Ti(C,N)-TiB2 cermets were fabricated from Ti(C,N), TiB2, Co and WC powder mixtures via a vacuum hot pressing process. The influence of TiB2 content on their microstructures and mechanical properties was investigated. ...Ti(C,N)-TiB2 cermets were fabricated from Ti(C,N), TiB2, Co and WC powder mixtures via a vacuum hot pressing process. The influence of TiB2 content on their microstructures and mechanical properties was investigated. As a result of the elevated TiB2 contents, two types of corerim microstructures were present in the Ti(C,N)-TiB2 cermets, and remarkably improved mechanical properties were achieved. With the increase of TiB2 content, the flexural strength, fracture toughness and hardness of the Ti(C,N)-TiB2 cermets first increased, and then decreased, while their relative density consistently decreased. Attributed to an integration of the intergranular and intrangranular fracture behaviors, the Ti(C,N)-TiB2 cermets with 20 wt% TiB2 content exhibited the best overall properties with the relative density, hardness, fracture toughness and flexural strength at 99.3%, 1 995 HV, 7.92 MPa·m1/2 and 1 114 MPa, respectively. The underlying mechanism for their enhanced properties was studied in detail.展开更多
Ti(C, N)-TiB2 composite coatings were deposited by means of reactive low pressure plasma spraying (LPPS) based on the technology of self-propagating high-temperature synthesis (SHS). The original powders were mixtures...Ti(C, N)-TiB2 composite coatings were deposited by means of reactive low pressure plasma spraying (LPPS) based on the technology of self-propagating high-temperature synthesis (SHS). The original powders were mixtures of Ti and B4C powders. The powders were mixed by ball mill and then spray-dried and at last sintered to be suitable for spraying. Two spraying distances were selected for LPPS. Scanning electron microscopy (SEM) was used to investigate the morphologies of powders for spraying and the microstructures of the coatings. The phase compositions of coatings were measured by X-ray diffraction (XRD). Spray-dried and sintered powders are denser and better bond than only spray-dried powders. The composite coating is composed of TiB2, TiC0.3N0.7, TiN0.3, Ti4N3-x and impurity phase of Ti5Si3 with 300 mm spraying distance. Partly unreacted B4C powders remained in the coating for 240 mm spraying distance, which may be inadequate reaction. No titanium oxide was detected in the composite coating for the relative high vacuum degree of LPPS. The anti-corrosion property of LPPS sprayed Ti(C, N)-TiB2 composite coating with 300 mm spraying distance in electrolytic solution is superior to that of 240 mm spraying distance. Microhardness of Ti(C, N)-TiB2 composite coating is relatively low due to the unconsolidated structure of the coating. The solving methods to improve property of composite coating are finally put forward in the paper.展开更多
基金Funded by the National Natural Science Foundation of China(Nos.21571095,51404157)the Zhejiang Provincial Natural Science Foundation of China(No.LY17E050003)+2 种基金the Taizhou Science and Technology Project(No.15gy54)the Open Research Program of Zhejiang Provincial Key Laboratory for Cutting Tools(No.ZD201501)the Open Foundation of Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology and the Public Projects of Zhejiang Province(Nos.2017C31118,2016C31049)
文摘Ti(C,N)-TiB2 cermets were fabricated from Ti(C,N), TiB2, Co and WC powder mixtures via a vacuum hot pressing process. The influence of TiB2 content on their microstructures and mechanical properties was investigated. As a result of the elevated TiB2 contents, two types of corerim microstructures were present in the Ti(C,N)-TiB2 cermets, and remarkably improved mechanical properties were achieved. With the increase of TiB2 content, the flexural strength, fracture toughness and hardness of the Ti(C,N)-TiB2 cermets first increased, and then decreased, while their relative density consistently decreased. Attributed to an integration of the intergranular and intrangranular fracture behaviors, the Ti(C,N)-TiB2 cermets with 20 wt% TiB2 content exhibited the best overall properties with the relative density, hardness, fracture toughness and flexural strength at 99.3%, 1 995 HV, 7.92 MPa·m1/2 and 1 114 MPa, respectively. The underlying mechanism for their enhanced properties was studied in detail.
文摘Ti(C, N)-TiB2 composite coatings were deposited by means of reactive low pressure plasma spraying (LPPS) based on the technology of self-propagating high-temperature synthesis (SHS). The original powders were mixtures of Ti and B4C powders. The powders were mixed by ball mill and then spray-dried and at last sintered to be suitable for spraying. Two spraying distances were selected for LPPS. Scanning electron microscopy (SEM) was used to investigate the morphologies of powders for spraying and the microstructures of the coatings. The phase compositions of coatings were measured by X-ray diffraction (XRD). Spray-dried and sintered powders are denser and better bond than only spray-dried powders. The composite coating is composed of TiB2, TiC0.3N0.7, TiN0.3, Ti4N3-x and impurity phase of Ti5Si3 with 300 mm spraying distance. Partly unreacted B4C powders remained in the coating for 240 mm spraying distance, which may be inadequate reaction. No titanium oxide was detected in the composite coating for the relative high vacuum degree of LPPS. The anti-corrosion property of LPPS sprayed Ti(C, N)-TiB2 composite coating with 300 mm spraying distance in electrolytic solution is superior to that of 240 mm spraying distance. Microhardness of Ti(C, N)-TiB2 composite coating is relatively low due to the unconsolidated structure of the coating. The solving methods to improve property of composite coating are finally put forward in the paper.
