A New Regularized Minimum Error Thresholding Method

To overcome the shortcoming that the traditional minimum error threshold method can obtain satisfactory image segmentation results only when the object and background of the image strictly obey a certain type of probability distribution,one proposes the regularized minimum error threshold method and treats the traditional minimum error threshold method as its special case.Then one constructs the discrete probability distribution by using the separation between segmentation threshold and the average gray-scale values of the object and background of the image so as to compute the information energy of the probability distribution.The impact of the regularized parameter selection on the optimal segmentation threshold of the regularized minimum error threshold method is investigated.To verify the effectiveness of the proposed regularized minimum error threshold method,one selects typical grey-scale images and performs segmentation tests.The segmentation results obtained by the regularized minimum error threshold method are compared with those obtained with the traditional minimum error threshold method.The segmentation results and their analysis show that the regularized minimum error threshold method is feasible and produces more satisfactory segmentation results than the minimum error threshold method.It does not exert much impact on object acquisition in case of the addition of a certain noise to an image.Therefore,the method can meet the requirements for extracting a real object in the noisy environment.

Neutron-gamma discrimination method based on blind source separation and machine learning

The discrimination of neutrons from gamma rays in a mixed radiation field is crucial in neutron detection tasks.Several approaches have been proposed to enhance the performance and accuracy of neutron-gamma discrimination.However,their performances are often associated with certain factors,such as experimental requirements and resulting mixed signals.The main purpose of this study is to achieve fast and accurate neutron-gamma discrimination without a priori information on the signal to be analyzed,as well as the experimental setup.Here,a novel method is proposed based on two concepts.The first method exploits the power of nonnegative tensor factorization(NTF)as a blind source separation method to extract the original components from the mixture signals recorded at the output of the stilbene scintillator detector.The second one is based on the principles of support vector machine(SVM)to identify and discriminate these components.In addition to these two main methods,we adopted the Mexican-hat function as a continuous wavelet transform to characterize the components extracted using the NTF model.The resulting scalograms are processed as colored images,which are segmented into two distinct classes using the Otsu thresholding method to extract the features of interest of the neutrons and gamma-ray components from the background noise.We subsequently used principal component analysis to select the most significant of these features wich are used in the training and testing datasets for SVM.Bias-variance analysis is used to optimize the SVM model by finding the optimal level of model complexity with the highest possible generalization performance.In this framework,the obtained results have verified a suitable bias–variance trade-off value.We achieved an operational SVM prediction model for neutron-gamma classification with a high true-positive rate.The accuracy and performance of the SVM based on the NTF was evaluated and validated by comparing it to the charge comparison method via figure of merit.The results indicate that the proposed approach has a superior discrimination quality(figure of merit of 2.20).

FaultMonitoring Strategy for PV System Based on I-V Feature Library

Long-term use in challenging natural conditions is possible for photovoltaic modules,which are extremely prone to failure.Failure to diagnose and address faults in Photovoltaic(PV)power systems in a timely manner can cause permanent damage to PV modules and,in more serious cases,fires.Therefore,research into photovoltaic module defect detection techniques is crucial for the growth of the photovoltaic sector as well as for maintaining national economic prosperity and ensuring public safety.Considering the drawbacks of the current real-time and historical data-based methods for monitoring distributed PV systems,this paper proposes a method for monitoring PV systems at the module or string level that can be achieved by monitoring only electrical signals.The approach doesn’t need a lot of tests to get the operational data of PV modules beforehand and only requires theoretical feature libraries of PV modules through panel parameter calculations.The present operating conditions and the open-circuit and short-circuit faults can be precisely identified by comparing the observed open-circuit voltage and short-circuit current with the corresponding data in the theoretical feature library.After that,by comparing the measured maximum power point voltage and current with the corresponding data in the theoretical feature library through the threshold method,aging and shadowing faults can be accurately determined.Experimental testing was done to see whether the suggested method was effective.The results show that the proposed technique is able to diagnose open-circuit faults,short-circuit faults,aging faults,and shadowing faults with shadow occlusion above 20%.

