Transmission Line Modelling of Geomagnetic Induction in the Ocean/Earth Conductivity Structure

During geomagnetic disturbances, electric fields induced in the Earth and in power systems, pipelines and submarine cables can interfere with the operation of these systems. Calculations for submarine cables are complicated by the need to consider not just the induction directly into the cable but also the earth potentials produced at the coast at each end of the cable. To determine the coast potentials, we present a new model of the ocean and earth conductivity structure that spans the whole length of a cable from one coast to another. Calculations are based on the generalised thin sheet approach introduced by Ranganayaki and Madden but converted to a transmission line model that can be solved using standard circuit theory techniques. It is shown how the transmission line model can be used to calculate the earth potential profile from one side of an ocean or sea to the other. Example calculations are presented for a shallow sea, a shallow ocean, and a deep ocean that are simplified approximations to the North Sea, Tasman Sea and Pacific Ocean and show that the peak potentials occur at the coast. An examination is also made of how the width of a shallow sea and the width of the continental shelf affect these coast potentials. The modelling technique and example results provide a guide for more detailed modelling of geomagnetic induction along the routes of specific submarine cables.

An optimized transmission line model of grounding electrodes under lightning currents

In this paper, an optimized transmission line model （OTL） for modeling transient behavior of grounding electrodes under lightning currents is presented. The soil ionization effect is considered in OTL, and all electromagnetic couplings between dif- ferent parts of grounding electrode are also considered by selecting the size of segment conductor properly and calculating the mutual coupling parameters between segment conductors accurately. Comparing with the traditional transmission line model, the optimized model can be used to accurately predict the effective length and transient potential rise （TPR） of grounding elec- trodes. Transient behaviors of grounding electrodes are simulated by OTL and the results are in good agreement with those of the electromagnetic model proposed by Grcev, and experiment results performed by Electricit6 de France and Geri. Further- more, non-uniform discharging phenomenon of grounding electrode under lightning current is discussed, and the effective lengths of horizontal grounding electrode under lightning currents are presented.

Transmission line model of carbon nanotubes:through the Boltzmann transport equation

A transmission line（TL）model of a carbon nanotube（CNT）is analyzed through the Boltzmann transport equation（BTE）.With the help of a numerical solution of the BTE,we study the kinetic inductance（L_K）, quantum capacitance（C_Q）and resistivity（R_S）of a CNT under a high frequency electric field.Values of L_K and C_Q obtained from BTE accord with the theoretical values,and the TL model is verified by transport theory for the first time.Moreover,our results show that the AC resistivity of CNTs deviates from DC,increasing along with shorter electric field wave length.This shows that changes in R_S in the high frequency condition must be considered in the TL model.

Transmission Capacity Analysis for Linear VANET under Physical Model

In this study, the transmission capacity of VANETs in a highway scenario is analysed on the basis of a 1D line model and the carrier sense multiple access with collision avoidance(CSMA/CA) protocol. We describe the CSMA/CA protocol used in IEEE802.11 p from the perspective of the geometric relationship amongst simultaneous transmitters. The desired channel and interfering channels are assumed to experience the same amount of path-loss and Rayleigh fading. On the basis of the proposed model, we analyse the attempted transmission probability of each road segment and the maximum intensity of active transmitters, including their theoretical values. Then, we employ the physical model to obtain the outage probability and derive the upper bound of the transmission capacity of a VANET, which is defined as the average spatial density of successful transmissions in the network. Simulation results indicate that the theoretical value offers a good bound on network capacity.

Assessing high-energy x-ray and proton irradiation effects on electrical properties of P-GaN and N-GaN thin films

The effects of ionizing and displacement irradiation of high-energy x-ray and 2-MeV proton on GaN thin films were investigated and compared in this study.The electrical properties of both P-GaN and N-GaN,separated from power devices,were gauged for fundamental analysis.It was found that the electrical properties of P-GaN were improved as a consequence of the disruption of the Mg-H bond induced by high-dose x-ray irradiation,as indicated by the Hall and circular transmission line model.Specifically,under a 100-Mrad(Si)x-ray dose,the specific contact resistance pc of P-GaN decreased by 30%,and the hole carrier concentration increased significantly.Additionally,the atom displacement damage effect of a 2-MeV proton of 1×10^(13)p/cm^(2)led to a significant degradation of the electrical properties of P-GaN,while those of N-GaN remained unchanged.P-GaN was found to be more sensitive to irradiation than N-GaN thin film.The effectiveness of x-ray irradiation in enhancing the electrical properties of P-GaN thin films was demonstrated in this study.

