Valley polarization in transition metal dichalcogenide layered semiconductors:Generation,relaxation,manipulation and transport

In recent years,valleytronics researches based on 2D semiconducting transition metal dichalcogenides have attracted considerable attention.On the one hand,strong spin–orbit interaction allows the presence of spin–valley coupling in this system,which provides spin addressable valley degrees of freedom for information storage and processing.On the other hand,large exciton binding energy up to hundreds of me V enables excitons to be stable carriers of valley information.Valley polarization,marked by an imbalanced exciton population in two inequivalent valleys(+K and-K),is the core of valleytronics as it can be utilized to store binary information.Motivated by the potential applications,we present a thorough overview of the recent advancements in the generation,relaxation,manipulation,and transport of the valley polarization in nonmagnetic transition metal dichalcogenide layered semiconductors.We also discuss the development of valleytronic devices and future challenges in this field.

水下航行体湍流数值模拟方法研究进展综述

In this paper,we present an overview of numerical simulation methods for the flow around typical underwater vehicles at high Reynolds numbers,which highlights the dominant flow structures in different regions of interest.This overview covers the forebody,midbody,stern,wake region,and appendages and summarizes flow phenomena,including laminar-to-turbulent transition,turbulent boundary layers,flow under the influence of curvatures,wake interactions,and all associated complex vortex structures.Furthermore,the current issues and challenges of capturing these flow structures are addressed.This overview provides a deep insight into the use of numerical simulation methods,including the Reynolds-averaged Navier–Stokes(RANS)method,large eddy simulation(LES)method,and the hybrid RANS/LES method,and evaluates their applicability in capturing detailed flow features.

Influence of heat input on microhardness and microstructure across the welding interface between stainless steel and low alloy steel

The welding interface is crucial to the service safety of dissimilar metal weld(DMW)joints between stainless steel(SS)and low alloy(LA)steel.Different status of welding interfaces was prepared by cladding SS consumables to LA steel substrates with different heat inputs via tungsten inert gas arc welding(TIG),followed by a series of microstructural characterizations and hardness tests.Results showed that a hardening and transition layer(TL)would be generated along the welding interface,and the width and hardening degree of the TL would increase with the heat input.Meanwhile,heavy load hardness tests showed that highly severe inhomogeneous plastic deformation and the microcrack would be generated in the interfacial region and the welding interface respectively in the highest heat input sample(1.03 kJ/mm).These results indicate that the increase in heat input would deteriorate the bonding performance of DMW joints.Further microstructural observations showed that the higher hardening degree of the highest heat input sample was mainly attributed to the stronger grain boundary,solution,and dislocation strengthening effects.

不同编织方式下陶瓷基复合材料表面流动特性数值计算研究

Ceramic matrix composites(CMCs) are one of the most promising materials in the field of gas turbines,with superior weight and thermal properties. Its surface morphology is different from the traditional casting airfoil components, which mainly comes from different weaving methods and different braided tow thickness. However, few people have studied the influence of surface morphology of ceramic matrix composites(CMCs) on the development of boundary layer and the resulting flow loss. In this paper, Tex Gen is used to generate different surface morphology structures of ceramic matrix composites(CMCs), and the surface flow characteristics of corresponding CMCs plates are numerically studied. It is found that the slope of the displacement thickness of the woven surface first increases and then decreases in the whole transition interval. Thicker braided tow thickness and denser braiding method will induce earlier flow transition phenomenon and produce greater flow loss;The flow loss on the surface of CMCs plate is mainly composed of the vortex loss in the pit and the boundary layer loss outside the pit, and the boundary layer loss is dominant. The weaving methods has a greater influence on the flow state and flow loss of the boundary layer.

MICROSTRUCTURE AND PROPERTIES OF 5A03 AND SUS304 IN TRANSITIONAL BRAZING

Stainless steel is so different from aluminum alloys in physical and chemicalcharacters. When they are welded directly, there tend to be Al-Fe brittle compounds on the joint.This paper investigates the processing performance, interface microstructures and mechanicalproperties of aluminum alloys/stainless steel by way of brazing after brush plating a Ni/Cutransitional layer on stainless steel. After the joints are brazed with Al-Si-Cu-Mg-Zn foil brazingfiller metal on different brazing parameters, both the mechanical properties and the microstructuresare satisfactory for application. And the influence of the brazing parameters on bonding quality ofthe brazed joints is discussed in detail. The results reveal that no brittle Al-Fe intermetallicCompound is found in the interfaces. The Ni/Cu electroplating layer effectively hinders thediffusion of Fe atoms from SUS304 to 5A03. Though a little AlCu_3 brittle compound is produced, itsquantity is too small to affect the strength of the joint.

