To meet the demand of the domestic pressure vessel industry for roll-bonded clad steel plates, Baosteel has developed an S30403 ＋ Q345R roll-bonded clad steel plate. Comprehensive inspections of the composition, micr...To meet the demand of the domestic pressure vessel industry for roll-bonded clad steel plates, Baosteel has developed an S30403 ＋ Q345R roll-bonded clad steel plate. Comprehensive inspections of the composition, microstructure, and properties are made to systematically evaluate the steel plate in the normalized and normalized ＋ stress relieved states. The results show the cladding interface of the S30403 ＋ Q345R roll-bonded clad steel plate has high shear strength, the base metal has good properties, and the mechanical properties of the steel plate head and tail are uniform. The performance is fully consistent with the technical requirements of the roll-bonded clad steel plate for pressure vessels.展开更多
Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-st...Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-strength and high-toughness clad steel plate with a shear strength of over 310 MPa for the nuclear power plant＇ s safety injection tank. The properties of the quenched and tempered and the simulated post-weld heat treatment states are systematically studied herein through a comprehensive inspection and evaluation of the composition,microstructure,and properties of the clad steel plate. The results show that the bonding interface has high shear strength and that the base metal has high strength and good toughness at low temperatures. Hence, the performance fully meets the technical requirements of the CAP1400 nuclear power plant＇ s safety injection tank in the country＇ s nuclear demonstration project. The roll-bonded clad steel plate can be used to manufacture the safety injection tank of the CAP1400 nuclear power plant.展开更多
In this study,the interface characteristics of a direct hot rolling titanium-clad steel plate were analyzed, and the mechanism of interface cracking was explored. The detrimental effect from the formation of TiFe ,TiC...In this study,the interface characteristics of a direct hot rolling titanium-clad steel plate were analyzed, and the mechanism of interface cracking was explored. The detrimental effect from the formation of TiFe ,TiC,and a Si-enriched layer on the bonding strength was clarified, and an industrial-scaled titanium-clad steel plate with shear strength over 200 MPa was produced with a carefully set schedule accordingly. It was found that hot rolling titanium-clad steel plates had a flat interface without obvious cracks. In the rolling process,both Ti and Fe atoms interdiflhsed,but Fe difthsed much faster than Ti. The Fe-diffused area consisted of three regions. After a high temperature heat treatment, the diffusion depth of Fe and Ti elements increased significantly and evident Si segregation and TiFe layers were identified. Thermal cracking initiated in the Si segregation layer and then propagated along the TiFe layer and Fe-diffused layer on the titanium side.展开更多
In this paper,a brief introduction on clad-rolling heavy steel plates of 90 mm and 140 mm thick is presented.The steel plates were hot rolled by 265mm slabs that are cladded by double 135mm continuous casting slabs of...In this paper,a brief introduction on clad-rolling heavy steel plates of 90 mm and 140 mm thick is presented.The steel plates were hot rolled by 265mm slabs that are cladded by double 135mm continuous casting slabs of Q235 steel.After hot rolling,interface of the cladding slabs completely disappeared, revealing uniform grains similar to the rest of the materials.Ultrasonic tests were carried out on both steel plates,demonstrating excellent results.Through thickness tensile tests were also implemented on both steel plates,resulting in perfect mechanical properties complying with specific standards.The result proves that a minimum reduction rate of 1.89 is available in producing 140 mm thick steel plate with excellent through thickness properties.展开更多
To meet the demand of the pressure vessel industry, Baosteel has developed an S11306 ＋ SA516Gr70 roll-bonded clad steel plate. Comprehensive inspections of the composition, microstructure, and properties are performe...To meet the demand of the pressure vessel industry, Baosteel has developed an S11306 ＋ SA516Gr70 roll-bonded clad steel plate. Comprehensive inspections of the composition, microstructure, and properties are performed to systematically evaluate the steel plate in normalized state and normalized ＋ stress relieved state. The results show the cladding interface of the Sl1306 ＋ SA516Gr70 roll-bonded clad steel plate has high shear strength, and the base metal has good mechanical properties. The performance is fully consistent with the technical requirements of the roll-bonded clad steel plate for pressure vessels.展开更多
