Joint timing synchronization and frequency offset acquisition algorithm for MIMO OFDM systems

For multiple-input multiple-output （MIMO） orthogonal frequency division multiplexing （OFDM） systems, a joint timing synchronization and frequency offset acquisition algorithm based on fractional Fourier transform （FRFT） is proposed. The linear frequency modulation signals superimposed on the data signals are used as the training signals. By performing FRFT on the received signals and searching the peak value of the FRFT results, the receiver can realize timing synchronization and frequency offset acquisition simultaneously. Compared with the existing methods, the proposed algorithm can provide better timing synchronization performance and larger frequency offset acquisition range even under multi-path channels with low signal to noise ratio. Theoretical analysis and simulation results prove this point.

Fiber-based multiple access timing signal synchronization technique

A fiber-based,multiple access timing signal synchronization scheme is demonstrated.By coupling out the bidirectional transmission signals,a highly stable timing signal can be recovered at arbitrary points along the fiber with the help of the loop delay message broadcasted via ethernet from the local module.The experiment is carried out on a 30-km fiber placed in a temperature-controlled box.In one-day period,when the round trip fiber transfer delay fluctuation is60 ns,the fluctuations of the stabilized timing signal from the download and the remote modules were only ±125 ps and±100 ps,respectively.Also,the system error caused by transmission path asymmetry and thermal drift is calibrated,and a100-ps magnitude synchronization accuracy is realized.This method could provide new insights into the construction of a fiber-based time transfer network.

Golay Pair Aided Timing Synchronization Algorithm for Distributed MIMO-OFDM System

In order to solve the problem of inaccurate synchronization for distributed multiple-input multiple-output(MIMO) orthogonal frequency division multiplexing(OFDM) system in both multipath and low signal to noise ratio(SNR) channels, a golay pair aided timing synchronization(GPATS) method is proposed in this paper. A new synchronous training sequence based on the golay pair with guard interval is designed in GPATS method. By utilizing the unique properties of the new training sequence, the different timing point and the inter-transmitter delays(ITD) are obtained at the receiver. Simulation results show that, compared with the traditional synchronization approaches, the proposed algorithm can provide high accuracy in detecting different time offsets caused by the distributed transmitters of the MIMO-OFDM system, especially over multipath and low SNR channels.

A NOVEL ESTIMATION METHOD OF TIMING OFFSET FOR OFDM BASED WLAN SYSTEMS

The conventional timing synchronization methods based on time domain correlation have the problems of timing metric plateau in Additive White Gaussian Noise(AWGN) channel and estimation error in multipath fading channel. To resolve the problems, this paper proposes a novel timing metric using the characteristics of long training symbols in IEEE802.11a and a new timing recovery method based on the new timing metric for Orthogonal Frequency Division MuItiplexing(OFDM)-based WLAN systems. The proposed timing metric is defined as a sum of absolute values of the imaginary parts of all the subcarrier samples. It exhibits a unique characteristic that is very sensitive to the true synchronization point since it has minimum value at the true synchronization point and maximum around the true synchronization point. The simulation results show that the performance of timing synchronization is significantly improved, as a result, the probability of error estimation is lower than 10-4 when Signal-to-Noise Ratio(SNR) is more than 10dB.

Design of Timing Synchronization Software on EAST-NBI

To ensure the uniqueness and recognition of data and make it easy to analyze and process the data of all subsystems of the neutral beam injector （NBI）, it is required that all subsystems have a unified system time. In this paper, the timing synchronization software is presented which is related to many kinds of technologies, such as shared memory, multithreading, TCP protocol and so on. Shared memory helps the server save the information of clients and system time, multithreading can deal with different clients with different threads, the server works under Linux operating system, the client works under Linux operating system and Windows operating system. With the help of this design, synchronization of all subsystems can be achieved in less than one second, and this accuracy is enough for the NBI system and the reliability of data is thus ensured.

Practical Timing Synchronization for Network Dynamics in Large Machine-to-Machine Networks

Efficient multi-machine cooperation and network dynamics still remain open that jeopardize great applications in largescale machine-to-machine(M2M) networks. Among all possible machine cooperation controls, to synchronize tremendous machines in a timing-efficient brings one of the greatest challenge and serves as the foundation for any other network control policies. In this paper, we propose a linear-time synchronization protocol in large M2M networks. Specifically, a closed-form of synchronization rate is provided by developing the statistical bounds of the second smallest eigenvalue of the graph Laplacian matrix. These bounds enable the efficient control of network dynamics, facilitating the timing synchronization in networks. Through a practical study in Metropolis, simulation results confirm our theoretical analysis and provide effective selection of wireless technologies, including Zigbee, Wi-Fi, and cellular systems, with respect to the deployed density of machines. Therefore, this paper successfully demonstrates a practical timing synchronization, to make a breakthrough of network dynamic control in real-world machine systems, such as Internet of Things.