Preparation of layered oxide Li(Co_(1/3)Ni_(1/3)Mn_(1/3))O_2 via the sol-gel process

To obtain homogenous layered oxide Li（Co1/3Ni1/3Mn1/3）O2 as a lithium insertion positive electrode material, the sol-gel process using citric acid as a chelating agent was applied. The material Li（Co1/3Ni1/3Mn1/3）O2 was synthesized at different calcination temperatures. XRD experiment indicated that the layered Li（Co1/3Ni1/3Mn1/3）O2 material could be synthesized at a lower temperature of 800℃, and the oxidation state of Co, Ni, and Mn in the cathode confirmed by XPS were ＋3, ＋2, and ＋4, respectively. SEM observations showed that the synthesized material could form homogenous particle morphology with the particle size of about 200 nm. In spite of different calcination temperatures, the charge-discharge curves of all the samples for the initial cycle were similar, and the cathode synthesized at 900℃ showed a small irreversible capacity loss of 11.24% and a high discharge capacity of 212.2 mAh·g^-1 in the voltage range of 2.9-4.6 V.

POD analysis of the instability mode of a low-speed streak in a laminar boundary layer

The instability of one single low-speed streak in a zero-pressure-gradient laminar boundary layer is investigated experimentally via both hydrogen bubble visualization and planar particle image velocimetry(PIV) measurement. A single low-speed streak is generated and destabilized by the wake of an interference wire positioned normal to the wall and in the upstream. The downstream development of the streak includes secondary instability and self-reproduction process, which leads to the generation of two additional streaks appearing on either side of the primary one. A proper orthogonal decomposition(POD) analysis of PIV measured velocity field is used to identify the components of the streak instability in the POD mode space: for a sinuous/varicose type of POD mode, its basis functions present anti-symmetric/symmetric distributions about the streak centerline in the streamwise component, and the symmetry condition reverses in the spanwise component. It is further shown that sinuous mode dominates the turbulent kinematic energy(TKE) through the whole streak evolution process, the TKE content first increases along the streamwise direction to a saturation value and then decays slowly. In contrast, varicose mode exhibits a sustained growth of the TKE content,suggesting an increasing competition of varicose instability against sinuous instability.

Charge Density Wave States and Structural Transition in Layered Chalcogenide TaSe_(2-x)Te_x

The structural features and three-dimensional nature of the charge density wave （CDW） state of the layered chalcogenide 1T-TaSe2-xTex （0≤x≤2.0） are characterized by Cs-corrected transmission electron microscopy measurements. Notable changes of both average structure and the CDW state arising from Te substitution for Se are clearly demonstrated in samples with x〉0.3. The commensurate CDW state characterized by the known star-of-David clustering in the 1T-TaSe2 crystal becomes visibly unstable with Te substitution and vanishes when x=0.3. The 1T-TaSe2-xTex （0.3≤x≤1.3） samples generally adopt a remarkable incommensurate CDW state with monoclinic distortion, which could be fundamentally in correlation with the strong qq-dependent electron-phonon coupling-induced period-lattice-distortion as identified in TaTe22. Systematic analysis demonstrates that the occurrence of superconductivity is related to the suppression of the commensurate CDW phase and the presence of discommensuration is an evident structural feature observed in the superconducting samples.

Supersonic boundary layer transition induced by self-sustaining dual jets

To promote high-speed boundary layer transition,this paper proposes an active self-sustaining dual jets(SDJ)actuator utilizing the energy of supersonic mainflow.Employing the nanoparticle-based planar laser scattering(NPLS),supersonic flat-plate boundary layer transition induced by SDJ is experimentally investigated in an Ma-2.95 low-turbulence wind tunnel.Streamwise and spanwise NPLS images are obtained to analyze fine flow structures of the whole transition process.The results reveal the transition control mechanisms that on the one hand,the jet-induced shear layer produces unstable Kelvin–Helmholtz instabilities in the wake flow,on the other hand,the jets also generates an adverse pressure gradient in the boundary layer and induce unstable streak structures,which gradually break down into turbulence downstream.The paper provides a new method for transition control of high-speed boundary layer,and have prospect both in theory and engineering application.

