In semi-solid forming process, preparing the slurry with rosette or globular microstructure is very important. A new approach named the damper cooling tube method （DCT）, to produce the semi-solid metal slurry, has b...In semi-solid forming process, preparing the slurry with rosette or globular microstructure is very important. A new approach named the damper cooling tube method （DCT）, to produce the semi-solid metal slurry, has been introduced. To optimize the technical parameters in designing the apparatus, the finite volume method was adopted to simulate the flow process. The temperature effects on the rheological properties of the slurries were also considered. The effects of the technical parameters on the slurry properties were studied in detail.展开更多
A loose coupling method is used to solve the electromagnetic tube bulging. ANSYS/ EMAG is used to model the time varying electromagnetic field with the discharge current used as excitation, in order to obtain the radi...A loose coupling method is used to solve the electromagnetic tube bulging. ANSYS/ EMAG is used to model the time varying electromagnetic field with the discharge current used as excitation, in order to obtain the radial and axial magnetic pressure acting on the tube, the magnetic pressure is then used as boundary conditions to model the high velocity deformation of tube with DYNAFORM, The radial magnetic pressure on the tube decreases from the center to the tube end, axial magnetic pressure is greater near the location equal to the coil height and slight in the other region. The radial displacement of deformed workpicces is distributed uniformly near the tube center and decreases from the center to the end; Deformation from the location equal to coil height to the tube end is little. This distribution is consistent with the distribution of radial pressure; Effect of the axial magnetic pressure on deformation can be ignored, The calculated results show well agreements with the experimental results.展开更多
We have been using the method of tube-arrest as a means of producing transient single cavitation bubble. In the present paper we seek to comprehend the mechanism of production and inquire into the structure of the ab ...We have been using the method of tube-arrest as a means of producing transient single cavitation bubble. In the present paper we seek to comprehend the mechanism of production and inquire into the structure of the ab initio pressure field in the arrested liquid column. The generated pressure wave is shown by combining the theoretical analysis with the experimental observation to be a slightly varied version of water hammer. With relatively clean liquid, the magnitude of the tension peak generating the TSB is likely to reach of several millions Pa. It is also shown that the so generated cavitation bubble originating from the gas-containing bulk liquid is in ‘violent’ motion.展开更多
An example of using ultrasonic method to detect the compactness of complicated concrete-filled steel tube in certain high-rise building was discussed in this study.Because of the particularity of the complicated concr...An example of using ultrasonic method to detect the compactness of complicated concrete-filled steel tube in certain high-rise building was discussed in this study.Because of the particularity of the complicated concrete-filled steel tubular column,the plane detection method and embedded sounding pipe method were adopted in the process of effectively detecting the column.According to the results of the plane detection method and embedded sounding pipe method,the cementing status of steel tube and concrete can be concluded,which cannot be judged by the hammering method in the rectangular steel tube-reinforced concrete.展开更多
Using commercial amorphous B powder (92% in purity) and Mg powder (99% in purity) as starting materials, 19-filament Fe/Cu clad MgB2 wires were fabricated by an in situ powder-in-tube method. Heat treatment was perfor...Using commercial amorphous B powder (92% in purity) and Mg powder (99% in purity) as starting materials, 19-filament Fe/Cu clad MgB2 wires were fabricated by an in situ powder-in-tube method. Heat treatment was performed at 700℃ for 1 h under an argon gas atmosphere. The influence of Mg/B ratio on the microstructure and superconducting properties of the wires was investigated. It was found that the major phases of MgB2 wires were MgB2 accompanied with relatively small amounts of MgO and Fe2B impurities. With 5% excess Mg addition, the onset TC slightly decreased. However, the transport JC at 4.2 K and 4 T reached 1.07×104 A·cm-2, increasing by a factor of 1.4 compared to the stoichiometric sample. Moreover, the Mg1.05B2 sample showed an improved field dependence of JC, suggesting that less voids and smaller grain size of the Mg1.05B2 core lead to better grain connectivity and stronger flux pinning.展开更多
In this paper, A method, consisted of perturbation method, Garlerkin method and finite-difference method, is designed to calculate fully developed flows in curved tubes of rectangular cross-section. It costs less comp...In this paper, A method, consisted of perturbation method, Garlerkin method and finite-difference method, is designed to calculate fully developed flows in curved tubes of rectangular cross-section. It costs less computation than that of direct solving N-S equations, and prevents from building high-order difference equations and extra dealing with the boundary conditions. Numerical results in the situation of small curvature and low Dean number is in accordance with former's numerical and experimental results in quality, and it shows the feasibility of this paper's method.展开更多
A numerical method capable is developed for handling steady laminar flow and heat trans-fer of a highly viscous power-law fluid whose density,viscosity,specific heat and thermalconductivity,vary with temperature.The g...A numerical method capable is developed for handling steady laminar flow and heat trans-fer of a highly viscous power-law fluid whose density,viscosity,specific heat and thermalconductivity,vary with temperature.The governing equations are found to be continuity,monmentumand energy expressions.Important effects such as varying viscosity,natural convection and viscousdissipation are incorporated in the theoretical model.These equations are being attracted by employing a decoupled finite element method.Galerkin’sprinciple is used to handle the momentum and continuity equations.Consistent(SU/PG)andnon-consistent(SU)streamline upwind methods are employed for the energy equation.Comparisonof calculated results and experimental data shows good agreement.Similar results are obtained withSU and SU/PG methods.Velocity and temperature profiles which provide insights into the processare also given.展开更多
Highly ordered nanowire/tube arrays of Ni0.5Zn0.5Fe2O4were fabricated by the sol-gel method in the pores of anodic alumina membrane （AAM）. Whether nanowires or nanotubes were fabricated depends on immersion time. Th...Highly ordered nanowire/tube arrays of Ni0.5Zn0.5Fe2O4were fabricated by the sol-gel method in the pores of anodic alumina membrane （AAM）. Whether nanowires or nanotubes were fabricated depends on immersion time. The immersion time was 15- 40 s for nanotubes and over 60 s for nanowires. The topography and crystalline structure of the nanowire arrays were characterized by scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, and X-ray diffraction （XRD）. It was found that the length and diameter of the Ni0.5Zn0.5Fe2O4 nanowires are related to the thickness of the AAM and the diameter of the pores. The results indicated that the Ni0.5Zn0.5Fe2O4 nanowires are uniform and parallel to each other.展开更多
In this paper, the boundary element method is applied to investigate the internal state of stress of autofretted tube with notch and the calculated results are important in the practical design.
