Optimal Iterative Learning Control for Batch Processes Based on Linear Time-varying Perturbation Model

A batch-to-batch optimal iterative learning control （ILC） strategy for the tracking control of product quality in batch processes is presented. The linear time-varying perturbation （LTVP） model is built for product quality around the nominal trajectories. To address problems of model-plant mismatches, model prediction errors in the previous batch run are added to the model predictions for the current batch run. Then tracking error transition models can be built, and the ILC law with direct error feedback is explicitly obtained, A rigorous theorem is proposed, to prove the convergence of tracking error under ILC, The proposed methodology is illustrated on a typical batch reactor and the results show that the performance of trajectory tracking is gradually improved by the ILC.

On the Application of Mixed Models of Probability and Convex Set for Time-Variant Reliability Analysis

In time-variant reliability problems,there are a lot of uncertain variables from different sources.Therefore,it is important to consider these uncertainties in engineering.In addition,time-variant reliability problems typically involve a complexmultilevel nested optimization problem,which can result in an enormous amount of computation.To this end,this paper studies the time-variant reliability evaluation of structures with stochastic and bounded uncertainties using a mixed probability and convex set model.In this method,the stochastic process of a limit-state function with mixed uncertain parameters is first discretized and then converted into a timeindependent reliability problem.Further,to solve the double nested optimization problem in hybrid reliability calculation,an efficient iterative scheme is designed in standard uncertainty space to determine the most probable point(MPP).The limit state function is linearized at these points,and an innovative random variable is defined to solve the equivalent static reliability analysis model.The effectiveness of the proposed method is verified by two benchmark numerical examples and a practical engineering problem.

Comparison of isotope-based linear and Bayesian mixing models in determining moisture recycling ratio

Stable water isotopes are natural tracers quantifying the contribution of moisture recycling to local precipitation,i.e.,the moisture recycling ratio,but various isotope-based models usually lead to different results,which affects the accuracy of local moisture recycling.In this study,a total of 18 stations from four typical areas in China were selected to compare the performance of isotope-based linear and Bayesian mixing models and to determine local moisture recycling ratio.Among the three vapor sources including advection,transpiration,and surface evaporation,the advection vapor usually played a dominant role,and the contribution of surface evaporation was less than that of transpiration.When the abnormal values were ignored,the arithmetic averages of differences between isotope-based linear and the Bayesian mixing models were 0.9%for transpiration,0.2%for surface evaporation,and–1.1%for advection,respectively,and the medians were 0.5%,0.2%,and–0.8%,respectively.The importance of transpiration was slightly less for most cases when the Bayesian mixing model was applied,and the contribution of advection was relatively larger.The Bayesian mixing model was found to perform better in determining an efficient solution since linear model sometimes resulted in negative contribution ratios.Sensitivity test with two isotope scenarios indicated that the Bayesian model had a relatively low sensitivity to the changes in isotope input,and it was important to accurately estimate the isotopes in precipitation vapor.Generally,the Bayesian mixing model should be recommended instead of a linear model.The findings are useful for understanding the performance of isotope-based linear and Bayesian mixing models under various climate backgrounds.

Time-Varying Mesh Stiffness Calculation and Dynamic Modeling of Spiral Bevel Gear with Spalling Defects

Time-varying mesh stiffness(TVMS)is a vital internal excitation source for the spiral bevel gear(SBG)transmission system.Spalling defect often causes decrease in gear mesh stiffness and changes the dynamic characteristics of the gear system,which further increases noise and vibration.This paper aims to calculate the TVMS and establish dynamic model of SBG with spalling defect.In this study,a novel analytical model based on slice method is proposed to calculate the TVMS of SBG considering spalling defect.Subsequently,the influence of spalling defect on the TVMS is studied through a numerical simulation,and the proposed analytical model is verified by a finite element model.Besides,an 8-degrees-of-freedom dynamic model is established for SBG transmission system.Incorporating the spalling defect into TVMS,the dynamic responses of spalled SBG are analyzed.The numerical results indicate that spalling defect would cause periodic impact in time domain.Finally,an experiment is designed to verify the proposed dynamic model.The experimental results show that the spalling defect makes the response characterized by periodic impact with the rotating frequency of spalled pinion.

ICA Based Identification of Time-Varying Linear Causal Model

Recently, several approaches have been proposed to discover the causality of the time-independent or fixed causal model. However, in many realistic applications, especially in economics and neuroscience, causality among variables might be time-varying. A time-varying linear causal model with non-Gaussian noise is considered and the estimation of the causal model from observational data is focused. Firstly, an independent component analysis(ICA) based two stage method is proposed to estimate the time-varying causal coefficients. It shows that, under appropriate assumptions, the time varying coefficients in the proposed model can be estimated by the proposed approach, and results of experiment on artificial data show the effectiveness of the proposed approach. And then, the granger causality test is used to ascertain the causal direction among the variables. Finally, the new approach is applied to the real stock data to identify the causality among three stock indices and the result is consistent with common sense.

