[Objective] The matter of chemical fertilizer being overused but organic fertilizer being deficiently used causes environment pollution and soil fertility degradation and holds back agricultural sustainable developmen...[Objective] The matter of chemical fertilizer being overused but organic fertilizer being deficiently used causes environment pollution and soil fertility degradation and holds back agricultural sustainable development in China at present.[Method] A survey of 200 farmers selected from Shandong province was conducted in 2008 to identify the factors influencing farmers willingness to use organic fertilizer.[Result] Logit model results showed that the proportion of non-farm income in total income,awareness of...展开更多
Since land and labor force are primary resources to be used and controlled by rural households, the allocation of labor forces will influence land uses, and further lead to land use conversion. The present study used ...Since land and labor force are primary resources to be used and controlled by rural households, the allocation of labor forces will influence land uses, and further lead to land use conversion. The present study used the Binary Logit model to investigate the influence of labor force transfer, characteristics of rural households, location, and land market on agricultural land use conversion at rural household level. This study was conducted based on 329 valid questionnaires, which were obtained in Changshu, Rudong, and Tongshan counties, respectively representing the southern, middle and northern areas of Jiangsu Province. The results showed that land market participation, location, zonal difference and labor transfer had strong influences on agricultural land use conversion. The participation of land market had a strong positive effect on land use conversion, especially for the farmland converted to the fishpond. The nearer to the county seat, the more conversion of land use occurred. Particularly, the labor force transfer caused by wage employment decreased this conversion probability, while the labor transfer caused by self-employment led to more conversion; and the increasing of income from labor transfer increased the conversion. Moreover, land use con- versions demonstrated zonal difference, which were more in Rudong and Changshu counties than in Tongshan County, and the factors influencing this conversion were different in the three regions.展开更多
Select link analysis provides information of where traffic comes from and goes to at selected links.This disaggregate information has wide applications in practice.The state-of-the-art planning software packages often...Select link analysis provides information of where traffic comes from and goes to at selected links.This disaggregate information has wide applications in practice.The state-of-the-art planning software packages often adopt the user equilibrium(UE) model for select link analysis.However,empirical studies have repeatedly revealed that the stochastic user equilibrium model more accurately predicts observed mean and variance of choices than the UE model.This paper proposes an alternative select link analysis method by making use of the recently developed logit–weibit hybrid model,to alleviate the drawbacks of both logit and weibit models while keeping a closed-form route choice probability expression.To enhance the applicability in large-scale networks,Bell’s stochastic loading method originally developed for logit model is adapted to the hybrid model.The features of the proposed method are twofold:(1) unique O–D-specific link flow pattern and more plausible behavioral realism attributed to the hybrid route choice model and(2) applicability in large-scale networks due to the link-based stochastic loading method.An illustrative network example and a case study in a large-scale network are conducted to demonstrate the efficiency and effectiveness of the proposed select link analysis method as well as applications of O–D-specific link flow information.A visualizationmethod is also proposed to enhance the understanding of O–D-specific link flow originally in the form of a matrix.展开更多
The need for travel demand models is growing worldwide. Obtaining reasonably accurate level of service (LOS) attributes of different travel modes such as travel time and cost representing the performance of transporta...The need for travel demand models is growing worldwide. Obtaining reasonably accurate level of service (LOS) attributes of different travel modes such as travel time and cost representing the performance of transportation system is not a trivial task, especially in growing cities of developing countries. This study investigates the sensitivity of results of a travel mode choice model to different specifications of network-based LOS attributes using a mixed logit model. The study also looks at the possibilities of correcting some of the inaccuracies in network-based LOS attributes. Further, the study also explores the effects of different specifications of LOS data on implied values of time and aggregation forecasting. The findings indicate that the implied values of time are very sensitive to specification of data and model implying that utmost care must be taken if the purpose of the model is to estimate values of time. Models estimated on all specifications of LOS-data perform well in prediction, likely suggesting that the extra expense on developing a more detailed and accurate network models so as to derive more precise LOS attributes is unnecessary for impact analyses of some policies.展开更多
For two-way contingency tables with ordered categories, the present paper gives a theorem that the independence model holds if and only if the logit uniform association model holds and equality of concordance and disc...For two-way contingency tables with ordered categories, the present paper gives a theorem that the independence model holds if and only if the logit uniform association model holds and equality of concordance and discordance for all pairs of adjacent rows and all dichotomous collapsing of the columns holds. Using the theorem, we analyze the cross-classification of duodenal ulcer patients according to operation and dumping severity.展开更多
