Inadequate management of large in-train forces transferred through coupler systems of a railway train leads to running and structural failures of vehicles.Understanding these phenomena and their mitigation requires ac...Inadequate management of large in-train forces transferred through coupler systems of a railway train leads to running and structural failures of vehicles.Understanding these phenomena and their mitigation requires accurate estimation of relative motions and in-train forces between vehicle bodies.Previous numerical studies have ignored inertia of coupling elements and the impacts between couplers.Thus,existing models underestimate the additional dynamic variations in in-train forces.Detailed multi-body dynamic models of two AAR(Association of American Railroads)coupler systems used in passenger and freight trains are developed,incorporating coupler inertia and various slacks.Due to the modeling and simulation com-plexities involved in a full train model,with such details of coupler system,actual longitudinal train dynamics is not studied.A system comprising only two coupling units,inter-connecting two consecutive vehicles,is modeled.Considered system has been fixed at one end and an excitation force is applied at the other end,to mimic a relative force transmission through combined coupler system.Simulation results obtained from this representative system show that,noticeable influence in in-train forces are expected due to the combined effect of inertia of couplers and intermittent impacts between couplers in the slack regime.Maximum amplitude of longitudinal reaction force,transferred from draft gear housing to vehicle body,is expected to be significantly higher than that predicted using existing models of coupler system.It is also observed that the couplers and knuckles are subjected to significant longitudinal and lateral contact forces,due to the intermittent impacts between couplers.Thus,accurate estimation of draft gear reaction force and impact forces between couplers are essential to design vehicle and coupler components,respectively.展开更多
The present paper shows the development of a strategy for the calculation of the air brake forces of European freight trains. The model is built to upgrade the existing Politecnico di Torino longitudinal train dynamic...The present paper shows the development of a strategy for the calculation of the air brake forces of European freight trains. The model is built to upgrade the existing Politecnico di Torino longitudinal train dynamics(LTD) code LTDPoliTo, which was originally unable to account for air brake forces. The proposed model uses an empirical exponential function to calculate the air brake forces during the simulation, while the maximum normal force on the brake friction elements is calculated according to the indication of the vehicle braked weight percentage.Hence, the model does not require to simulate in detail the fluid dynamics in the brake pipe nor to precisely know the main parameters of the braking system mounted on each vehicle. The model parameters are tuned to minimize the difference between the braking distance computed by the LTDPoliTo code and the value prescribed by the UIC544-1 leaflet in emergency braking operations. Simulations are run for different configurations of freight train compositions including a variable number of Shimmns wagons trailed by an E402B locomotive at the head of the train, as suggested in a reference literature paper. The results of the proposed method are in good agreement with the target braking distances calculated according to the international rules.展开更多
During traction and braking of multiple-unit trains,substantial longitudinal dynamic forces might occur in couplers due to the non-optimal distribution of traction and braking forces generated by self-propelled carria...During traction and braking of multiple-unit trains,substantial longitudinal dynamic forces might occur in couplers due to the non-optimal distribution of traction and braking forces generated by self-propelled carriages.These dynamic forces might create shocks affecting the reduction of endurance of the weakest train structural components primarily.Thus,the overall operational safety of the train is also lowered.The purpose of the paper is to develop a new control system to supervise the activities related to the longitudinal dynamics of each train carriage in a multiple-unit train to reduce the longitudinal coupler forces acting during train traction and braking.The hierarchical structure of the control system consists of two levels.The first master level of control works like standard cruise control.However,the reduction of longitudinal coupler forces is achieved by applying a second level of slave control systems with a control configuration of feedback compensation.展开更多
文摘Inadequate management of large in-train forces transferred through coupler systems of a railway train leads to running and structural failures of vehicles.Understanding these phenomena and their mitigation requires accurate estimation of relative motions and in-train forces between vehicle bodies.Previous numerical studies have ignored inertia of coupling elements and the impacts between couplers.Thus,existing models underestimate the additional dynamic variations in in-train forces.Detailed multi-body dynamic models of two AAR(Association of American Railroads)coupler systems used in passenger and freight trains are developed,incorporating coupler inertia and various slacks.Due to the modeling and simulation com-plexities involved in a full train model,with such details of coupler system,actual longitudinal train dynamics is not studied.A system comprising only two coupling units,inter-connecting two consecutive vehicles,is modeled.Considered system has been fixed at one end and an excitation force is applied at the other end,to mimic a relative force transmission through combined coupler system.Simulation results obtained from this representative system show that,noticeable influence in in-train forces are expected due to the combined effect of inertia of couplers and intermittent impacts between couplers in the slack regime.Maximum amplitude of longitudinal reaction force,transferred from draft gear housing to vehicle body,is expected to be significantly higher than that predicted using existing models of coupler system.It is also observed that the couplers and knuckles are subjected to significant longitudinal and lateral contact forces,due to the intermittent impacts between couplers.Thus,accurate estimation of draft gear reaction force and impact forces between couplers are essential to design vehicle and coupler components,respectively.
文摘The present paper shows the development of a strategy for the calculation of the air brake forces of European freight trains. The model is built to upgrade the existing Politecnico di Torino longitudinal train dynamics(LTD) code LTDPoliTo, which was originally unable to account for air brake forces. The proposed model uses an empirical exponential function to calculate the air brake forces during the simulation, while the maximum normal force on the brake friction elements is calculated according to the indication of the vehicle braked weight percentage.Hence, the model does not require to simulate in detail the fluid dynamics in the brake pipe nor to precisely know the main parameters of the braking system mounted on each vehicle. The model parameters are tuned to minimize the difference between the braking distance computed by the LTDPoliTo code and the value prescribed by the UIC544-1 leaflet in emergency braking operations. Simulations are run for different configurations of freight train compositions including a variable number of Shimmns wagons trailed by an E402B locomotive at the head of the train, as suggested in a reference literature paper. The results of the proposed method are in good agreement with the target braking distances calculated according to the international rules.
文摘During traction and braking of multiple-unit trains,substantial longitudinal dynamic forces might occur in couplers due to the non-optimal distribution of traction and braking forces generated by self-propelled carriages.These dynamic forces might create shocks affecting the reduction of endurance of the weakest train structural components primarily.Thus,the overall operational safety of the train is also lowered.The purpose of the paper is to develop a new control system to supervise the activities related to the longitudinal dynamics of each train carriage in a multiple-unit train to reduce the longitudinal coupler forces acting during train traction and braking.The hierarchical structure of the control system consists of two levels.The first master level of control works like standard cruise control.However,the reduction of longitudinal coupler forces is achieved by applying a second level of slave control systems with a control configuration of feedback compensation.
