期刊文献+
共找到164篇文章
< 1 2 9 >
每页显示 20 50 100
Wavefront evolution of the signal beam in Ti:sapphire chirped pulse amplifier 被引量:1
1
作者 Zhen Guo Lianghong Yu +2 位作者 Wenqi Li Zebiao Gan Xiaoyan Liang 《Chinese Physics B》 SCIE EI CAS CSCD 2019年第1期385-389,共5页
We studied the evolution of wavefront aberration(WFA) of a signal beam during amplification in a Ti:sapphire chirped pulse amplification(CPA) system. The results verified that the WFA of the amplified laser beam has l... We studied the evolution of wavefront aberration(WFA) of a signal beam during amplification in a Ti:sapphire chirped pulse amplification(CPA) system. The results verified that the WFA of the amplified laser beam has little relation with the change of the pump beam energies. Transverse parasitic lasing that might occur in CPA hardly affects the wavefront of the signal beam. Thermal effects were also considered in this study, and the results show that the thermal effect cumulated in multiple amplification processes also has no obvious influence on the wavefront of the signal beam for a single-shot frequency. The results presented in this paper confirmed experimentally that the amplification in a Ti:sapphire CPA system has little impact on the WFA of the signal beam and it is very helpful for wavefront correction of single-shot PW and multi-PW laser systems based on Ti:sapphire. 展开更多
关键词 WAVEFRONT ABERRAtiON ti:sapphire CHIRPED pulse AMPLIFICAtiON WAVEFRONT correction
下载PDF
Spatial chirp in Ti:sapphire multipass amplifier
2
作者 黎文开 陆俊 +6 位作者 李妍妍 郭晓杨 吴分翔 於林鹏 王朋飞 许毅 冷雨欣 《Chinese Physics B》 SCIE EI CAS CSCD 2017年第3期344-348,共5页
The spatial chirp generated in the Ti:sapphire multipass amplifier is numerically investigated based on the one- dimensional (1D) and two-dimensional (2D) Frantz-Nodvik equations. The simulation indicates that th... The spatial chirp generated in the Ti:sapphire multipass amplifier is numerically investigated based on the one- dimensional (1D) and two-dimensional (2D) Frantz-Nodvik equations. The simulation indicates that the spatial chirp is induced by the spatially inhomogeneous gain, and it can be almost eliminated by utilization of proper beam profiles and spot sizes of the signal and pump pulses, for example, the pump pulse has a top-hatted beam profile and the signal pulse has a super-Gaussian beam profile with a relatively larger spot size. In this way, a clear understanding of spatial chirp mechanisms in the Ti:sapphire multipass amplifier is proposed, therefore we can effectively almost eliminate the spatial chirp and improve the beam quality of a high-power Ti:sapphire chirped pulse amplifier system. 展开更多
关键词 spatial chirp multipass amplifier tisapphire
下载PDF
Operation of Kerr-lens mode-locked Ti:sapphire laser in the non-soliton regime 被引量:2
3
作者 刘华刚 胡明列 +3 位作者 宋有建 栗岩峰 柴路 王清月 《Chinese Physics B》 SCIE EI CAS CSCD 2010年第1期372-377,共6页
A Kerr-lens mode-locked Ti:sapphire laser operating in a non-soliton regime is demonstrated. Dispersive wave generation is observed as a result of third order dispersion in the vicinity of zero dispersion. The charac... A Kerr-lens mode-locked Ti:sapphire laser operating in a non-soliton regime is demonstrated. Dispersive wave generation is observed as a result of third order dispersion in the vicinity of zero dispersion. The characteristics of the Ti:sapphire l^ser operating in a positive dispersion regime are presented, where the oscillator directly generates pulses with duration continuously tunable from 0.37 ps to 2.11 ps, and 36 fs pulses are achieved atter extracavity compression. The oscillation is numerically simulated with an extended nonlinear Schr6dinger equation, and the simulation results are in good agreement with the experimental results. 展开更多
