A fast and precise three-dimensional measurement system based on multiple parallel line lasers

This paper conducts a trade-off between efficiency and accuracy of three-dimensional(3 D)shape measurement based on the triangulation principle,and introduces a flying and precise 3 D shape measurement method based on multiple parallel line lasers.Firstly,we establish the measurement model of the multiple parallel line lasers system,and introduce the concept that multiple base planes can help to deduce the unified formula of the measurement system and are used in simplifying the process of the calibration.Then,the constraint of the line spatial frequency,which maximizes the measurement efficiency while ensuring accuracy,is determined according to the height distribution of the object.Secondly,the simulation analyzing the variation of the systemic resolution quantitatively under the circumstance of a set of specific parameters is performed,which provides a fundamental thesis for option of the four system parameters.Thirdly,for the application of the precision measurement in the industrial field,additional profiles are acquired to improve the lateral resolution by applying a motor to scan the 3 D surface.Finally,compared with the line laser,the experimental study shows that the present method of obtaining 41220 points per frame improves the measurement efficiency.Furthermore,the accuracy and the process of the calibration are advanced in comparison with the existing multiple-line laser and the structured light makes an accuracy better than 0.22 mm at a distance of 956.02 mm.

PROBABILISTIC AND AVERAGE LINEAR WIDTHS OF SOBOLEV SPACE WITH GAUSSIAN MEASURE IN SPACE S_Q(T)(1≤Q≤∞)

Probabilistic linear （N, δ）-widths and p-average linear N-widths of Sobolev space W2^r（T）, equipped with a Gaussian probability measure #, are studied in the metric of Sq （T） （1 ≤ Q ≤∞）, and determined the asymptotic equalities：λN,δ（W2^r（T）,μ,Sq（T））={（N^-1）^r＋p/2-1/q√1＋1/N·ln1/δ, 1≤q≤2, （N^-1）^r＋p/2-1/q（1＋N^-1/q√ln1/δ）,2〈q〈∞, （N^-1）^r＋p/2√lnN/δ, q=∞,and λN^（a）（W2^r（T）,μ,Sq（T））p={（N^-1）^r＋p/2-1/q, 1≤q〈∞, （N^-1）^r＋p/2-1/q√lnN, q=∞,where 0 〈 p 〈 ∞, δ∈ （0, 1/2], ρ 〉 1, and Sq（T） is a subspace of L1（T）, in which the Fourier series is absolutely convergent in lq sense.

On-line measurement of electrical variables of the transducer during ultrasonic welding and cutting

A measurement system for high power electrical variables with ultrasonic frequency was established. It can measure the effective values of the voltage and the current, the active power, the phase difference of voltage and current, the frequency of the transducer during ultrasonic welding and cutting. In sampling circuits of the system, the measured current is sensed by using a no capacitance and no inductance precision resistor and is treated with a difference amplifier, the measured voltage is processed by using a proportional amplifier. For achieving good amplitude frequency characteristics and rapid measurement of high frequency signals, the resistors, capacitors and amplifiers used in the system are rationally selected. Calibrating experiments show that relative errors are less than 1% for voltage and current effective values and less than 2.5% for active power, and absolute errors are ±1 Hz for frequency and ±1.7° for phase difference of voltage and current in the range of 17～23 kHz .

Inter-stage line ratio of He- and Li-like Ti emissions for the electron temperature measurement

Under coronal conditions, the steady state rate-equations are used to calculate the inter-stage line ratios between Li-like ls22p(2P3/2)→ls22s(2S1/2) and He-like ls2p(1P1)→1s2(1S0) transitions for Ti in the electronic temperature ranges from 0.1keV to 20 keV. The results show that the temperature sensitivities are higher at the electronic temperature less than 5000 eV and the temperature sensitivities will decrease with the increase of electronic temperature.

