Receiver Power Allocation and Transmitter Power Control Analysis for Multiple-Receiver Wireless Power Transfer Systems

As different power has its own receivers,this paper analyzes and designs a multiple-receiver wireless power transfer(WPT)system systematically.The equivalent circuit model of the system is established to analyze the key parameters including transmitter power,receiver power,transmission efficiency,and each receiver power allocation.A control circuit is proposed to achieve the maximum transmission efficiency and transmitter power control and arbitrary receiver power allocation ratios for different receivers.Through the proposed control circuit,receivers with different loads can allocate appropriate power according to its power demand,the transmitter power and system efficiency do not vary with the change of the number of receivers.Finally,this control circuit is validated using a 130-kHz WPT system with three receivers whose power received is 3:10:12,and the overall system efficiency can reach as high as 55.5%.

RESEARCH ON TECHNOLOGY OF CONTROLLED SOURCE RADIO MAGNETOTELLURIC SYSTEM'S TRANSMITTER

The basic theory and principle of the artificial Controlled Source Radio Magneto Telluric(CSRMT) method is studied and a novel CSRMT transmitter in kH z frequency band is designed. The specific circuit and measured results of some key modules in transmitter are presented, and some outdoor experimental tests have been carried out, which shows that the completed prototype of transmitter can generate a continuous sine current with frequency up to 35.33 k Hz, peak-to-peak amplitude up to 40 A, and realize a reliable transmitting mode with multi-frequency and high-current. The transmitter has a wide operating band, large magnetic moment and high waveform fidelity, and can meet the requirements of shallow geological exploration with high-resolution.

Chip Design for In-Vehicle System Transmitter

This paper presents embedded system design of the In-Vehicle System (IVS) for the European Union (EU) emergency call (eCall) system. The IVS transmitter modules are designed, developed and implemented on a field programmable gate array (FPGA) device. The modules are simulated, synthesized, and optimized to be loaded on a reconfigurable device as a system-on-chip (SoC) for the IVS electronic device. All the modules of the transmitter are designed as a single embedded module. The bench-top test is completed for testing and verification of the developed modules. The hardware architecture and interfaces are discussed. The IVS signal processing time is analyzed for multiple frequencies. A range of appropriate frequency and two hardware interfaces are proposed. A state-of-the-art FPGA design is employed as a first implementation approach for the IVS prototyping platform. This work is used as an initial step to implement all the modules of the IVS on a single SoC chip.

Performance Analysis of Downlink MIMO WCDMA Systems Using Antenna Selection in Transmitter and MRC Plus LDD in Receiver over Correlated Nakagami-Fading Channels

In this paper bit error rate (BER) performance is analyzed for multiple input-multiple output (MIMO) communications systems using antenna selection in the transmitter, maximal ratio combining (MRC) and linear de-correlating detector (LDD) in the receiver in wide band code division multiple access (WCDMA) downlink channels with correlated Nakagami fading. The MRC maximizes signal to noise ratio of the received signal, then the LDD cancels out multiple access interference (MAI). Theoretical results are validated using computer simulations. Moreover, a pilot based estimation method is proposed to jointly estimate the channel gains and the rows of the LDD operator. Simulation results show that using this proposed method, diversity order is maintained in the receiver. Furthermore, our analysis shows the spectral efficiency degradation due to the pilot based strategy is negligible.