Dual threshold search method for asperity boundary determination based on geodetic and seismic catalog data

As an important model for explaining the seismic rupture mode,the asperity model plays an important role in studying the stress accumulation of faults and the location of earthquake initiation.Taking Qilian-Haiyuan fault as an example,this paper combines geodetic method and b-value method to propose a multi-source observation data fusion detection method that accurately determines the asperity boundary named dual threshold search method.The method is based on the criterion that the b-value asperity boundary should be most consistent with the slip deficit rate asperity boundary.Then the optimal threshold combination of slip deficit rate and b-value is obtained through threshold search,which can be used to determine the boundary of the asperity.Based on this method,the study finds that there are four potential asperities on the Qilian-Haiyuan fault:two asperities(A1 and A2)are on the Tuolaishan segment and the other two asperities(B and C)are on Lenglongling segment and Jinqianghe segment,respectively.Among them,the lengths of asperities A1 and A2 on Tuolaishan segment are 17.0 km and 64.8 km,respectively.And the lower boundaries are 5.5 km and 15.5 km,respectively;The length of asperity B on Lenglongling segment is 70.7 km,and the lower boundary is 10.2 km.The length of asperity C on Jinqianghe segment is 42.3 km,and the lower boundary is 8.3 km.

A classification method of building structures based on multi-feature fusion of UAV remote sensing images

In order to improve the accuracy of building structure identification using remote sensing images,a building structure classification method based on multi-feature fusion of UAV remote sensing image is proposed in this paper.Three identification approaches of remote sensing images are integrated in this method:object-oriented,texture feature,and digital elevation based on DSM and DEM.So RGB threshold classification method is used to classify the identification results.The accuracy of building structure classification based on each feature and the multi-feature fusion are compared and analyzed.The results show that the building structure classification method is feasible and can accurately identify the structures in large-area remote sensing images.

Detection of 3D Human Posture Based on Improved Mediapipe

Based on the continuous development of motion capture technology for ordinary video images, unmarked optical motion capture has become the fastest human posture recognition technology. Compared with other technical products, Google’s 3D human body recognition framework—Mediapipe is the most mature representative in this field. However, Mediapipe also has many defects in the detection of 3D human posture. In this paper, firstly, to solve the problem of inaccurate detection of human posture by Mediapipe, the accuracy of 2D human posture detection is improved through the speed threshold correction method for each joint;According to the problem that the monocular camera can not detect the depth Z value in the human posture data accurately, the Z value of the joint point is corrected for the human tilt angle through statistics;Then, according to the inaccurate recognition of Z value caused by large body posture, the accurate correction of Z value of human posture under different body posture is realized by normalizing the simulation proportion of each body limb;Finally, in order to solve the problem of jitter, lag problem and periodic noise in multiple frames caused by the speed change of human joints, one euro filtering and mean filtering of joint data are carried out. This paper verifies that the accuracy of 3D human posture detection based on the improved Mediapipe is more than 90% through the multi-pose recognition test for people of different heights, weights, ages and gender.

Investigation of the ^(121)Sb(α,γ)^(125)I reaction cross-section calculations at astrophysical energies

Proton-rich nuclei are synthesized via photodisintegration and reverse reactions.To examine this mechanism and reproduce the observed p-nucleus abundances,it is crucial to know the reaction rates and thereby the reaction cross sections of many isotopes.Given that the number of experiments on the reactions in astrophysical energy regions is very rare,the reaction cross sections are determined by theoretical methods whose accuracy should be tested.In this study,given that ^(121)Sb is a stable seed isotope located in the region of medium-mass p-nuclei,we investigated the cross sections and reaction rates of the ^(121)Sb(α,γ)^(125)I reaction using the TALYS computer code with 432 different combinations of input parameters(OMP,LDM,and SFM).The optimal model combinations were determined using the threshold logic unit method.The theoretical reaction cross-sectional results were compared with the experimental results reported in the literature.The reaction rates were determined using the two input parameter sets most compatible with the measurements,and they were compared with the reaction rate databases:STARLIB and REACLIB.

Iteratively weighted thresholding homotopy method for the sparse solution of underdetermined linear equations

Recently, iteratively reweighted methods have attracted much interest in compressed sensing, outperforming their unweighted counterparts in most cases. In these methods, decision variables and weights are optimized alternatingly, or decision variables are optimized under heuristically chosen weights. In this paper,we present a novel weighted l1-norm minimization problem for the sparsest solution of underdetermined linear equations. We propose an iteratively weighted thresholding method for this problem, wherein decision variables and weights are optimized simultaneously. Furthermore, we prove that the iteration process will converge eventually. Using the homotopy technique, we enhance the performance of the iteratively weighted thresholding method. Finally, extensive computational experiments show that our method performs better in terms of both running time and recovery accuracy compared with some state-of-the-art methods.