Measurement and Simulation of Induced Voltage and Current on 110 KV Crossing Transmission Lines under UHV AC Transmission Lines

The induced electricity of 110 kV transmission lines which cross the UHV AC transmission lines may threaten personal safety of the maintenance staff. In this paper, field measurement of the induced voltage and induced current on a 110 kV crossing line inside Jinhua in Zhejiang province is performed. The electrostatic induced voltage on the measured line is 12.24 kV. The power frequency electromagnetic field simulation model is established, and the calculation results are consistent with the measured. Influence factors analysis shows that the electrostatic induced voltage on the 110 kV line is 12.78 kV, the electromagnetic induced voltage is 12.3 V, the induced current through ground wire is less than 1A when the UHV lines operate at full load. The induced voltage and current decrease while the crossing distance increases. Parallel lines induction is much higher than crossing lines. The electromagnetic induced voltage after ground knife-switch shut down would exceed the human safety voltage 36 V while the crossing angle is less than 30?, so the temporary ground wire must be hanged to ensure safety of the maintenance staff.

Is There a Link Between Emission-Line Widths and X-Ray Continuum Slopes in Narrow Line Seyfert 1 Galaxies?

We present the discovery of 18 narrow line Seyfert 1 galaxies (NLS1). The optical spectra show the Balmer lines only slightly broader than the forbidden lines and contain strong Fe Ⅱ emission. No particularly soft X ray spectral slopes can be seen compared to a normal Seyfert 1 galaxies sample.

A METHOD OF ON-LINE MEASUREMENT FOR THE FREQUENCY RESPONSE AND IMPULSE RESPONSE FUNCTIONS OF MULTIVARIATE SYSTEM

In this paper,a method of multipoint pseudorandom combined excita-tion with the orthogonal reciprocal repeated sequences(ORRS)is presented on thebackground of the on-line identification of multivariate system.The capacity of therestraint to the identification error caused by the non-random D.C.drift of the mul-ti-input excitation with the ORRS in the multivariate system is also discussed.Thevalidity of the method described in this paper is proved by the modelling tests of themulti-plate rotor system.

CO2 Pressure Shift and Broadening of Water Lines Near 790 nm

Carbon dioxide pressure-broadened ro-vibrational transitions belonging to thev^2＋3v^3 band of H2160 have been measured with a sensitive cavity ring-down spectrometer. Water vapor of relatively low pressures （〈0.5 Torr） was used to limit the self-collisions among water molecules. After the calibration using the precise atomic transitions of Rb and a thermo- stabilized Fabry-Perot interferometer, 10^-5 cm^-1 frequency accuracy has been achieved. Line parameters are derived from least-squares fitting of the spectra using the ＂soft＂ collision model. The retrieved line parameters can be applied in the study of water absorption in the CO2-rich atmospheres of planets like Venus and Mars.

Experiments on acoustic measurement of fractured rocks and application of acoustic logging data to evaluation of fractures

Fractures in oil and gas reservoirs have been the topic of many studies and have attracted reservoir research all over the world. Because of the complexities of the fractures, it is difficult to use fractured reservoir core samples to investigate true underground conditions. Due to the diversity of the fracture parameters, the simulation and evaluation of fractured rock in the laboratory setting is also difficult. Previous researchers have typically used a single material, such as resin, to simulate fractures. There has been a great deal of simplifying of the materials and conditions, which has led to disappointing results in application. In the present study, sandstone core samples were selected and sectioned to simulate fractures, and the changes of the compressional and shear waves were measured with the gradual increasing of the fracture width. The effects of the simulated fracture width on the acoustic wave velocity and amplitude were analyzed. Two variables were defined： H represents the amplitude attenuation ratio of the compressional and shear wave, and x represents the transit time difference value of the shear wave and compressional wave divided by the transit time of the compressional wave. The effect of fracture width on these two physical quantities was then analyzed. Finally, the methods of quantitative evaluation for fracture width with H and x were obtained. The experimental results showed that the rock fractures linearly reduced the velocity of the shear and compressional waves. The effect of twin fractures on thecompressional velocity was almost equal to that of a single fracture which had the same fracture width as the sum of the twin fractures. At the same time, the existence of fractures led to acoustic wave amplitude attenuations, and the compressional wave attenuation was two times greater than that of the shear wave. In this paper, a method was proposed to calculate the fracture width with x and H, then this was applied to the array acoustic imaging logging data.The application examples showed that the calculated fracture width could be compared with fractures on the electric imaging logs. These rules were applied in the well logs to effectively evaluate the fractures, under the case of no image logs, which had significance to prospecting and development of oil and gas in fractured reservoirs.

