Torsional vibration of a pipe pile in transversely isotropic saturated soil

This study considers the torsional vibration of a pipe pile in a transversely isotropic saturated soil layer. Based on Biot＇s poroelastic theory and the constitutive relations of the transversely isotropic medium, the dynamic governing equations of the outer and inner transversely isotropic saturated soil layers are derived. The Laplace transform is used to solve the governing equations of the outer and inner soil layers. The dynamic torsional response of the pipe pile in the frequency domain is derived utilizing 1D elastic theory and the continuous conditions at the interfaces between the pipe pile and the soils. The time domain solution is obtained by Fourier inverse transform. A parametric study is conducted to demonstrate the influence of the anisotropies of the outer and inner soil on the torsional dynamic response of the pipe pile.

Vertical vibration of a large diameter pipe pile considering transverse inertia effect of pile

Considering the transverse inertia effect of pile, the vertical soil layer is studied. The wave propagations in the outer and inner soil dynamic response of a large diameter pipe pile in viscoelastic are simulated by three-dimensional elastodynamic theory and those in the pile are simulated by Rayleigh-Love rod theory. The vertical and radial displacements of the outer and inner soil are obtained by utilizing Laplace transform technique and differentiation on the governing equations of soils. Then, based on the continuous conditions between the pile and soils, the displacements of the pile are derived. The frequency domain velocity admittance and time domain velocity response of the pile top are also presented. The solution is compared to a classical rod model solution to verify the validity. The influences of the radii and Poisson ratio of pile on the transverse inertia effect of pile are analyzed. The parametric study shows that Poisson ratio and outer radius of pile have significant influence on the transverse inertia effect of large diameter pipe piles, while the inner radius has little effect.

Modal analysis on transverse vibration of axially moving roller chain coupled with lumped mass

The modal characteristics of the transverse vibration of an axially moving roller chain coupled with lumped mass were analyzed.The chain system was modeled by using the multi-body dynamics theory and the governing equations were derived by means of Lagrange's equations.The effects of the parameters,such as the axially moving velocity of the chain,the tension force,the weight of lumped mass and its time-variable assign position in chain span,on the modal characteristics of transverse vibration for roller chain were investigated.The numerical examples were given.It is found that the natural frequencies and the corresponding mode shapes of the transverse vibration for roller chain coupled with lumped mass change significantly when the variations of above parameters are considered.With the movement of the chain strand,the natural frequencies present a fluctuating phenomenon,which is different from the uniform chain.The higher the order of mode is,the greater the fluctuating magnitude and frequency are.

Modeling and solving for transverse vibration of gear with variational thickness

A analyzed model of gear with wheel hub, web and rim was derived from the Mindlin moderate plate theory. The gear was divided into three annular segments along the locations of the step variations. Traverse displacement, rotation angle, shear force and fiexural moment were equal to ensure the continuity along the interface of the wheel hub, web and rim segments. The governing differential equations for harmonic vibration of annular segments were derived to solve the gear vibration problem. The influence of hole to diameter ratios, segment thickness ratios, segment location ratios, Poisson ratio on the vibration behavior of stepped circular Mindlin disk were calculated, tabletted and plotted. Comparisons were made with the frequencies arising from the presented method, finite elements method, and structure modal experiment. The result correlation among these three ways is very good. The largest error for all frequencies is 5.46%, and less than 5% for most frequencies.

EXACT SOLUTIONS FOR FREE VIBRATIONS OF TRANSVERSELY ISOTROPIC CIRCULAR PLATES

By virtue of the general solution of dynamic elasticity equations for transverse isotropy as well as the variable separation method, three-dimensional exact solutions of circular plates are obtained under two types of boundary conditions. The solutions can consider both axisymmetric and non-axisymmetric cases. Solutions based on the classical plate theory and Mindlin plate theory are also presented under the corresponding boundary conditions. Numerical results are finally presented and comparisons between the three theories are made.

A FINITE DIFFERENCE METHOD FOR SIMULATING TRANSVERSE VIBRATIONS OF AN AXIALLY MOVING VISCOELASTIC STRING

A finite difference method is presented to simulate transverse vibrations of an axially moving string. By discretizing the governing equation and the equation of stress strain relation at different frictional knots, two linear sparse finite difference equation systems are obtained. The two explicit difference schemes can be calculated alternatively, which make the computation much more efficient. The numerical method makes the nonlinear model easier to deal with and of truncation errors, O（△t^2 ＋ △x^2）. It also shows quite good stability for small initial values. Numerical examples are presented to demonstrate the efficiency and the stability of the algorithm, and dynamic analysis of a viscoelastic string is given by using the numerical results.

Atomistic simulation of free transverse vibration of graphene,hexagonal SiC, and BN nanosheets

Free transverse vibration of monolayer graphene, boron nitride (BN), and silicon carbide (SiC) sheets is investigated by using molecular dynamics finite element method. Eigenfrequencies and eigenmodes of these three sheets in rectangular shape are studied with different aspect ratios with respect to various boundary conditions. It is found that aspect ratios and boundary conditions affect in a similar way on natural frequencies of graphene, BN, and SiC sheets. Natural frequencies in all modes decrease with an increase of the sheet’s size. Graphene exhibits the highest natural frequencies, and SiC sheet possesses the lowest ones. Missing atoms have minor effects on natural frequencies in this study.

