Reliable Data Collection Model and Transmission Framework in Large-Scale Wireless Medical Sensor Networks

Large-scale wireless sensor networks(WSNs)play a critical role in monitoring dangerous scenarios and responding to medical emergencies.However,the inherent instability and error-prone nature of wireless links present significant challenges,necessitating efficient data collection and reliable transmission services.This paper addresses the limitations of existing data transmission and recovery protocols by proposing a systematic end-to-end design tailored for medical event-driven cluster-based large-scale WSNs.The primary goal is to enhance the reliability of data collection and transmission services,ensuring a comprehensive and practical approach.Our approach focuses on refining the hop-count-based routing scheme to achieve fairness in forwarding reliability.Additionally,it emphasizes reliable data collection within clusters and establishes robust data transmission over multiple hops.These systematic improvements are designed to optimize the overall performance of the WSN in real-world scenarios.Simulation results of the proposed protocol validate its exceptional performance compared to other prominent data transmission schemes.The evaluation spans varying sensor densities,wireless channel conditions,and packet transmission rates,showcasing the protocol’s superiority in ensuring reliable and efficient data transfer.Our systematic end-to-end design successfully addresses the challenges posed by the instability of wireless links in large-scaleWSNs.By prioritizing fairness,reliability,and efficiency,the proposed protocol demonstrates its efficacy in enhancing data collection and transmission services,thereby offering a valuable contribution to the field of medical event-drivenWSNs.

Enabling Efficient Data Transmission in Wireless Sensor Networks-Based IoT Application

The use of the Internet of Things(IoT)is expanding at an unprecedented scale in many critical applications due to the ability to interconnect and utilize a plethora of wide range of devices.In critical infrastructure domains like oil and gas supply,intelligent transportation,power grids,and autonomous agriculture,it is essential to guarantee the confidentiality,integrity,and authenticity of data collected and exchanged.However,the limited resources coupled with the heterogeneity of IoT devices make it inefficient or sometimes infeasible to achieve secure data transmission using traditional cryptographic techniques.Consequently,designing a lightweight secure data transmission scheme is becoming essential.In this article,we propose lightweight secure data transmission(LSDT)scheme for IoT environments.LSDT consists of three phases and utilizes an effective combination of symmetric keys and the Elliptic Curve Menezes-Qu-Vanstone asymmetric key agreement protocol.We design the simulation environment and experiments to evaluate the performance of the LSDT scheme in terms of communication and computation costs.Security and performance analysis indicates that the LSDT scheme is secure,suitable for IoT applications,and performs better in comparison to other related security schemes.

Development and prospect of downhole monitoring and data transmission technology for separated zone water injection

This article outlines the development of downhole monitoring and data transmission technology for separated zone water injection in China.According to the development stages,the principles,operation processes,adaptability and application status of traditional downhole data acquisition method,cable communications and testing technology,cable-controlled downhole parameter real-time monitoring communication method and downhole wireless communication technology are introduced in detail.Problems and challenges of existing technologies in downhole monitoring and data transmission technology are pointed out.According to the production requirement,the future development direction of the downhole monitoring and data transmission technology for separated zone water injection is proposed.For the large number of wells adopting cable measuring and adjustment technology,the key is to realize the digitalization of downhole plug.For the key monitoring wells,cable-controlled communication technology needs to be improved,and downhole monitoring and data transmission technology based on composite coiled tubing needs to be developed to make the operation more convenient and reliable.For large-scale application in oil fields,downhole wireless communication technology should be developed to realize automation of measurement and adjustment.In line with ground mobile communication network,a digital communication network covering the control center,water distribution station and oil reservoir should be built quickly to provide technical support for the digitization of reservoir development.

