The effects of atmospheres and precursors on MnOx/TiO2 catalysts were studied, which were prepared by the impregnation method and tested for their NOx conversion activity in ammonia selective catalytic reduction （NH3...The effects of atmospheres and precursors on MnOx/TiO2 catalysts were studied, which were prepared by the impregnation method and tested for their NOx conversion activity in ammonia selective catalytic reduction （NH3-SCR） reactions. Results showed that the manganese carbonate （MC） precursor caused mainly Mn2O3, while the manganese nitrate （MN） precursor resulted primarily in MnO2 and the manganese sulfate （MS） precursor was unchanged. The manganese acetate （MA） precursor leaded obtaining a mixture of Mn2O3 and Mn304. NOn conversion decreased in the following order： MA/TiO2 〉 MC/TiO2 〉 MN/TiO2 〉 MS/TiO2 〉 P25, with a calcination temperature of 773 K in air. Catalysts that were prepared by MA and calcined in oxygen performed strong interaction between Ti and Mn, while MnTiO3 was observed. Compared to the catalysts calcined in nitrogen, those calcined in oxygen had larger diameter and smaller surface area and pore. Catalysts that were prepared by MA and calcined in nitrogen tended to gain higher denitration rates than those in air, since they could be prepared with significant specific surface areas. NO., conversion decreased with calcination atmospheres： Nitrogen〉 Air〉 Oxygen. Meanwhile, amorphous Mn2O3 turned into crystalline Mn2O3, when the temperatures increased from 673 to 873 K.展开更多
FeTi_1-O_2（= 0.00,0.05,0.10） nanocomposites are synthesized using a sol-gel method involving an ethanol solvent in the presence of ethylene glycol as the stabilizer,and acetic acid as the chemical reagent.Their stru...FeTi_1-O_2（= 0.00,0.05,0.10） nanocomposites are synthesized using a sol-gel method involving an ethanol solvent in the presence of ethylene glycol as the stabilizer,and acetic acid as the chemical reagent.Their structural and optical analyses are studied to reveal their physicochemical properties.Using the x-ray diffractometer（XRD）analysis,the size of the nanoparticles（NPs） is found to be 18-32 nm,where the size of the NPs decreases down to 18 nm when Fe impurity of up to 10% is added,whereas their structure remains unchanged.The results also indicate that the structure of the NPs is tetragonal in the anatase phase.The Fourier transform infrared spectroscopy analysis suggests the presence of a vibration bond（Ti-O） in the sample.The photoluminescence analysis indicates that the diffusion of Fe^（3＋） ions into the TiO_2 matrix results in a decreasing electron-hole recombination,and increases the photocatalytic properties,where the best efficiency appears at an impurity of10%.The UV-diffuse reflection spectroscopy analysis indicates that with the elevation of iron impurity,the band gap value decreases from 3.47 eV for the pure sample to 2.95 eV for the 10 mol% Fe-doped TiO_2 NPs.展开更多
以TiCl_3(3THF)为原料合成脒基钛(Ⅲ)配合物1,将其作为前驱体通过LPCVD沉积N/C-TiO_2薄膜。利用1HNMR、元素分析以及热重分析(TGA)探究配合物1的结构和热化学性质。结果表明,配合物1具有良好的热稳定性和合适的挥发性,满足CVD的要求。通...以TiCl_3(3THF)为原料合成脒基钛(Ⅲ)配合物1,将其作为前驱体通过LPCVD沉积N/C-TiO_2薄膜。利用1HNMR、元素分析以及热重分析(TGA)探究配合物1的结构和热化学性质。结果表明,配合物1具有良好的热稳定性和合适的挥发性,满足CVD的要求。通过EDS和UV-Vis吸收光谱表征了薄膜的成分及光学性能,结果表明,当沉积温度为350℃时,N/C-TiO_2薄膜的N、C质量分数最高,其禁带宽度降低为2. 82 e V,对可见光的吸收最强。与纯的二氧化钛薄膜相比,N/C-TiO_2薄膜对亚甲基蓝的降解率显著提高到90%。展开更多
基金Funded by the National "Twelfth Five-Year" Plan for Science&Technology Support of China(No.2011BAE29B02))
文摘The effects of atmospheres and precursors on MnOx/TiO2 catalysts were studied, which were prepared by the impregnation method and tested for their NOx conversion activity in ammonia selective catalytic reduction （NH3-SCR） reactions. Results showed that the manganese carbonate （MC） precursor caused mainly Mn2O3, while the manganese nitrate （MN） precursor resulted primarily in MnO2 and the manganese sulfate （MS） precursor was unchanged. The manganese acetate （MA） precursor leaded obtaining a mixture of Mn2O3 and Mn304. NOn conversion decreased in the following order： MA/TiO2 〉 MC/TiO2 〉 MN/TiO2 〉 MS/TiO2 〉 P25, with a calcination temperature of 773 K in air. Catalysts that were prepared by MA and calcined in oxygen performed strong interaction between Ti and Mn, while MnTiO3 was observed. Compared to the catalysts calcined in nitrogen, those calcined in oxygen had larger diameter and smaller surface area and pore. Catalysts that were prepared by MA and calcined in nitrogen tended to gain higher denitration rates than those in air, since they could be prepared with significant specific surface areas. NO., conversion decreased with calcination atmospheres： Nitrogen〉 Air〉 Oxygen. Meanwhile, amorphous Mn2O3 turned into crystalline Mn2O3, when the temperatures increased from 673 to 873 K.
文摘FeTi_1-O_2（= 0.00,0.05,0.10） nanocomposites are synthesized using a sol-gel method involving an ethanol solvent in the presence of ethylene glycol as the stabilizer,and acetic acid as the chemical reagent.Their structural and optical analyses are studied to reveal their physicochemical properties.Using the x-ray diffractometer（XRD）analysis,the size of the nanoparticles（NPs） is found to be 18-32 nm,where the size of the NPs decreases down to 18 nm when Fe impurity of up to 10% is added,whereas their structure remains unchanged.The results also indicate that the structure of the NPs is tetragonal in the anatase phase.The Fourier transform infrared spectroscopy analysis suggests the presence of a vibration bond（Ti-O） in the sample.The photoluminescence analysis indicates that the diffusion of Fe^（3＋） ions into the TiO_2 matrix results in a decreasing electron-hole recombination,and increases the photocatalytic properties,where the best efficiency appears at an impurity of10%.The UV-diffuse reflection spectroscopy analysis indicates that with the elevation of iron impurity,the band gap value decreases from 3.47 eV for the pure sample to 2.95 eV for the 10 mol% Fe-doped TiO_2 NPs.
基金Supported by Fundamental Research Funds for Central Universities(HEUCF201403002)Advanced Technique Project Funds of the Manufacture and Information Ministry
文摘以TiCl_3(3THF)为原料合成脒基钛(Ⅲ)配合物1,将其作为前驱体通过LPCVD沉积N/C-TiO_2薄膜。利用1HNMR、元素分析以及热重分析(TGA)探究配合物1的结构和热化学性质。结果表明,配合物1具有良好的热稳定性和合适的挥发性,满足CVD的要求。通过EDS和UV-Vis吸收光谱表征了薄膜的成分及光学性能,结果表明,当沉积温度为350℃时,N/C-TiO_2薄膜的N、C质量分数最高,其禁带宽度降低为2. 82 e V,对可见光的吸收最强。与纯的二氧化钛薄膜相比,N/C-TiO_2薄膜对亚甲基蓝的降解率显著提高到90%。
