Analyses and Simulation of Fuzzy Logic Control for Suspension System of a Track Vehicle

The vibration caused by terrible road excitation affects the ride quality and safety of track vehicles. The vibration control of suspension systems is a very important factor for modern track vehicles. A fuzzy logic control for suspension system of a track vehicle is presented. A mechanical model and a system of difft, rential equations of motion taking account of the mass of loading wheel are established. Then the fuzzy logic control is applied to control the vibration of suspension system of track vehicles for sine signal and random road surfaces. Numerical simulation shows that the maximum acceleration of suspension system can be reduced to 44 % of the original value for sine signal road surface, and the mean square root of acceleration of suspension system can be reduced to 21% for random road surface. Therefore, the proposed fuzzy logic control is an efficient method for the suspension systems of track vehicles.

Shadow Extraction and Elimination of Moving Vehicles for Tracking Vehicles

Shadow extraction and elimination is essential for intelligent transportation systems(ITS)in vehicle tracking application.The shadow is the source of error for vehicle detection,which causes misclassification of vehicles and a high false alarm rate in the research of vehicle counting,vehicle detection,vehicle tracking,and classification.Most of the existing research is on shadow extraction of moving vehicles in high intensity and on standard datasets,but the process of extracting shadows from moving vehicles in low light of real scenes is difficult.The real scenes of vehicles dataset are generated by self on the Vadodara–Mumbai highway during periods of poor illumination for shadow extraction of moving vehicles to address the above problem.This paper offers a robust shadow extraction of moving vehicles and its elimination for vehicle tracking.The method is distributed into two phases:In the first phase,we extract foreground regions using a mixture of Gaussian model,and then in the second phase,with the help of the Gamma correction,intensity ratio,negative transformation,and a combination of Gaussian filters,we locate and remove the shadow region from the foreground areas.Compared to the outcomes proposed method with outcomes of an existing method,the suggested method achieves an average true negative rate of above 90%,a shadow detection rate SDR(η%),and a shadow discrimination rate SDR(ξ%)of 80%.Hence,the suggested method is more appropriate for moving shadow detection in real scenes.

Semantic Segmentation and YOLO Detector over Aerial Vehicle Images

Intelligent vehicle tracking and detection are crucial tasks in the realm of highway management.However,vehicles come in a range of sizes,which is challenging to detect,affecting the traffic monitoring system’s overall accuracy.Deep learning is considered to be an efficient method for object detection in vision-based systems.In this paper,we proposed a vision-based vehicle detection and tracking system based on a You Look Only Once version 5(YOLOv5)detector combined with a segmentation technique.The model consists of six steps.In the first step,all the extracted traffic sequence images are subjected to pre-processing to remove noise and enhance the contrast level of the images.These pre-processed images are segmented by labelling each pixel to extract the uniform regions to aid the detection phase.A single-stage detector YOLOv5 is used to detect and locate vehicles in images.Each detection was exposed to Speeded Up Robust Feature(SURF)feature extraction to track multiple vehicles.Based on this,a unique number is assigned to each vehicle to easily locate them in the succeeding image frames by extracting them using the feature-matching technique.Further,we implemented a Kalman filter to track multiple vehicles.In the end,the vehicle path is estimated by using the centroid points of the rectangular bounding box predicted by the tracking algorithm.The experimental results and comparison reveal that our proposed vehicle detection and tracking system outperformed other state-of-the-art systems.The proposed implemented system provided 94.1%detection precision for Roundabout and 96.1%detection precision for Vehicle Aerial Imaging from Drone(VAID)datasets,respectively.

NONLINEAR ESTIMATION METHODS FOR AUTONOMOUS TRACKED VEHICLE WITH SLIP

In order to achieve precise,robust autonomous guidance and control of a tracked vehicle,a kinematic model with longitudinal and lateral slip is established,Four different nonlinear filters are used to estimate both state vector and time-varying parameter vector of the created model jointly.The first filter is the well-known extended Kalman filter.The second filter is an unscented version of the Kalman filter.The third one is a particle filter using the unscented Kalman filter to generate the importance proposal distribution.The last one is a novel and guaranteed filter that uses a linear set-membership estimator and can give an ellipsoid set in which the true state lies.The four different approaches have different complexities,behavior and advantages that are surveyed and compared.