Secure and Efficient Data Transmission Scheme Based on Physical Mechanism

Many Internet of things application scenarios have the characteristics of limited hardware resources and limited energy supply,which are not suitable for traditional security technology.The security technology based on the physicalmechanism has attracted extensive attention.How to improve the key generation rate has always been one of the urgent problems to be solved in the security technology based on the physical mechanism.In this paper,superlattice technology is introduced to the security field of Internet of things,and a high-speed symmetric key generation scheme based on superlattice for Internet of things is proposed.In order to ensure the efficiency and privacy of data transmission,we also combine the superlattice symmetric key and compressive sensing technology to build a lightweight data transmission scheme that supports data compression and data encryption at the same time.Theoretical analysis and experimental evaluation results show that the proposed scheme is superior to the most closely related work.

Autonomous UAV 3D trajectory optimization and transmission scheduling for sensor data collection on uneven terrains

This paper considers a time-constrained data collection problem from a network of ground sensors located on uneven terrain by an Unmanned Aerial Vehicle(UAV),a typical Unmanned Aerial System(UAS).The ground sensors harvest renewable energy and are equipped with batteries and data buffers.The ground sensor model takes into account sensor data buffer and battery limitations.An asymptotically globally optimal method of joint UAV 3D trajectory optimization and data transmission schedule is developed.The developed method maximizes the amount of data transmitted to the UAV without losses and too long delays and minimizes the propulsion energy of the UAV.The developed algorithm of optimal trajectory optimization and transmission scheduling is based on dynamic programming.Computer simulations demonstrate the effectiveness of the proposed algorithm.

Data Aggregation-based Transmission Method in Ultra-Dense Wireless Networks

As the Internet of Things(IoT)advances,machine-type devices are densely deployed and massive networks such as ultra-dense networks(UDNs)are formed.Various devices attend to the network to transmit data using machine-type communication(MTC),whereby numerous,various are generated.MTC devices generally have resource constraints and use wireless communication.In this kind of network,data aggregation is a key function to provide transmission efficiency.It can reduce the number of transmitted data in the network,and this leads to energy saving and reducing transmission delays.In order to effectively operate data aggregation in UDNs,it is important to select an aggregation point well.The total number of transmitted data may vary,depending on the aggregation point to which the data are delivered.Therefore,in this paper,we propose a novel data aggregation scheme to select the appropriate aggregation point and describe the data transmission method applying the proposed aggregation scheme.In addition,we evaluate the proposed scheme with extensive computer simulations.Better performances in the proposed scheme are achieved compared to the conventional approach.

Data secure transmission intelligent prediction algorithm for mobile industrial IoT networks

Mobile Industrial Internet of Things(IIoT)applications have achieved the explosive growth in recent years.The mobile IIoT has flourished and become the backbone of the industry,laying a solid foundation for the interconnection of all things.The variety of application scenarios has brought serious challenges to mobile IIoT networks,which face complex and changeable communication environments.Ensuring data secure transmission is critical for mobile IIoT networks.This paper investigates the data secure transmission performance prediction of mobile IIoT networks.To cut down computational complexity,we propose a data secure transmission scheme employing Transmit Antenna Selection(TAS).The novel secrecy performance expressions are first derived.Then,to realize real-time secrecy analysis,we design an improved Convolutional Neural Network(CNN)model,and propose an intelligent data secure transmission performance prediction algorithm.For mobile signals,the important features may be removed by the pooling layers.This will lead to negative effects on the secrecy performance prediction.A novel nine-layer improved CNN model is designed.Out of the input and output layers,it removes the pooling layer and contains six convolution layers.Elman,Back-Propagation(BP)and LeNet methods are employed to compare with the proposed algorithm.Through simulation analysis,good prediction accuracy is achieved by the CNN algorithm.The prediction accuracy obtains a 59%increase.

A Novel Secure Data Transmission Scheme in Industrial Internet of Things

The industrial Internet of Things(IoT)is a trend of factory development and a basic condition of intelligent factory.It is very important to ensure the security of data transmission in industrial IoT.Applying a new chaotic secure communication scheme to address the security problem of data transmission is the main contribution of this paper.The scheme is proposed and studied based on the synchronization of different-structure fractional-order chaotic systems with different order.The Lyapunov stability theory is used to prove the synchronization between the fractional-order drive system and the response system.The encryption and decryption process of the main data signals is implemented by using the n-shift encryption principle.We calculate and analyze the key space of the scheme.Numerical simulations are introduced to show the effectiveness of theoretical approach we proposed.