In this paper, we explore the properties of a positive-part Stein-like estimator which is a stochastically weighted convex combination of a fully correlated parameter model estimator and uncorrelated parameter model e...In this paper, we explore the properties of a positive-part Stein-like estimator which is a stochastically weighted convex combination of a fully correlated parameter model estimator and uncorrelated parameter model estimator in the Random Parameters Logit (RPL) model. The results of our Monte Carlo experiments show that the positive-part Stein-like estimator provides smaller MSE than the pretest estimator in the fully correlated RPL model. Both of them outperform the fully correlated RPL model estimator and provide more accurate information on the share of population putting a positive or negative value on the alternative attributes than the fully correlated RPL model estimates. The Monte Carlo mean estimates of direct elasticity with pretest and positive-part Stein-like estimators are closer to the true value and have smaller standard errors than those with fully correlated RPL model estimator.展开更多
This paper introduces the theory of utility maximization ofNested Logit model,the establishment of selective limbs and its probability expressions;the basic calculation formula of time value. Investigate the travel ro...This paper introduces the theory of utility maximization ofNested Logit model,the establishment of selective limbs and its probability expressions;the basic calculation formula of time value. Investigate the travel routes and travel mode choices of residents from Suzhou to Shanghai,consider different impact variables in the survey,and divide their travel lines into two travel days on weekdays due to commuting to Shanghai, and free travel to Shanghai on weekdays.The data of the survey were analyzed and analyzed,and the parameters of the established Nested Logit model were calibrated by ST AT A software.The selection model and time value of the travel route and travel mode of residents under different scenarios and different influence variables were obtained Analyze.展开更多
By developing 7 logit models, this study attempts to identify the independent variables, which influence the risk of the Chinese high technology products output. The total sample comprises 184 enterprises surveyed in ...By developing 7 logit models, this study attempts to identify the independent variables, which influence the risk of the Chinese high technology products output. The total sample comprises 184 enterprises surveyed in Gangdong province, Beijing and Shanghai from June to September of 2002.The most statistically significant independent variables are found to be the R&D proportion, the enterprise kind, the enterprise scale, the product kind and exporters. The study suggests that the logit model should be effectively used by enterprises and governments to assess the risk of high technology products output.展开更多
Housing problem is the problem of livelihood. The problem of housing consumer behavior has become one of the main concern of the Government after more than 10 years the rapid development of real estate. This article i...Housing problem is the problem of livelihood. The problem of housing consumer behavior has become one of the main concern of the Government after more than 10 years the rapid development of real estate. This article is based on the logit model, integrated family net worth, family income, labor factors and so on. Results showed that housing in Shanghai have household net worth is the most critical, followed by labour income and labour force.展开更多
Purpose:The purpose of this study is to develop and compare model choice strategies in context of logistic regression.Model choice means the choice of the covariates to be included in the model.Design/methodology/appr...Purpose:The purpose of this study is to develop and compare model choice strategies in context of logistic regression.Model choice means the choice of the covariates to be included in the model.Design/methodology/approach:The study is based on Monte Carlo simulations.The methods are compared in terms of three measures of accuracy:specificity and two kinds of sensitivity.A loss function combining sensitivity and specificity is introduced and used for a final comparison.Findings:The choice of method depends on how much the users emphasize sensitivity against specificity.It also depends on the sample size.For a typical logistic regression setting with a moderate sample size and a small to moderate effect size,either BIC,BICc or Lasso seems to be optimal.Research limitations:Numerical simulations cannot cover the whole range of data-generating processes occurring with real-world data.Thus,more simulations are needed.Practical implications:Researchers can refer to these results if they believe that their data-generating process is somewhat similar to some of the scenarios presented in this paper.Alternatively,they could run their own simulations and calculate the loss function.Originality/value:This is a systematic comparison of model choice algorithms and heuristics in context of logistic regression.The distinction between two types of sensitivity and a comparison based on a loss function are methodological novelties.展开更多
文摘[Objective] The matter of chemical fertilizer being overused but organic fertilizer being deficiently used causes environment pollution and soil fertility degradation and holds back agricultural sustainable development in China at present.[Method] A survey of 200 farmers selected from Shandong province was conducted in 2008 to identify the factors influencing farmers willingness to use organic fertilizer.[Result] Logit model results showed that the proportion of non-farm income in total income,awareness of...