Basic Properties of Pyrolysis Carbon Black of Waste Tyres and Application of Pyrolysis Carbon Black in Transition Layer Rubber of All Steel Radial Tire

The main chemical composition of pyrolysis carbon black of waste tires is C,O,Cu,Zn and so on.The content of ash and fine powder in pyrolysis carbon black is high,and the 300%elongation stress is high.The difference between pyrolysis carbon black and furnace black N326,which is commonly used in rubber,is obvious compared with chemical property.The pyrolysis carbon black was used to replace furnace black N326 in the transition layer of all steel load Radial tire rubber through experimental study.It was found that the compression heat generation and dynamic loss(Tanδ)of the blend rubber before and after aging were obviously reduced,the elongation at break and resilience increased,while the tensile stress and tear strength decreased by 100%and 300%,but the hardness and tensile strength changed little before and after aging.According to the latest raw material price calculation,15 used tire pyrolysis carbon black instead of furnace carbon black N326 used in all steel Radial tire transition layer rubber application,excluding labor costs,electricity and equipment depreciation,a ton of blended rubber saves about$22.86 in production costs.

Dynamics of low-speed streak evolution and interaction in laminar boundary layer

The present paper presents an experimental effort on the regeneration process of two low-speed laminar streaks in a zero-pressure-gradient laminar boundary layer. Two vertical thin wires separated by a spanwise distance of 30 mm are used to introduce disturbances of two rolls of transitional Karmain vortex street to the downstream boundary layer. Both hydrogen bubble visualization and particle image velocimetry （PIV） measurement show that two lowspeed streaks are induced through leading-edge receptivity process. As these streaks develop in the downstream, two additional low-speed streaks begin to appear outboard of the flank of the original two, together with complex dynamics of streak splitting and merging. A flow pattern of four streaks aligned along the spanwise direction occurs finally in the far downstream. It is found that besides the mechanisms of streak breakdown, the streak interaction is also an important factor characterizing the instability of low speed streaks and their regeneration process.

THE NUMBERS OF JUMP LAYERS OF BOUNDARY VALUE PROBLEMS IN QUASILINEAR DIFFERENTIAL EQUATIONS

This paper discusses the numbers of jump layers of boundary value problems in quasilinear differential equations. In addition, the paper gives several examples to explain why the original equation must be rediscussed when the determinate function in reference [1 ] is a/ways equal to zero.

The hysteresis loops of a ferroelectric bilayer film with surface transition layers

Based on the transverse Ising model in the framework of the mean field approximation, this paper discusses a ferroelectric bilayer film with the surface transition layers within each constituent slab and an antiferroelectric interracial coupling between two slabs. The hysteresis loop of a bilayer film is investigated. The results show that the surface transition layer in a ferroelectric bilayer film plays a significant role in realizing the multiple-state memory.

Protonated and layered transition metal oxides as solid acids for dehydration of biomass-based fructose into 5-hydroxymethylfurfural

A serial of protonated and layered transition metal oxides, including layered HTaWO6, HNbMoO6 as well as HNbWO6, were synthesized by solid-state reaction and ion-exchange. The layered HTaWO6 has been systematically studied as a solid acid to realize the dehydration of fructose to 5-hydroxymethylfurfural (HMF). The transition metal oxide samples were characterized with ICP-OES, EDS, XRD, XPS, SEM, TGA, FT-IR, N-2 adsorption-desorption and NH3-TPD. The influential factors such as reaction temperature, reaction time, solvent, catalyst amount and substrate concentration were deeply investigated. The optimized fructose conversion rate of 99% with HMF yield of 67% were achieved after 30 min at 140 degrees C in dimethylsulfoxide. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Experimental study on surface arc plasma actuation-based hypersonic boundary layer transition flow control