A Study on the Dynamic Analysis of A Tracked Vehicle for Ocean Mining on the Deep Seabed

A study is presented on the dynamic analysis of a tracked vehicle for mining on the deep seabed of very soft soil. Equations for the interaction between the track and extremely soft seabed are employed to develop a track/soil interaction module called TVAS. The vehicle is modeled as a multibody dynamic system by the use of a multibody dynamic analysis program. The module developed is cooperated with the multibody dynamic analysis program with a user-defined subroutine. The dynamic behavior and the conceptual design of the mining vehicle on the deep seabed are investigated.

Predicting the sinkage of a moving tracked mining vehicle using a new rheological formulation for soft deep-sea sediment

The sinkage of a moving tracked mining vehicle is greatly af fected by the combined compression-shear rheological properties of soft deep-sea sediments. For test purposes, the best sediment simulant is prepared based on soft deep-sea sediment from a C-C poly-metallic nodule mining area in the Pacific Ocean. Compressive creep tests and shear creep tests are combined to obtain compressive and shear rheological parameters to establish a combined compressive-shear rheological constitutive model and a compression-sinkage rheological constitutive model. The combined compression-shear rheological sinkage of the tracked mining vehicle at dif ferent speeds is calculated using the Recur Dyn software with a selfprogrammed subroutine to implement the combined compression-shear rheological constitutive model. The model results are compared with shear rheological sinkage and ordinary sinkage(without consideration of rheological properties). These results show that the combined compression-shear rheological constitutive model must be taken into account when calculating the sinkage of a tracked mining vehicle. The combined compression-shear rheological sinkage decrease with vehicle speed and is the largest among the three types of sinkage. The developed subroutine in the Recur Dyn software can be used to study the performance and structural optimization of moving tracked mining vehicles.

Study on Steering Control Strategy for High-Speed Tracked Vehicle with Hydrostatic Drive

Steering control strategy for high-speed tracked vehicle with hydrostatic drive is designed based on analyzing the fundamental steering theories of the hydrostatic drive tracked vehicle. The strategy is completed by the cooperation between integrated steering control unit and pump ＆ motor displacement controller. The steering simulation is conducted by using Simulink of Matlab. It is indicated that this steering control strategy can reduce the average vehicle speed automatically to achieve the driver＇s expected steering radius exactly in the case of en- suring not exceeding the system pressure threshold and no sideslip.

Chassis tra fficability simulation and experiment of a LY1352JP forest tracked vehicle

Based on the analysis of complex terrains and current forest transportation equipment,a forest tracked vehicle prototype LY1352 JP was developed.The road model and the virtual prototype of the chassis were constructed using dynamic simulation software RecurDyn.The optimal tension of the vehicle as well as its capabilities for crossing trenches,climbing vertical walls,uphill and downhill slopes were simulated.The simulation results showed that the optimum tension force of the chassis of the vehicle was 63 kN(kilonewton),accounting for 45%of the total vehicle weight.The maximum trench crossing width and vertical obstacle climbing height were 1.35 m and 0.45 m,respectively.The maximum uphill and downhill angles were 50°and 45°,respectively.Tests on the prototype capacity for crossing trenches,and uphill and downhill driving were carried out.The test results were in agreement with the simulation results.A cross-country performance of a fire truck based on the tracked vehicle chassis was conducted in an old-growth forest.Tests verified that the vehicle has a strong forest trafficability performance and can meet the needs for forest transportation.

Simulation study on starting of dual clutch transmission for tracked vehicles

In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative （ PID ） control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.