Heat stroke alters hippocampal and cerebellar transmitter metabonomics

BACKGROUND:The mechanisms underlying heat stroke(HS)-induced hippocampal injury remain unclear.This study aimed to evaluate the HS-induced metabonomics of hippocampal and cerebellar transmitters.METHODS:The HS model was established with male Sprague-Dawley rats subjected to heat exposure of up to 42℃ at a humidity of(55.0±5.0)%.The hippocampal and cerebellar transmitters and metabolites of rats were tested via ultra-high-performance liquid chromatography–mass spectrometry(UPLC-MS/MS).The primary transmitters and metabolites were identified by principal component analysis(PCA)and orthogonal partial least square-discriminant analysis(OPLS-DA).The major metabolic pathways for HS were selected after enrichment.The brain injury was evaluated by histological tests.RESULTS:HS induced hippocampal and cerebellar injuries in rats.HS upregulated the protein levels of hippocampal glutamate,glutamine,gamma-aminobutyric acid,L-tryptophan(Trp),5-hydroxy-indoleacetic acid,and kynurenine;however,it downregulated asparagine,tryptamine,5-hydroxytryptophan,melatonin,3,4-dihydroxyphenylalanine(L-DOPA),and vanillylmandelic acid.HS also sharply elevated the protein levels of cerebellar methionine and Trp,and decreased the levels of serotonin,L-alanine,L-asparagine,L-aspartate,cysteine,norepinephrine,spermine,spermidine,and tyrosine.Hippocampal glutamate,monoamine transmitters,cerebellar aspartate acid,and catecholamine transmitters’metabolic pathways were identified as the main metablic pathways in HS.CONCLUSION:The hippocampus and cerebellum were injured in rats with HS,possibly induced the disorder of hippocampal glutamate and serotonin metabolism,cerebellar aspartate acid and catecholamine transmitter metabolism,and related metabolic pathways.

Glass-Ceramics with High Strength and High Transmittance Obtained by Multi-Factor Controlling

The presence of Li_(2)Si_(2)O_(5) and LiAlSi_(4)O_(10) could effectively improve the elastic modulus and transmittance of lithium disilicate(LD)glass-ceramics.Through synergistically modulation of the crystal content and grain size,we obtained high strength and high transmittance of LD glass-ceramics.The optimal sample had a high transmittance of 90.3%,the hardness was 7.72 GPa,the fracture toughness was 1.07 MPa·m^(1/2),and the elastic modulus was 103.1 GPa.

Two-Stream Approximation to the Radiative Transfer Equation:A New Improvement and Comparative Accuracy with Existing Methods

Mathematical modeling of the interaction between solar radiation and the Earth's atmosphere is formalized by the radiative transfer equation(RTE), whose resolution calls for two-stream approximations among other methods. This paper proposes a new two-stream approximation of the RTE with the development of the phase function and the intensity into a third-order series of Legendre polynomials. This new approach, which adds one more term in the expression of the intensity and the phase function, allows in the conditions of a plane parallel atmosphere a new mathematical formulation of γparameters. It is then compared to the Eddington, Hemispheric Constant, Quadrature, Combined Delta Function and Modified Eddington, and second-order approximation methods with reference to the Discrete Ordinate(Disort) method(δ –128 streams), considered as the most precise. This work also determines the conversion function of the proposed New Method using the fundamental definition of two-stream approximation(F-TSA) developed in a previous work. Notably,New Method has generally better precision compared to the second-order approximation and Hemispheric Constant methods. Compared to the Quadrature and Eddington methods, New Method shows very good precision for wide domains of the zenith angle μ 0, but tends to deviate from the Disort method with the zenith angle, especially for high values of optical thickness. In spite of this divergence in reflectance for high values of optical thickness, very strong correlation with the Disort method(R ≈ 1) was obtained for most cases of optical thickness in this study. An analysis of the Legendre polynomial series for simple functions shows that the high precision is due to the fact that the approximated functions ameliorate the accuracy when the order of approximation increases, although it has been proven that there is a limit order depending on the function from which the precision is lost. This observation indicates that increasing the order of approximation of the phase function of the RTE leads to a better precision in flux calculations. However, this approach may be limited to a certain order that has not been studied in this paper.

Electro-Optical Model of Soiling Effects on Photovoltaic Panels and Performance Implications

In this paper,a detailed model of a photovoltaic(PV)panel is used to study the accumulation of dust on solar panels.The presence of dust diminishes the incident light intensity penetrating the panel’s cover glass,as it increases the reflection of light by particles.This phenomenon,commonly known as the“soiling effect”,presents a significant challenge to PV systems on a global scale.Two basic models of the equivalent circuits of a solar cell can be found,namely the single-diode model and the two-diode models.The limitation of efficiency data in manufacturers’datasheets has encouraged us to develop an equivalent electrical model that is efficient under dust conditions,integrated with optical transmittance considerations to investigate the soiling effect.The proposed approach is based on the use of experimental current-voltage(I-V)characteristics with simulated data using MATLAB/Simulink.Our research outcomes underscores the feasibility of accurately quantifying the reduction in energy production resulting from soiling by assessing the optical transmittance of accumulated dust on the surface of PV glass.

