WO2 and TiO2 colMds were synthesized by the hydrolysis technique and part of the TiO2 colloid was treated by means of the hydrothermal method. The photochromic performances of the resulting materials obtained via comb...WO2 and TiO2 colMds were synthesized by the hydrolysis technique and part of the TiO2 colloid was treated by means of the hydrothermal method. The photochromic performances of the resulting materials obtained via combining the WO3 colloid with the treated TiO2 colloid and the non-treated TiO2 colloid, respectively, are very different. The TiO2 colloid without hydrothermal treatment can effectively improve the photochromic performance of the WO3colloid. The TiO2 nanoparticles were investigated in detail by XRD, TEM, surface photovohage spectra（SPS） and field-induced surface photovoltage spectrometry（FISPS）. The photochromism mechanism of WO3 colloid is discussed.展开更多
A new absorbent of nanometer-size TiO2 colloid for Cu（Ⅱ ） was studied in this work. The adsorption rate could reach above 99% when the pH values were at the range of 5-6. The adsorption balance time, adsorption cap...A new absorbent of nanometer-size TiO2 colloid for Cu（Ⅱ ） was studied in this work. The adsorption rate could reach above 99% when the pH values were at the range of 5-6. The adsorption balance time, adsorption capacities, and the eluent were investigated. A novel method of trace Cu（ Ⅱ ） preconcentration and separation with nanometer-size titanium dioxide colloid and determination by flame atomic absorption spectrometry （FAAS） was advanced. The detection limit （3a） of the method was 1.15 μg · L^-1, and the relative standard deviation （R.S.D） was 1.53% （n=6）. Environmental sample experiments were also conducted to test the feasibility of the method, and it came out that the recovery rates were between 95.9% and 97.8%.展开更多
A novel method of ultra-trace Cd（Ⅱ） preconcentration with nanometer-size TiO2 colloid and determination by graphite furnace atomic adsorption spectrometry（GFAAS） with slurry sampling was first advanced in this pa...A novel method of ultra-trace Cd（Ⅱ） preconcentration with nanometer-size TiO2 colloid and determination by graphite furnace atomic adsorption spectrometry（GFAAS） with slurry sampling was first advanced in this paper. The adsorption efficiency of nanometer-size TiO2 colloid for ultra-trace Cd（Ⅱ） could reach above 96% in a short time when the pH value was between 5 and 6. Other problems were also studied, such as adsorption capacity, nanometer-size TiO2 colloid dosage, effect of coexistent ions. The detection limit（3σ） and the relative standard deviation （R.S.D） of this method were 4.46.103 μg/L and 1.30%（n=7）, respectively. The method was successfully applied to the analysis of environmental samples with recoveries between 93.8% and 96.4%.展开更多
Yb-doped TiO2 pastes with different Yb/TiO2 weight ratios are prepared in the sol-gel process to obtain dyesensitized solar cells （DSCs）. The nanocrystalline size of Yb-TiO2 becomes smaller and the lattice parameter...Yb-doped TiO2 pastes with different Yb/TiO2 weight ratios are prepared in the sol-gel process to obtain dyesensitized solar cells （DSCs）. The nanocrystalline size of Yb-TiO2 becomes smaller and the lattice parameters change. Lattice distortion is observed and dark current is detected. It is found that a part of Yb existing as insulating oxide Yb2O3 state acts as barrier layers at the electrode-electrolyte interface to suppress charge recombination. A Yb-doped TiO2 electrode applied in DSCs leads to a higher open-circuit voltage and a higher fill factor. How the Yb-doped TiO2 films affect the photovoltaic response of DSCs is discussed.展开更多
In this work, we developed a templated self-assembly approach to fabricate self-supporting Au/TiO2 binary nanoparticles-nanotubes （NPNTs） for the first time. The stable Au/TiO2 nanoparticles colloids were pre-synthe...In this work, we developed a templated self-assembly approach to fabricate self-supporting Au/TiO2 binary nanoparticles-nanotubes （NPNTs） for the first time. The stable Au/TiO2 nanoparticles colloids were pre-synthesized and then deposited onto an AAO template, following by a mild calcination process. Au/TiO2 binary NPNTs can be achieved after removing the AAO template by NaOH solution. In addition, Au/TiO2 NPNTs with different thicknesses and size distributions could be achieved by tailoring the process parameters, such as the molar ratio of AuNPs to TiO2NPs, deposition modes and calcinations conditions. Therefore, these findings made controllable formation of Au/TiO2 NPNTs attractive for promising fabrication methodologies of metal/metal oxides NPNTs.展开更多
A facile approach was developed to prepare highly dispersed TiO2 nanoparticles with selected phase. The crystallization phase of the nanoparticles can be easily tuned from anatase to rutile by the dosage of hydrochlor...A facile approach was developed to prepare highly dispersed TiO2 nanoparticles with selected phase. The crystallization phase of the nanoparticles can be easily tuned from anatase to rutile by the dosage of hydrochloric acid in the reaction system. The crystallite size of the as-prepared anatase TiO2 nanoparticles was ca. 3.2 nm with high dispersion. A transparent TiO2 colloid was obtained by dispersing the as-prepared anatase TiO2 nanoparticles in deionized water without any organic additives added. The concentration of TiO2-H2O colloid can be as high as 1600 g/L. The optical transmittance of TiO2-H2O colloid with a low concentration was nearly 100% in the visible region. Furthermore, anatase TiO2 nanoparticles（TiO2-NPs） showed superior photocatalytic performance compared to rutile TiO2-NPs.展开更多
文摘WO2 and TiO2 colMds were synthesized by the hydrolysis technique and part of the TiO2 colloid was treated by means of the hydrothermal method. The photochromic performances of the resulting materials obtained via combining the WO3 colloid with the treated TiO2 colloid and the non-treated TiO2 colloid, respectively, are very different. The TiO2 colloid without hydrothermal treatment can effectively improve the photochromic performance of the WO3colloid. The TiO2 nanoparticles were investigated in detail by XRD, TEM, surface photovohage spectra（SPS） and field-induced surface photovoltage spectrometry（FISPS）. The photochromism mechanism of WO3 colloid is discussed.
