The three-dimensional structure and seasonal variation of the North Pacific meridional overturning circulation

The three-dimensional structure and the seasonal variation of the North Pacific meridional overturning circulation （NPMOC） are analyzed based on the Simple Ocean Data Assimilation data and Argo profiling float data. The NPMOC displays a multi-cell structure with four cells in the North Pacific altogether. The TC and the STC are a strong clockwise meridional cell in the low latitude ocean and a weaker clockwise meridional cell between 7°N and 18°N, respectively, while the DTC and the subpolar cell are a weaker anticlockwise meridional cell between 3°N and 15°N and a weakest anticlockwise meridional cell between 35°N and 50°N, respectively. The DTC, the TC and the STC are all of very strong seasonal variations. As to the DTC, the southward transport is strongest in fall and weakest in spring. For the TC, the northward transport is strongest in winter and weakest in spring, while the southward transport is strongest in fall and weakest in spring, which is associated with the strong southward fiow of the DTC in fall. As the STC, the northward transport is strongest in winter and weakest in summer, while the southward transport is strongest in summer and weakest in spring. This seasonal difference may be associated with the DTC. The zonal wind stress and the east-west slope of sea level play important roles in the seasonal variations of the TC, the STC and the DTC.

Observed spatiotemporal variation of three-dimensional structure and heat/salt transport of anticyclonic mesoscale eddy in Northwest Pacific

As in-situ observations are sparse,targeted observations of a specific mesoscale eddy are rare.Therefore,it is difficult to study the three-dimensional structure of moving mesoscale eddies.From April to September 2014,an anticyclonic eddy located at 135°E-155°E,26°N-42°N was observed using 17 rapidsampling Argo floats,and the spatiotemporal variations in the three-dimensional structure were studied.The results are as follows:(1)the eddy was identified and tracked using satellite altimeter data.It had a lifetime of 269 days and an average radius of 91.5 km.The lifetime of the eddy can be divided into three phases,i.e.,the initiation,maturity,and termination phases.The depth of its influence reached 1000 m;(2)the Argo profiles were divided into seven periods(approximately 20 days in each)for composite analysis,and the composite Argo profiles and CARS2009(CSIRO Atlas of Regional Seas)climatology data were merged following the data-interpolating variational analysis(DIVA)method to reconstruct the three-dimensional structure.The temperature and salinity anomaly cores of the anticyclonic mesoscale eddy are located from 400 to 600 m.From 800 to 900 m,there is an area of low salinity at the center of the eddy.A high concentration anomaly of dissolved oxygen was located at approximately 250 m;(3)to better understand the features of the eddy and its interaction with the surroundings,we calculated the anomalous velocity of the geostrophic flow and the heat,salt,dissolved oxygen transport anomaly,and discussed the eddy's origin and its adjustments to topography.The maximum heat,salt,and oxygen transport caused by eddy were 9.37×10^11 W,3.08×10^3 kg/s,and 2.70×10^2 kg/s,which all occurred during the termination phase.This study highlights the applicability of using Argo floats to understand the three-dimensional structure thermohaline features of eddies in the North Pacific.

The Shengli I Point Bar on the Yellow River Delta: Three-Dimensional Structures and Their Evolution

Point bars are well developed on the Yellow River delta, an~ which theShengli I point bar is the most typical. The point bar, being about 4 km in length and several tensto more than 100 meters in width, is located on the south side of the Shengli Bridge in KenliCounty, Dongying, Shandong. It is a typical fine-grained point bar with silt, which is predominant,some clay and minor plant debris and clay boulders. The Shengli I Point bar has complicated 3-Dstructures. Firstly, in a plane view, it comprises mainly eight sedimentary units, bar edge, baredge, bar platform, bar plain, bar channel, bar gully, bar pond and bar bay, developing side by sideand superimposed one by one m a complex way. Secondly, its vertical structures are very complex dueto the partial superimposition of the 8 sedimentary units. Besides hydatogenesis, very intensivewind erosion, eolian, ice and meltwater actions are also visible on the Shengli I point bar. Thecomplex form is made even more complicated because of the above co-actions.