Fairness-Oriented Hybrid Precoding for Massive MIMO Maritime Downlink Systems with Large-Scale CSIT

Different from conventional cellular networks, a maritime communication base station(BS) has to cover a much wider area due to the limitation of available BS sites. Accordingly the performance of users far away from the BS is poor in general. This renders the fairness among users a challenging issue for maritime communications. In this paper, we consider a practical massive MIMO maritime BS with hybrid digital and analog precoding. Only the large-scale channel state information at the transmitter(CSIT) is considered so as to reduce the implementation complexity and overhead of the system. On this basis, we address the problem of fairness-oriented precoding design. A max-min optimization problem is formulated and solved in an iterative way. Simulation results demonstrate that the proposed scheme performs much better than conventional hybrid precoding algorithms in terms of minimum achievable rate of all the users, for the typical three-ray maritime channel model.

Dopamine: an immune transmitter

The dopaminergic system controls several vital central nervous system functions, including the control of movement, reward behaviors and cognition. Alterations of dopaminergic signaling are involved in the pathogenesis of neurodegenerative and psychiatric disorders, in particular Parkinson’s disease, which are associated with a subtle and chronic inflammatory response. A substantial body of evidence has demonstrated the non-neuronal expression of dopamine, its receptors and of the machinery that governs synthesis, secretion and storage of dopamine across several immune cell types. This review aims to summarize current knowledge on the role and expression of dopamine in immune cells. One of the goals is to decipher the complex mechanisms through which these cell types respond to dopamine, in order to address the impact this has on neurodegenerative and psychiatric pathologies such as Parkinson’s disease. A further aim is to illustrate the gaps in our understanding of the physiological roles of dopamine to encourage more targeted research focused on understanding the consequences of aberrant dopamine production on immune regulation. These highlights may prompt scientists in the field to consider alternative functions of this important neurotransmitter when targeting neuroinflammatory/neurodegenerative pathologies.

Novel DDS Based OFDM Transmitter Structure without IFFT and Interpolation Filter

The traditional orthogonal frequency divi-sion multiplexing(OFDM)transmitter is implemented by inverse fast Fourier transform(IFFT),up-sampling and low pass shaping filter(LPSF),which occupy a large number of hardware resources and have long la-tency.To further meet the 5G and future 6G commu-nication requirements,this paper proposes a novel di-rect digital synthesis(DDS)based OFDM transmitter structure that can replace these modules.Due to the strong parallelism of the system structure,it is very suitable for implementation on field programable gate array(FPGA)platform.After making two special sim-plifications to the primary structure,the refined struc-ture becomes very simple compared with the tradi-tional structures.Most attractively,the proposed struc-ture has the following three advantages that i)the data transformation from frequency domain to time domain has zero latency,ii)the transformation length does not need to be an integer power of 2 and iii)the struc-ture does not even need to use any multiplier,thus leading to low implementation complexity and high speed.Comparative experiments are carried out on Intel FPGA platform which show that our DDS based structure can save more than half of the resources com-pared with the traditional structures and can provide the same bit error rate(BER)performance under the condition without using any LPSF.

SEMI-SUPERVISED RADIO TRANSMITTER CLASSIFICATION BASED ON ELASTIC SPARSITY REGULARIZED SVM

Non-collaborative radio transmitter recognition is a significant but challenging issue, since it is hard or costly to obtain labeled training data samples. In order to make effective use of the unlabeled samples which can be obtained much easier, a novel semi-supervised classification method named Elastic Sparsity Regularized Support Vector Machine (ESRSVM) is proposed for radio transmitter classification. ESRSVM first constructs an elastic-net graph over data samples to capture the robust and natural discriminating information and then incorporate the information into the manifold learning framework by an elastic sparsity regularization term. Experimental results on 10 GMSK modulated Automatic Identification System radios and 15 FM walkie-talkie radios show that ESRSVM achieves obviously better performance than KNN and SVM, which use only labeled samples for classification, and also outperforms semi-supervised classifier LapSVM based on manifold regularization.