Dynamics of a Nonautonomous Plant Disease Model with General Nonlinear Incidence Rate and Time-Varying Impulse

In this paper, for controlling the spread of plant diseases, a nonautonomous SEIS (Susceptible → Exposed → Infectious → Susceptible) epidemic model with a general nonlinear incidence rate and time-varying impulsive control strategy is proposed and investigated. This novel model could result in an objective criterion on how to control plant disease transmission by replanting of healthy plants and removal of infected plants. Using the method of small amplitude perturbation, the sufficient conditions under which guarantee the globally attractive of the disease-free periodic solution and the permanence of the disease are obtained, that is, the disease dies out if R12>1.

Database-oriented storage based on LMDB and linear octree for massive block model

Data organization requires high efficiency for large amount of data applied in the digital mine system. A new method of storing massive data of block model is proposed to meet the characteristics of the database, including ACID-compliant, concurrency support, data sharing, and efficient access. Each block model is organized by linear octree, stored in LMDB（lightning memory-mapped database）. Geological attribute can be queried at any point of 3D space by comparison algorithm of location code and conversion algorithm from address code of geometry space to location code of storage. The performance and robustness of querying geological attribute at 3D spatial region are enhanced greatly by the transformation from 3D to 2D and the method of 2D grid scanning to screen the inner and outer points. Experimental results showed that this method can access the massive data of block model, meeting the database characteristics. The method with LMDB is at least 3 times faster than that with etree, especially when it is used to read. In addition, the larger the amount of data is processed, the more efficient the method would be.

Unified Breakdown Model of SOI RESURF Device with Uniform/Step/Linear Doping Profile

A unified breakdown model of SOI RESURF device with uniform,step,or linear drift region doping profile is firstly proposed.By the model,the electric field distribution and breakdown voltage are researched in detail for the step numbers from 0 to infinity.The critic electric field as the function of the geometry parameters and doping profile is derived.For the thick film device,linear doping profile can be replaced by a single or two steps doping profile in the drift region due to a considerable uniformly lateral electric field,almost ideal breakdown voltage,and simplified design and fabrication.The availability of the proposed model is verified by the good accordance among the analytical results,numerical simulations,and reported experiments.

A New Class of Biased Linear Estimators in Deficient-rank Linear Models

In this paper, we define a new class of biased linear estimators of the vector of unknown parameters in the deficient_rank linear model based on the spectral decomposition expression of the best linear minimun bias estimator. Some important properties are discussed. By appropriate choices of bias parameters, we construct many interested and useful biased linear estimators, which are the extension of ordinary biased linear estimators in the full_rank linear model to the deficient_rank linear model. At last, we give a numerical example in geodetic adjustment.

T-S-fuzzy-model-based quantized control for nonlinear networked control systems

In order to overcome data-quantization, networked-induced delay, network packet dropouts and wrong sequences in the nonlinear networked control system, a novel nonlinear networked control system model is built by the T-S fuzzy method. Two time-varying quantizers are added in the model. The key analysis steps in the method are to construct an improved interval-delay-dependent Lyapunov functional and to introduce the free-weighting matrix. By making use of the parallel distributed compensation technology and the convexity of the matrix function, the improved criteria of the stabilization and stability are obtained. Simulation experiments show that the parameters of the controllers and quantizers satisfying a certain performance can be obtained by solving a set of LMIs. The application of the nonlinear mass-spring system is provided to show that the proposed method is effective.

Robustness of Minimum Norm Quadratic Unbiased Estimator of Variance Under the General Linear Model

Necessary and sufficient conditions for equalities between a 2 y′(I-P Xx)y and minimum norm quadratic unbiased estimator of variance under the general linear model, where a 2 is a known positive number, are derived. Further, when the Gauss? Markov estimators and the ordinary least squares estimator are identical, a relative simply equivalent condition is obtained. At last, this condition is applied to an interesting example.

A Study on the Multi-Compartment Linear Circulation Pharmacokinetic Model for the Targeting Drug Delivery System

By analyzing the observed phenomena and the data collected in the study, a multi-compartment linear circulation model for targeting drug delivery system was developed and the function formulas of the drug concentration-time in blood and target organ by computing were figured out. The drug concentration-time curve for target organ can be plotted with reference to the data of drug concentration in blood according to the model. The pharmacokinetic parameters of the drug in target organ could also be obtained. The practicability of the model was further checked by the curves of drug concentration-time in blood and target organ(liver) of liver-targeting nanoparticles in animal tests. Based on the liver drug concentration-time curves calculated by the function formula of the drug in target organ, the pharmacokinetic behavior of the drug in target organ(liver) was analyzed by statistical moment, and its pharmacokinetic parameters in liver were obtained. It is suggested that the (relative targeting index( can be used for quantitative evaluation of the targeting drug delivery systems.

Research on a non-linear chaotic prediction model for urban traffic flow

In order to solve serious urban transport problems, according to the proved chaotic characteristic of traffic flow, a non linear chaotic model to analyze the time series of traffic flow is proposed. This model reconstructs the time series of traffic flow in the phase space firstly, and the correlative information in the traffic flow is extracted richly, on the basis of it, a predicted equation for the reconstructed information is established by using chaotic theory, and for the purpose of obtaining the optimal predicted results, recognition and optimization to the model parameters are done by using genetic algorithm. Practical prediction research of urban traffic flow shows that this model has famous predicted precision, and it can provide exact reference for urban traffic programming and control.