Types of bimetal clad plate, manufacturing methods, and their fields of application were summarized. In particular,key aspects of the welding of clad-rolled stainless steel were described, including the weldability of...Types of bimetal clad plate, manufacturing methods, and their fields of application were summarized. In particular,key aspects of the welding of clad-rolled stainless steel were described, including the weldability of the base and clad metals, design criteria for the transition layer, the selection of the type of welding process and consumables used, types of blanking and welding bevels, preparation and assembly prior to welding, welding procedure requirements, post-weld cleaning and heat treatment, and welding quality inspection. This paper will serve as a reference for the welding technology used in future consumer applications in related fields.展开更多
Duplex stainless steel clad plate exhibits good performance and is relatively inexpensive,however,some difficulties must be overcome when welding different materials. In this study,submerged arc welding（ SAW） was us...Duplex stainless steel clad plate exhibits good performance and is relatively inexpensive,however,some difficulties must be overcome when welding different materials. In this study,submerged arc welding（ SAW） was used to weld Baosteel ship clad plates（ 2205 ＋ DH36）,and the performance of the welded joints was tested. The results indicate that the mechanical properties and the corrosion resistance of the welded joints meet the required specifications. The distribution of the main anti-corrosive elements and the phase ratio of the welded joint are analyzed,thereby indicating excellent uniformity and confirming that the welded joint is corrosion resistant.展开更多
The 2205 duplex stainless ＋ DH36 clad steel plate was welded by gas metal arc welding（GMAW）, and the welding performance of the clad steel plate was investigated. The results show that the adaptability of the weldi...The 2205 duplex stainless ＋ DH36 clad steel plate was welded by gas metal arc welding（GMAW）, and the welding performance of the clad steel plate was investigated. The results show that the adaptability of the welding procedure for the base metal of carbon steel, the transition layer, and the cladding material is excellent. The test results indicate that the phase proportion and component dilution of the GMAW-welded joints of clad steel plate can be effectively controlled to yield joints with good mechanical properties and corrosion resistance.展开更多
The Ti/Al/Ti clad plates exhibit a broad spectrum of potential applications.However,the conventional techniques of hot-pressing composite and explosive composite are intricate and environmentally hazardous.A novel met...The Ti/Al/Ti clad plates exhibit a broad spectrum of potential applications.However,the conventional techniques of hot-pressing composite and explosive composite are intricate and environmentally hazardous.A novel method was introduced for preparing clad plates,namely,the powder-in-tube method.This method involves a combination of cold rolling,annealing at a temperature of 550℃,and double rolling.The morphology of the intermetallic compound layer was analyzed through the utilization of interface stripping test,tensile test,and microscopic characterization.The interface morphology,interface bonding properties,tensile fracture structures,and properties of plates under the first and second rolling were compared,along with the effects of intermetallic compounds on the interface properties.The results indicate that the powder-in-tube method,when annealed at 550℃,can produce a composite plate featuring a complete and uniform Ti/Al interface.The obtained plate exhibits a peeling strength of 21.5 N/mm,tensile strength of 424 MPa,and elongation of 11.5%.Furthermore,a systematic analysis was conducted to determine the causes of performance degra-dation observed during annealing at temperatures of 600 and 650℃.展开更多
文摘To meet the demand of the domestic pressure vessel industry for roll-bonded clad steel plates, Baosteel has developed an S30403 ＋ Q345R roll-bonded clad steel plate. Comprehensive inspections of the composition, microstructure, and properties are made to systematically evaluate the steel plate in the normalized and normalized ＋ stress relieved states. The results show the cladding interface of the S30403 ＋ Q345R roll-bonded clad steel plate has high shear strength, the base metal has good properties, and the mechanical properties of the steel plate head and tail are uniform. The performance is fully consistent with the technical requirements of the roll-bonded clad steel plate for pressure vessels.
文摘Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-strength and high-toughness clad steel plate with a shear strength of over 310 MPa for the nuclear power plant＇ s safety injection tank. The properties of the quenched and tempered and the simulated post-weld heat treatment states are systematically studied herein through a comprehensive inspection and evaluation of the composition,microstructure,and properties of the clad steel plate. The results show that the bonding interface has high shear strength and that the base metal has high strength and good toughness at low temperatures. Hence, the performance fully meets the technical requirements of the CAP1400 nuclear power plant＇ s safety injection tank in the country＇ s nuclear demonstration project. The roll-bonded clad steel plate can be used to manufacture the safety injection tank of the CAP1400 nuclear power plant.