Sustainable Investment Forecasting of Power Grids Based on theDeep Restricted Boltzmann Machine Optimized by the Lion Algorithm

This paper proposes a new power grid investment prediction model based on the deep restricted Boltzmann machine(DRBM)optimized by the Lion algorithm(LA).Firstly,two factors including transmission and distribution price reform(TDPR)and 5G station construction were comprehensively incorporated into the consideration of influencing factors,and the fuzzy threshold method was used to screen out critical influencing factors.Then,the LA was used to optimize the parameters of the DRBM model to improve the model’s prediction accuracy,and the model was trained with the selected influencing factors and investment.Finally,the LA-DRBM model was used to predict the investment of a power grid enterprise,and the final prediction result was obtained by modifying the initial result with the modifying factors.The LA-DRBMmodel compensates for the deficiency of the singlemodel,and greatly improves the investment prediction accuracy of the power grid.In this study,a power grid enterprise was taken as an example to carry out an empirical analysis to prove the validity of the model,and a comparison with the RBM,support vector machine(SVM),back propagation neural network(BPNN),and regression model was conducted to verify the superiority of the model.The conclusion indicates that the proposed model has a strong generalization ability and good robustness,is able to abstract the combination of low-level features into high-level features,and can improve the efficiency of the model’s calculations for investment prediction of power grid enterprises.

Prediction of Short-Term Distributions of Load Extremes of Offshore Wind Turbines

This paper proposes a new methodology to select an optimal threshold level to be used in the peak over threshold （POT） method for the prediction of short-term distributions of load extremes of offshore wind turbines. Such an optimal threshold level is found based on the estimation of the variance-to-mean ratio for the occurrence of peak values, which characterizes the Poisson assumption. A generalized Pareto distribution is then fitted to the extracted peaks over the optimal threshold level and the distribution parameters are estimated by the method of the maximum spacing estimation. This methodology is applied to estimate the short-term distributions of load extremes of the blade bending moment and the tower base bending moment at the mudline of a monopile-supported 5MW offshore wind turbine as an example. The accuracy of the POT method using the optimal threshold level is shown to be better, in terms of the distribution fitting, than that of the POT methods using empirical threshold levels. The comparisons among the short-term extreme response values predicted by using the POT method with the optimal threshold levels and with the empirical threshold levels and by using direct simulation results further substantiate the validity of the proposed new methodology.

Characterizing the Seasonal and Directional Varying Properties in A Marine Environment

With noticing an increasing number of failure events for offshore structures in the present days, it is now realized that modeling the marine environment especially for exceptional environmental conditions is quite important. It is recognized that a possible improvement in the traditional modeling of environmental characteristics, which are the basis for the load models for structural analysis and design, may be needed. In this paper, the seasonal and directional varying properties in modeling the ocean parameter, the wave height, are studied. The peak over threshold（POT） method is selected to model the extreme wave height by utilizing a non-stationary discrete statistical extreme model. The varying parameters are taken into account with a changing pattern to reflect the seasonal and directional dependent behavior. Both the magnitude and the occurrence rate of the extreme values are investigated. Detailed discussion on the continuity of the established model is also given. The importance of the proposed model is demonstrated in reliability analysis for a jacket structure. The sensitivity to the changing marine environment in reliability analyses is investigated.

3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing

A grain-based distinct element model featuring three-dimensional （3D） Voronoi tessellations （randompoly-crystals） is proposed for simulation of crack damage development in brittle rocks. The grainboundaries in poly-crystal structure produced by Voronoi tessellations can represent flaws in intact rockand allow for numerical replication of crack damage progression through initiation and propagation ofmicro-fractures along grain boundaries. The Voronoi modelling scheme has been used widely in the pastfor brittle fracture simulation of rock materials. However the difficulty of generating 3D Voronoi modelshas limited its application to two-dimensional （2D） codes. The proposed approach is implemented inNeper, an open-source engine for generation of 3D Voronoi grains, to generate block geometry files thatcan be read directly into 3DEC. A series of Unconfined Compressive Strength （UCS） tests are simulated in3DEC to verify the proposed methodology for 3D simulation of brittle fractures and to investigate therelationship between each micro-parameter and the model＇s macro-response. The possibility of numericalreplication of the classical U-shape strength curve for anisotropic rocks is also investigated innumerical UCS tests by using complex-shaped （elongated） grains that are cemented to one another alongtheir adjoining sides. A micro-parameter calibration procedure is established for 3D Voronoi models foraccurate replication of the mechanical behaviour of isotropic and anisotropic （containing a fabric） rocks. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

Flood disaster monitoring based on Sentinel-1 data:A case study of Sihu Basin and Huaibei Plain,China