Springback is one of important factors influencing the forming quality of numerical control （NC） bending of thin-walled tube. In this paper, a numerical-analytic method for springback angle prediction of the process...Springback is one of important factors influencing the forming quality of numerical control （NC） bending of thin-walled tube. In this paper, a numerical-analytic method for springback angle prediction of the process was put forward. The method is based on springback angle model derived using analytic method and simulation results from three-dimensional （3D） rigid-plastic finite element method （FEM）. The method is validated through comparison with experimental results. The features of the method are as follows： （1） The method is high in efficiency because it combines advantages of rigid-plastic FEM and analytic method. （2） The method is satisfactory in accuracy, since the field variables used in the model is resulting from 3D rigid-plastic FEM solution, and the effects both of axial force and strain neutral axis shift have been included. （3） Research on multi-factor effects can be carried out using the method due to its advantage inheriting from rigid-plastic FEM. The method described here is also of general significance to other bending processes.展开更多
Based on the characteristics of an L-shaped column composed of concrete-filled square steel tubes, the axial compression experiment and nonlinear finite element analysis were carried out to study the mechanical proper...Based on the characteristics of an L-shaped column composed of concrete-filled square steel tubes, the axial compression experiment and nonlinear finite element analysis were carried out to study the mechanical property of the L-shaped column. The load-displacement curve for the L-shaped column, the deflection and load-strain curves for the mono columns were obtained by the axial compression experiment. The results show that the L-shaped column exhibits a flexural-torsional buckling failure mode. The numerical simulation by the finite element analysis shows that the bearing capacity and failure mode are in accordance with those of the axial compression experiment and the feasi- bility of the finite element analysis is proved. For the calculation of the bearing capacity of the L-shaped column com- posed of concrete-filled square steel tubes, an analytical method is proposed based on the theory of the elastic stability and spatial truss model. The results of the analytical method are in good agreement with those of the axial compression experiment and the finite element analysis.展开更多
The aim of this study is to examine unsteady incompressible Magnetohydrodynamic fluid flow together with soret and dufour effects on mass and heat transfer through a collapsible elastic tube. The governing equations a...The aim of this study is to examine unsteady incompressible Magnetohydrodynamic fluid flow together with soret and dufour effects on mass and heat transfer through a collapsible elastic tube. The governing equations are continuity equation, momentum equation, energy equation and concentration equation. The velocity, temperature and concentration profiles together with heat and mass transfer rate were determined. The system of nonlinear partial differential equations governing the flow solved numerically by applying collocation method and implemented in MATLAB. The numerical solution of the profiles displayed both by graphically and numerically for different values of the physical parameters entering into the problem. The effects of varying various parameters such as Reynolds number, Hartmann number, Soret number, Dufour number and Prandtl number on velocity, temperature and concentration profiles also the rate of heat and mass transfer are discussed. The study is significant because heat and mass transfer mechanisms with the soret and dufour effects considerations play an important role due to its wide range of application including but not limited to medical fields, biological sciences and other physical sciences where collapsible tubes are applied.展开更多
Kanamycin was used to screen To seeds of the variety Dongnong 46 transformed by means of pollen-tube method. The results showed that 400 mg·L^-1 kanamycin could inhibit growth of non-transgenic plants, and 2 posi...Kanamycin was used to screen To seeds of the variety Dongnong 46 transformed by means of pollen-tube method. The results showed that 400 mg·L^-1 kanamycin could inhibit growth of non-transgenic plants, and 2 positive plants were gotten combined with Gus dyeing and PCR detection. It is proved that this method is economic and effective in preliminary screening the transgenic plants.展开更多
基金This work was financially supported by the National Natural Science Foundation of China (No.50374014).