Optimization Design for the Sandwich Piezoelectric Transmitters in Acoustic Logging

An optimized transducer prototype with a sandwich structure vibrated longitudinally is proposed for a transmitter in acoustic logging, especially in acoustic logging while drilling, 5y taking account of drilling environments with high temperature and pressure, as well as strong collar drilling vibration during the drilling process. Aimed to improve the transmitting performance, numerical and experimental studies for the transducer optimization are conducted. The impact of location and length of the piezoelectric stack on resonance characteristics arid effective electromeehanical coupling coefficient is calculated and analyzed. Admittance and transmitting performance of the proposed transducer are measured in laboratory experiments, and the results are compared with simulated ones. It is shown that the newly proposed transducer has higher transmitting performance with lower resonance frequencies. This work provides theoretical and experimental bases for transducer designing and acoustic wave measurements in acoustic logging, especially in acoustic logging while drilling.

A 2.4-GHz-Low-Power CMOS RF Transmitter for IEEE 802.15.4 Standard

This paper presents the experimental results of a low-power RF transmitter for 2.4-GHz-band IEEE 802.15.4 standard in 0.18-μm CMOS technology. In order to make an adaptive RF transmitter, several factors must be considered. The most important factors are performances, power consumption, output power, noise factor, and cost. The RF transmitter comprises a quadrature passive mixer, and a power amplifier. The proposed RF transmitter consumes only 10.8-mW under a supply voltage of 1.8-V.

Assessment of a Novel Surgical Technique for Acoustic Transmitter Insertion

This study compared three surgical techniques to implant acoustic transmitters in rainbow trout (Oncorhynchus mykiss): 1) acoustic transmitter insertion via a ventral incision closed with two sutures, 2) insertion via a ventral incision with no sutures, 3) insertion via a lateral incision with no sutures. A control group consisting of fish that were only anesthetized and handled was also included. Tag retention, wound healing, inflammation, growth, and survival were recorded over a 12-week period. Tag retention was significantly different among the treatments, at 100% in the unsutured ventral incision group, 89% in the lateral incision group, and 63% in the sutured ventral incision group. Surgical wounds in the unsutured treatment groups showed significantly less inflammation than the sutured treatment. Wound closure occurred significantly faster in the ventral incision groups compared to the lateral incision group. The results of this study show the utility of using unsutured surgical methods for implanting acoustic transmitters in rainbow trout.

A 12-Bit 1-Gsample/s Nyquist Current-Steering DAC in 0.35 µm CMOS for Wireless Transmitter

The present work deals with 12-bit Nyquist current-steering CMOS digital-to-analog converter (DAC) which is an essential part in baseband section of wireless transmitter circuits. Using oversampling ratio (OSR) for the proposed DAC leads to avoid use of an active analog reconstruction filter. The optimum segmentation (75%) has been used to get the best DNL and reduce glitch energy. This segmentation ratio guarantees the monotonicity. Higher performance is achieved using a new 3-D thermometer decoding method which reduces the area, power consumption and the number of control signals of the digital section. Using two digital channels in parallel, helps reach 1-GSample/s frequency. Simulation results show that the spurious- free-dynamic-range (SFDR) in Nyquist rate is better than 64 dB for sampling frequency up to 1-GSample/s. The analog voltage supply is 3.3 V while the digital part of the chip operates with only 2.4 V. Total power consumption in Nyquist rate measurement is 144.9 mW. The chip has been processed in a standard 0.35 μm CMOS technology. Active area of chip is 1.37 mm2.

Novel Surgical Technique for Acoustic Transmitter Insertion in Rainbow Trout Reduces the Need for Surgical Training