Summer floods occur frequently in many regions of China,affecting economic development and social stability.Remote sensing is a new technique in disaster monitoring.In this study,the Sihu Basin in Hubei Province of China and the Huaibei Plain in Anhui Province of China were selected as the study areas.Thresholds of backscattering coefficients in the decision tree method were calculated with the histogram analysis method,and flood disaster monitoring in the two study areas was conducted with the threshold method using Sentinel-1 satellite images.Through satellite-based flood disaster monitoring,the flooded maps and the areas of expanded water bodies and flooded crops were derived.The satellite-based monitoring maps were derived by comparing the expanded area of images during a flood disaster with that before the disaster.The difference in spatiotemporal distribution of flood disasters in these two regions was analyzed.The results showed that flood disasters in the Sihu Basin occurred frequently in June and July,and flood disasters in the Huaibei Plain mostly occurred in August,with a high interannual vari-ability.Flood disasters in the Sihu Basin were usually widespread,and the affected area was between Changhu and Honghu lakes.The Huaibei Plain was affected by scattered disasters.The annual mean percentages of flooded crop area were 14.91%and 3.74% in the Sihu Basin and Huaibei Plain,respectively.The accuracies of the extracted flooded area in the Sihu Basin in 2016 and 2017 were 96.20% and 95.19%,respectively.

New method for cotton fractional vegetation cover extraction based on UAV RGB images

As the key principle of precision farming,the distribution of fractional vegetation cover is the basis of crop management within the field serves.To estimate crop FVC rapidly at the farm scale,high temporal-spatial resolution imagery obtained by unmanned aerial vehicle(UAV)was adopted.To verify the application potential of consumer-grade UAV RGB imagery in estimated FVC,blue-green characteristic vegetation index(TBVI)and red-green vegetation index(TRVI)were proposed in this study according to the differences of the gray value among cotton vegetation,soil and shadow in the field.First,two new constructed indices and several published indices were used to extract visible light images and generate greyscale images for each of the visible light vegetation indices.Then,the thresholds of cotton vegetation and non-vegetation pixels were established based on the vegetation index threshold method which combines support vector machine classification and vegetation index.Finally,the accuracy difference in vegetation information extraction between the newly constructed and several published indices was compared.The results show that the accuracy of the information extracted by TRVI is higher than that of subdivision index of other visible light(FVC extraction precision in the first bud stage of cotton:R2=0.832,RMSE=2.307,nRMSE=4.405%;FVC extraction precision in the bud stage of cotton:R2=0.981,RMSE=1.393,nRMSE=1.984%;FVC extraction precision in the flowering stage of cotton:R2=0.893,RMSE=2.101,nRMSE=2.422%;FVC extraction precision in the boll stage of cotton:R2=0.958,RMSE=1.850,nRMSE=2.050%).

Background Interference Removal Algorithm for PIV Preprocessing Based on Improved Local Otsu Thresholding

Due to background light fluctuation,noise interference,voltage fluctuation,and other factors,there will be noise interference of different intensities in the background of the collected image.In this paper,a PIV image background interference removal algorithm based on improved neighborhood Otsu processing is proposed.The algorithm proposed in this paper separates the particle image from the background interference through the adaptive neighborhood improved Otsu threshold segmentation method and uses the common PIV analysis tools PIVLab and para PIV to analyze the flow pattern after the interference is removed.The experimental results demonstrated that the proposed algorithm can obviously improve the quality of PIV results in terms of both PSNR and SSIM in the case of background light interference,and the increase in average performance is nearly 50%compared with traditional preprocessing algorithms,which solves the problem of large flow pattern analysis error caused by poor background light removal effect in the case of irregular grating and other background light interference only using traditional preprocessing.

Classified denoising method for laser point cloud data of stored grain bulk surface based on discrete wavelet threshold

Surfaces of stored grain bulk are often reconstructed from organized point sets with noise by 3-D laser scanner in an online measuring system.As a result,denoising is an essential procedure in processing point cloud data for more accurate surface reconstruction and grain volume calculation.A classified denoising method was presented in this research for noise removal from point cloud data of the grain bulk surface.Based on the distribution characteristics of cloud point data,the noisy points were divided into three types:The first and second types of the noisy points were either sparse points or small point cloud data deviating and suspending from the main point cloud data,which could be deleted directly by a grid method;the third type of the noisy points was mixed with the main body of point cloud data,which were most difficult to distinguish.The point cloud data with those noisy points were projected into a horizontal plane.An image denoising method,discrete wavelet threshold(DWT)method,was applied to delete the third type of the noisy points.Three kinds of denoising methods including average filtering method,median filtering method and DWT method were applied respectively and compared for denoising the point cloud data.Experimental results show that the proposed method remains the most of the details and obtains the lowest average value of RMSE(Root Mean Square Error,0.219)as well as the lowest relative error of grain volume(0.086%)compared with the other two methods.Furthermore,the proposed denoising method could not only achieve the aim of removing noisy points,but also improve self-adaptive ability according to the characteristics of point cloud data of grain bulk surface.The results from this research also indicate that the proposed method is effective for denoising noisy points and provides more accurate data for calculating grain volume.