Tracking Galloping Profile of Transmission Lines Using Wireless Inertial Measurement Units

Galloping of power transmission lines might bring about huge damage such as massive power outage and collapse of the transmission towers. To realize forecast of the galloping and provide data for study on the galloping mechanism, this paper proposes an online monitoring system for tracking galloping profile of power transmission lines based on wireless inertial measurement units (WIMUs). The system is composed of three modules: wireless inertial measurement nodes, monitoring base station, and remote monitoring station. After detailing the hardware system, the corresponding software which positions and displays galloping profile of the transmission line in real-time is outlined. The feasibility of the proposed on-line monitoring system is demonstrated through a series of experiments at the State Grid Key Laboratory of Power Overhead Transmission Line Galloping (Zhengzhou, China) by taking into account different vibration patterns.

Positional Error Model of Line Segments with Modeling and Measuring Errors Using Brownian Bridge

Spatial linear features are often represented as a series of line segments joined by measured endpoints in surveying and geographic information science.There are not only the measuring errors of the endpoints but also the modeling errors between the line segments and the actual geographical features.This paper presents a Brownian bridge error model for line segments combining both the modeling and measuring errors.First,the Brownian bridge is used to establish the position distribution of the actual geographic feature represented by the line segment.Second,an error propagation model with the constraints of the measuring error distribution of the endpoints is proposed.Third,a comprehensive error band of the line segment is constructed,wherein both the modeling and measuring errors are contained.The proposed error model can be used to evaluate line segments’overall accuracy and trustability influenced by modeling and measuring errors,and provides a comprehensive quality indicator for the geospatial data.

Variation of the Observed Widths of La I Lines with the Energy of the Upper Excited Levels, Demonstrated on Previously Unknown Energy Levels

We performed systematic laser spectroscopic investigations of La I spectral lines, using optogalvanic detection. Sixteen previously unknown even parity levels, having energies between 40,300 and 44,300 cm-1, are reported. These levels classify altogether 67 lines, not listed in spectral tables. The new levels were found due to the observation of the depopulation of the lower levels of the excited transitions. We found a remarkable variation of the observed widths of single hyperfine structure components dependent on the energy of the upper excited levels. Some levels having energies higher than 43,000 cm-1 appear to have a very high ionization probability.

Comparison experiments of neon and helium buffer gases cooling in trapped ^(199)Hg^+ ions linear trap

The influences of different buffer gas, neon and helium, on 199^Hg^＋ clock transition are compared in trapped 199^Hg^＋ linear trap. By the technique of time domain＇s Ramsey separated oscillatory fields, the buffer gas pressure frequency shifts of 199^Hg^＋ clock transition are measured to be （df/dPNe）（1/f） = 1.8 × 10^-8 Torr^-1 for neon and （df/dPHe） （1/f） = 9.1 × 10^-8 Torr^-1 for helium. Meanwhile, the line-width of 199^Hg^＋ clock transition spectrum with the buffer gas neon is narrower than that with helium at the same pressure. These experimental results show that neon is a more suitable buffer gas than helium in 199^Hg^＋ ions microwave frequency standards because of the 199^Hg^＋ clock transition is less sensitive to neon variations and the better cooling effect of neon. The optimum operating pressure for neon is found to be about 1.0 × 10^-5 Torr in our linear ion trap system.

Precise measurement of the line width of the photoassociation spectra of ultracold molecules by using a frequency shifter

We propose a technique to precisely measure the line width of the photoassociation spectra of the excited cesium molecule by using a frequency shifter to generate two laser beams with a precise frequency difference. A series of photoassociation （PA） spectra are recorded with two laser beam induced molecular lines, whose peak separation serves as an accurate frequency ruler to measure the line width of the PA spectra. The full width half maximum line width was studied as a function of PA laser intensity. The extrapolated value at zero laser intensity is （34.8± 0.22） MHz. By analyzing other broadening mechanisms, a value of （32.02 ± 0.70） MHz was deduced. It is shown that this scheme is inexpensive, simple, robust, and is promising for applications in a variety of other atomic species.