Effective control of hypersonic transition is essential.In order to avoid affecting the structural proflle of the aircraft,as well as reducing power consumption and electromagnetic interference,a low-frequency surface arc plasma disturbance experiment to promote hypersonic transition was carried out in theΦ0.25 m double-throat Ludwieg tube wind tunnel at Huazhong University of Science and Technology.Contacting printed circuit board sensors and non-contact focused laser differential interferometry testing technology were used in combination.Experimental results showed that the low-frequency surface arc plasma actuation had obvious stimulation effects on the second-mode unstable wave and could promote boundary layer transition by changing the spectral characteristics of the second-mode unstable wave.At the same time,the plasma actuation could promote energy exchange between the second-mode unstable wave and other unstable waves.Finally,the corresponding control mechanism is discussed.

INFRARED SPECTROSCOPIC STUDY OF STRUCTURE TRANSITION IN THE PEROVSKITE-TYPE LAYER COMPOUND: (n-C_9H_(19_NH_3)_2CuCl_4

Infrared spectra of (n-C_9H_(19)NH_3)_2CuCl_4 in three solid phases were investigated. It was found that the phase transition at T_(cl)(25℃) arises from the change of the interaction and packing structure of the chain. The phase transition at T_(c2)(34℃)is related to the change of a partial conformational order-disorder. The GTC or GTG' and small concentration of TG structure near CH_3 group exist in phase Ⅲ (above 38℃).

A STUDY OF STRUCTURE TRANSITION OF CHLORIDE LAYER ADSORBED ON Ag(100) ELECTRODES

The behavior of chloride adsorbed on Ag(100) electrode has been studied using chronoamperometric technique, and the structural transition of chloride layer has been confirmed.

The effect of G?rtler instability on hypersonic boundary layer transition

The evolution of Gortler vortices and its interaction with other instabilities are investigated in this paper. Both the Mack mode and the Gortler mode exist in hypersonic boundary-layer flows over concave surfaces, and their interactions are crucially important in boundary layer transition. We carry out a direct numerical simulation to explore the interaction between the GOrtler and the oblique Mack mode. The results indicate that the interaction between the forced Gortler mode and the oblique Mack mode promotes the onset of the transition. The forced oblique Mack mode is susceptible to nonlinear interaction. Because of the development of the GOrtler mode, the forced Mack mode and other harmonic modes are excited.

Selection and Impact of an Aerofoil Leading Edge on Boundary Layer Transition

The choice of leading-edge aspect ratio (AR) plays a crucial role when planning boundary layer wind tunnel tests on a flat plate. Poor selection of the leading-edge profile hampers effectiveness of the experiment and increases testing costs associated with interchanging of leading edges to attain accurate results. Thus, the appropriate selection of the leading edge is a very crucial part of the wind tunnel experiment process. It is argued that the curvature of the leading edge and thus the AR is of paramount importance to achieve accurate results from the wind tunnel testing. In this project, seven different elliptical leading edges were tested, and their performance was compared with an ideal leading edge with zero thickness. Experiments and computation have been done for leading edges ranging from AR6 to AR20. Results were evaluated for boundary layer transition onset location, and it was found that AR20 has the least influence on the flow structure when compared to the ideal leading edge. A study of the flow structure at the stagnation point indicates an increase in adverse pressure gradient with an increase in the AR but also shows a decrease in the size of the stagnation region. The presence of a higher AR leading edge reduces the turbulent spot production rate, which is one of the primary causes of boundary layer transition. This paper presents a correlation that enables aerodynamicists to quantify the impact of the leading-edge AR on transition. A typical case is also presented to compare the relative performance of a wedge and the higher AR leading edge, which provides a choice between an elliptical or a wedge-shaped leading edge.

Liquid–liquid phase transition in confined liquid titanium

We report the layering and liquid–liquid phase transition of liquid titanium confined between two parallel panel walls.Abnormal changes in the volume and the potential energy confirm the existence of the liquid–liquid phase transition of the liquid titanium. The typical feature of the liquid–liquid phase transition is layering, which is induced by the slit size,pressure and temperature. We highlight the fact that the slit size and pressure will determine the number of layers. In addition, with the change in the slit size, the density of the confined liquid expresses a fluctuating law. The phase diagram of the layering transition is drawn to clearly understand the layering. This study provides insights into the liquid–liquid phase transition of liquid metal in a confined space.