基金Supported by the Natural Science Foundation of Hubei Province(2006ABA236)
文摘A new absorbent of nanometer-size TiO2 colloid for Cu（Ⅱ ） was studied in this work. The adsorption rate could reach above 99% when the pH values were at the range of 5-6. The adsorption balance time, adsorption capacities, and the eluent were investigated. A novel method of trace Cu（ Ⅱ ） preconcentration and separation with nanometer-size titanium dioxide colloid and determination by flame atomic absorption spectrometry （FAAS） was advanced. The detection limit （3a） of the method was 1.15 μg · L^-1, and the relative standard deviation （R.S.D） was 1.53% （n=6）. Environmental sample experiments were also conducted to test the feasibility of the method, and it came out that the recovery rates were between 95.9% and 97.8%.
文摘A novel method of ultra-trace Cd（Ⅱ） preconcentration with nanometer-size TiO2 colloid and determination by graphite furnace atomic adsorption spectrometry（GFAAS） with slurry sampling was first advanced in this paper. The adsorption efficiency of nanometer-size TiO2 colloid for ultra-trace Cd（Ⅱ） could reach above 96% in a short time when the pH value was between 5 and 6. Other problems were also studied, such as adsorption capacity, nanometer-size TiO2 colloid dosage, effect of coexistent ions. The detection limit（3σ） and the relative standard deviation （R.S.D） of this method were 4.46.103 μg/L and 1.30%（n=7）, respectively. The method was successfully applied to the analysis of environmental samples with recoveries between 93.8% and 96.4%.
文摘Yb-doped TiO2 pastes with different Yb/TiO2 weight ratios are prepared in the sol-gel process to obtain dyesensitized solar cells （DSCs）. The nanocrystalline size of Yb-TiO2 becomes smaller and the lattice parameters change. Lattice distortion is observed and dark current is detected. It is found that a part of Yb existing as insulating oxide Yb2O3 state acts as barrier layers at the electrode-electrolyte interface to suppress charge recombination. A Yb-doped TiO2 electrode applied in DSCs leads to a higher open-circuit voltage and a higher fill factor. How the Yb-doped TiO2 films affect the photovoltaic response of DSCs is discussed.
基金supports provided by National Natural Science Foundation of China(No. 51104194)Doctoral Fund of Ministry of Education of China(No. 20110191120014)+1 种基金No.43 Scientific Research Foundation for the Returned Overseas Chinese ScholarsState Education Ministry and Fundamental Research Funds for the Central Universities(Nos. CDJZR13130035,CDJZR12248801 and CDJZR12135501.Chongqing University,China)
文摘In this work, we developed a templated self-assembly approach to fabricate self-supporting Au/TiO2 binary nanoparticles-nanotubes （NPNTs） for the first time. The stable Au/TiO2 nanoparticles colloids were pre-synthesized and then deposited onto an AAO template, following by a mild calcination process. Au/TiO2 binary NPNTs can be achieved after removing the AAO template by NaOH solution. In addition, Au/TiO2 NPNTs with different thicknesses and size distributions could be achieved by tailoring the process parameters, such as the molar ratio of AuNPs to TiO2NPs, deposition modes and calcinations conditions. Therefore, these findings made controllable formation of Au/TiO2 NPNTs attractive for promising fabrication methodologies of metal/metal oxides NPNTs.
基金Supported by the National Natural Science Foundation of China（Nos.21071058, 21371066, 21301067）.
文摘A facile approach was developed to prepare highly dispersed TiO2 nanoparticles with selected phase. The crystallization phase of the nanoparticles can be easily tuned from anatase to rutile by the dosage of hydrochloric acid in the reaction system. The crystallite size of the as-prepared anatase TiO2 nanoparticles was ca. 3.2 nm with high dispersion. A transparent TiO2 colloid was obtained by dispersing the as-prepared anatase TiO2 nanoparticles in deionized water without any organic additives added. The concentration of TiO2-H2O colloid can be as high as 1600 g/L. The optical transmittance of TiO2-H2O colloid with a low concentration was nearly 100% in the visible region. Furthermore, anatase TiO2 nanoparticles（TiO2-NPs） showed superior photocatalytic performance compared to rutile TiO2-NPs.
