The effect of alumina nanoparticle addition on the microstructure and tribological properties of a CuCrW alloy was investigated in this work. Mechanical alloying was carried out in a satellite ball mill. The tribologi...The effect of alumina nanoparticle addition on the microstructure and tribological properties of a CuCrW alloy was investigated in this work. Mechanical alloying was carried out in a satellite ball mill. The tribological properties of the samples were evaluated using pin-on-disk wear tests with different pins(alumina, tungsten carbide, and steel pins). The results indicated that the tungsten carbide pin had a lower coefficient of friction than the alumina and steel pins because of its high hardness and low surface roughness. In addition, when the sliding rate was decreased, the weight-loss rate increased. The existence of alumina nanoparticles in the nanocomposite led to a lower weight-loss rate and to a change in the wear mechanism from adhesive to abrasive.展开更多
Transition metal di-chalcogenides MX2 (X= S, Se, Te; and M = W, Mo, Nb, Ta) are one kind of solid lubricant materials that have been widely used in industry. The lubricant properties of such lubricant coatings are d...Transition metal di-chalcogenides MX2 (X= S, Se, Te; and M = W, Mo, Nb, Ta) are one kind of solid lubricant materials that have been widely used in industry. The lubricant properties of such lubricant coatings are dependent not only on microstructure, orientation, morphology, and composition of the coatings, but also on the substrate, the interface between substrate and lubricant coatings, and the specific application environment. In this review, the effects of parameters on tribological properties of such kind of lubricant coatings were summarized. By comparing advantages and disadvantages of those coatings, the special treatments such as doping, structural modulation and post-treatment were suggested, aiming to improve the tribologicai performance under severe test conditions (e.g. high temperature, oxidizing atmosphere or humid condition).展开更多
文摘The effect of alumina nanoparticle addition on the microstructure and tribological properties of a CuCrW alloy was investigated in this work. Mechanical alloying was carried out in a satellite ball mill. The tribological properties of the samples were evaluated using pin-on-disk wear tests with different pins(alumina, tungsten carbide, and steel pins). The results indicated that the tungsten carbide pin had a lower coefficient of friction than the alumina and steel pins because of its high hardness and low surface roughness. In addition, when the sliding rate was decreased, the weight-loss rate increased. The existence of alumina nanoparticles in the nanocomposite led to a lower weight-loss rate and to a change in the wear mechanism from adhesive to abrasive.
文摘Transition metal di-chalcogenides MX2 (X= S, Se, Te; and M = W, Mo, Nb, Ta) are one kind of solid lubricant materials that have been widely used in industry. The lubricant properties of such lubricant coatings are dependent not only on microstructure, orientation, morphology, and composition of the coatings, but also on the substrate, the interface between substrate and lubricant coatings, and the specific application environment. In this review, the effects of parameters on tribological properties of such kind of lubricant coatings were summarized. By comparing advantages and disadvantages of those coatings, the special treatments such as doping, structural modulation and post-treatment were suggested, aiming to improve the tribologicai performance under severe test conditions (e.g. high temperature, oxidizing atmosphere or humid condition).