Slip-Control Strategy of Dual Independent Electric Drive Tracked Vehicle

In order to improve the brake performance of a dual independent electric drive tracked vehicle,a dynamic model for braking situation was established.Then,a sliding model controller(SMC)with an auxiliary system was designed to control the slip and its effectiveness was proved.A hardware-in-loop simulation through MATLAB/XPC was compared with the normal SMC and normal integral sliding mode controller(ISMC),the results show that SMC with the auxiliary system has a better performance:a smaller overshoot and steady state error.The disturbance is suppressed effectively.In the initial speed of 65.km/h,the brake distance was shortened by 3.4%and 6.8%compared with the other two methods,respectively.Finally,initial speeds of 30-36.km/h tests was carried out on a flat soil road.Compared with a no-control brake,the displacement was shortened by 1.8.m.It demonstrates the effectiveness of the slip-control strategy.In the same situation,the error between the simulation and test is 18.1%,which validates the accuracy of models.

Track Tension Analysis of Four-Wheel Drive Tracked Vehicles

The distribution of track tension on track link is complex when the tracked vehicles run at a high speed.A multi-drive track link structure,which changes the traditional induction wheel into the driving wheel was proposed.The mathematical model of the system was established and the distribution of track tension was studied.The combined simulation model of RecurDyn and Simulink of the structure with multi-drive track was established.The simulation results show that our proposed structure has more uniform tension distribution than traditional structures,especially under the high speed condition.The maximum tension can be reduced by 28 kN-36 kN and the transmission efficiency can be improved by10%-16% under high speed condition with this new structure.

Nonlinear Derivative and Integral Sliding Control for Tracked Vehicle Steering with Hydrostatic Drive

In the steering process of tracked vehicle with hydrostatic drive,the motion and resistance states of the vehicle are always of uncertain and nonlinear characteristics,and these states may undergoe large-scale changes.Therefore,it is significant to enhance the steering stability of tracked vehicle with hydrostatic drive to meet the need of future battlefield.In this paper,a sliding mode control algorithm is proposed and applied to achieve desired yaw rates.The speed controller and the yaw rate controller are designed through the kinematics and dynamics analysis.In addition,the nonlinear derivative and integral sliding mode control algorithm is designed,which is supposed to efficiently reduce the integration saturation and the disturbances from the unsmooth road surfaces through a conditional integrator approach.Moreover,it improves the response speed of the system and reduces the chattering by the derivative controller.The hydrostatic tracked vehicle module is modeled with a multi-body dynamic software RecurDyn and the steering control strategy module is modeled by MATLAB/Simulink.The co-simulation results of the whole model show that the control strategy can improve the vehicle steering response speed and also ensure a smooth control output with small chattering and strong robustness.

Dynamic Characteristics of Tracked Vehicle Power Train Considering Road Random Torsional Excitation

The road random torsional excitation is one type of torque rooted from the road roughness and vehicle drive system. This paper aims to study how the road random torsional excitation affects the dynamic characteristics of vehicle power train. The method of simulating the random torsional excitation of tracked vehicle is explored at first. Secondly,the road random torsional excitations under different road roughness,vehicle speeds and pre-tensions are obtained. Thirdly,the dynamic analysis model of tracked vehicle power train is constructed with the consideration of the road random torsional excitation. Eventually,the influences of this excitation on output torque,bearing support force,vibration acceleration and dynamic shear stress of transmission shafts are intensively studied.The research conclusions are helpful to correct and refine the present virtual prototype of tracked vehicle power train.

Secured Vehicle Life Cycle Tracking Using Blockchain and Smart Contract

Life Cycle Tracking(LCT)involves continuous monitoring and analy-sis of various activities associated with a vehicle.The crucial factor in the LCT is to ensure the validity of gathered data as numerous supply chain phases are involved and the data is assessed by multiple stakeholders.Frauds and swindling activities can be prevented if the history of the vehicles is made available to the interested parties.Blockchain provides a way of enforcing trustworthiness to the supply chain participants and the data associated with the various actions per-formed.Machine learning techniques when combined decentralized nature of blockchains can be used to develop a robust Vehicle LCT model.In the proposed work,Harmonic Optimized Gradient Descent andŁukasiewicz Fuzzy(HOGD-LF)Vehicle Life Cycle Tracking in Cloud Environment is proposed and it involves three stages.First,the Progressive Harmonic Optimized User Registra-tion and Authentication model is designed for computationally efficient registra-tion and authentication.Next,for the authentic user,the Gradient Descent Blockchain-based SVM Data Encryption model is designed with minimum CPU utilization.Finally,Łukasiewicz Fuzzy Smart Contract Verification is per-formed with encrypted data to ensure accurate and precise fraudulent activity deduction.The experimental analysis shows that the proposed method achieves significant performance in terms of life cycle’s prediction time,overhead,and accuracy for a different number of users.