Efficient Timing and Frequency Offset Estimation Scheme for OFDM Systems

A new training symbol weighted by pseudo-noise(PN) sequence is designed and an efficient timing and fre-quency offset estimation scheme for orthogonal frequency division multiplexing(OFDM) systems is proposed. The timing synchronization is accomplished by using the piecewise symmetric conjugate of the primitive training symbol and the good autocorrelation of PN weighted factor. The frequency synchronization is finished by utilizing the training symbol whose PN weighted factor is removed after the timing synchronization. Compared with conventional schemes, the pro-posed scheme can achieve a smaller mean square error and provide a wider frequency acquisition range.

Timing Synchronization Method for Asymmetrically Clipped DC Biased Optical OFDM System

In a typical intensity-modulated direct-detection optical system, the information is carried on the intensity of the optical signal, and therefore can only be positive. Existing synchronization methods for RF-based OFDM system cannot be used directly in asymmetrically clipped DC biased optical of DM (ADO-OFDM) system. In order to solve the above problem, according to the characteristics of ADO-OFDM signal, the modified training symbol is presented. The simulation results show that the modified synchronization method gives good performance.

RL and AHP-Based Multi-Timescale Multi-Clock Source Time Synchronization for Distribution Power Internet of Things

Time synchronization(TS)is crucial for ensuring the secure and reliable functioning of the distribution power Internet of Things(IoT).Multi-clock source time synchronization(MTS)has significant advantages of high reliability and accuracy but still faces challenges such as optimization of the multi-clock source selection and the clock source weight calculation at different timescales,and the coupling of synchronization latency jitter and pulse phase difference.In this paper,the multi-timescale MTS model is conducted,and the reinforcement learning(RL)and analytic hierarchy process(AHP)-based multi-timescale MTS algorithm is designed to improve the weighted summation of synchronization latency jitter standard deviation and average pulse phase difference.Specifically,the multi-clock source selection is optimized based on Softmax in the large timescale,and the clock source weight calculation is optimized based on lower confidence bound-assisted AHP in the small timescale.Simulation shows that the proposed algorithm can effectively reduce time synchronization delay standard deviation and average pulse phase difference.

Effects of Serum Concentration, Synchronization Time and Confluence on the Cell-Cycle Synchronization Efficiency of Goat Fibroblasts

This study aims to evaluate the effect of serum concentration, synchronization time, and confluence degree on the synchronisation efficiency of goat fibroblast cycle. The results indicated that there was no difference in the percentage of nucleated fibroblasts in the G0/G1 stage between serum concentrations of 0.3% and 0.4% (83.89% and 82.69%, respectively, P > 0.05) as well as between serum concentrations of 0.2% and 0.5% (76.95% and 75.46%, respectively, P > 0.05). The percentage of nucleated fibroblasts in the G0/G1 stage was highest at the concentration of 0.3% and lowest in the control group (83.89% vs. 62.67%, P 0.05). The beneficial effect of high confluence was confirmed by the large percentage of nucleated fibroblasts at the G0/G1 stage. The 60% confluency was significantly lower than the 80% and 100% confluency (73.44%, 86.63%, and 87.17%, respectively, P < 0.05). The results indicate that the goat fibroblast cycle synchronization is the most effective at the serum concentration of 0.3%, 72 hours of synchronization and 100% confluency.

Design of IRIG-B(AC) encoder based on FPGA

InterRange Instrumentation Group（IRIG-B（AC））code is usually used in the shooting range test for time information transmission and systems time synchronization.According to IRIG-B（AC）code format and modulation principle,this paper presents IRIG-B（AC）coding circuit design scheme based on field programmable gate array（FPGA）.The B（AC）code signal is generated by AD7245,a digital-to-analog（D/A）converter.After amplified,the signal can be used directly for system time synchronization,and the amplitude of the signal can be adjusted according to different requirements.The IRIG-B（AC）encoder designed has been verified by test.The test results show that it can output accurate time information and has higher practicality.