文摘In this study,the interface characteristics of a direct hot rolling titanium-clad steel plate were analyzed, and the mechanism of interface cracking was explored. The detrimental effect from the formation of TiFe ,TiC,and a Si-enriched layer on the bonding strength was clarified, and an industrial-scaled titanium-clad steel plate with shear strength over 200 MPa was produced with a carefully set schedule accordingly. It was found that hot rolling titanium-clad steel plates had a flat interface without obvious cracks. In the rolling process,both Ti and Fe atoms interdiflhsed,but Fe difthsed much faster than Ti. The Fe-diffused area consisted of three regions. After a high temperature heat treatment, the diffusion depth of Fe and Ti elements increased significantly and evident Si segregation and TiFe layers were identified. Thermal cracking initiated in the Si segregation layer and then propagated along the TiFe layer and Fe-diffused layer on the titanium side.
文摘In this paper,a brief introduction on clad-rolling heavy steel plates of 90 mm and 140 mm thick is presented.The steel plates were hot rolled by 265mm slabs that are cladded by double 135mm continuous casting slabs of Q235 steel.After hot rolling,interface of the cladding slabs completely disappeared, revealing uniform grains similar to the rest of the materials.Ultrasonic tests were carried out on both steel plates,demonstrating excellent results.Through thickness tensile tests were also implemented on both steel plates,resulting in perfect mechanical properties complying with specific standards.The result proves that a minimum reduction rate of 1.89 is available in producing 140 mm thick steel plate with excellent through thickness properties.
文摘To meet the demand of the pressure vessel industry, Baosteel has developed an S11306 ＋ SA516Gr70 roll-bonded clad steel plate. Comprehensive inspections of the composition, microstructure, and properties are performed to systematically evaluate the steel plate in normalized state and normalized ＋ stress relieved state. The results show the cladding interface of the Sl1306 ＋ SA516Gr70 roll-bonded clad steel plate has high shear strength, and the base metal has good mechanical properties. The performance is fully consistent with the technical requirements of the roll-bonded clad steel plate for pressure vessels.
文摘Types of bimetal clad plate, manufacturing methods, and their fields of application were summarized. In particular,key aspects of the welding of clad-rolled stainless steel were described, including the weldability of the base and clad metals, design criteria for the transition layer, the selection of the type of welding process and consumables used, types of blanking and welding bevels, preparation and assembly prior to welding, welding procedure requirements, post-weld cleaning and heat treatment, and welding quality inspection. This paper will serve as a reference for the welding technology used in future consumer applications in related fields.
文摘Duplex stainless steel clad plate exhibits good performance and is relatively inexpensive,however,some difficulties must be overcome when welding different materials. In this study,submerged arc welding（ SAW） was used to weld Baosteel ship clad plates（ 2205 ＋ DH36）,and the performance of the welded joints was tested. The results indicate that the mechanical properties and the corrosion resistance of the welded joints meet the required specifications. The distribution of the main anti-corrosive elements and the phase ratio of the welded joint are analyzed,thereby indicating excellent uniformity and confirming that the welded joint is corrosion resistant.
文摘The 2205 duplex stainless ＋ DH36 clad steel plate was welded by gas metal arc welding（GMAW）, and the welding performance of the clad steel plate was investigated. The results show that the adaptability of the welding procedure for the base metal of carbon steel, the transition layer, and the cladding material is excellent. The test results indicate that the phase proportion and component dilution of the GMAW-welded joints of clad steel plate can be effectively controlled to yield joints with good mechanical properties and corrosion resistance.
基金supported by the 1ll Project(B16009)the National Key Research and Development Program of China(2017YFB0304105).
文摘The Ti/Al/Ti clad plates exhibit a broad spectrum of potential applications.However,the conventional techniques of hot-pressing composite and explosive composite are intricate and environmentally hazardous.A novel method was introduced for preparing clad plates,namely,the powder-in-tube method.This method involves a combination of cold rolling,annealing at a temperature of 550℃,and double rolling.The morphology of the intermetallic compound layer was analyzed through the utilization of interface stripping test,tensile test,and microscopic characterization.The interface morphology,interface bonding properties,tensile fracture structures,and properties of plates under the first and second rolling were compared,along with the effects of intermetallic compounds on the interface properties.The results indicate that the powder-in-tube method,when annealed at 550℃,can produce a composite plate featuring a complete and uniform Ti/Al interface.The obtained plate exhibits a peeling strength of 21.5 N/mm,tensile strength of 424 MPa,and elongation of 11.5%.Furthermore,a systematic analysis was conducted to determine the causes of performance degra-dation observed during annealing at temperatures of 600 and 650℃.