基金Under the auspices of National Natural Science Foundation of China (No. 40801063, 70373029)Jiangsu Provincial Society Foundation (No. 06EYB004)
文摘Since land and labor force are primary resources to be used and controlled by rural households, the allocation of labor forces will influence land uses, and further lead to land use conversion. The present study used the Binary Logit model to investigate the influence of labor force transfer, characteristics of rural households, location, and land market on agricultural land use conversion at rural household level. This study was conducted based on 329 valid questionnaires, which were obtained in Changshu, Rudong, and Tongshan counties, respectively representing the southern, middle and northern areas of Jiangsu Province. The results showed that land market participation, location, zonal difference and labor transfer had strong influences on agricultural land use conversion. The participation of land market had a strong positive effect on land use conversion, especially for the farmland converted to the fishpond. The nearer to the county seat, the more conversion of land use occurred. Particularly, the labor force transfer caused by wage employment decreased this conversion probability, while the labor transfer caused by self-employment led to more conversion; and the increasing of income from labor transfer increased the conversion. Moreover, land use con- versions demonstrated zonal difference, which were more in Rudong and Changshu counties than in Tongshan County, and the factors influencing this conversion were different in the three regions.
基金supported by National Natural Science Foundation of China(51408433)Fundamental Research Funds for the Central Universities of Chinathe Chenguang Program sponsored by Shanghai Education Development Foundation and Shanghai Municipal Education Commission
文摘Select link analysis provides information of where traffic comes from and goes to at selected links.This disaggregate information has wide applications in practice.The state-of-the-art planning software packages often adopt the user equilibrium(UE) model for select link analysis.However,empirical studies have repeatedly revealed that the stochastic user equilibrium model more accurately predicts observed mean and variance of choices than the UE model.This paper proposes an alternative select link analysis method by making use of the recently developed logit–weibit hybrid model,to alleviate the drawbacks of both logit and weibit models while keeping a closed-form route choice probability expression.To enhance the applicability in large-scale networks,Bell’s stochastic loading method originally developed for logit model is adapted to the hybrid model.The features of the proposed method are twofold:(1) unique O–D-specific link flow pattern and more plausible behavioral realism attributed to the hybrid route choice model and(2) applicability in large-scale networks due to the link-based stochastic loading method.An illustrative network example and a case study in a large-scale network are conducted to demonstrate the efficiency and effectiveness of the proposed select link analysis method as well as applications of O–D-specific link flow information.A visualizationmethod is also proposed to enhance the understanding of O–D-specific link flow originally in the form of a matrix.
文摘The need for travel demand models is growing worldwide. Obtaining reasonably accurate level of service (LOS) attributes of different travel modes such as travel time and cost representing the performance of transportation system is not a trivial task, especially in growing cities of developing countries. This study investigates the sensitivity of results of a travel mode choice model to different specifications of network-based LOS attributes using a mixed logit model. The study also looks at the possibilities of correcting some of the inaccuracies in network-based LOS attributes. Further, the study also explores the effects of different specifications of LOS data on implied values of time and aggregation forecasting. The findings indicate that the implied values of time are very sensitive to specification of data and model implying that utmost care must be taken if the purpose of the model is to estimate values of time. Models estimated on all specifications of LOS-data perform well in prediction, likely suggesting that the extra expense on developing a more detailed and accurate network models so as to derive more precise LOS attributes is unnecessary for impact analyses of some policies.
