional printing in preoperative planning in orthopaedic trauma surgery: A systematic review and meta-analysis

BACKGROUND With the increasing complexity of surgical interventions performed in orthopaedic trauma surgery and the improving technologies used in threedimensional(3D)printing,there has been an increased interest in the concept.It has been shown that 3D models allow surgeons to better visualise anatomy,aid in planning and performing complex surgery.It is however not clear how best to utilise the technique and whether this results in better outcomes.AIM To evaluate the effect of 3D printing used in pre-operative planning in orthopaedic trauma surgery on clinical outcomes.METHODS We performed a comprehensive systematic review of the literature and a metaanalysis.Medline,Ovid and Embase were searched from inception to February 8,2018.Randomised controlled trials,case-control studies,cohort studies and case series of five patients or more were included across any area of orthopaedic trauma.The primary outcomes were operation time,intra-operative blood loss and fluoroscopy used.RESULTS Seventeen studies(922 patients)met our inclusion criteria and were reviewed.The use of 3D printing across all specialties in orthopaedic trauma surgery demonstrated an overall reduction in operation time of 19.85%[95%confidence intervals(CI):(-22.99,-16.71)],intra-operative blood loss of 25.73%[95%CI:(-31.07,-20.40)],and number of times fluoroscopy was used by 23.80%[95%CI:(-38.49,-9.10)].CONCLUSION Our results suggest that the use of 3D printing in pre-operative planning in orthopaedic trauma reduces operative time,intraoperative blood loss and the number of times fluoroscopy is used.

Three-dimensional visualization and virtual reality simulation role in hepatic surgery:Further research warranted

Artificial intelligence(AI)is the study of algorithms that enable machines to analyze and execute cognitive activities including problem solving,object and word recognition,reduce the inevitable errors to improve the diagnostic accuracy,and decision-making.Hepatobiliary procedures are technically complex and the use of AI in perioperative management can improve patient outcomes as discussed below.Three-dimensional(3D)reconstruction of images obtained via ultrasound,computed tomography scan or magnetic resonance imaging,can help surgeons better visualize the surgical sites with added depth perception.Preoperative 3D planning is associated with lesser operative time and intraoperative complications.Also,a more accurate assessment is noted,which leads to fewer operative complications.Images can be converted into physical models with 3D printing technology,which can be of educational value to students and trainees.3D images can be combined to provide 3D visualization,which is used for preoperative navigation,allowing for more precise localization of tumors and vessels.Nevertheless,AI enables surgeons to provide better,personalized care for each patient.

First Reconstructive Plastic Surgery of the Perineum in a Hominin Pan paniscus (Bonobo) and Plea by a Plastic Surgeon for Surgery for the Benefit of All Hominins (Members of the Human Lineage)

We present, for the first time, the repair by plastic surgery procedures of a large loss of perineal substance in a bonobo (hominin Pan paniscus). A 20-year-old male bonobo living in captivity in the Lola Ya Bonobo Sanctuary in Kinshasa in the Democratic Republic of the Congo was attacked by another bonobo. It was a large perineal wound through which urine flowed, located between the penis and the testicles, taking part of the anterior and posterior urethra, the bladder, as well as the elements of the spermatic duct. To repair the large loss of perineal substance, a pedicled flap of scrotal skin was removed, and then turned over, cutaneous surface on the trench of the loss of bladder substance and the urethral lumen. The postoperative course was satisfactory with healing by the first intention of the surgical wound, despite the wild postoperative behavior of the patient (removal of the vesicourethral catheter and protective plaster). We observed in the short term an urethro-cutaneous fistula, left in natural healing. The reconstructive surgery procedures applied in humans can also be applied with satisfactory results in bonobos, a species in the process of extension and whose members are our closest cousins. The bonobo is genetically close to humans. Based on this first successful experience, we advocate for reconstructive plastic surgery for all hominins (members of the human lineage), if indicated.

Current and future role of three-dimensional modelling technology in rectal cancer surgery:A systematic review