关键词 Kerr-lens mode locking dispersive wave generation positive dispersion regime tisapphire laser
下载PDF
An all-solid-state high power quasi-continuous-wave tunable dual-wavelength Ti:sapphire laser system using birefringence filter 被引量:1
4
作者 丁欣 马洪梅 +4 位作者 邹雷 邹跃 温午麒 王鹏 姚建铨 《Chinese Physics B》 SCIE EI CAS CSCD 2007年第7期1991-1995,共5页
This paper describes a tunable dual-wavelength Ti:sapphire laser system with quasi-continuous-wave and high-power outputs. In the design of the laser, it adopts a frequency-doubled Nd:YAG laser as the pumping source... This paper describes a tunable dual-wavelength Ti:sapphire laser system with quasi-continuous-wave and high-power outputs. In the design of the laser, it adopts a frequency-doubled Nd:YAG laser as the pumping source, and the birefringence filter as the tuning element. Tunable dual-wavelength outputs with one wavelength range from 700 nm to 756.5 nm, another from 830 nm to 900mn have been demonstrated. With a pump power of 23 W at 532 nm, a repetition rate of 7 kHz and a pulse width of 47.6 ns, an output power of 5.1 W at 744.8 nm and 860.9 nm with a pulse width of 13.2 ns and a line width of 3 nm has been obtained, it indicates an optical-to-optical conversion efficiency of 22.2%. 展开更多
关键词 ALL-SOLID-STATE DUAL-WAVELENGTH tisapphire laser birefringence filter
下载PDF
A High-Pulse-Energy High-Beam-Quality Tunable Ti:Sapphire Laser Using a Prism-Dispersion Cavity 被引量:1
5
作者 许昌 代世波 +10 位作者 郭川 卞奇 左军卫 夏元钦 高宏伟 王志敏 薄勇 宗楠 张盛 彭钦军 许祖彦 《Chinese Physics Letters》 SCIE CAS CSCD 2017年第3期45-48,共4页
A high-pulse-energy high-beam-quality tunable Ti:sapphire laser pumped by a frequency-doubled Nd:YAG laser is demonstrated. Using a fused-silica prism as the dispersion element, a tuning range of 740-855 nm is obtai... A high-pulse-energy high-beam-quality tunable Ti:sapphire laser pumped by a frequency-doubled Nd:YAG laser is demonstrated. Using a fused-silica prism as the dispersion element, a tuning range of 740-855 nm is obtained. At an incident pump energy of 774mJ, the maximum output energy of 104mJ at 790nm with a pulse width of 100μs is achieved at a repetition rate of 5 Hz. To the best of our knowledge, it is the highest pulse energy at 790 nm with pulse width of hundred micro-seconds for an all-solid-state laser. The linewidth of output is 0.5 nm, and the beam quality factor M2 is 1.16. The high-pulse-energy high-beam-quality tunable Ti:sapphire laser in the range of 740-855 nm can be used to establish a more accurate and consistent absolute scale of second-order optical-nonlinear coefficients for KBe2BO3F2 measured in a wider wavelength range and to assess Miller's rule quantitatively. 展开更多
关键词 ti A High-Pulse-Energy High-Beam-Quality Tunable ti:sapphire Laser Using a Prism-Dispersion Cavity
下载PDF
Diode-pumped Kerr-lens mode-locked Ti: sapphire laser with broad wavelength tunability
6
作者 Han Liu Geyang Wang +6 位作者 Ke Yang Renzhu Kang Wenlong Tian Dacheng Zhang Jiangfeng Zhu Hainian Han Zhiyi Wei 《Chinese Physics B》 SCIE EI CAS CSCD 2019年第9期232-236,共5页
We report a direct blue-diode-pumped wavelength tunable Kerr-lens mode-locked Ti: sapphire laser.Central wavelength tunability as broad as 89 nm(736-825 nm) is achieved by adjusting the insertion of the prism.Pulses a... We report a direct blue-diode-pumped wavelength tunable Kerr-lens mode-locked Ti: sapphire laser.Central wavelength tunability as broad as 89 nm(736-825 nm) is achieved by adjusting the insertion of the prism.Pulses as short as 17 fs are generated at a central wavelength of 736 nm with an average output power of 31 mW.The maximum output power is 46.8 mW at a central wavelength of 797 nm with a pulse duration of 46 fs. 展开更多