Three-dimensional structure of an observed cyclonic mesoscale eddy in the Northwest Pacific and its assimilation experiment

Mesoscale eddies play an important role in modulating the ocean circulation.Many previous studies on the threedimensional structure of mesoscale eddies were mainly based on composite analysis,and there are few targeted observations for individual eddies.A cyclonic eddy surveyed during an oceanographic cruise in the Northwest Pacific Ocean is investigated in this study.The three-dimensional structure of this cyclonic eddy is revealed by observations and simulated by the four-dimensional variational data assimilation(4 DVAR)system combined with the Regional Ocean Modeling System.The observation and assimilation results together present the characteristics of the cyclonic eddy.The cold eddy has an obvious dual-core structure of temperature anomaly.One core is at 50–150 m and another is at 300–550 m,which both have the average temperature anomaly of approximately-3.5℃.The salinity anomaly core is between 250 m and 500 m,which is approximately-0.3.The horizontal velocity structure is axis-asymmetric and it is enhanced on the eastern side of the cold eddy.In the assimilation experiment,sea level anomaly,sea surface temperature,and in situ measurements are assimilated into the system,and the results of assimilation are close to the observations.Based on the high-resolution assimilation output results,the study also diagnoses the vertical velocity in the mesoscale eddy,which reaches the maximum of approximately 10 m/d.The larger vertical velocity is found to be distributed in the range of 0.5 to 1 time of the normalized radius of the eddy.The validation of the simulation result shows that the 4 DVAR method is effective to reconstruct the three-dimensional structure of mesoscale eddy and the research is an application to study the mesoscale eddy in the Northwest Pacific by combining observation and assimilation methods.

Demonstration of the refined three-dimensional structure of mesoscale eddies and computational error estimates via Lagrangian analysis

In previous studies,Lagrangian analyses were used to assess large-scale ocean circulation,and the Lagrangian coherent structure could also reveal the evolution of the two-dimensional structure of the mesoscale eddies.However,few studies have demonstrated the three-dimensional structure of the mesoscale eddies via Lagrangian analysis.Compared with previous studies,which investigated the eddy structure via a Eulerian view,we used a Lagrangian view to provide a different perspective to study the eddy structure.An idealized cyclonic mesoscale eddy is built up over a seamount,and it presents downwelling inside the eddy and upwelling alongside the eddy formed within a closed circulation system.This structure is difficult to display via a Eulerian analysis.However,the trajectories of particles can well demonstrate the full cycle:the fluid sank and rotated inside the eddies,converged to the upwelling zone of the bottom layer and returned to the surface through upwelling.We also applied a Lagrangian analysis to a realistic simulation.As a significant phenomenon in the South China Sea,the dipole structure of the anticyclonic eddy(AE)/cyclonic eddy(CE)pair off of central Vietnam has been well studied but mainly at the sea surface.With a Lagrangian analysis,we illustrate the three-dimensional structure of the eddy pair:the fluid sank(rose)and rotated inside the AE(CE).More importantly,the trajectories of the particles suggested that there was no fluid exchange between the two eddies since the strong boundary jet separates them from each other.All the conclusions above have been verified and are supported by the computational error estimate.With a selected time step and integral period,the computational errors always present small values,although they increase with strong divergent and vertical diffusive flow.

Analysis on Three-dimensional Structure and Echo Characteristic Quantity of a Supercell Storm

[Objective] The research aimed to study three-dimensional structure and echo characteristic quantity of a supercell storm in central Gansu on May 30,2005.[Method] By monitoring data of Lanzhou CINRAD/CC Doppler radar,the three-dimensional structure characteristics of a rare supercell storm which happened in central Gansu on May 30,2005 were analyzed.We tried to reveal three-dimensional structure and echo characteristic index of supercell storm in the northeast of Qinghai-Tibet Plateau,and find reason of rare heavy hail appearance.[Result] The large-scale strong storm was formed by the common effect of Mongolia cold vortex,low-level jet and ground cold front.When the development of main echo was mature,on reflectivity factor map,it presented obvious inverted 'V' shaped structure in left front of low-level storm,typical hooked and 'person'-type echo characteristics in the right rear.The bounded weak echo zone(vault) in low level corresponded with strong echo overhanging body in high level.It surpassed 60 dBz in the strong reflectivity factor zone.It presented one weak meso-cyclone on corresponding radial velocity map.The jumped increase characteristic of VIL could be as one of indices for judging that hail started to grow.Almost all storms(VILD ≥4.0 g/m3) had more obvious indication significance than VIL for judging heavy hail(diameter ≥20 mm).[Conclusion] The research provided reference for nowcasting of strong convection weather and artificial hail suppression.