BACKGROUND Three-dimensional(3D)modelling technology translates the patient-specific anatomical information derived from two-dimensional radiological images into virtual or physical 3D models,which more closely resemble the complex environment encountered during surgery.It has been successfully applied to surgical planning and navigation,as well as surgical training and patient education in several surgical specialties,but its uptake lags behind in colorectal surgery.Rectal cancer surgery poses specific challenges due to the complex anatomy of the pelvis,which is difficult to comprehend and visualise.AIM To review the current and emerging applications of the 3D models,both virtual and physical,in rectal cancer surgery。METHODS Medline/PubMed,Embase and Scopus databases were searched using the keywords“rectal surgery”,“colorectal surgery”,“three-dimensional”,“3D”,“modelling”,“3D printing”,“surgical planning”,“surgical navigation”,“surgical education”,“patient education”to identify the eligible full-text studies published in English between 2001 and 2020.Reference list from each article was manually reviewed to identify additional relevant papers.The conference abstracts,animal and cadaveric studies and studies describing 3D pelvimetry or radiotherapy planning were excluded.Data were extracted from the retrieved manuscripts and summarised in a descriptive way.The manuscript was prepared and revised in accordance with PRISMA 2009 checklist.RESULTS Sixteen studies,including 9 feasibility studies,were included in the systematic review.The studies were classified into four categories:feasibility of the use of 3D modelling technology in rectal cancer surgery,preoperative planning and intraoperative navigation,surgical education and surgical device design.Thirteen studies used virtual models,one 3D printed model and 2 both types of models.The construction of virtual and physical models depicting the normal pelvic anatomy and rectal cancer,was shown to be feasible.Within the clinical context,3D models were used to identify vascular anomalies,for surgical planning and navigation in lateral pelvic wall lymph node dissection and in management of recurrent rectal cancer.Both physical and virtual 3D models were found to be valuable in surgical education,with a preference for 3D printed models.The main limitations of the current technology identified in the studies were related to the restrictions of the segmentation process and the lack of 3D printing materials that could mimic the soft and deformable tissues.CONCLUSION 3D modelling technology has potential to be utilised in multiple aspects of rectal cancer surgery,however,it is still at the experimental stage of application in this setting.

The impact of urological resection and reconstruction on patients undergoing cytoreductive surgery (CRS) and hyperthermic intraperitoneal chemotherapy (HIPEC)

Objective:Cytoreductive surgery(CRS)and hyperthermic intraperitoneal chemotherapy(HIPEC)are increasingly being used to treat peritoneal malignancies.Urological resections and reconstruction(URR)are occasionally performed during the surgery.We aim to evaluate the impact of these procedures on peri-operative outcomes of CRS and HIPEC patients.Methods:A retrospective review of a prospectively maintained database of all patients who underwent CRS-HIPEC from April 2001 to February 2016 was performed.Outcomes between patients who had surgery involving,and not involving URR were compared.Primary outcomes were the rate of major complications and the duration of stay in the intensive care unit(ICU)and hospital.Secondary outcomes were that of overall survival(OS)and prognostic factors that would indicate a need for URR.Results:A total of 214 CRS-HIPEC were performed,21 of which involved a URR.Baseline clinical characteristics did not vary between the groups(URR vs.No URR).Urological resections comprised of 52%bladder resections,24%ureteric resections,and 24%involving both bladder and ureteric resections.All bladder defects were closed primarily while ureteric reconstructions consisted of two end-to-end anastomoses,one ureto-uretostomy,five direct implantations into the bladder and three boari flaps.URR were more frequently required in patients with colorectal peritoneal disease(p Z 0.029),but was not associated with previous pelvic surgery(76%vs.54%,p Z 0.065).Patients with URR did not suffer more serious complications(14%vs.24%,p Z 0.42).ICU(2.2 days vs.1.4 days,p Z 0.51)and hospital stays(18 days vs.25 days,p Z 0.094)were not significantly affected.Undergoing a URR did not affect OS(p Z 0.99),but was associated with increased operation time(570 min vs.490 min,p Z 0.046).Conclusion:While concomitant URR were associated with an increase in operation time,there were no significant differences in postoperative complications or OS.Patients with colorectal peritoneal metastases are more likely to require a URR compared to other primary tumours,and needs to be considered during pre-operative planning.

Three-dimensional printing in paediatric orthopaedic surgery

Three-dimensional(3D)printing is a rapidly evolving and promising field to improve outcomes of orthopaedic surgery.The use of patient-specific 3D-printed models is specifically interesting in paediatric orthopaedic surgery,as limb deformity corrections often require an individual 3D treatment.In this editorial,various operative applications of 3D printing in paediatric orthopaedic surgery are discussed.The technical aspects and the imaging acquisition with computed tomography and magnetic resonance imaging are outlined.Next,there is a focus on the intraoperative applications of 3D printing during paediatric orthopaedic surgical procedures.An overview of various upper and lower limb deformities in paediatrics is given,in which 3D printing is already implemented,including posttraumatic forearm corrections and proximal femoral osteotomies.The use of patient-specific instrumentation(PSI)or guiding templates during the surgical procedure shows to be promising in reducing operation time,intraoperative haemorrhage and radiation exposure.Moreover,3D-printed models for the use of PSI or patient-specific navigation templates are promising in improving the accuracy of complex limb deformity surgery in children.Lastly,the future of 3D printing in paediatric orthopaedics extends beyond the intraoperative applications;various other medical applications include 3D casting and prosthetic limb replacement.In conclusion,3D printing opportunities are numerous,and the fast developments are exciting,but more evidence is required to prove its superiority over conventional paediatric orthopaedic surgery.