关键词 blue-diode pump ti: sapphire WAVELENGTH tunable Kerr-lens MODE-LOCKED laser
下载PDF
A 100-TW Ti:Sapphire Laser System at a Repetition Rate of 0.1 Hz
7
作者 TENG Hao MA Jing-Long +6 位作者 WANG Zhao-Hua ZHENG Yi GE Xu-Lei ZHANG Wei WEI Zhi-Yi LI Yu-Tong ZHANG Jie 《Chinese Physics Letters》 SCIE CAS CSCD 2012年第1期141-143,共3页
We demonstrate a 100-TW-class femtosecond Ti:sapphire laser running at a repetition rate of 0.1Hz based on a 20TW/10 Hz laser facility (XL-Ⅱ).Pumping the new stage amplifier with a 25J green Nd:glass laser,we success... We demonstrate a 100-TW-class femtosecond Ti:sapphire laser running at a repetition rate of 0.1Hz based on a 20TW/10 Hz laser facility (XL-Ⅱ).Pumping the new stage amplifier with a 25J green Nd:glass laser,we successfully improve the laser energy to 3.4J with duration of 29 fs,corresponding to a peak power of 11 7 TW. 展开更多
关键词 ti:sapphire amplifier LASER
下载PDF
Tunable Supercontinuum Generated in a Yb^3+-Doped Microstructure Fiber Pumped by Ti:Sapphire Femtosecond Laser
8
作者 Wei Wang Fan-Chao Meng +8 位作者 Vuan Qing Shi Qiu Ting-Ting Dong Wei-Zhen Zhu Yu-Ting Zuo Ying nan Chao Wang Yue-Feng Qi Lan-Tian Hou 《Chinese Physics Letters》 SCIE CAS CSCD 2018年第10期31-35,共5页
We experimentally demonstrate that a tunable supercontinuum(SC) can be generated in a Yb3+-doped microstructure fiber by the concept of wavelength conversion with a Ti:sapphire femtosecond(fs) laser as the pump.... We experimentally demonstrate that a tunable supercontinuum(SC) can be generated in a Yb3+-doped microstructure fiber by the concept of wavelength conversion with a Ti:sapphire femtosecond(fs) laser as the pump.Experimental results show that an emission light around 1040 nm in an anomalous dispersion region is first generated and amplified by fs pulses in the normal dispersion region. Then, SC spectra from 1100 to 1380 nm and 630 to 840 nm can be achieved by combined effects of higher-order soliton fission and Raman soliton self-frequency shift in the anomalous dispersion region and self-phase modulation, dispersive wave, and four-wave mixing in the normal dispersion region. It is also demonstrated that the 20 nm change of pump results in a 280 nm broadband shift of soliton and the further red-shift of soliton is limited by OH-absorption at 1380 nm. 展开更多
关键词 Tunable Supercontinuum Generated in a Yb length MSF SC Doped Microstructure Fiber Pumped by ti:sapphire Femtosecond Laser ti
下载PDF
自锁模Ti:Al_2O_3激光器
9
作者 向望华 邢歧荣 +3 位作者 戴建明 李鹏 张伟力 王清月 《天津大学学报》 EI CAS CSCD 1996年第2期207-212,共6页
通过在腔内引入双棱镜对研制的Ti:Al_2O_3激光器实现了稳定的自锁模运转,最窄脉宽达53fs.分析了Ti:Al_2O_3激光器的自锁模原理及工作特性.
关键词 自锁模 自聚焦 自相位调制 激光器
下载PDF
全固化自锁模飞秒Ti∶S激光器实验研究
10
作者 白晋涛 穆参军 +2 位作者 于连君 王屹山 陈国夫 《光子学报》 EI CAS CSCD 北大核心 2001年第10期1292-1296,共5页
首次在国内系统报道了以腔内 L BO倍频 Nd∶ YVO4 激光器为泵浦源的全固化自锁模飞秒钛宝石激光器的实验结果 .设计了一种热不敏腔内 LBO倍频线性折叠腔结构 ,获得到了2 5.5%的光转换效率 ,泵浦功率为 2 2 W时得到了 5.6 W的基模绿光输... 首次在国内系统报道了以腔内 L BO倍频 Nd∶ YVO4 激光器为泵浦源的全固化自锁模飞秒钛宝石激光器的实验结果 .设计了一种热不敏腔内 LBO倍频线性折叠腔结构 ,获得到了2 5.5%的光转换效率 ,泵浦功率为 2 2 W时得到了 5.6 W的基模绿光输出功率 ;以该激光器为泵浦源 ,在线性 Z型腔的基础上 ,使用了一种能够通过改变腔内凹面聚焦镜折叠角消除象散的方法 ,直接由钛宝石激光器得到了脉冲宽度为 2 2 fs、功率为 3 0 0 m W的光脉冲 .整个激光系统稳定性好 ,噪音明显低于 Ar3 + 展开更多
关键词 腔内LBO倍频 ND:YVO4激光器 钛宝石振荡器 全固化自锁模飞秒钛宝石激光器 腔体结构
下载PDF
低重复率的Ti:Al_2O_3飞秒激光放大器研究 被引量:5
11
作者 侯洵 阮双琛 +3 位作者 杨建军 王水才 孙艳玲 丰善 《光子学报》 EI CAS CSCD 1997年第3期193-196,共4页
本文报道了重复频率为 10Hz的Ti: Al_2O_3飞秒激光放大器的研究.基于脉冲啁啾放大技术和采用再生/多通放大装置,得到了能量为 8mJ的放大光脉冲,在该放大系统中,激光脉冲获M净增益约8×10_7.