文摘For two-way contingency tables with ordered categories, the present paper gives a theorem that the independence model holds if and only if the logit uniform association model holds and equality of concordance and discordance for all pairs of adjacent rows and all dichotomous collapsing of the columns holds. Using the theorem, we analyze the cross-classification of duodenal ulcer patients according to operation and dumping severity.
文摘In this paper, we explore the properties of a positive-part Stein-like estimator which is a stochastically weighted convex combination of a fully correlated parameter model estimator and uncorrelated parameter model estimator in the Random Parameters Logit (RPL) model. The results of our Monte Carlo experiments show that the positive-part Stein-like estimator provides smaller MSE than the pretest estimator in the fully correlated RPL model. Both of them outperform the fully correlated RPL model estimator and provide more accurate information on the share of population putting a positive or negative value on the alternative attributes than the fully correlated RPL model estimates. The Monte Carlo mean estimates of direct elasticity with pretest and positive-part Stein-like estimators are closer to the true value and have smaller standard errors than those with fully correlated RPL model estimator.
基金the National Natural Science Foundation of China (71601110)the National Research and Development Program of China (2017YFC0804900).
文摘This paper introduces the theory of utility maximization ofNested Logit model,the establishment of selective limbs and its probability expressions;the basic calculation formula of time value. Investigate the travel routes and travel mode choices of residents from Suzhou to Shanghai,consider different impact variables in the survey,and divide their travel lines into two travel days on weekdays due to commuting to Shanghai, and free travel to Shanghai on weekdays.The data of the survey were analyzed and analyzed,and the parameters of the established Nested Logit model were calibrated by ST AT A software.The selection model and time value of the travel route and travel mode of residents under different scenarios and different influence variables were obtained Analyze.
文摘By developing 7 logit models, this study attempts to identify the independent variables, which influence the risk of the Chinese high technology products output. The total sample comprises 184 enterprises surveyed in Gangdong province, Beijing and Shanghai from June to September of 2002.The most statistically significant independent variables are found to be the R&D proportion, the enterprise kind, the enterprise scale, the product kind and exporters. The study suggests that the logit model should be effectively used by enterprises and governments to assess the risk of high technology products output.
文摘Housing problem is the problem of livelihood. The problem of housing consumer behavior has become one of the main concern of the Government after more than 10 years the rapid development of real estate. This article is based on the logit model, integrated family net worth, family income, labor factors and so on. Results showed that housing in Shanghai have household net worth is the most critical, followed by labour income and labour force.
文摘Purpose:The purpose of this study is to develop and compare model choice strategies in context of logistic regression.Model choice means the choice of the covariates to be included in the model.Design/methodology/approach:The study is based on Monte Carlo simulations.The methods are compared in terms of three measures of accuracy:specificity and two kinds of sensitivity.A loss function combining sensitivity and specificity is introduced and used for a final comparison.Findings:The choice of method depends on how much the users emphasize sensitivity against specificity.It also depends on the sample size.For a typical logistic regression setting with a moderate sample size and a small to moderate effect size,either BIC,BICc or Lasso seems to be optimal.Research limitations:Numerical simulations cannot cover the whole range of data-generating processes occurring with real-world data.Thus,more simulations are needed.Practical implications:Researchers can refer to these results if they believe that their data-generating process is somewhat similar to some of the scenarios presented in this paper.Alternatively,they could run their own simulations and calculate the loss function.Originality/value:This is a systematic comparison of model choice algorithms and heuristics in context of logistic regression.The distinction between two types of sensitivity and a comparison based on a loss function are methodological novelties.