Tribological Properties of Lubricating Oils with Triethanolamine Borate under Electromagnetic Field

Tribological properties of 150SN mineral oil and lubricating oils containing triethanolamine borate(TBE)with and without electromagnetic field impact were evaluated on a modified four-ball tribo-tester.The characteristics of the worn surfaces were studied by scanning electronic microscopy(SEM),energy dispersive spectrometry(EDS)and X-ray photoelectron spectroscopy(XPS).Moreover,the tribological mechanisms are discussed from the viewpoint of physical effect and chemical effect.The results indicated that the friction coefficients and wear scar diameters(WSDs)lubricated by 150SN mineral oil under electromagnetic field were higher than those without electromagnetism impact.The WSDs of steel balls lubricated by TBE-doped oils under electromagnetic field were smaller than those obtained from non-electromagnetic field,but the friction coefficients were higher than those under non-electromagnetic field.A protective coating consists of wear particles could be formed on the frictional surface due to the physical effect of electromagnetic field on wear debris.The electromagnetic field could facilitate the interaction of elemental boron and nitrogen in TBE with metal interfaces,and contributes to forming tribo-chemical reaction film to reduce friction and wear.

Characteristics and Mechanism of Modified Triethanolamine as Cement Grinding Aids

Effects of modified triethanolamine as cement grinding aids on particles characteristics and mechanical property of cement were studied, and its reaction mechanism was analyzed by IR, Zeta potential, SEM, XRD and TG-DTA. The results show that the content of 3-32 μm particles for cement with 0.015% modified triethanolamine（M-TEA） is increased by 12.4%, and the compressive strengths of cement with 0.03% M-TEA are increased by 5.5 and 8.2 MPa at 3 and 28 days, respectively. And both the grinding and enhancement effects of M-TEA on cement are better than triethanolamine. The mechanism analysis shows that M-TEA not only has the amino and hydroxyl groups of TEA, but also has the ester, carbonyl, carboxyl groups which easily combine with metal ions of cement minerals, resulting in that M-TEA can promote surface adsorption and shield the unsaturated charges in the surface and crack section of particles, thus particles reunion is prevented and grinding efficiency is improved. Enhancement of M-TEA on cement mainly lies in that it can promote or induce hydration reaction of cement mineral with gypsum and water, which accelerates formation of hydration products, and then improves the structure and morphology of cement hydration products, thus the uniformity and compactness of product structure is increased.

化妆品中乙醇胺类的GC-MS分析

Gas chromatography-mass spectrometry (GC-MS) method has been developed for the simultaneous determination of monoethanolamine,diethanolamine,triethanolamine in cosmetics.The detected materials were extracted with ethanol by ultrasonic, then were analyzed by GC-FID and GC-MSD.The relative standard deviations (RSD) were 0.76%-3.43%,and recoveries were 85.8%-106.0%. The limit of detection was 0.05%.

Cationized Melamine-formaldehyde Resin for Improving the Wet Strength of Paper

In this work, melamine-formaldehyde resin was cationized by adding modifiers so that the fibers closely bonded to improve their usability and the wet strength of paper was greatly improved. Triethanolamine and dimethylamine were added to modify the melamine-formaldehyde resin,respectively.The mechanism of the cationized resin was explored and the possible chemical reactions were deduced. It was concluded that,with the use of triethanolamine,the most optimum product was obtained by hydroxymethylation for 30 min with a temperature of 85℃ and p H of 9. 0 where n( melamine) ∶ n( formaldehyde) ∶ n( methanol) ∶ n( triethanolamine) was 100 ∶ 330 ∶ 450 ∶ 15. With the combined use of dimethylamine and methanol,the optimal product was acquired by condensation for 30 min at a temperature of 50℃ and p H of 2. 0 at melamine, formaldehyde, methanol, and dimethylamine molar ratio of100∶ 330∶ 350∶ 20. With the only use of dimethylamine,the optimal product was obtained by condensation at melamine,formaldehyde,dimethylamine molar ratio of 100∶ 330∶ 10. The wet tensile strength of fruit-bagging paper was improved by adding cationized melamine-formaldehyde resin. The zeta potential,charge density,and conductivity of the melamine-formaldehyde resin were also studied.

Synthesis, characterization and catalytic properties of mesoporous MCM-48 containing zeolite secondary building units

Mesoporous aluminosilicate MCM-48 containing zeolite secondary building units in the pore wall has been synthesized in alkaline media with a two-step procedure.The aluminosilicate precursors comprising zeolite secondary building units were first synthesized by carefully controlling reaction conditions and then were assembled using co-templates of gemini surfactant[C18H37N(CH3)2(CH2)3-N(CH3)2C18H37]2+(18-3-18)and triethanolamine(TEA).X-ray Diffraction(XRD)patterns of the as-made samples indicated that highly ordered mesostructured MCM-48 was formed.Transmission Electron Microscopy(TEM)images further verified the formation of MCM-48 with uniform cubic pore channel system having the pore opening diameter of about 25Å.Compared with the conventionally synthesized MCM-48,the as-synthesized MCM-48 sample showed an adsorption band at 520–600 cm-1 in its FT-IR spectrum,which was assigned to five-membered ring vibration from zeolite structure.This suggested the presence of zeolite building units in the pore wall.N2 adsorption data showed that the material had a much higher specific surface area(1200 m2/g)than the conventional MCM-48(1100 m2/g).Finally,the cat-alytic performance of the as-made MCM-48 was evaluated by hydrogenation dealkylation reaction of heavy aromatic hydrocarbons.Catalytic results showed that the as-made MCM-48 catalyst exhibited higher conversion than the con-ventional MCM-48 catalyst.The as-made mesostructured MCM-48 may have a potential catalytic application in the conversion of bulky molecules.