Detection of weld defects using real-time monitoring and controlling algorithm is of the significant task in manufacturing industries due to the increased production and liability costs that result when weld defects a...Detection of weld defects using real-time monitoring and controlling algorithm is of the significant task in manufacturing industries due to the increased production and liability costs that result when weld defects are not identified early in the production cycle.Monitoring and controlling for robotic arc welding process employed should be reliable,flexible and cost-effective in non-clean,high-volume production environments.Also,the robotic welding system has been utilized a complex jigging and mechanical devices to move the workpiece which related to the stationary welding head for getting higher efficiency and lower costs.To develop the fully robotic welding system,people make use of their senses of sound and/or sight to collect welding information,and take the necessary corrective measurements to ensure the weld quality after processing is satisfactory.Therefore,it is really required that the monitoring and controlling algorithm of sensors for increasing effectiveness in the robotic welding process has been developed.In this paper,bead-on-plate welding using an infrared thermography in the robotic GMA(Gas Metal Arc)welding process has been performed to study the effects of welding parameters on thermal profile characteristics and find the optimal offset distance which applied for monitoring and controlling of welding quality such as bead height.The analysis for correlation between temperature distributions at three offset distance and bead height which based on the regression analysis such as Standard Error of Estimate(SEE),the coefficient of correlation(R)and coefficient of determination(R2)and(Predictive Ability of Model)has been done.The infra-red sensor is useful for monitoring the isotherm radii that arise during the robotic welding process and identifying bead height as welding quality.展开更多
For ground source heat utilization systems, pile heat exchangers are sometimes used. In order for these systems to achieve high performance, control of the system dynamics is important, and the underground temperature...For ground source heat utilization systems, pile heat exchangers are sometimes used. In order for these systems to achieve high performance, control of the system dynamics is important, and the underground temperature must he known. Typically, underground temperature is measured using a thermometer in a borehole. However, in the case of pile heat exchangers, a different method is required, making the system expensive to set up. To overcome this problem, the installation of underground thermometers in the heat exchanger piles themselves is proposed in the present study. The proposed thermometer system consists of thermocouples packed in grout such as silica sand within the piles. However, there is a possibility of measurement errors due to vertical thermal conduction in the steel pipes, and it is important to estimate the measurement accuracy before the development of this system. In the present study, the measurement accuracy is estimated using numerical simulations and then confirmed experimentally. The underground temperature profiles inside and outside the pile are compared. The results indicate that the proposed system offers sufficient accuracy for application to pile heat exchangers.展开更多
Rare earth co-doped phosphor for fluorescence intensity ratio(FIR) thermometer has gained increasing attention in recent years. Herein, the novel Tb^(3+)and Eu^(3+)co-doped K_(3)SrBi(P_(2)O_(7))_(2)(KSBP) phosphate ph...Rare earth co-doped phosphor for fluorescence intensity ratio(FIR) thermometer has gained increasing attention in recent years. Herein, the novel Tb^(3+)and Eu^(3+)co-doped K_(3)SrBi(P_(2)O_(7))_(2)(KSBP) phosphate phosphors were reported. The crystal structure of the title phosphor was determined using Rietveld refinement and proved to have a three-dimensional structure. The time-resolved spectroscopy reveals that there is almost no energy transfer between Tb^(3+)and Eu^(3+). More importantly, Tb^(3+)and Eu^(3+)emissions show different thermal quenching behaviors, which claims the potential of this material for application in optical thermometer. The FIR of the typical KSBP:0.02Tb^(3+),0.04Eu^(3+)sample demonstrates a polynomial relationship as a function of temperature and the absolute and relative sensitivity are0.025 K^(-1) and 0.59%/K, respectively. In general, our study reports a novel and potential KSBP:Tb^(3+),Eu^(3+)phosphate phosphor that is promising for use in high-sensitive FIR thermometers.展开更多
以METOP-A、Suomi-NPP历史资料作为参照,系统分析比较了2008—2020年4颗风云三号卫星的微波温度计(Microwave Temperature Sounder, MWTS)再定标历史资料质量。结果表明,4颗卫星的MWTS探测性能稳步上升,再定标数据集有效消除了遥感仪器...以METOP-A、Suomi-NPP历史资料作为参照,系统分析比较了2008—2020年4颗风云三号卫星的微波温度计(Microwave Temperature Sounder, MWTS)再定标历史资料质量。结果表明,4颗卫星的MWTS探测性能稳步上升,再定标数据集有效消除了遥感仪器在轨期间数据异常跳变、寿命期内遥感仪器辐射响应衰变、不同卫星间的辐射定标差异等因素影响,大幅提升了MWTS历史数据集的准确性和均匀性,使得再定标后的对流层和平流层通道数据与国外同类型仪器数据偏差在±0.1 K范围内。本文还重点分析比较了对流层中高层和平流层低层两个探测通道,结果表明FY-3D MWTS再定标数据和美国NOAA卫星应用研究中心STAR长序列数据集针对中高层大气的表现类似,平均亮温在时间变化和空间分布具有相似的特征,月均全球高空亮温年变化趋势差异最大为0.002 4。因此,2020年之后的FY-3D再定标数据,可以接续STAR长序列数据集,用于中高层大气的温度变化检测与分析。展开更多
