Fatigue Performance of Orthotropic Steel Decks in Super-Wide Steel Box Girder Considering Transverse Distribution of Vehicle Load

This study presents an investigation on the fatigue analysis of four types of details on orthotropic steel decks(OSDs)for a cable-stayed super-wide steel box girder bridge based on finite-element analysis(FEA)with vehicle transverse distribution model(VTDM).A high-fidelity 3D FE model verified by the static load test is established to satisfy the fatigue analysis accuracy.The stress behavior of super-wide steel box girders under the vehicle load at different lane locations is investigated.Then,considering the effect of VTDM,the fatigue life analysis of four typical details is performed using the Miner cumulative damage rule.The results show that the vehicle transverse location has a great influence on the stress behavior of details with sharp influence surface,and the stress ranges in the outermost lane are larger than those in other lanes,indicating that the details of OSD in the outermost lane are prone to fatigue.The fatigue life analysis indicates that the diaphragm cutout is more prone to fatigue than other details,which should be carefully treated in bridge maintenance.

RESEARCHES ON THE TRANSVERSE DISTRIBUTION OF SUSPENDED LOAD CONCENTRATION

In the paper the simplified three-dimensional turbulent diffusion equation ofthe suspended load is deduced by the power series method. The formula on the transversedistribution of the suspended load concentration is obtained, which is tested by a few field data onYangtze River. The simulation results indicate that the calculated data are in primary agreementwith the field data within the allowable error. It is certain value in theory and practice.

Simulations of ice jam thickness distribution in the transverse direction

River ice often forms in the cold regions of northern hemisphere which can lead to ice jams （or ice dams）. Water level can be significantly raised due to ice jams. As a consequence, disastrous ice flooding may be resulted, such as the ice jam flooding in the Nechako River in Prince George in winter 2007-2008. In the present study, the equations describing the ice jam thickness in the transverse direction are derived. The impact of the secondary vortex is considered while the cohesive force within ice cubes is neglected in the model. The relationship between the parameter β and the total water depth is established based on the assumption that all other variables except the velocities are kept constant on the same cross section. By using the parameter β and the developed equations, the ice jam thickness in the transverse direction can be predicted. The developed model is used to simulate the ice jam thickness in the transverse direction at the Hequ Reach of the Yellow River in China. The simulated ice jam thicknesses agree well with the field measurements on different cross sections.

Rayleigh-like distribution of particle transverse momenta in collisions at high energies

The transverse momentum distributions of final-state particles produced in collisions at high en-ergies are studied by using a two-component Rayleigh-like distribution.This representation is based on Liu＇s multisource ideal gas model which describes protons and fragments in high energy nucleus-nucleus collisions.The calculated results are in good agreement with the experimental data of Au-Au,Cu-Cu,d-Au,and pp collisions at the relativistic heavy ion collider energies.The experimental particle momentum distributions of p-Be collisions at 6.4,12.3,and 17.5 GeV/c,as well as Au-Au collisions at 1.5 AGeV are well described by a model based on a single Rayleigh-like distribution of particle transverse momenta.

Improved Pattern Clustering Algorithm for Recognizing Transversal Distribution of Steel Strip Thickness

Transversal distribution of the steel strip thickness in the entry section of the cold rolling mill seriously affects to the flatness and transversal thickness precision of the final products. Pattern clustering method is introduced into the steel rolling field and used in the patterns recognition of transversal distribution of the steel strip thickness. The well-known k-means clustering algorithm has the advantage of being easily completed, but still has some drawbacks. An improved k-means clustering algorithm is presented, and the main improvements include： （1） the initial clustering points are preselected according to the density queue of data objects; and （2） Mahalanobis distance is applied instead of Euclidean distance in the actual application. Compared to the patterns obtained from the common kmeans algorithm, the patterns identified by the improved algorithm show that the improved clustering algorithm is well suitable for the patterns＇ recognition of transversal distribution of steel strip thickness and it will be useful in online quality control system.

Particle image velocimetry measurement of velocity distribution at inlet duct of waterjet self-propelled ship model

A vehicle-mounted three-dimensional underwater particle image velocimetry（PIV） device is used in a towing tank to measure the velocity distribution of the inlet duct of a waterjet ship model in a self-propulsion test. The following points are shown through a comparison of the influences of the stationary and free states of the ship model on the measured results：（1） during the test, the ship attitude will change, specifically, the ship model will heave and trim,（2） the degree of freedom disturbs the processing of the pixel images enough to distort the subsequent image processing,（3） the stationary state of the ship model is the optimal mode for measuring the velocity distribution using the PIV device, and（4） if the changes must be considered, the man-made heaving and trimming may be pre-applied, and be made a corrected stationary mode. In addition, the momentum effect coefficient and the energy effect coefficient are calculated in a non-uniform inflowing state, and the related factors affecting the two coefficients are analyzed. The test results show that the pumping action of the waterjet creates a transverse vector in the cross-sectional speed, which increases the non-uniformity of the inflow. These results could help to establish the design requirements for a waterjet-propelled ship type.