Advanced high-pressure plasma diagnostics with hairpin resonator probe surrounded by film and sheath

The hairpin probe using microwave resonance in plasma is applicable to high pressure 1.33 ×10^3-1.01×10^5 Pa）） as developed recently. In this work, an analytic model of the hairpin resonator probe surrounded by a thin dielectric layer and a sheath layer is proposed. The correction factor due to these surroundings is analytically found and confirmed by electromagnetic field finite difference time domain simulation, thus enabling the accurate measurement of electron density in a high-pressure non-equilibrium uniform discharge.

Analysis of the harmful effects to buried oil pipeline from power line short-circuit fault

Based on the transmission line theory of the buried metallic structures, the concerned harmful effects to the buried oil and natural gas pipelines caused by the power line short-circuit fault are further discussed. A closed-form expression of the induced voltage caused by the short-circuit fault of the ultra-high voltage power （UHVAC） transmission line is given. The transmission line model of the buried pipeline is set up and a set of formulas for calculating induced voltage on the pipeline and the parameters of the buried pipeline in actual environment condition are given. At last, the characteristic of the harm^hl effects on the buried pipeline from the power line short-circuit fault are discussed.

A Similarity Comparison Based Pilot Protection Scheme for VSC-HVDC Grids Considering Fault Current Limiting Strategy

In the voltage source converter based high-voltage direct current(VSC-HVDC)grids,fast and reliable protections are the key technologies.The traditional protection schemes are easily affected by fault resistance,line distributed capacitance,etc.Meanwhile,the influence of fault current limiting strategy(FCLS)has not been fully considered.In this paper,the fault characteristics under FCLS and the feasibility of traditional travelling wave protections are analyzed.To improve the reliability and sensibility,a similarity comparison based pilot protection scheme is proposed,which focuses on the relationship between the fault characteristics and the state of the protected transmission line,with the establishment of a precise frequencydependent transmission line model.The criteria based on the similarity comparison calculated by cross-wavelet can identify the fault effectively.Meanwhile,the protection scheme can also endure the influence of error synchronization.Finally,the protection performance is verified in the PSCAD/EMTDC under different fault conditions.

Impact of Motor Stator Winding Faults on Motor Differential-mode Impedance and Mode Transformation

Motor impedance and mode transformation have significant effects on the electromagnetic interference(EMI)generated in motor drive systems.Stator winding faults commonly cause motor failure;however,in their early stages,they may not affect the short-term operation of the motor.To date,EMI noise under the influence of premature stator winding faults has not been adequately studied,particularly the differential-mode(DM)noise due to the common-mode(CM)-to-DM transformation.This study investigates and quantifies the influence of stator winding faults on the motor DM impedance and mode transformation.First,the transmission line model of an induction motor is described based on the scattering(S)parameter measurements of each phase of the motor.It offers the flexibility to emulate different types of stator winding faults at specific locations and various severities,such that the impacts of the faults on the motor DM impedance can be easily estimated.Second,a test setup is proposed to quantify the CM-to-DM transformation due to the stator winding faults.The findings of this study reveal that even the early stages of stator winding faults can result in significant changes in the DM noise.

Optimization of ohmic contact for InP-based transferred electronic devices

The effect of the annealing time and annealing temperature on Ni/Ge/Au electrode contacts deposited on the n-type InP contact layer has been studied using a circular transmission line model. The minimum specific contact resistance of 3.210 7 cm2was achieved on the low-doped n-type InP contact layer with a 40 s anneal at 425 ℃. In order to improve the ohmic contact and reduce the difficulty in the fabrication of the high doped InP epi-layer, the doping concentration in the InP contact layer was chosen to be 51018cm 3in the fabrication of transferred electronic devices. Excellent differential negative resistance properties were obtained by an electron beam evaporating the Ni/Ge/Au/Ge/Ni/Au composite electrode on an InP epi-layer with a 60 s anneal at 380 ℃.