Two-dimensional nanosheets as building blocks to construct three-dimensional structures for lithium storage

2D nanosheets such as graphene, silicene, phosphorene, metal dichalcogenides and MXenes are emerging and promising for lithium storage due to their ultrathin nature and corresponding chemical/physical properties. However, the serious restacking and aggregation of the 2D nanosheets are still hampering their applications. To circumvent the issues of 2D nanosheets, one efficient strategy is to construct 3D structures with hierarchical porous structures, good chemical/mechanical stabilities and tunable electrical conductivities. In this review, we firstly focus on the available synthetic approaches of 3D structures from 2D nanosheets, and then summarize the relationships between the microstructures of 3D structures built from 2D nanosheets and their electrochemical behaviors for lithium storage. On the basis of above results, some challenges are briefly discussed in the perspective of the development of various functional 3D structures.

Effects of Three-dimensional Structure of Vegetation on Particle Size Distribution and Nutrient Content of Water-eroded Red Soil

Based on the vertical stratification type of vegetation in the 48 plots （15m×15 m） in Hetian Town, Changting County, Fujian Province, this study was conduct ed to determine the overall vegetation fractional coverage （VFC）, litter thickness, soi particle size distribution and nutrient content at different vertical level, analyze the correlations between vegetation characters and soil properties, and compare the dif ferences in the VFC, litter thickness, soil particle size distribution and nutrient con- tent among different erosion degrees and vertical structure types. The result., showed that the VFC and litter thickness were all negatively related to erosion de gree; they were positively related to soil organic matter content, total nitrogen con- tent and total phosphorus content, but not significantly correlated with soil tota potassium content. When the VFC was higher than 50% and litter thickness wa.＇ higher than 20 ram, the water and soil could be effectively conserved; and the plan litter showed better water and soil conservation effect than the upper vegetation o~ canopy layer. In the vertical structure types of different vegetations, the forest-shrub grass, forest-shrub, shrub-grass and pure grass all could promote vegetation growth improve soil structure and maintain soil fertility.

Three-dimensional Structure of Rice Dwarf Virus by Electron Cryomicroscopy

The three-dimensional(3D)structure of intact rice dwarf virus(RDV)has been deter-mined to 2.6 nm resolution by 400kV electron cryomicroscopy and computer reconstructiontechniques.The intact virion of 69.8 nm in diameter was seen to be made up of an outer shellof 6.9 nm in thickness and an inner shell of 2.5 nm in thickness at a diameter of 54 nm.Theouter shell surface forms a T=13 icosahedral lattice with holes at 5-and 6-coordinated posi-tions.The 780 capsomeres at local 3-fold positions appear trimeric.The interface betweenthese two shells could be clearly delineated and the interaction was maintained by a cylindri-cal density whose upper domain connects subunits of the trimeric capsomeres by an interlock-ing mechanism.The 3D structure of inner shell was also reconstructed to 3.3 nm from100kV images of purified inner shell particles,confirming our interpretation of the multilayerstructure of intact RDV.

Quantitative Structure Activity Relationship Studies of Benzoxazinone Derivative Antithrombotic Drug Using New Three-dimensional Structure Descriptors

A novel three-dimensional holographic vector of atomic interaction field（3D-HoVAIF） was used to describe the chemical structures of 23 benzoxazinone derivatives as antithrombotic drugs.Here a quantitative structure activity relationship（QSAR） model was built by partial least-squares（PLS） regression.The estimation stability and prediction ability of the model were strictly analyzed by both internal and external validations.The correlation coefficients of established PLS model,leave-one-out（LOO） cross-validation,and predicted values versus experimental ones of external samples were R2=0.899,RCV2=0.854 and Qext2=0.868,respectively.These values indicated that the built PLS model had both favorable estimation stability and good prediction capabilities.Furthermore,the satisfactory results showed that 3D-HoVAIF could preferably express the information related to the biological activity of benzoxazinone derivatives.