Selection of the Linear Regression Model According to the Parameter Estimation

In this paper, based on the theory of parameter estimation, we give a selection method and, in a sense of a good character of the parameter estimation, we think that it is very reasonable. Moreover, we offer a calculation method of selection statistic and an applied example.

Combined model based on optimized multi-variable grey model and multiple linear regression

The construction method of background value is improved in the original multi-variable grey model （MGM（1,m）） from its source of construction errors. The MGM（1,m） with optimized background value is used to eliminate the random fluctuations or errors of the observational data of all variables, and the combined prediction model together with the multiple linear regression is established in order to improve the simulation and prediction accuracy of the combined model. Finally, a combined model of the MGM（1,2） with optimized background value and the binary linear regression is constructed by an example. The results show that the model has good effects for simulation and prediction.

The Impact of Nonlinear Stability and Instability on the Validity of the Tangent Linear Model

The impact of nonlinear stability and instability on the validity of tangent linear model (TLM) is investigated by comparing its results with those produced by the nonlinear model (NLM) with the identical initial perturbations. The evolutions of different initial perturbations superposed on the nonlinearly stable and unstable basic flows are examined using the two-dimensional quasi-geostrophic models of double periodic-boundary condition and rigid boundary condition. The results indicate that the valid time period of TLM, during which TLM can be utilized to approximate NLM with given accuracy, varies with the magnitudes of the perturbations and the nonlinear stability and instability of the basic flows. The larger the magnitude of the perturbation is, the shorter the valid time period. The more nonlinearly unstable the basic flow is, the shorter the valid time period of TLM. With the double—periodic condition the valid period of the TLM is shorter than that with the rigid—boundary condition. Key words Nonlinear stability and instability - Tangent linear model (TLM) - Validity This work was supported by the National Key Basic Research Project “Research on the Formation Mechanism and Prediction Theory of Severe Synoptic Disasters in China” (No.G1998040910) and the National Natural Science Foundation of China (No.49775262 and No.49823002).

Feedback linearization of the nonlinear model of a small-scale helicopter

In order to design a nonlinear controller for small-scale autonomous helicopters, the dynamic characteristics of a model helicopter are investigated, and an integrated nonlinear model of a small-scale helicopter for hovering control is presented. It is proved that the nonlinear system of the small-scale helicopter can be transformed to a linear system using the dynamic feedback linearization technique. Finally, simulations are carried out to validate the nonlinear controller.

Adaptive nonlinear model predictive control design of a flexible-link manipulator with uncertain parameters

This paper presents a novel adaptive nonlinear model predictive control design for trajectory tracking of flexible-link manipulators consisting of feedback linearization, linear model predictive control, and unscented Kalman filtering. Reducing the nonlinear system to a linear system by feedback linearization simplifies the optimization problem of the model predictive controller significantly, which, however, is no longer linear in the presence of parameter uncertainties and can potentially lead to an undesired dynamical behaviour. An unscented Kalman filter is used to approximate the dynamics of the prediction model by an online parameter estimation, which leads to an adaptation of the optimization problem in each time step and thus to a better prediction and an improved input action. Finally, a detailed fuzzy-arithmetic analysis is performed in order to quantify the effect of the uncertainties on the control structure and to derive robustness assessments. The control structure is applied to a serial manipulator with two flexible links containing uncertain model parameters and acting in three-dimensional space.

Robust Stability and Stabilization of Discrete Singular Systems with Interval Time-varying Delay and Linear Fractional Uncertainty

The robust stability and robust stabilization problems for discrete singular systems with interval time-varying delay and linear fractional uncertainty are discussed. A new delay-dependent criterion is established for the nominal discrete singular delay systems to be regular, causal and stable by employing the linear matrix inequality （LMI） approach. It is shown that the newly proposed criterion can provide less conservative results than some existing ones. Then, with this criterion, the problems of robust stability and robust stabilization for uncertain discrete singular delay systems are solved, and the delay-dependent LMI conditions are obtained. Finally, numerical examples are given to illustrate the effectiveness of the proposed approach.

Contact Analysis and Modeling of Standing Wave Linear Ultrasonic Motor

A contact model for describing the contact mechanics between the stator and slider of the standing wave linear ultrasonic motor was presented. The proposed model starts from the assumption that the vibration characteristics of the stator is not affected by the contact process. A modified friction models was used to analyze the contact problems. Firstly, the dynamic normal contact force, interface friction force, and steady-state characteristics were analyzed. Secondly, the influences of the contact layer material, the dynamic characteristics of the stator, and the pre-load on motor performance were simulated. Finally, to validate the contact model, a linear ultrasonic motor based on in-plane modes was used as an example. The corresponding results show that a set of simulation of motor performances based on the proposed contact mechanism is in good agreement with experimental results. This model is helpful to understanding the operation principle of the standing wave linear motor and thus contributes to the design of these types of motor.