Fuzzy Logic Control for Suspension Systems of Tracked Vehicles

A scheme of fuzzy logic control for the suspension system of a tracked vehicle is presented. A mechanical model for the whole body of a tracked vehicle, which is totally a fifteen-degree-of-freedom system, is established. The model includes the vertical motion, the pitch motion as well as the roll motion of the tracked vehicle. In contrast to most previous studies, the coupling effect among the vertical, the pitch and the roll motions of the suspension system of a tracked vehicle is considered simultaneously. The simulation of fuzzy logic control under road surface with random excitation shows that the acceleration, pitch angle and roll angle of suspension system can be efficiently controlled.

Simulation of Steering Performance for Electric Drive Tracked Vehicle

According to the analysis of the fundamental steering theories of the electric drive tracked vehicle, a new effective electric drive tracked vehicle model is built in this paper. And the simulation of the steering performance of the vehicle is made. The results show that the electric transmission has great advantage on the steering performance aspect; the small radius steering and even the pivot steering is realizable, and the agility and the rapidness is wonderful. The regenerative energy can be fully utilized by controlling.

Dynamic Motion Resistance for Tracked Vehicle

Based on previous achievements,a dynamic pressure-sinkage equation for saturated clay is established.First,aquasi-static penetration rate is selected,and the ratio of the dynamic penetration rate to the quasi-static rate is used to characterize the degree of dynamic effect,then theβth power of the ratio is used to quantify the dynamic effect of sinkage.The dynamic effect exponentβis obtained using penetration tests with different penetration rates.Then,a dynamic motion resistance equation for a tracked vehicle is established based on the dynamic pressure-sinkage equation.The equation incorporates both penetration and bulldozing resistance.Finally,a series of simulation experiments with varying travel speeds and slip rates is carried out.The results show that an increase in the speed leads to stronger terrain stiffness,resulting in a decrease in sinkage and motion resistance.However,the enhancement effect becomes weaker with an increase in the travel speed.

Control strategy for hybrid tracked vehicles using fuzzy logic

To solve the problem of power distribution for hybrid tracked vehicles （HTV）, a supervi- sory control strategy is proposed. Firstly, power system integration is analyzed and modeled. Then the control algorithm is given. Two fuzzy logics are used to realize the coordination control over each power unit. One controls power distribution based on the load power and battery state of charge （SOC）. The other manage the power during regenerating braking. To validate the presented control strategy, a ＂driver and controller＂ in the loop simulation platform is built based on dSPACE system and real-time simulation is made. The simulation results show that the strategy presented can solve the power distribution problem of hybrid tracked vehicles correctly and effectively.

Modeling and Kinematics Simulation of Hydro-mechanical Split Path Steering Device of Tracked Vehicle Based on CATIA

Based on the working principle of hydro-mechanical split path of tracked vehicle, a operating gear was developed which was controlled by steering wheel and match with transmission case. Then CATIA software was used to build the three-dimensional model and carry out dynamic simulation of the mechanism. The result indicates that the design of the mechanism fulfills the request.

Fuzzy Logic Control for Semi-Active Suspension System of Tracked Vehicle

The model of half a tracked vehicle semi-active suspension is established. The fuzzy logic controller of the semi-active suspension system is constructed. The acceleration of driver's seat and its time derivative are used as the inputs of the fuzzy logic controller, and the fuzzy logic controller output determines the semi-active suspension controllable damping force. The fuzzy logic controller is to minimize the mean square root of acceleration of the driver's seat. The control forces of controllable dampers behind the first road wheel are obtained by time delay, and the delay times are determined by the vehicle speed and axles distances. The simulation results show that this control method can decrease the acceleration of driver's seat and the suspension travel of the first road wheel, the ride quality is improved obviously.