Design and Implementation of Initial Cell Search in 5G NR Systems

The initial cell search plays an important role during the process of downlink synchronization establishment between the User Equipment(UE) and the base station. In particular, the uncertainty of the synchronization signals on the frequency domain and the flexibility of frame structure configuration have brought great challenges to the initial cell search for the fifth-generation(5G) new radio(NR). To solve this problem, firstly, we analyze the physical layer frame structure of 5G NR systems. Then, by focusing on the knowledge of synchronization signals, the 5G NR cell search process is designed, and the primary synchronization signal(PSS) timing synchronization algorithm is proposed, including a 5G-based coarse synchronization algorithm and conjugate symmetry-based fine synchronization algorithm. Finally, the performance of the proposed cell search algorithm in 5G NR systems is verified through the combination of Digital Signal Processing(DSP) and personal computer(PC). And the MATLAB simulation proves that the proposed algorithm has better performance than the conventional cross-correlation algorithm when a certain frequency offset exists.

Simsync: A Time Synchronization Simulator for Sensor Networks

Time synchronization is a critical middleware service of wireless sensor networks. Researchers have already proposed some time synchronization algorithms. However, due to the demands for various synchronization precision, existing time synchronization algorithms often need to be adapted. So it is necessary to evaluate these adapted algorithms before use. Software simulation is a valid and quick way to do it. In this paper, we present a time synchronization simulator, Simsync, for wireless sensor networks. We decompose the packet delay into 6 delay components and model them separately. The frequency of crystal oscillator is modeled as Gaussian. To testify its effectiveness, we simulate the reference broadcast synchronization algorithm (RBS) and the timing-sync synchronization algorithm (TPSN) on Simsync. Simulated results are also presented and analyzed.

Approach to inter-satellite time synchronization for micro-satellite cluster

Micro-satellite cluster enables a whole new class of missions for communications, remote sensing, and scientific research for both civilian and military purposes. Synchronizing the time of the satellites in a cluster is important for both cluster sensing capabilities and its autonomous operating. However, the existing time synchronization methods are not suitable for microsatellite cluster, because it requires too many human interventions and occupies too much ground control resource. Although, data post-process may realize the equivalent time synchronization, it requires processing time and powerful computing ability on the ground, which cannot be implemented by cluster itself. In order to autonomously establish and maintain the time benchmark in a cluster, we propose a compact time difference compensation system（TDCS）, which is a kind of time control loop that dynamically adjusts the satellite reference frequency according to the time difference. Consequently, the time synchronization in the cluster can be autonomously achieved on-orbit by synchronizing the clock of other satellites to a chosen one＇s. The experimental result shows that the standard deviation of time synchronization is about 102 ps when the carrier to noise ratio（CNR） is 95 d BHz, and the standard deviation of corresponding frequency difference is approximately0.36 Hz.

Precise time frequency synchronization technology for bistatic radar

A complete method of synchronization technology of bistatic radar using global position system （GPS） is presented. The pulse per second signal （1PPS） is elaborately modified to increase the time synchronization precision and keep loop locking. A very high time synchronization precision is achieved. Using the modified 1PPS to discipline the local OCXO, the reference frequency signal achieves both high long term stability （LTS） and short term stability （STS） properties. An algorithm, named phase abrupt change CFAR is presented to restrain the 1PPS phase abrupt change and keep loop locking. The experimental results indicate that this time and frequency synchronization method is effective and the time synchronization precision of the synchronization system can be improved from ±100 ns to ±25 ns. In addition, the phase noise is improved to 20 dB.

Research on Time Synchronization Method Under Arbitrary Network Delay in Wireless Sensor Networks

To cope with the arbitrariness of the network delays,a novel method,referred to as the composite particle filter approach based on variational Bayesian(VB-CPF),is proposed herein to estimate the clock skew and clock offset in wireless sensor networks.VB-CPF is an improvement of the Gaussian mixture kalman particle filter(GMKPF)algorithm.In GMKPF,Expectation-Maximization(EM)algorithm needs to determine the number of mixture components in advance,and it is easy to generate overfitting and underfitting.Variational Bayesian EM(VB-EM)algorithm is introduced in this paper to determine the number of mixture components adaptively according to the observations.Moreover,to solve the problem of data packet loss caused by unreliable links,we propose a robust time synchronization(RTS)method in this paper.RTS establishes an autoregressive model for clock skew,and calculates the clock parameters based on the established autoregressive model in case of packet loss.The final simulation results illustrate that VB-CPF yields much more accurate results relative to GMKPF when the network delays are modeled in terms of an asymmetric Gaussian distribution.Moreover,RTS shows good robustness to the continuous and random dropout of time messages.

