Numerical simulations of stress wave propagation and attenuation at arc-shaped interface inlayered SiC/Al composite

The effects of interface shape on stress wave distribution and attenuation were investiga- ted using finite element method （ FEM ）. The simulation results indicate that when the stress wave propagates from SiC ceramic to A1 alloy, the tensile stress decreases and the attenuation coefficient of the stress wave increases with increasing central angle of the concave interface between SiC and A1. But for the convex interface, the tensile stress increases and attenuation coefficient decreases with increasing central angle. As the stress wave propagates from A1 alloy to SiC ceramic, the atten- uation coefficient of stress wave decreases with increasing the central angle of the concave interface. For the convex interface, the attenuation coefficient increases with increasing central angle.

Efficiency-loss analysis of monolithic perovskite/silicon tandem solar cells by identifying the patterns of a dual two-diode model’s current-voltage curves

In this work,we developed a simple and direct circuit model with a dual two-diode model that can be solved by a SPICE numerical simulation to comprehensively describe the monolithic perovskite/crystalline silicon(PVS/c-Si)tandem solar cells.We are able to reveal the effects of different efficiency-loss mechanisms based on the illuminated current density-voltage(J-V),semi-log dark J-V,and local ideality factor(m-V)curves.The effects of the individual efficiency-loss mechanism on the tandem cell’s efficiency are discussed,including the exp(V/VT)and exp(V/2VT)recombination,the whole cell’s and subcell’s shunts,and the Ohmic-contact or Schottky-contact of the intermediate junction.We can also fit a practical J-V curve and find a specific group of parameters by the trial-and-error method.Although the fitted parameters are not a unique solution,they are valuable clues for identifying the efficiency loss with the aid of the cell’s structure and experimental processes.This method can also serve as an open platform for analyzing other tandem solar cells by substituting the corresponding circuit models.In summary,we developed a simple and effective methodology to diagnose the efficiency-loss source of a monolithic PVS/c-Si tandem cell,which is helpful to researchers who wish to adopt the proper approaches to improve their solar cells.

Numerical simulation of isothermal chemical vapor infiltration process in fabrication of carbon-carbon composites by finite element method

The chemical vapor infiltration process in fabrication of carbon-carbon composites is highly inefficient and requires long processing time. These limitations add considerably to the cost of fabrication and restrict the application of this material. Efforts have been made to study the CVI process in fabrication of carbon-carbon composites by computer simulation and predict the process parameters, density, porosity, etc. According to the characteristics of CVI process, the basis principle of FEM and mass transport, the finite element model has been established. Incremental finite element equations and the elemental stiffness matrices have been derived for the first time. The finite element program developed by the authors has been used to simulate the ICVI process in fabrication of carbon-carbon composites. Computer color display of simulated results can express the densification and distributions of density and porosity in preform clearly. The influence of process parameters on the densification of preform has been analyzed. The numerically simulated and experimental results give a good agreement.

Performance improvement of blue InGaN light-emitting diodes with a specially designed n-AlGaN hole blocking layer

Blue InGaN light-emitting diodes （LEDs） with a conventional electron blocking layer （EBL）, a common n-A1GaN hole blocking layer （HBL）, and an n-A1GaN HBL with gradual A1 composition are investigated numerically, which involves analyses of the carrier concentration in the active region, energy band diagram, electrostatic field, and internal quantum efficiency （IQE）. The results indicate that LEDs with an n-AIGaN HBL with gradual AI composition exhibit better hole injection efficiency, lower electron leakage, and a smaller electrostatic field in the active region than LEDs with a conven tional p-A1GaN EBL or a common n-A1GaN HBL. Meanwhile, the efficiency droop is alleviated when an n-A1GaN HBL with gradual A1 composition is used.

Reduced-order proper orthogonal decomposition extrapolating finite volume element format for two-dimensional hyperbolic equations

This paper is concerned with establishing a reduced-order extrapolating fi- nite volume element （FVE） format based on proper orthogonal decomposition （POD） for two-dimensional （2D） hyperbolic equations. For this purpose, a semi discrete variational format relative time and a fully discrete FVE format for the 2D hyperbolic equations are built, and a set of snapshots from the very few FVE solutions are extracted on the first very short time interval. Then, the POD basis from the snapshots is formulated, and the reduced-order POD extrapolating FVE format containing very few degrees of freedom but holding sufficiently high accuracy is built. Next, the error estimates of the reduced-order solutions and the algorithm procedure for solving the reduced-order for- mat are furnished. Finally, a numerical example is shown to confirm the correctness of theoretical conclusions. This means that the format is efficient and feasible to solve the 2D hyperbolic equations.

Single-pulse chaotic dynamics of functionally graded materials plate

Single-pulse chaos are studied for a functionally graded materials rectangular plate. By means of the global perturbation method, explicit conditions for the existence of a SiZnikov-type homoclinic orbit are obtained for this sys- tem, which suggests that chaos are likely to take place. Then, numerical simulations are given to test the analytical predic- tions. And from our analysis, when the chaotic motion oc- curs, there are a quasi-period motion in a two-dimensional subspace and chaos in another two-dimensional supplemen- tary subspace.

Flow Instability of a Centrifugal Pump Determined Using the Energy Gradient Method

The stability of the centrifugal pump has not been well revealed because of the complexity of internal flow. To analyze the flow characteristics of a centrifugal pump operating at low capacity, methods of numerical simulation and experimental research were adopted in this paper. Characteristics of the inner flow were obtained. Standard k-s turbulence models were used to calculate the inner flow of the pump under off-design conditions. The distri- bution of the energy gradient function K was obtained by three-dimensional numerical simulation at different flow rates. The relative velocity component was acquired from the absolute velocity obtained in particle image velocimetry. By comparing with experimental results, it was found that flow instability occurs at the position of maximum K. The flow stability reduces with an increasing flow rate. The research results provide a theoretical basis for the optimization design of a centrifugal pump.

Research Progress in China on the Tropical Atmospheric Intraseasonal Oscillation

Tropical intraseasonal oscillation （including the Madden-Julian oscillation） is an important element of the atmospheric circulation system. The activities and anomalies of tropical intraseasonal oscillations affect weather and climate both inside and outside the tropical region. The study of these phenomena therefore represents one of the frontiers of atmospheric sciences. This review aims to synthesize and summarize studies of intraseasonal oscillation （ISO） by Chinese scientists within the last 5-10 years. We focus particularly on ISO＇s mechanisms, its numerical simulations （especially the impacts of diabatic heating profiles）, relation- ships and interactions with ENSO （especially over the western Pacific）, impacts on tropical cyclone genesis and tracks over the northwestern Pacific, and influences on the onset and activity of the South and East Asian monsoons （especially rainfall over China）. Among these, focuses of ongoing research and unresolved issues related to ISO are also discussed.