Development of Glass Optical Fibers 1970-2020,Providing Us the Digitalized Communication World

New types of communication cables were found to be needed already during the 1960-decade,because the copper cables had,and still would have,too high attenuation and especially limited bandwidth,due to extremely high dispersion at communication signals above 2 Mbit/s.Already the first commercially available multimode optical fibers(1979),developed from pure silica glass with a Ge-doped core,had much lower attenuation at signal frequencies of the order of 2-9 Mbit/s and above it.However,fiber core,cladding and coating materials,cable structures and materials,as well as manufacturing-,measurements-and test methods have been needed to be developed much further to get the reliable fiber cable communication networks.The important development stages and solutions to the most significant childhood problems of the optical fibers and cables are described in this paper.Now over 500 million km of optical fibers are manufactured and installed worldwide for the communication networks.The understanding of how to make the fibers with the very good transmission,mechanical and reliability properties exists at the manufacturers of the fibers and cables.

Properties and Applications of the Eccentric-gear Drive

The eccentric-gear can be used for variable speed transmission.But,due to the vibrations caused by variation of backlash in working process,the eccentric-gear is seldom applied in engineering project.There is just a little study about the eccentric-gear.And it is necessary to take a further research on eccentric-gear transmission for the applications in the transplanting mechanism of high-speed rice transplanter.The key of this paper is to extend understanding of three following characteristics of this drive：（1） The rotation-center-distance and the geometrical-center-distance of the two meshing eccentric gears are respectively the hypotenuse and the straight edge of a right triangle in a cycle.（2） The geometrical center line of two meshing gears divides the linking-line of the two rotational centers equally.（3） When two times the eccentricity of gear,the rotation-center-distance and the geometrical-center-distance form a right triangle,the optimal value of rotation-center-distance can be determined.In addition,the kinematic analysis,such as the relationship between contact point and midpoint of the linking-line of two gears＇ rotational centers,transmission ratio between the driving-gear and the driven-gear,contact angle and coordinate of contact point are be made,further the formula for calculation of contact force,flow chart for writing optimization program and curve for analysis of data are also be developed.The relationship between the rotation-center-distance and the geometrical-center-distance,which is determined by three characteristics mentioned above, is a key for the rational design and application of eccentric-gear transmission.Particularly,the presented right triangle property of eccentric gear drive is an important reference for effective analysis of dynamic characteristic of eccentric-gear mechanism and its reliable design.

Band-stop optical nanofilters with split-ring resonators based on metal–insulator–metal structure

Novel band-stop filters with circular split-ring resonators based on the metal-insulator-metal （MIM） structure are presented, with their transmission properties of SPPs propagating through the filter simulated by the finite-difference time-domain （FDTD） method, The variation of the gap of the split ring can affect the transmission characteristics, i.e., the transmission spectrum of SPPs exhibiting a shift, which is useful for modulating the filter. Linear and nonlinear media are used in the resonator respectively. By varying the refractive index of the linear medium, the transmission properties can be changed obviously, and the effect caused by changing the incident intensity with a nonlinear medium is similar. Several resonant modes that are applicable can be enhanced by changing the position of the gap of the split ring. Thus, the transmission properties can be modulated by adjusting the size of the gap, varying the refractive index, and changing the incident intensity of the input light. These methods may play significant roles in applications of optical integrated circuits and nanostructural devices.

Structures and magnetic behaviours of TiO_2-Mn-TiO_2 multilayers

The TiO2-Mn-TiO2multilayers are successfully grown on glass and silicon substrates by alternately using radio frequency reactive magnetron sputtering and direct current magnetron sputtering. The structures and the magnetic behaviours of these films are characterised with x-ray diffraction, transmission electron microscope （TEM）, vibrating sample magnetometer, and superconducting quantum interference device （SQUID）. It is shown that the multi-film consists of a mixture of anatase and rutile TiO2 with an embedded Mn nano-film. It is found that there are two turning points from ferromagnetic phase to antiferromagnetic phase. One is at 42 K attributed to interface coupling between ferromagnetic Mn3O4 and antiferromagnetic Mn2O3, and the other is at 97 K owing to the interface coupling between ferromagnetic Mn and antiferromagnetic MnO. The samples are shown to have ferromagnetic behaviours at room temperature from hysteresis in the M-H loops, and their ferromagnetism is found to vary with the thickness of Mn nano-film. Moreover, the Mn nano-film has a critical thickness of about 18.5 nm, which makes the coercivity of the multi-film reach a maximum of about 3.965 × 10^-2 T.

Experimental Investigation of Transmission Properties and All-Optical Label Swapping of Orthogonal IM/FSK Labeled Signals

OpticallylabeledIM/FSKsignalsaretransmittedover50kmofSMFunderdifferentcompensationschemes.All-optical label swapping based on MZ-SOA and EAM is presented. Transmission followed by label swapping shows a 2dB overall power penalty.

Synthesis and Properties of Monodisperse Superparamagnetic Mg_(0.8)Mn_(0.2)Fe_2O_4 Nanoparticles Using Polyol Reflux Method

Superparamagnetic monodisperse Mg0.8Mn0.2Fe2O4 nanoparticles have been successfully synthesized in liquid polyol at elevated temperature of 200 °C. Diethylene glycol（DEG） used here plays dual role in synthesis as it acts as reducing agent and alternatively coats the surface of nanoparticles while synthesis and thereby maintaining uniform size and dispersibility. Powder X-ray diffraction（XRD） and magnetic measurements showed that the sample is cubic spinel and superparamagnetic at room temperature. Raman spectra confirmed the formation of the Mg0.8Mn0.2Fe2O4 nanoparticles.The nanoparticles exhibit very good stability in water due to in situ coating with DEG molecules.