Complex-mode Galerkin approach in transverse vibration of an axially accelerating viscoelastic string

Under the consideration of harmonic fluctuations of initial tension and axially velocity, a nonlinear governing equation for transverse vibration of an axially accelerating string is set up by using the equation of motion for a 3-dimensional deformable body with initial stresses. The Kelvin model is used to describe viscoelastic behaviors of the material. The basis function of the complex-mode Galerkin method for axially accelerating nonlinear strings is constructed by using the modal function of linear moving strings with constant axially transport velocity. By the constructed basis functions, the application of the complex-mode Galerkin method in nonlinear vibration analysis of an axially accelerating viscoelastic string is investigated. Numerical results show that the convergence velocity of the complex-mode Galerkin method is higher than that of the real-mode Galerkin method for a variable coefficient gyroscopic system.

Transverse vibration characteristics of axially moving viscoelastic plate

The dynamic characteristics and stability of axially moving viscoelastic rectangular thin plate are investigated. Based on the two dimensional viscoelastic differential constitutive relation, the differential equations of motion of the axially moving viscoelastic plate are established. Dimensionless complex frequencies of an axially moving viscoelastic plate with four edges simply supported, two opposite edges simply supported and other two edges clamped are calculated by the differential quadrature method. The effects of the aspect ratio, moving speed and dimensionless delay time of the material on the trans- verse vibration and stability of the axially moving viscoelastic plate are analyzed.

TRANSVERSE VIBRATION CHARACTERISTICS OF VISCOELASTIC RECTANGULAR PLATE WITH CRACK

Based on the two-dimensional viscoelastic differential constitutive relation and the thin plate theory, the differential equations of motion of the viscoelastic plate with an all-over part-through crack are established and the expression of additional rotation induced by the crack is derived. The complex eigenvalue equations of the viscoelastic plate with crack are derived by the differential quadrature method, and the 8method is used at the crack continuity conditions. Dimensionless complex frequencies of a crack viscoelastic plate with four edges simply supported, two opposite edges simply supported and other two edges clamped are calculated. The effects of the crack parameter, the aspect ratio and dimensionless delay time of the material on the transverse vibration of the viscoelastic plate are analyzed.

Transverse Vibration Analysis of Single-Walled Carbon Nanotubes Embedded in an Elastic Medium Using Bernoulli-Fourier Method

Based on the Timoshenko beam theory and Bernoulli-Fourier method, a single-elastic beam model is developed for transverse vibrations of single-walled carbon nanotubes under additional axial load, which includes the effects of the elastic medium around them. Explicit expressions are derived for the natural frequencies and transversal responses of simply supported single-walled carbon nanotubes. The influence of addition axial load and the properties of elastic medium on the vibrations are discussed. The results showed that the effects of addition axial load on the lower natural frequencies of single-walled carbon nanotubes are sensitive to the lower vibration modes and the stiff elastic medium. The lower natural frequencies depend on the axial load;they become smaller with increasing axial load and vary with the vibration modes. In addition, except for the first mode, the effects of the axial load on the stiff elastic medium are considerably greater than those on the flexible one. However, the constants of the elastic medium have little effect on the first mode. The critical axial buckling stress and strain for simply-supported single-walled carbon nanotubes are also obtained.

Transverse Vibration and Stability Analysis of Circular Plate Subjected to Follower Force and Thermal Load

Transverse vibration and stability analysis of circular plate subjected to follower force and thermal load are analyzed.Based on the thin plate theory in involving the variable temperature,the differential equation of transverse vibration for the axisymmetric circular plate subjected to follower force and thermal load is established.Then,the differential equation of vibration and corresponding boundary conditions are discretized by the differential quadrature method.Meanwhile,the generalized eigenvalue under three different boundary conditions are calculated.In this case,the change curve of the first order dimensionless complex frequency of the circular plate subjected to the follower force in the different conditions with the variable temperature coefficient and temperature load is analyzed.The stability and corresponding critical loads of the circular plate subjected to follower force and thermal load with simply supported edge,clamped edge and free edge are discussed.The results provide theoretical basis for improving the dynamic stability of the circular plate.

Transverse Vibration Analysis of Concentrated Mass-Loaded Thin Circular Plate Based on Strcutural Circumferential Periodicity

The structural circumferential periodicity of inertial excitation produced by concentrated mass was utilized to establish the mathematical model of thin circular plate carrying eccentric concentrated mass and to analyze its transverse vibration. The fundamental frequency coefficient, natural frequency and mode shape function are determined by this method. A clamped thin circular plate was taken as an example to study the mass effect on the vibrating system.Comparison between the present results and published ones exhibits excellent agreement, which shows that the analytical method in this paper can be used to predict the transverse vibration parameters accurately.

