以不同脱氧方式熔炼的海洋工程用钢为研究对象,利用SEM、EDS及Image-Pro Plus 6.0软件对钢中夹杂物形貌、组成及尺寸分布等进行表征,通过3.5%NaCl溶液中阳极极化及腐蚀实验对钢中夹杂物诱发点蚀的行为进行探究。结果表明,与Al-Mg脱氧钢...以不同脱氧方式熔炼的海洋工程用钢为研究对象,利用SEM、EDS及Image-Pro Plus 6.0软件对钢中夹杂物形貌、组成及尺寸分布等进行表征,通过3.5%NaCl溶液中阳极极化及腐蚀实验对钢中夹杂物诱发点蚀的行为进行探究。结果表明,与Al-Mg脱氧钢相比,Ti-Mg脱氧钢中形成了含有TiO_x的复合氧化物,夹杂数量更多且平均尺寸更小(小于1μm),有利于MnS的异质形核析出及弥散分布;低腐蚀活性的含TiOx复合氧化物及高度分散、异质局部析出MnS夹杂具有较低的点蚀敏感性及自腐蚀催化作用,降低了点蚀的诱发及扩展,有效提高了钢的抗点蚀性能。展开更多
Porous Ti-Mg composites were successfully fabricated through powder metallurgy processing with ammonium hydrogen carbonate （NH4HCO3） as a space-holder. The effects of NH4HCO3 on properties of porous composites were ...Porous Ti-Mg composites were successfully fabricated through powder metallurgy processing with ammonium hydrogen carbonate （NH4HCO3） as a space-holder. The effects of NH4HCO3 on properties of porous composites were comprehensively investigated. The pore characteristics and compressive properties of the specimens were characterized by X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. The results show that the porosity of the porous composites can be tailored effectively by changing the amount of NH4HCO3 added, and the use of NI-I4HCO3 has no influence on the microstructure and phase constituents of the Ti-10%Mg porous composites. The open porosity and compressive strength as well as compressive elastic modulus vary with the adding amount and particle size of NHaHCO3. When the mass fraction of NHaHCO3 added is 25%, elastic modulus and compressive strength of composites with porosity of around 50% are found to be similar to those of human bone.展开更多
文摘以不同脱氧方式熔炼的海洋工程用钢为研究对象,利用SEM、EDS及Image-Pro Plus 6.0软件对钢中夹杂物形貌、组成及尺寸分布等进行表征,通过3.5%NaCl溶液中阳极极化及腐蚀实验对钢中夹杂物诱发点蚀的行为进行探究。结果表明,与Al-Mg脱氧钢相比,Ti-Mg脱氧钢中形成了含有TiO_x的复合氧化物,夹杂数量更多且平均尺寸更小(小于1μm),有利于MnS的异质形核析出及弥散分布;低腐蚀活性的含TiOx复合氧化物及高度分散、异质局部析出MnS夹杂具有较低的点蚀敏感性及自腐蚀催化作用,降低了点蚀的诱发及扩展,有效提高了钢的抗点蚀性能。
文摘Porous Ti-Mg composites were successfully fabricated through powder metallurgy processing with ammonium hydrogen carbonate （NH4HCO3） as a space-holder. The effects of NH4HCO3 on properties of porous composites were comprehensively investigated. The pore characteristics and compressive properties of the specimens were characterized by X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. The results show that the porosity of the porous composites can be tailored effectively by changing the amount of NH4HCO3 added, and the use of NI-I4HCO3 has no influence on the microstructure and phase constituents of the Ti-10%Mg porous composites. The open porosity and compressive strength as well as compressive elastic modulus vary with the adding amount and particle size of NHaHCO3. When the mass fraction of NHaHCO3 added is 25%, elastic modulus and compressive strength of composites with porosity of around 50% are found to be similar to those of human bone.