Blockchain-based data transmission control for Tactical Data Link

Tactical Data Link(TDL)is a communication system that utilizes a particular message format and a protocol to transmit data via wireless channels in an instant,automatic,and secure way.So far,TDL has shown its excellence in military applications.Current TDL adopts a distributed architecture to enhance anti-destruction capacity.However,It still faces a problem of data inconsistency and thus cannot well support cooperation across multiple militarily domains.To tackle this problem,we propose to leverage blockchain to build an automatic and adaptive data transmission control scheme for TDL.It achieves automatic data transmission and realizes information consistency among different TDL entities.Besides,applying smart contracts based on blockchain further enables adjusting data transmission policies automatically.Security analysis and experimental results based on simulations illustrate the effectiveness and efficiency of our proposed scheme.

Fast Web - Based Data Transmission

Since web based GIS processes large size spatial geographic information on internet, we should try to improve the efficiency of spatial data query processing and transmission. This paper presents two efficient methods for this purpose: division transmission and progressive transmission methods. In division transmission method, a map can be divided into several parts, called “tiles”, and only tiles can be transmitted at the request of a client. In progressive transmission method, a map can be split into several phase views based on the significance of vertices, and a server produces a target object and then transmits it progressively when this spatial object is requested from a client. In order to achieve these methods, the algorithms, “tile division”, “priority order estimation” and the strategies for data transmission are proposed in this paper, respectively. Compared with such traditional methods as “map total transmission” and “layer transmission”, the web based GIS data transmission, proposed in this paper, is advantageous in the increase of the data transmission efficiency by a great margin.

A new method for improving the inductively coupled data transmission rate of mooring buoy based on carrier signal frequency selection

In the inductively coupled data transmission system of the mooring buoy, the carrier signal frequency of the transmission channel is limited due to the inherent characteristics of the system, resulting in limited channel bandwidth. The limited channel bandwidth limits the increase in inductively coupled data transmission rate.In order to improve the inductively coupled data transmission rate of mooring buoy as much as possible without damaging the data transmission performance, a new method was proposed in this paper. The method is proposed to improve the data transmission rate by selecting the appropriate carrier signal frequencies based on the principle of maximizing the amplitude value of amplitude-frequency characteristic curve of the system. Research has been done according to this method as follows. Firstly, according to the inductively coupled transmission mooring buoy structure, the inductively coupled data transmission circuit model was established. The binary frequency shift keying(2FSK) digital signal modulation mode was selected. Through theoretical analysis, the relation between the carrier signal frequency and the data transmission performance, the relation between the carrier signal frequency and the 2FSK signal bandwidth were obtained. Secondly, the performance and the bandwidth of the signal transmission were studied for the inherent characteristics of the actual inductively coupled data transmission system. The amplitude-frequency characteristic of the system was analyzed by experiments. By selecting the appropriate carrier signal frequency parameters, an excellent data transmission performance was guaranteed and a large 2FSK signal bandwidth was obtained. Finally, an inductively coupled data transmission rate optimization experiment and a bit error rate analysis experiment were designed and carried out. The results show that the high-speed and reliable data transmission of the system was realized and the rate can reach 100 kbps.

Simulation analysis of a method to improve data-transmission performance of Nanshan 26 m Radio Telescope based on Software-Defined Networks

Data Center of Xinjiang Astronomical Observatory(XAO-DC)commenced operating in 2015,and provides services including archiving,releasing and retrieving precious astronomical data collected by the Nanshan 26 m Radio Telescope(NSRT)over the years,and realises the open sharing of astronomical observation data.The observation data from NSRT are transmitted to XAO-DC 100 km away through dedicated fiber for long-term storage.With the continuous increase of data,the static architecture of the current network cannot meet NSRT data-transmission requirements due to limited network bandwidth.To get high-speed data-transmission using the existing static network architecture,a method for reconstruction data-transmission network using Software-Defined Networks(SDN)is proposed.Benefit from the SDN’s data and control plane separation,and open programmable,combined with the Mininet simulation platform for experiments,the TCP throughput(of single thread)was improved by~24.7%,the TCP throughput(of multi threads)was improved by~9.8%,~40.9%,~35.5%and~11.7%.Compared with the current network architecture,the Latency was reduced by~63.2%.