From 2019 to 2021,China Seismic Experimental Site has built twelve 300 m deep well multi-measurement comprehensive observation stations in the cross-fault area of the Aninghe-Zemuhe fault zone,integrating BBVS120 very...From 2019 to 2021,China Seismic Experimental Site has built twelve 300 m deep well multi-measurement comprehensive observation stations in the cross-fault area of the Aninghe-Zemuhe fault zone,integrating BBVS120 very broadband borehole seismometer,RZB four-gauge borehole strainmeter and geothermometer with resolution up to 0.0001℃.The borehole diameter is 150 mm and the inner diameter of the sleeve is 130 mm.The multi-item integrated observation system is divided into two parts:underground and surface.The downhole part is mainly composed of sensor and power supply signal isolation.展开更多
文摘Detection of weld defects using real-time monitoring and controlling algorithm is of the significant task in manufacturing industries due to the increased production and liability costs that result when weld defects are not identified early in the production cycle.Monitoring and controlling for robotic arc welding process employed should be reliable,flexible and cost-effective in non-clean,high-volume production environments.Also,the robotic welding system has been utilized a complex jigging and mechanical devices to move the workpiece which related to the stationary welding head for getting higher efficiency and lower costs.To develop the fully robotic welding system,people make use of their senses of sound and/or sight to collect welding information,and take the necessary corrective measurements to ensure the weld quality after processing is satisfactory.Therefore,it is really required that the monitoring and controlling algorithm of sensors for increasing effectiveness in the robotic welding process has been developed.In this paper,bead-on-plate welding using an infrared thermography in the robotic GMA(Gas Metal Arc)welding process has been performed to study the effects of welding parameters on thermal profile characteristics and find the optimal offset distance which applied for monitoring and controlling of welding quality such as bead height.The analysis for correlation between temperature distributions at three offset distance and bead height which based on the regression analysis such as Standard Error of Estimate(SEE),the coefficient of correlation(R)and coefficient of determination(R2)and(Predictive Ability of Model)has been done.The infra-red sensor is useful for monitoring the isotherm radii that arise during the robotic welding process and identifying bead height as welding quality.
文摘For ground source heat utilization systems, pile heat exchangers are sometimes used. In order for these systems to achieve high performance, control of the system dynamics is important, and the underground temperature must he known. Typically, underground temperature is measured using a thermometer in a borehole. However, in the case of pile heat exchangers, a different method is required, making the system expensive to set up. To overcome this problem, the installation of underground thermometers in the heat exchanger piles themselves is proposed in the present study. The proposed thermometer system consists of thermocouples packed in grout such as silica sand within the piles. However, there is a possibility of measurement errors due to vertical thermal conduction in the steel pipes, and it is important to estimate the measurement accuracy before the development of this system. In the present study, the measurement accuracy is estimated using numerical simulations and then confirmed experimentally. The underground temperature profiles inside and outside the pile are compared. The results indicate that the proposed system offers sufficient accuracy for application to pile heat exchangers.
基金Project supported by the National Natural Science Foundation of China(52072348 and 52104272)Scientific Research Start-up Fund of Anhui Polytechnic University(2020YQQ053)+1 种基金Scientific Research Project of Anhui Polytechnic University(Xjky2020083)Innovation and Entrepreneurship Education and Training Project for Anhui Provincial College Students(S202110363258)。
文摘Rare earth co-doped phosphor for fluorescence intensity ratio(FIR) thermometer has gained increasing attention in recent years. Herein, the novel Tb^(3+)and Eu^(3+)co-doped K_(3)SrBi(P_(2)O_(7))_(2)(KSBP) phosphate phosphors were reported. The crystal structure of the title phosphor was determined using Rietveld refinement and proved to have a three-dimensional structure. The time-resolved spectroscopy reveals that there is almost no energy transfer between Tb^(3+)and Eu^(3+). More importantly, Tb^(3+)and Eu^(3+)emissions show different thermal quenching behaviors, which claims the potential of this material for application in optical thermometer. The FIR of the typical KSBP:0.02Tb^(3+),0.04Eu^(3+)sample demonstrates a polynomial relationship as a function of temperature and the absolute and relative sensitivity are0.025 K^(-1) and 0.59%/K, respectively. In general, our study reports a novel and potential KSBP:Tb^(3+),Eu^(3+)phosphate phosphor that is promising for use in high-sensitive FIR thermometers.
基金funded by National Key Research and Development Project(Grant No.2022YFC2204301)the Special Fund of the Institute of Earthquake Forecasting,China Earthquake Administration(Grant No.CEAIEF2022030105).
文摘From 2019 to 2021,China Seismic Experimental Site has built twelve 300 m deep well multi-measurement comprehensive observation stations in the cross-fault area of the Aninghe-Zemuhe fault zone,integrating BBVS120 very broadband borehole seismometer,RZB four-gauge borehole strainmeter and geothermometer with resolution up to 0.0001℃.The borehole diameter is 150 mm and the inner diameter of the sleeve is 130 mm.The multi-item integrated observation system is divided into two parts:underground and surface.The downhole part is mainly composed of sensor and power supply signal isolation.