Junction temperature measurement of alternating current light-emitting-diode by threshold voltage method

Junction temperature of alternating current light-emitting-diode （AC-LED） has a significant effect on its stable light output and lifetime. The threshold voltage measurement is employed to characterize the junction temperature of AC-LED, due to its excellent merits in high efficiency and accuracy. The threshold voltage is measured when the driving current of an AC-LED rises to a reference on-set value from the zero-crossing node. Based on multiple measurements of threshold voltage at different temperatures, a linear relationship was uncovered between the threshold voltage and the junction temperature of AC- LED with the correlating factor of temperature sensitive parameter （TSP）. Thereby, we can calculate the junction temperature with the TSP and threshold voltage once the AC-LED stays at thermal equilibrium state. The accuracy of the proposed junction temperature measurement technique was found to be ＋3.2℃ for the reference current of 1 mA. It is concluded that the method of threshold voltage is accurate and simple to implement, making it highly suitable for measuring the junction temperature of AC-LED in industry.

An Adaptive Threshold Dynamics Method for Three-Dimensional Wetting on Rough Surfaces

We propose an adaptive threshold dynamics method for wetting problems in three space dimensions.The method is based on solving a linear heat equation and a thresholding step in each iteration.The heat equation is discretized by a cell-centered finite volume method on an adaptively refined mesh.An efficient technique for volume conservation is developed on the nonuniform meshes based on a quick-sorting operation.By this method,we compute some interesting wetting problems on complicated surfaces.Numerical results verify some recent theory for the apparent contact angle on rough and chemically patterned surfaces.

Changes in rice cropping systems in the Poyang Lake Region, China during 2004-2010

Rice cropping systems not only characterize comprehensive utilization intensity of agricultural resources but also serve as the basis to enhance the provision services of agro-ecosystems. Yet, it is always affected by external factors, like agricultural policies. Since 2004, seven consecutive No.1 Central Documents issued by the Central Government have focused on agricultural development in China. So far, few studies have investigated the effects of these policies on the rice cropping systems. In this study, based upon the long-term field survey information on paddy rice fields, we proposed a method to discriminate the rice cropping systems with Landsat data and quantified the spatial variations of rice cropping systems in the Poyang Lake Region （PLR）, China. The results revealed that： （1） from 2004 to 2010, the decrement of paddy rice field was 46.76 km2 due to the land use change. （2） The temporal dynamics of NDVI derived from Landsat historical images could well characterize the temporal development of paddy rice fields. NDVI curves of single cropping rice fields showed one peak, while NDVI curves of double cropping rice fields displayed two peaks annually. NDVI of fallow field fluctuated between 0.15 and 0.40. NDVI of the flooded field during the transplanting period was relatively low, about 0.20±0.05, while NDVI during the period of panicle initiation to heading reached the highest level （above 0.80）. Then, several temporal windows were determined based upon the NDVI variations of different rice cropping systems. （3） With the spatial pattern of paddy rice field and the NDVI threshold within optimum temporal windows, the spatial variation of rice cropping systems was very obvious, with an increased multiple cropping index of rice about 20.2% from 2004 to 2010. The result indicates that agricultural policies have greatly enhanced the food provision services in the PLR, China.

Study of Aircraft Icing Warning Algorithm Based on Millimeter Wave Radar

In order to avoid accidents due to aircraft icing, an algorithm for identifying supercooled water was studied. Specifically, a threshold method based on millimeter wave radar, lidar, and radiosonde was used to retrieve the coverage area of supercooled water and a fuzzy logic algorithm was used to classify the observed meteorological targets. The macrophysical characteristics of supercooled water could be accurately identified by combing the threshold method with the fuzzy logic algorithm. In order to acquire microphysical characteristics of supercooled water in a mixed phase, the unimodal spectral distribution of supercooled water was extracted from a bimodal or trimodal spectral distribution of a mixed phase cloud, which was then used to retrieve the effective radius and liquid water content of supercooled water by using an empirical formula. These retrieved macro- and micro-physical characteristics of supercooled water can be used to guide aircrafts during takeoff, flight, and landing to avoid dangerous areas.