The implantation of acoustic transmitters into the peritoneal cavity of fish is typically performed by experienced surgeons. This study compared the effectiveness of an experienced and inexperienced surgeon performing two different types of transmitter insertion techniques on rainbow trout (Oncorhynchus mykiss). The methods used were either a traditional sutured ventral incision or a novel unsutured lateral incision. There was no significant difference in surgical duration, tag retention, or fish survival between the experienced and naïve surgeon. The time to complete surgical wound closure was not significantly different between the fish operated on by an experienced or naïve surgeon, and surgeon experience had no significant effect on the duration of inflammation. However, there were significant differences between the two surgical techniques, regardless of surgeon experience. The ventral incision with sutures method took approximately three times longer to complete than the lateral incision-only method. However, complete wound closure was significantly faster in the sutured ventral incision treatment compared to the unsutured lateral treatment. Post-surgery inflammation was over seven times longer in the fish with sutures compared to those only receiving a lateral incision. Tag retention was not significantly different between the two surgical methods. The results of this study indicate that the unsutured lateral surgical technique used in this experiment can be completed with minimal training and surgical experience in contrast to the standard technique requiring sutures. These results also provide additional support to the use of sutureless surgical techniques for acoustic transmitter implantation.

EFFECTS OF MOXIBUSTION ON THE IMMUNITY AND THE CENTRAL NERVOUS TRANSMITTERS IN MICE WITH YANG DEFICIENCY

In the present paper, the effects of moxibustion on the immune organs, on the multiplication reactivity of the splenic lymphocyte and the reactivity to the IL - 2, and on the transmitters in brain tissues of the mice with "yang deficiency" were studied. 30 mice were randomly divided into three groups: the normal group, the peng deficiency control group and the moxibustion treated group. Our study found out that in the mice of yang deficienly, the atrophy of the immunt organs was prevented, the reactivity of the splenocyte and the reactivity to IL - 2 were heightened, the amounts of the DA, NE and E in brain were increased significantly after moxibustion on the Point Shengshu. It can be held that moxibustion may protect the immune organs and regulate the immunity of the mouse with yang deficienly, and the effects may be contributed to the increase of the nervous transmitters in the brain.

INFLUENCE OF EA ON ELECTROCARDIOGRAM AND MONOAMINE TRANSMITTER AND c-Fos OF BRAIN STEM OF ACUTE MYOCARDIAL ISCHEMIA IN RATS

The present study aimed at the investigation of the changes of electrocardiogram (ECG) and monoamine transmitters in brainstem of rats with acute myocardial ischemia (AMl) with electroacupuncture (EA) at Neiguan (PC 6) and Jianshi (PC 5) treated by means of physiologic and histofluorescent and immunofluorescent methods. The results are as follows: 1. EA couId prevent ST segrnent and T wave from elevating during acute myocardial ischemia (P < 0. 05 ). 2. Monoamine-containing neurons with clear figure and bright fluoreasence, pre-and terminal axons were seen in Iocus coeruleus,lateral horn of splnal cord in two groups by the high specific sensitivity histofluorescence technique.The reaction of fluorescence was stronger in EA group than that in control one. The serotonin (5-HT) immunoreactive (ir) cells appeared in nucleus raphe (B 1, B 2). The 5-HT ir grains were more intense in EA group than that in control group. Tyrosine hydrotylase (TH) immunoreactive (ir) cell bodies were found within confines of catecholaminergic nuclei (A 1, A 2 ) of medulla. The immunofluorescence was weaker in EA group than that in control one. The results suggest that EA may regulate acute myocardial ischemia through brain stem.

High Power RF Transmitters for ICRF Applications on EAST

An Ion Cyclotron Range of Frequency （ICRF） system with a radio frequency （RF） power of 4×1.5 MW was developed for the Experimental Advanced Superconducting Tokamak （EAST）. High RF power transmitters were designed as a part of the research and development （R^D） for an ICRF system with long pulse operation at megawatt levels in a frequency range of 25 MHz to 70 MHz. Studies presented in this paper cover the following parts of the high power transmitter： the three staged high power amplifier, which is composed of a 5 kW wide- band solid state amplifier, a 100 kW tetrode drive stage amplifier and a 1.5 MW tetrode final stage amplifier, and the DC high voltage power supply （HVPS）. Based on engineering design and static examinations, the RF transmitters were tested using a matched dummy load where an RF output power of 1.5 MW was achieved. The transmitters provide 6 MW RF power in primary phase and will reach a level up to 12 MW after a later upgrade. The transmitters performed successfully in stable operations in EAST and HT-7 devices. Up to 1.8 MW of RF power was injected into plasmas in EAST ICRF heating experiments during the 2010 autumn campaign and plasma performance was greatly improved.