Transverse vibrations of arbitrary non-uniform beams

Free and steady state forced transverse vibrations of non-uniform beams are investigated with a proposed method, leading to a series solution. The obtained series is verified to be convergent and linearly independent in a convergence test and by the non-zero value of the corresponding Wronski determinant, respectively. The obtained solution is rigorous, which can be reduced to a classical solution for uniform beams. The proposed method can deal with arbitrary non-uniform Euler-Bernoulli beams in principle, but the methods in terms of special functions or elementary functions can only work in some special cases.

AN APPROXIMATE SOLUTION OF EIGEN－FREQUENCIES OF TRANSVERSE VIBRATION OF RECTANGULAR PLATES WITH ELASTICAL RESTRAINTS

This poper presents an approximate solution for calculating eigen-frequencies of transverse vibration of rectangular plates elastically restrained against rotation along edges. The formulae are not only very simple and easily programmed but also have high accuracy. Finally, some numerical results are given and compared with other results obtained.

Nonlinear free vibration of reticulated shallow spherical shells taking into account transverse shear deformation

This paper deals with nonlinear free vibration of reticulated shallow spherical shells taking into account the effect of transverse shear deformation. The shell is formed by beam members placed in two orthogonal directions. The nondimensional fundamental governing equations in terms of the deflection, rotational angle, and force function are presented, and the solution for the nonlinear free frequency is derived by using the asymptotic iteration method. The asymptotic solution can be used readily to perform the parameter analysis of such space structures with numerous geometrical and material parameters. Numerical examples are given to illustrate the characteristic amplitudefrequency relation and softening and hardening nonlinear behaviors as well as the effect of transverse shear on the linear and nonlinear frequencies of reticulated shells and plates.

TORSIONAL VIBRATIONS OF RIGID CIRCULAR PLATE ON TRANSVERSELY ISOTROPIC SATURATED SOIL

An analytical method was presented for the torsional vibrations of a rigid disk resting on transversely isotropic saturated soil. By Hankel transform, the dynamic governing differential equations for transversely isotropic saturated poroelastic medium were solved. Considering the mixed boundary-value conditions, the dual integral equations of torsional vibrations of a rigid circular plate resting on transversely isotropic saturated soil were established. By appropriate transform, the dual integral equations were converted into a Fredholm integral equation of the second kind. Subsequently, the dynamic compliance coefficient, the torsional angular amplitude of the foundation and the contact shear stress were expressed explicitly. Selected examples were presented to analyse the influence of saturated soil＇s anisotropy on the foundation＇s vibrations.

Forced transverse vibration of rolls for four-high rolling mill

In order to investigate the forced transverse vibration of rolls under distributed draught pressure and moment of bending roll force, the forced transverse vibration model of rolls for four-high rolling mill was established. The work roll and backup roll were considered as elastic continuous bodies that were joined by a Winkler elastic layer. According to Euler-Bemoulli beam theory, the forced transverse vibration of rolls was analyzed based on modal superposition method. The forced vibration equations were established when the draught pressure and moment of bending roll force were imposed on the rolls respectively. Numerical modeling was made on 2 030 mm cold tandem rolling mill of Baoshan Iron and Steel Company. Simulation results show that when the work roll is only subjected to different forms of draught pressures, the vibration curves of work roll and backup roll are quadratic curves with amplitudes of 0.3 mm and 45 μm, respectively. When only the moments of bending roll force are imposed on the work roll and backup roll, the vibration curves of work roll and backup roll are quadratic curves, and the amplitudes are 5.0 and 1.6 μm, respectively. The influence of moment of bending roll force on the vibration of work roll is related with the bending roll force.

Free Transverse Vibration Analysis of an Underwater Launcher Based on Fluid-Structure Interaction

A pneumatic launcher is theoretically investigated to study its natural transverse vibration in water. Considering the mass effect of the sealing cover, the launcher is simplified as a uniform cantilever beam with a top point mass. By introducing the boundary and continuity conditions into the motion equation, the natural frequency equation and the mode shape function are derived. An iterative calculation method for added mass is also presented using the velocity potential function to account for the mass effect of the fluid on the launcher. The first 2 order natural frequencies and mode shapes are discussed in external flow fields and both external and internal flow fields. The results show good agreement with both natural frequencies and mode shapes between the theoretical analysis and the FEM studies. Also, the added mass is found to decrease with the increase of the mode shape orders of the launcher. And because of the larger added mass in both the external and internal flow fields than that in only the external flow field, the corresponding natural frequencies of the former are relatively smaller.

TRANSVERSE VIBRATION OF RECTANGULAR PLATES ELASTICALLY SUPPORTED AT POINTS ON EDGES

This paper studies transverse vibration of rectangular plates with two opposite edges simply supperted other two edges arbitrarily supported and free edges elaslically supported at points,A highly accurate solution is presented for calculating inherent frequencies and mode shape of rectangular platen elaslically supported at points. The number and location of these points on free edges may be completely arbitrary. This paper uses impulse function to represent reaction and moment at points. Fourter series is used to expand the impulse function along the edges. Characteristic equations satisfying all boundary conditions are given.Inherent frequencies and mode shape with any accutacy can be gained.