关键词 飞秒 激光器 脉冲啁啾放大 放大器
全文增补中
研制超高功率激光系统所需的优质大尺寸钛宝石晶体(Ti^(3+)∶Al_2O_3)
12
作者 邓佩珍 《红外与毫米波学报》 SCIE EI CAS CSCD 北大核心 2002年第z1期41-44,共4页
对作者采用温度梯度法(TGT)生长的钛宝石晶体与美国晶体系统公司的晶体进行了性能比较,结果表明,两者晶体质量水平相当.
关键词 高掺杂浓度钛宝石晶体、超快脉冲激光 增益放大
下载PDF
蓝宝石镀Ti/Ni复合膜及高温预扩散的研究 被引量:2
13
作者 高殷 张永清 +1 位作者 王艳 金鹤 《真空科学与技术学报》 EI CAS CSCD 北大核心 2014年第2期167-170,共4页
首先将蓝宝石表面金属化,镀钛/镍(Ti/Ni)复合膜,然后在900℃下将其进行高温预扩散,为下一步采用常规AgCu钎料焊接做准备。结果表明,要保证在900℃下扩散后镀钛层不流失,必须保证镀Ni层和镀Ti层的初始厚度比大于1;900℃下的最... 首先将蓝宝石表面金属化,镀钛/镍(Ti/Ni)复合膜,然后在900℃下将其进行高温预扩散,为下一步采用常规AgCu钎料焊接做准备。结果表明,要保证在900℃下扩散后镀钛层不流失,必须保证镀Ni层和镀Ti层的初始厚度比大于1;900℃下的最佳镀膜厚度和高温预扩散工艺是镀Ti层1~3μm,镀Ni层为3~5μm,扩散保温时间20min。 展开更多
关键词 蓝宝石 金属化 ti Ni复合膜 高温预扩散
下载PDF
镀Ti/Ni膜蓝宝石与无氧铜钎焊的研究 被引量:3
14
作者 高殷 张永清 +2 位作者 王艳 黄寅 金鹤 《真空电子技术》 2014年第4期1-4,31,共5页
为了可以采用常规的BAg72Cu-V钎料完成蓝宝石与无氧铜的连接,本研究中先将蓝宝石表面镀Ti/Ni复合膜,然后进行高温预扩散处理,最后将镀Ti/Ni膜蓝宝石与无氧铜在真空炉中进行钎焊。本文介绍了蓝宝石镀膜、扩散及焊接工艺,对镀Ti膜蓝宝石及... 为了可以采用常规的BAg72Cu-V钎料完成蓝宝石与无氧铜的连接,本研究中先将蓝宝石表面镀Ti/Ni复合膜,然后进行高温预扩散处理,最后将镀Ti/Ni膜蓝宝石与无氧铜在真空炉中进行钎焊。本文介绍了蓝宝石镀膜、扩散及焊接工艺,对镀Ti膜蓝宝石及镀Ti/Ni复合膜蓝宝石在高温预扩散前后分别进行了扫描电镜分析和X射线衍射分析,说明蓝宝石镀Ti/Ni膜扩散后的性能优于仅镀Ti膜,并通过对焊接接头的微观分析发现高温预扩散的优势。 展开更多
关键词 蓝宝石 ti/Ni复合膜 高温预扩散 钎焊
下载PDF
选区激光熔化Ti-6Al-4V粉末氧含量的在线监测
15
作者 李宇 范波 +3 位作者 陈从颜 刘京南 王文彤 唐林锋 《工业控制计算机》 2021年第4期13-15,共3页
选区激光熔化中金属粉末的循环利用是该技术的重要研究课题之一,其中粉末氧含量是决定粉末是否可重复利用的关键参数。选取Ti-6Al-4V粉末作为研究对象,使用设计的熔池光辐射检测系统,实现了粉末氧含量的在线监测。其中,检测系统中设计... 选区激光熔化中金属粉末的循环利用是该技术的重要研究课题之一,其中粉末氧含量是决定粉末是否可重复利用的关键参数。选取Ti-6Al-4V粉末作为研究对象,使用设计的熔池光辐射检测系统,实现了粉末氧含量的在线监测。其中,检测系统中设计并使用了复合结构的专用放大电路,能够有效检测微弱且变化快的熔池辐射光信号。实验结果表明,氧含量分别为0.09wt.%和0.13wt.%的两种粉末在580nm和590nm波长下的辐射光信号有明显差异,且两个波长下的信号之比可用于区分两种不同氧含量的粉末。 展开更多
关键词 选区激光熔化 ti-6Al-4V粉末氧含量 熔池辐射光检测系统 复合结构的放大电路 在线监测
下载PDF
基于TAS-TIS结构和前馈路径的两级CTLE的设计
16
作者 张春茗 徐阳臻 张璇 《半导体光电》 CAS 北大核心 2023年第5期736-740,共5页
在高速接口电路中,接收机通常采用连续时间线性均衡器(Continuous-Time Linear Equalizer,CTLE)消除符号间干扰(Inter-Symbol Interference,ISI)对信号传输的影响。为提高CTLE电路的高频增益和减少芯片面积,基于UMC(United Microelectro... 在高速接口电路中,接收机通常采用连续时间线性均衡器(Continuous-Time Linear Equalizer,CTLE)消除符号间干扰(Inter-Symbol Interference,ISI)对信号传输的影响。为提高CTLE电路的高频增益和减少芯片面积,基于UMC(United Microelectronics Corporation)28 nm工艺,设计了一款最大速率为50 Gbps的CTLE电路,其主体电路由跨导级联跨阻抗(Trans-Admittance Trans-impedance,TAS-TIS)结构和前馈路径的两级CTLE电路构成。在传统CTLE的基础上,使用有源电感做负载,以反相器为基础构建跨阻放大器和在输入管增加前馈通路等方式,有效地扩展了电路的工作频率。仿真结果显示,均衡后40 Gbps PAM4(4-Level Pulse Amplitude Modulation)信号、50 Gbps PAM4信号和28 Gbps NRZ(Non Return Zero Code)信号的眼图眼宽分别达到了0.68,0.5,0.92个码元间隔(UI),可满足后级电路对于输入信号的要求,对提升整体传输数据速率具有重要的意义。 展开更多
关键词 连续时间线性均衡器 跨导级联跨阻抗 跨阻放大器 前馈通路
下载PDF
Demonstration of joule-level chirped pulse amplification based on tiled Ti:sapphire amplifier 被引量:1