Precise measurement method of optical fiber length based on timestamp technique

A measurement method of optical fiber length using timestamp technique is demonstrated. Based on IEEE1588 precise clock synchronization protocol, the principle that time delay asymmetry on two path results in synchronization time deviation is used, and the difference between two-path delays could be deduced by measuring the synchronization time deviation reversely. Then the length of optical fiber on one path could be calculated if that on the other path is known Due to the fact that the path of Sync and Delay_Req message is symmetric, the optical pulse dispersion and the asymmetry of photoelectric detector performance on two paths are averaged by exchanging two optical fibers. The time difference between master and slave clocks is eliminated by sharing the same time base. At last, the lengths of two single-mode optical fibers are measured with the uncertainty of 0. 578 m for 3 227. 722 m and 0. 758 m for 25 491. 522 m, respectively. Thus this method has high precision and long range.

Real-time Synchronization Method Based on Dual Ring Fieldbus in CNC System

As the popularization of dual ring fieldbus, the optimized dual ring synchronization methods are still in short. The current synchronization methods are generally established in traditional industrial fieldbus, in which transmission is commonly considered in single track, the two-way transmitting cannot take full effect, and would result in unwanted idle load on equipment lines. In stamp-transferring part, the synchronizing algorithm is not properly processed to diminish the latency, so the real-time performance of entire system cannot be ensured. To support the synchronization control of stations in the CNC system, a real-time time synchronization method for dual ring fieldbus in the CNC system is designed in this paper. In this method a synchronizing message transmission scheme based on dual ring architecture and the synchronization algorithm between master and secondary stations are integrated. In the scheme, the clock models of both master and secondary stations are optimized with corresponding modules and the stamp data transmission based on the dual ring fieldbus is devised exclusively, so the transmitting efficiency improves with less idle work. In the algorithm, all the secondary stations can accomplish the consistent state with master station by updating clock discrepancy information in one communication cycle, and it takes the advantage of two-way transmitting and makes the best use of dual ring structure, so the real-time performance of the system can be promoted while retaining the precision of synchronization. To evaluate the performance, the costs of the method and errors during synchronizing are noted and analyzed based on the actual running environment in the industrial fieldbus. The results show that it reduces communication cost and ensures the smoothness of the system with low lag effects under heavy load. The proposed time synchronization method optimizes the architecture of sync message transmission in dual ring fieldbus, and improves the efficiency of time synchronization in the stations of CNC system.

Fractionally Spaced Equalization Algorithms in 60GHz Communication System

Several fractionally spaced equalizers(FSE) which could be used in 60 GHz systems are presented in this paper. For 60 GHz systems, low-power equalization algorithms are favorable. We focus on FSE in both time domain(TD) and frequency domain(FD) in order to meet different complexity requirements of 60 GHz systems. Compared with symbol spaced equalizer(SSE), FSE can relax the requirement of sampling synchronization hardware significantly. Extensive simulation results show that our equalization algorithms not only eliminate ISI efficiently, but are also robust to timing synchronization errors.

Integrated method for measuring distance and time difference between small satellites

The advancement of small satellites is promoting the development of distributed satellite systems,and for the latter,it is essential to coordinate the spatial and temporal relations between mutually visible satellites.By now,dual one-way ranging(DOWR)and two-way time transfer(TWTT)are generally integrated in the same software and hardware system to meet the limitations of small satellites in terms of size,weight and power(SWaP)consumption.However,studies show that pseudo-noise regenerative ranging(PNRR)performs better than DOWR if some advanced implementation technologies are employed.Besides,PNRR has no requirement on time synchronization.To apply PNRR to small satellites,and meanwhile,meet the demand for time difference measurement,we propose the round-way time difference measurement,which can be combined with PNRR to form a new integrated system without exceeding the limits of SWaP.The new integrated system can provide distributed small satellite systems with on-orbit high-accuracy and high-precision distance measurement and time difference measurement in real time.Experimental results show that the precision of ranging is about 1.94 cm,and that of time difference measurement is about 78.4 ps,at the signal to noise ratio of 80 dBHz.