Three-dimensional structure of axonal mitochondria reflects the age of drosophila

This study aimed to reconstruct a three-dimensional map of axonal mitochondria using Fiji and Neurolucida software, and to observe directly the morphology and distribution of mitochondria in axons of motor neurons in dorsal longitudinal flight muscles of drosophila aged 5 days and 20 days, using electron microscopy. Results indicated that there was no difference in the total area and volume of mitochondria between 5-day-old drosophila and 20-day-old drosophila in all sections, but the ratio of mitochondrial total areas to axon total areas, as well as mitochondrial density of 20-day-old drosophila, was lower than that of 5-day-old drosophila. The number of mitochondria, whose volume was less than 1 000 000 IJm3, and between 1 000 000 pm3 and 10 000 000 pm3, was higher in 20-day-old drosophila than that in 5-day-old drosophila. The number of mitochondria with a volume between 1 000 000 pm3 and 100 000 000 IJm3 was apparently higher than those with a volume less than 1 000 000 t.lm3 or larger than 100 000 000 IJm3. In addition, the number of mitochondria with a volume more than 100 000 000 tJm3 was small; however, the volume was nearly 70% of the total volume in both 5-day-old and 20-day-old drosophila. In contrast, the number of mitochondria with a volume between 1 000 000 t.Jm3 and 10 000 000 IJm3 was large, but the volume was less than 30% of the total volume. These experimental findings suggest that changes in mitochondrial morphology and number in motor neurons from the dorsal longitudinal muscle of drosophila are present during different ages.

Lithological Characterization and Its Application Based on Three-Dimensional Structure-Coupled Joint Inversion of Gravity and Magnetic Data

Incorporating structural-coupling constraint, known as the cross-gradients criterion, helps to improve the focussing trend in cross-plot of multiple physical properties. Based on this feature, a?post-processing technique is studied to characterize the lithological types of subsurface geological materials after joint inversion. A simple domain transform, which converts two kinds of participant physical properties into an artificial complex array, is adopted to extract anomalies manually from homogenous host rock. A synthetic example shows that structure-coupled joint inverted results tend to concentrate on the feature trends in the cross-plot, and the main geological targets are recovered well by a radius-azimuth plot. In a field data example, the lithological characterization?reveals that the main rock types interpreted in the study area agree with the geological information, thus demonstrating the feasibility of this technique.

Study of three-dimensional spatial diffuse discharge in contact electrode structure applied to air purification

In this work,based on the role of pre-ionization of the non-uniform electric field and its effect of reducing the collisional ionization coefficient,a diffuse dielectric barrier discharge plasma is formed in the open space outside the electrode structure at a lower voltage by constructing a three-dimensional non-uniform spatial electric field using a contact electrode structure.The air purification study is also carried out.Firstly,a contact electrode structure is constructed using a three-dimensional wire electrode.The distribution characteristics of the spatial electric field formed by this electrode structure are analyzed,and the effects of the non-uniform electric field and the different angles of the vertical wire on the generation of three-dimensional spatial diffuse discharge are investigated.Secondly,the copper foam contact electrode structure is constructed using copper foam material,and the effects of different mesh sizes on the electric field distribution are analyzed.The results show that as the mesh size of the copper foam becomes larger,a strong electric field region exists not only on the surface of the insulating layer,but also on the surface of the vertical wires inside the copper foam,i.e.,the strong electric field region shows a three-dimensional distribution.Besides,as the mesh size increases,the area of the vertical strong electric field also increases.However,the electric field strength on the surface of the insulating layer gradually decreases.Therefore,the appropriate mesh size can effectively increase the discharge area,which is conducive to improving the air purification efficiency.Finally,a highly permeable stacked electrode structure of multilayer wire-copper foam is designed.In combination with an ozone treatment catalyst,an air purification device is fabricated,and the air purification experiment is carried out.