Distributed Asynchronous Learning for Multipath Data Transmission Based on P-DDQN

Adaptive packet scheduling can efficiently enhance the performance of multipath Data Transmission.However,realizing precise packet scheduling is challenging due to the nature of high dynamics and unpredictability of network link states.To this end,this paper proposes a distributed asynchronous deep reinforcement learning framework to intensify the dynamics and prediction of adaptive packet scheduling.Our framework contains two parts:local asynchronous packet scheduling and distributed cooperative control center.In local asynchronous packet scheduling,an asynchronous prioritized replay double deep Q-learning packets scheduling algorithm is proposed for dynamic adaptive packet scheduling learning,which makes a combination of prioritized replay double deep Q-learning network(P-DDQN)to make the fitting analysis.In distributed cooperative control center,a distributed scheduling learning and neural fitting acceleration algorithm to adaptively update neural network parameters of P-DDQN for more precise packet scheduling.Experimental results show that our solution has a better performance than Random weight algorithm and Round-Robin algorithm in throughput and loss ratio.Further,our solution has 1.32 times and 1.54 times better than Random weight algorithm and Round-Robin algorithm on the stability of multipath data transmission,respectively.

Real-time performance of periodic data transmission in EPA industrial Ethernet

To evaluate and improve the real-time performance of Ethernet for plant automation（EPA） industrial Ethernet,the real-time performance of EPA periodic data transmission was theoretically and experimentally studied.By analyzing information transmission regularity and EPA deterministic scheduling mechanism,periodic messages were categorized as different modes according to their entering-queue time.The scheduling characteristics and delivery time of each mode and their interacting relations were studied,during which the models of real-time performance of periodic information transmission in EPA system were established.On this basis,an experimental platform is developed to test the delivery time of periodic messages transmission in EPA system.According to the analysis and the experiment,the main factors that limit the real-time performance of EPA periodic data transmission and the improvement methods were proposed.

Data Concurrent Transmission MAC Protocol for Application Oriented Underwater Acoustic Sensor Networks

With the increasing demand for marine exploration, underwater acoustic sensor networks (UASNs) are prone to have the characteristics of large-scale, long term monitoring, and high data traffic load. Underwater media access control (MAC) protocols, which allow multiple users to share the common medium fairly and efficiently, are essential for the performance of UASNs. However, the design of MAC protocols is confronted with the challenges of spatial unfairness, data eruption, and low energy efficiency. In this paper, we propose a novel data concurrent transmission (DCT) MAC protocol, which is able to exploit long propagation delay and conduct concurrent transmission. Specifically, we present the theoretical performance analysis of the proposed MAC protocol in detail and give an analytical solution of the success concurrent transmission probability between nodes. In addition, simulation results are provided to demonstrate that our proposed protocol is appropriate for UASNs and can significantly improve the performance in terms of network throughput and energy consumption. Finally, we give some typical future applications of UASNs and discuss the demands on MAC protocol design.

Reliability Strategies for Data Transmission in Wireless Mesh Network

Wireless Mesh Network (WMN) is a new-type wireless network. Its core idea is that any of its wireless equipment can act as both an Access Point (AP) and a router. Each node in the network can send and receive signals as well as directly communicate with one or several peer nodes. One important issue to be considered in wireless Mesh networks is how to secure reliable data transmission in multi-hop links. To solve the problem, the 3GPP system architecture proposes two functionalities: ARQ and HARQ. This paper presents two HARQ schemes, namely hop-by-hop and edge-to-edge, and three ARQ schemes: hop-by-hop, edge-to-edge, and last-hop. Moreover, it proposes three solutions for WMNs from the perspective of protocol stock design: layered cooperative mechanism, relay ARQ mechanism and multi-hop mechanism.