Generating a uniform transverse distributed electron beam along a beam line

It has been reported that transverse distribution shaping can help to further enhance the energy extraction efficiency in a terawatt, tapered X-ray free-electron laser. Thus, methods of creating and keeping an almost uniform transverse distributed（UTD） beam within undulators are required. This study shows that a UTD electron beam can be generated within evenly distributed drift sections where undulators can be placed, by means of octupoles and particular optics. A specific design is presented, and numerical simulations are performed to verify the proposed method.

Electron-ion collider in China

Lepton scattering is an established ideal tool for studying inner structure of small particles such as nucleons as well as nuclei.As a future high energy nuclear physics project,an Electron-ion collider in China(EicC)has been proposed.It will be constructed based on an upgraded heavy-ion accelerator,High Intensity heavy-ion Accelerator Facility(HIAF)which is currently under construction,together with a new electron ring.The proposed collider will provide highly polarized electrons(with a po-larization of 80%)and protons(with a polarization of 70%)with variable center of mass energies from 15 to 20 GeV and the luminosity of(2–3)×1033 cm^(−2)·s^(−1).Polarized deuterons and Helium-3,as well as unpolarized ion beams from Carbon to Uranium,will be also available at the EicC.The main foci of the EicC will be precision measurements of the structure of the nucleon in the sea quark region,including 3D tomography of nucleon;the partonic structure of nuclei and the parton interaction with the nuclear environment;the exotic states,especially those with heavy flavor quark contents.In addition,issues fundamental to understanding the origin of mass could be addressed by measurements of heavy quarkonia near-threshold production at the EicC.In order to achieve the above-mentioned physics goals,a hermetical detector system will be constructed with cutting-edge technologies.This document is the result of collective contributions and valuable inputs from experts across the globe.The EicC physics program complements the ongoing scientific programs at the Jefferson Laboratory and the future EIC project in the United States.The success of this project will also advance both nuclear and particle physics as well as accelerator and detector technology in China.

Projectile fragment emission in the fragmentation of ^(56)Fe on C,Al and CH_2 targets at 471 A MeV

The emission angle and the transverse momentum distributions of projectile fragments produced in the fragmentation of 56Fe on CHs, C and A1 targets at 471 A MeV are measured. It is found that for the same target, the average value and width of the angular distribution decrease with an increase of the projectile fragment charge; for the same projectile fragment, the average value of the distribution increases and the width of the distribution decreases with increasing the target charge number. The transverse momentum distribution of a projectile fragment can be explained by a single Gaussian distribution and the averaged transverse momentum per nucleon decreases with the increase of the charge of projectile fragment. The cumulated squared transverse momentum distribution of a projectile fragment can be explained well by a single Rayleigh distribution. The temperature parameter of the emission source of the projectile fragment, calculated from the cumulated squared transverse momentum distribution, decreases with the increase of the size of the projectile fragment.

Strange particle production in relativistic nucleus-nucleus collisions at RHIC and LHC energy regions

PACIAE, a parton and hadron cascade model, is utilized to systematically investigate strange particle production and strangeness enhancement in Au＋Au collisions and in Pb＋Pb collisions with the √SNN = 200 GeV at the RHIC and 2.76 TeV at the LHC, respectively. The experimental results at different centralities, using data from the STAR collaboration and the ALICE collaboration, are well described by the PACIAE model. This may represent the importance of the parton and hadron rescatterings, as well as the reduction mechanism for strange quark suppression, that are implemented in the PACIAE model.

Effects of inelastic (re)scattering processes s→gg and gg→s on strange hadron production in pp collisions at RHIC and LHC energies

The rapidity densities at mid-rapidity and the transverse momentum distributions for strange hadrons produced in pp collisions are analyzed using the modified PACIAE model by considering the effect of inelastic （re）scattering processes ss -→gg and gg→ss in parton （re）scattering. The calculated results of the transverse momentum spectra of the strangeness fitting with data measured by STAR and ALICE Collaborations can be improved, especially at large transverse momentum levels. This demonstrates that the effect of inelastic （re）scattering processes of ss→gg and gg→ss is not negligible at RHIC and LHC energy levels.

Strange particle production in relativistic nucleus-nucleus collisions in the RHIC BES energy region

The parton and hadron cascade model PACIAE is used to investigate strange particle production in Au ＋ Au collisions at √s = 62.4 GeV in different centralities and at √s =39, 11.5 and 7.7 GeV in the most central collision, respectively. It is shown that the transverse momentum distributions of strange particles by the PACIAE model fit the RHIC Beam Energy Scan experimental results well.