Three-dimensional thermohaline structure estimation derived from HY-2 satellite data over the Maritime Silk Road and its applications

Estimated ocean subsurface fields derived from satellite observations provide potential data sources for operational marine environmental monitoring and prediction systems.This study employs a statistic regression reconstruction method,in combination with domestic autonomous sea surface height and sea surface temperature observations from the Haiyang-2(HY-2)satellite fusion data,to establish an operational quasi-realtime three-dimensional(3D)temperature and salinity products over the Maritime Silk Road.These products feature a daily temporal resolution and a spatial resolution of 0.25°×0.25°and exhibit stability and continuity.We have demonstrated the accuracy of the reconstructed thermohaline fields in capturing the 3D thermohaline variations through comprehensive statistical evaluations,after comparing them against Argo observations and ocean analysis data from 2022.The results illustrate that the reconstructed fields effectively represent seasonal variations in oceanic subsurface structures,along with structural changes resulting from mesoscale processes,and the upper ocean’s responses to tropical cyclones.Furthermore,the incorporation of HY-2 satellite observations notably enhances the accuracy of temperature and salinity reconstructions in the Northwest Pacific Ocean and marginally improves salinity reconstruction accuracy in the North Indian Ocean when compared to the World Ocean Atlas 2018 monthly climatology thermohaline fields.As a result,the reconstructed product holds promise for providing quasi-real-time 3D temperature and salinity field information to facilitate fast decisionmaking during emergencies,and also offers foundational thermohaline fields for operational ocean reanalysis and forecasting systems.These contributions enhance the safety and stability of ocean subsurface activities and navigation.

A three-dimensional co-continuous network structure polymer electrolyte with efficient ion transport channels enabling ultralong-life all solid-state lithium metal batteries

Solid polymer electrolytes(SPEs)have emerged as one of the most promising candidates for the construction of solid-state lithium batteries due to their excellent flexibility,scalability,and interface compatibility with electrodes.Herein,a novel all-solid polymer electrolyte(PPLCE)was fabricated by the copolymer network of liquid crystalline monomers and poly(ethylene glycol)dimethacrylate(PEGDMA)acts as a structural frame,combined with poly(ethylene glycol)diglycidyl ether short chain interspersed serving as mobile ion transport entities.The preparaed PPLCEs exhibit excellent mechanical property and out-standing electrochemical performances,which is attributed to their unique three-dimensional cocontinuous structure,characterized by a cross-linked semi-interpenetrating network and an ionic liquid phase,resulting in a distinctive nanostructure with short-range order and long-range disorder.Remarkably,the addition of PEGDMA is proved to be critical to the comprehensive performance of the PPLCEs,which effectively modulates the microscopic morphology of polymer networks and improves the mechanical properties as well as cycling stability of the solid electrolyte.When used in a lithiumion symmetrical battery configuration,the 6 wt%-PPLCE exhibites super stability,sustaining operation for over 2000 h at 30 C,with minimal and consistent overpotential of 50 mV.The resulting Li|PPLCE|LFP solid-state battery demonstrates high discharge specific capacities of 160.9 and 120.1 mA h g^(-1)at current densities of 0.2 and 1 C,respectively.Even after more than 300 cycles at a current density of 0.2 C,it retaines an impressive 73.5%capacity.Moreover,it displayes stable cycling for over 180 cycles at a high current density of 0.5C.The super cycle stability may promote the application for ultralong-life all solid-state lithium metal batteries.