A Data Transmission Method Using a Cyclic Redundancy Check and Inaudible Frequencies

This paper describes a data transmission method using a cyclic redundancy check and inaudible frequencies.The proposed method uses inaudible high frequencies from 18 k Hz to 22 k Hz generated via the inner speaker of smart devices.Using the proposed method,the performance is evaluated by conducting data transmission tests between a smart book and smart phone.The test results confirm that the proposed method can send 32 bits of data in an average of 235 ms,the transmission success rate reaches 99.47%,and the error detection rate of the cyclic redundancy check is0.53%.

An Approach towards Pulse Data Transmission Using Modified Negative Luo Converter (MNLC) for Telecoms

Telecom sectors generally operate at negative voltages to reduce the effect of corrosion caused in the metallic wire due to electrochemical reaction while communicating signals. To feed those lines and to have an effective digital data transmission, a power electronic converter referred as Modified Negative Luo Converter (MNLC) is proposed in this paper. MNLC is a high gain converter in which the output voltage increases in geometric progression. This paper portrays a novel concept of a 50 Hz pulse data transmission through RLCG (Resistance-inductance-capacitance with a shunt conductance) transmission line using MNLC. Signal frequency of 50 Hz to be transmitted is anded with a high frequency pulse that charges and discharges MNLC and produces the boosted negative output voltage. The boosted output is again transmitted through the RLCG transmission line from which 50 Hz data pulse is retrieved at the output of the transmission line by comparing with a comparator signal. This sort of MNLC aided data transmission not only introduces less loss in its transmitted data but also overcomes various health hazards of conventional radio frequency (RF) communication. This technique also proves that any data bit stream can be transmitted and retrieved using the proposed high gain DC-DC converter. The simulation model of the proposed system is implemented in MATLAB for various switching frequencies with its prototype of the converter developed and the results are verified.

Secured Data Transmission Using Modified LEHS Algorithm in Wireless Sensor Network

In the ancient block Hill cipher, the cipher text is obtained by multiplying the blocks of the plain text with the key matrix. To strengthen the keymatrix, a double guard Hill cipher was proposed with two key matrices, a private key matrix and its modified key matrix along with permutation. In the ancient block Hill cipher, the cipher text is obtained by multiplying the blocks of the plain text with the key matrix. To strengthen the key matrix, a double guard Hill cipher was proposed with two key matrices, a private key matrix and its modified key matrix along with permutation. In this paper a novel modification is performed to the double guard Hill cipher in order to reduce the number of calculation to obtain the cipher text by using non-square matrices. This modified double guard Hill cipher uses a non-square matrix of order (p × q) as its private keymatrix.

Improved Harris Hawks Optimization Algorithm Based Data Placement Strategy for Integrated Cloud and Edge Computing

Cloud computing is considered to facilitate a more cost-effective way to deploy scientific workflows.The individual tasks of a scientific work-flow necessitate a diversified number of large states that are spatially located in different datacenters,thereby resulting in huge delays during data transmis-sion.Edge computing minimizes the delays in data transmission and supports the fixed storage strategy for scientific workflow private datasets.Therefore,this fixed storage strategy creates huge amount of bottleneck in its storage capacity.At this juncture,integrating the merits of cloud computing and edge computing during the process of rationalizing the data placement of scientific workflows and optimizing the energy and time incurred in data transmission across different datacentres remains a challenge.In this paper,Adaptive Cooperative Foraging and Dispersed Foraging Strategies-Improved Harris Hawks Optimization Algorithm(ACF-DFS-HHOA)is proposed for optimizing the energy and data transmission time in the event of placing data for a specific scientific workflow.This ACF-DFS-HHOA considered the factors influencing transmission delay and energy consumption of data centers into account during the process of rationalizing the data placement of scientific workflows.The adaptive cooperative and dispersed foraging strategy is included in HHOA to guide the position updates that improve population diversity and effectively prevent the algorithm from being trapped into local optimality points.The experimental results of ACF-DFS-HHOA confirmed its predominance in minimizing energy and data transmission time incurred during workflow execution.