17
作者 Keyang Liu Yanqi Liu +10 位作者 Yunhai Tang Junchi Chen Cheng Wang Xingyan Liu Xiaobin Wang Yingbin Long Yi Xu Yujie Peng Xiaoming Lu Zhengzheng Liu Yuxin Leng 《Chinese Optics Letters》 SCIE EI CAS CSCD 2021年第1期64-68,共5页
A novel tiled Ti:sapphire(Ti:S)amplifier was experimentally demonstrated with>1 J amplified chirped pulse output.Two Ti:S crystals having dimensions of 14 mm×14 mm×25 mm were tiled as the gain medium in a... A novel tiled Ti:sapphire(Ti:S)amplifier was experimentally demonstrated with>1 J amplified chirped pulse output.Two Ti:S crystals having dimensions of 14 mm×14 mm×25 mm were tiled as the gain medium in a four-pass amplifier.Maximum output energy of 1.18 J was obtained with 2.75 J pump energy.The energy conversion efficiency of the tiled Ti:S amplifier was comparable with a single Ti:S amplifier.The laser pulse having the maximum peak power of 28 TW was obtained after the compressor.Moreover,the influence of the beam gap on the far field was discussed.This novel tiled Ti:S amplifier technique can provide a potential way for 100 PW or EW lasers in the future. 展开更多
关键词 ti:sapphire crystal tiled ti:sapphire amplifier chirped pulse
原文传递
Splicing technology of Ti:sapphire crystals for a high-energy chirped pulse amplifier laser system 被引量:1
18
作者 Yanqi Liu Yuxin Leng +2 位作者 Xiaoming Lu Yi Xu Cheng Wang 《High Power Laser Science and Engineering》 SCIE CAS 2014年第2期1-8,共8页
We develop a splicing technology of Ti:sapphire crystals for a high-energy chirped pulse amplifier laser system that can suppress the parasitic lasing to improve the amplification efficiency compared to a large-size s... We develop a splicing technology of Ti:sapphire crystals for a high-energy chirped pulse amplifier laser system that can suppress the parasitic lasing to improve the amplification efficiency compared to a large-size single Ti:sapphire crystal amplifier. Theoretical investigations on the characteristics of the amplifier with four splicing Ti:sapphire crystals,such as parasitic-lasing suppression and amplification efficiencies, are carried out. Some possible issues resulting from this splicing technology, including spectral modulation, stretching or splitting of the temporal profile, and the sidelobe generation in the spatial domain(near field and far field), are also investigated. Moreover, the feasibility of the splicing technology is preliminarily demonstrated in an experiment with a small splicing Ti:sapphire crystals amplifier. The temporal profile and spatial distribution of the output pulse from the splicing Ti:sapphire crystal amplifier are discussed in relation to the output pulse from a single Ti:sapphire crystal amplifier. 展开更多