COATS:Comprehensive observation on the atmospheric boundary layer three-dimensional structure during haze pollution in the North China Plain

The North China Plain(NCP)is troubled by severe haze pollution and the evolution of haze pollution is closely related to the atmospheric boundary layer(ABL).However,experimental and theoretical studies on the physical-chemical processes of the ABL in the NCP are lacking,with many scientific problems to be addressed.To solve these problems,the Comprehensive Observation on the Atmospheric boundary layer Three-dimensional Structure(COATS)during haze pollution was carried out in the NCP from 2016 to 2020.The COATS experiment adopted a"point-line-surface"spatial layout,obtaining both spatial-temporal profiles of the meteorological and environmental elements in the ABL and the turbulent transport data of fine particulate matter(PM_(2.5))in winter and summer.The research achievements are as follows.The spatial-temporal distribution characteristics of the ABL structure and PM_(2.5)concentrations in NCP were determined.The typical thermal structure of persistent heavy haze events and the pollutant removal mechanism by low-level jets were revealed.It was determined that the spatial structure of the ABL adjusted by the Taihang Mountains is responsible for the heterogeneous distribution of haze pollution in the NCP,and that mountain-induced vertical circulations can promote the formation of elevated pollution layers.The restraints of the atmospheric internal boundaries on horizontal diffusion of pollutants were emphasized.The contribution of the ABL to haze pollution in winter and summer was qualitatively compared and quantitatively estimated.The turbulent transport nature behind the relationship between the atmospheric boundary layer height(ABLH)and surface PM_(2.5)concentrations was analyzed.The concept of"aerosol accumulation layer"was defined,and the applicability of the material method in determining ABLH was clarified.A measurement system for obtaining the turbulent flux of PM_(2.5)concentrations was developed,and the turbulence characteristics of PM_(2.5)concentrations were demonstrated.The COATS experiment is of great theoretical significance for thoroughly understanding the physical mechanisms of the ABL during haze pollution and filling the knowledge gap on the impacts of the ABL three-dimensional structure on haze pollution.The results of this study are conducive to the improvement and development of ABL parameterization schemes and serve as a scientific basis for formulating regional pollution prevention and control measures.

Three-dimensional structural models,evolution and petroleum geological significances of transtensional faults in the Ziyang area,central Sichuan Basin,SW China

With drilling and seismic data of Transtensional(strike-slip)Fault System in the Ziyang area of the central Sichuan Basin,SW China plane-section integrated structural interpretation,3-D fault framework model building,fault throw analyzing,and balanced profile restoration,it is pointed out that the transtensional fault system in the Ziyang 3-D seismic survey consists of the northeast-trending F_(I)19 and F_(I)20 fault zones dominated by extensional deformation,as well as 3 sets of northwest-trending en echelon normal faults experienced dextral shear deformation.Among them,the F_(I)19 and F_(I)20 fault zones cut through the Neoproterozoic to Lower Triassic Jialingjiang Formation,presenting a 3-D structure of an“S”-shaped ribbon.And before Permian and during the Early Triassic,the F_(I)19 and F_(I)20 fault zones underwent at least two periods of structural superimposition.Besides,the 3 sets of northwest-trending en echelon normal faults are composed of small normal faults arranged in pairs,with opposite dip directions and partially left-stepped arrangement.And before Permian,they had formed almost,restricting the eastward growth and propagation of the F_(I)19 fault zone.The F_(I)19 and F_(I)20 fault zones communicate multiple sets of source rocks and reservoirs from deep to shallow,and the timing of fault activity matches well with oil and gas generation peaks.If there were favorable Cambrian-Triassic sedimentary facies and reservoirs developing on the local anticlinal belts of both sides of the F_(I)19 and F_(I)20 fault zones,the major reservoirs in this area are expected to achieve breakthroughs in oil and gas exploration.

Effect of Weft Binding Structure on Compression Properties of Three-Dimensional Woven Spacer Fabrics and Composites

With the wide use of three-dimensional woven spacer composites(3DWSCs),the market expects greater mechanical properties from this material.By changing the weft fastening method of the traditional I-shape pile yarns,we designed three-dimensional woven spacer fabrics(3DWSFs)and 3DWSCs with the weft V-shape to improve the compression performance of traditional 3DWSFs.The effects of weft binding structures,V-pile densities,and V-shaped angle were investigated in this paper.It is found that the compression resistance of 3DWSFs with the weft V-shape is improved compared to that with the weft I-shape,the fabric height recovery rate is as high as 95.7%,and the average elastic recovery rate is 59.39%.When the interlayer pile yarn density is the same,the weft V-shaped and weft I-shaped 3DWSCs have similar flatwise pressure and edgewise pressure performance.The compression properties of the composite improve as the density of the V-pile yarns increases.The flatwise compression load decreases as the V-shaped angle decreases.When the V-shaped angle is 28°and 42°,the latitudinal V-shaped 3DWSCs perform exceptionally well in terms of anti-compression cushioning.The V-shaped weft binding method offers a novel approach to structural design of 3DWSCs.