Frame Design and Reality of On-line Quality Control System for CNC Machining Center Based on Microcomputer

After giving a short review of the methods used for detecting and monitoring in general systems, this paper describes the way of communication between computer and Computer Numerical Control (CNC) Machining Center (MC). Based on these, the paper addresses the means of performing in cycle measurement for manufacturing quality, provides an approach of improving the state of manufacturing process by achieving the real time change of control parameters according to the level of manufacturing process, and discusses the technique of implementing in process dimensional errors compensation corresponding to the in cycle measurement. The results of the experiments show that the frame design is successful and the operation is reliable. The system is taking shape nowadays.

Influences of 500 kV Transmission Lines on Wetland Ecosystem and Its Protective Countermeasures--A Case Study of the Lake Wetland Natural Reserve along the Yangtze River in Anqing City

The impact of 500 kV transmission lines of Anqing power plant across the lake wetland reserve along the Yangtze River on the safety of the ecosystem was taken as the researched object.The power frequency electric field intensity(PFEFI),power frequency magnetic field intensity(PFMFI),radio interference,construction noise,vegetation destruction and the influence on water quality were investigated and monitored,and the influences of PFEFI,PFMFI,radio interference and construction noise on wild animals,especially the habitats and migration of birds were mainly researched.The direct and indirect influences on the surrounding environment as well as plants and animals in sensitive areas were analyzed and predicted.The results firstly showed there existed a 182 400m^3 stereo-space(PFEFI>4kV/m)which made flying birds unsafe under the lowest height 11 mof the lines,which fills the gap in the research of this field.Finally,some operational protection countermeasures were put forward at the current technical level to achieve the win-win goal of economic development and natural protection.

RESEARCH ON THE ON-LINE MEASURING SYSTEM FOR THE MIDDLE-CONVEX AND VARYING ELLIPSE PISTON SKIRT

The middle convex and varying ellipse piston is th e key component of an internal combustion engine In general,the piston is mac hined by non circular section CNC lathe,but the measuring of piston profile is manipulated by off line Because the off line measuring reference is differen t from the machining reference,the measurement result is diverse from the act ual dimension A new method to measure the middle convex and varying ellipse p iston profile, which is known as on line measuring, is presented By using thi s kind of method,the high measurement accuracy can be gained,as well as meeting the production requirement.

Integrated On-line Instrumentation System of Magnetic Properties Measurement

A portable microcomputer-controlled inspection system has been developed for detection of magnetic properties of soft magnetic materials. It incorporates custom designed software for control of the magnetic field during operation such as demagnetization, field sweeping, and for data logging and analysis. Results are recorded using a 12-bit analog to digital converter and are then stored on disk. The magnetic hysteresis loop and Barkhausen noise data can be converted into important magnetic parameters: coecivity, remanence, and hysteresis loss, Barkhausen amplitude, and Barkhausen noise energy. This system incorporated with the magnetostriction, and magnetoacoustic emission, is then related with the nondestructive detection of material degradation.

Transient Stability Analysis Using Transmission Line Measurement

The novel quantitative assessment method using transmission line measurement was developed. A new style of stability criterion was suggested which is based on the line measurement. The stability indices for lines, cutsets and power system according to features of transient energy in the lines were given, which not only provide a reliable and accurate assessment of the transient stability of power system, but also can be used to assess the effect of lines and cutsets on the transient stability and identify the weak transmission segment. Examples were presented by simulation on the IEEE-39 buses test system.

On the Vickers Microhardness and Wide-Angle X-Ray Line Width for Characterization of the Oxidative Stability of Poly(ethylene-co-propylene) Pipes

The purpose of the current study is to evaluate the ageing of poly(ethylene-co-propylene) fittings produced by several manufacturers. The fittings were aged for varying times as follows: 0, 2, 13, 23, 45, 106, 225 and 391 days at 100°C. In a previous paper, the oxidation induction time (OItime) and oxidation induction temperature (OItemp) were evaluated with respect to every single step of the ageing process [1]. Here, the Vickers microhardness and wide-angle X-ray line width were used for characterization of the oxidative stability of poly(ethylene-co-propylene) pipes. Both the Vickers microhardness and wide-angle X-ray line width as evaluated from a certain reflex of the diffractogram generally increase with ageing for most samples. The higher microhardness is most likely related to higher fragility of the pipes. The increase of the X-ray line width with ageing indirectly proves that reducing the crystallite size as well as increase of the crystallite defectiveness take place.