关键词 CHIRPED pulse amplification SPLICING TECHNOLOGY ti:sapphire crystal amplifier
原文传递
Comparison of high-energy multi-pass Ti:sapphire amplifiers with a different Ti-dopant concentration
19
作者 Zebiao Gan Xiaoyan Liang +4 位作者 Lianghong Yu Jiaqi Hong Ming Xu Ying Hang Ruxin Li 《Chinese Optics Letters》 SCIE EI CAS CSCD 2017年第9期66-70,共5页
We experimentally compare the output abilities of lightly and heavily doped Ti:Sapphire(Ti:S) amplifiers with diameters as large as 150 mm. Although a lightly doped Ti:S is more favorable to overcome parasitic la... We experimentally compare the output abilities of lightly and heavily doped Ti:Sapphire(Ti:S) amplifiers with diameters as large as 150 mm. Although a lightly doped Ti:S is more favorable to overcome parasitic lasing(PL)and transverse amplified spontaneous emission(TASE), the self-phase-modulation(SPM) effect becomes more pronounced when a longer crystal is used. Recompression of the amplified, stretched pulses can be seriously affected by the SPM effect. We then propose a temporal multi-pulse pump scheme to suppress PL and TASE in a thin, heavily doped Ti:S crystal. This novel temporal multi-pulse pump technique can find potential applications in 10 PW chirped-pulse amplification laser systems. 展开更多
关键词 ti Comparison of high-energy multi-pass ti:sapphire amplifiers with a different ti-dopant concentration SPM
原文传递
Amplified spontaneous emission and its restraint in a terawatt Ti: sapphire amplifier
20
作者 张伟力 王勇 +2 位作者 王清月 柴路 邢岐荣 《Science China Mathematics》 SCIE 2000年第8期853-860,共8页
Amplified spontaneous emission (ASE) and its restraint in a femtosecond Ti: sapphire chirped-pulse amplifier were investigated. The noises arising from ASE were effectively filtered out in the spatial, temporal and sp... Amplified spontaneous emission (ASE) and its restraint in a femtosecond Ti: sapphire chirped-pulse amplifier were investigated. The noises arising from ASE were effectively filtered out in the spatial, temporal and spectral domain. Pulses as short as 38 fs were amplified to peak power of 1.4 MI. The power ratio between the amplified femtosecond pulse and the ASE was higher than 106: 1. 展开更多
关键词 amplified SPONTANEOUS emission TERAWATT ti: sapphire amplifier.
原文传递
上一页 1 2 9 下一页 到第
使用帮助 返回顶部