Three-Dimensional Climatological Structures of the Arabian Sea Eddies and Eddy-Induced Flux

This study explores the spatial structure and transport characteristics of eddies in the Arabian Sea(AS)using Argo profiles and satellite measurements.The majority of eddies occur in the northern AS,especially along its northeastern boundary.In contrast,the western AS had a relatively higher eddy kinetic energy compared to the eastern part.Particularly,the strongest energetic eddies were present in the Somali Current system.The composite results revealed the evident thermohaline anomalies caused by cyclonic eddies(CEs)and anticyclonic eddies(AEs)in the upper 300m layers.The anomalous temperature structure within CEs and AEs showed a dominant dipole structure in the near-surface layer and a monopole structure below,with maximum temperature anomalies of approximately−0.8℃and+1.0℃located at depths of 100–150m,respectively.The composited salinity structures for CEs and AEs exhibited monopole vertical structures and sandwich-like patterns.For AEs,large positive salinity anomalies occurred at subsurface layers of 60–180 m with a peak value of about 0.07,and weak negative values were observed above 60m and below 180 m.A similar vertical structure but with an opposite sign operates for CEs.The composited CE and AE caused an equatorward salt flux with values of−8.1×10^(4)and−2.2×10^(4)kg s^(−1),respectively.CEs caused an equatorward heat flux of−7.7×10^(11)W,and AEs induced a poleward flux of 1.5×1011 W.

Three-dimensional S-wave velocity structure of the upper crust in the Guangdong-Hong Kong-Macao Greater Bay Area:insights into the basins structure and genesis of hot springs

As one of the four largest bay areas with strong economic activities in the world,the Guangdong-Hong Kong-Macao Greater Bay Area(GHMGBA)is located in the zone of interaction between the South China Block(SCB)and the South China Sea(SCS).Under the influence of complex geologic evolution,basin-range structures,fault systems and hot springs are well developed here.However,the characteristics of geological structures and the genetic mechanism of these geological phenomena are still unclear.Therefore,we performed ambient noise tomography to obtain 3-D upper crust(0-7.5 km)S-wave velocity structures of the GHMGBA by using 40-day continuous waveform data from 130 seismic stations in the GHMGBA.Our results show that sedimentary basins in the GHMGBA are mainly characterized by low-velocity anomalies.S-wave velocities of sediment formation in basins are about 2.8-3.1 km/s.Rapid changes in velocity appear at the edges of the basins,which correspond to the NE-,NEE-,and NW-trending faults,indicating prominent basin-controlling effects of the faults.The Sanshui Basin(SSB),the largest in the GHMGBA,has a developmental depth of about 4 km,and there is a significant difference in velocity gradient between the east and west sides of the basin,indicating that SSB has experienced east-west asymmetric expansion.Moreover,there are prominent low-velocity anomalies at a depth of about 4.5 km beneath the hot springs at the west of the Zhujiang(Pearl)River estuary(ZRE).We infer that the low-velocity anomalies are fluid reservoirs of the hot springs,which lead to the development of the hot springs on the surface.In addition,the distribution of main cities in the GHMGBA shows a spatial correlation with low-velocity areas at shallow depths(<3 km).The population development trend in the GHMGBA in the past 20 years is also mainly concentrated in the structural province of relatively low-velocity.In combination with the GHMGBA basin structures and drainage distribution characteristics,we suggest that the basic geological environment to some extent affects the habitability of the human settlement and thus determines the distribution and development trend of the main urban context.We believe that the 3-D S-wave velocity structure of the upper crust of the GHMGBA obtained in this study,as well as the deep structural characteristics of the basins and hot springs,will provide support to urban construction planning and geological hazards research of the GHMGBA.