文摘In semi-solid forming process, preparing the slurry with rosette or globular microstructure is very important. A new approach named the damper cooling tube method （DCT）, to produce the semi-solid metal slurry, has been introduced. To optimize the technical parameters in designing the apparatus, the finite volume method was adopted to simulate the flow process. The temperature effects on the rheological properties of the slurries were also considered. The effects of the technical parameters on the slurry properties were studied in detail.
文摘A loose coupling method is used to solve the electromagnetic tube bulging. ANSYS/ EMAG is used to model the time varying electromagnetic field with the discharge current used as excitation, in order to obtain the radial and axial magnetic pressure acting on the tube, the magnetic pressure is then used as boundary conditions to model the high velocity deformation of tube with DYNAFORM, The radial magnetic pressure on the tube decreases from the center to the tube end, axial magnetic pressure is greater near the location equal to the coil height and slight in the other region. The radial displacement of deformed workpicces is distributed uniformly near the tube center and decreases from the center to the end; Deformation from the location equal to coil height to the tube end is little. This distribution is consistent with the distribution of radial pressure; Effect of the axial magnetic pressure on deformation can be ignored, The calculated results show well agreements with the experimental results.
基金supported by the National Natural Science Foundation of China (Grant No 10434070)
文摘We have been using the method of tube-arrest as a means of producing transient single cavitation bubble. In the present paper we seek to comprehend the mechanism of production and inquire into the structure of the ab initio pressure field in the arrested liquid column. The generated pressure wave is shown by combining the theoretical analysis with the experimental observation to be a slightly varied version of water hammer. With relatively clean liquid, the magnitude of the tension peak generating the TSB is likely to reach of several millions Pa. It is also shown that the so generated cavitation bubble originating from the gas-containing bulk liquid is in ‘violent’ motion.
文摘An example of using ultrasonic method to detect the compactness of complicated concrete-filled steel tube in certain high-rise building was discussed in this study.Because of the particularity of the complicated concrete-filled steel tubular column,the plane detection method and embedded sounding pipe method were adopted in the process of effectively detecting the column.According to the results of the plane detection method and embedded sounding pipe method,the cementing status of steel tube and concrete can be concluded,which cannot be judged by the hammering method in the rectangular steel tube-reinforced concrete.
基金the Beijing Municipal Science and Technology Commission (Grant No. Z07000300703)the State Key Development Program for Basic Research of China (Grant No. 2006CB601004)the National High Technology Research and Development Program for Advanced Materials of China (Grant No. 2006AA03Z203)
文摘Using commercial amorphous B powder (92% in purity) and Mg powder (99% in purity) as starting materials, 19-filament Fe/Cu clad MgB2 wires were fabricated by an in situ powder-in-tube method. Heat treatment was performed at 700℃ for 1 h under an argon gas atmosphere. The influence of Mg/B ratio on the microstructure and superconducting properties of the wires was investigated. It was found that the major phases of MgB2 wires were MgB2 accompanied with relatively small amounts of MgO and Fe2B impurities. With 5% excess Mg addition, the onset TC slightly decreased. However, the transport JC at 4.2 K and 4 T reached 1.07×104 A·cm-2, increasing by a factor of 1.4 compared to the stoichiometric sample. Moreover, the Mg1.05B2 sample showed an improved field dependence of JC, suggesting that less voids and smaller grain size of the Mg1.05B2 core lead to better grain connectivity and stronger flux pinning.
文摘In this paper, A method, consisted of perturbation method, Garlerkin method and finite-difference method, is designed to calculate fully developed flows in curved tubes of rectangular cross-section. It costs less computation than that of direct solving N-S equations, and prevents from building high-order difference equations and extra dealing with the boundary conditions. Numerical results in the situation of small curvature and low Dean number is in accordance with former's numerical and experimental results in quality, and it shows the feasibility of this paper's method.
文摘A numerical method capable is developed for handling steady laminar flow and heat trans-fer of a highly viscous power-law fluid whose density,viscosity,specific heat and thermalconductivity,vary with temperature.The governing equations are found to be continuity,monmentumand energy expressions.Important effects such as varying viscosity,natural convection and viscousdissipation are incorporated in the theoretical model.These equations are being attracted by employing a decoupled finite element method.Galerkin’sprinciple is used to handle the momentum and continuity equations.Consistent(SU/PG)andnon-consistent(SU)streamline upwind methods are employed for the energy equation.Comparisonof calculated results and experimental data shows good agreement.Similar results are obtained withSU and SU/PG methods.Velocity and temperature profiles which provide insights into the processare also given.
文摘Highly ordered nanowire/tube arrays of Ni0.5Zn0.5Fe2O4were fabricated by the sol-gel method in the pores of anodic alumina membrane （AAM）. Whether nanowires or nanotubes were fabricated depends on immersion time. The immersion time was 15- 40 s for nanotubes and over 60 s for nanowires. The topography and crystalline structure of the nanowire arrays were characterized by scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, and X-ray diffraction （XRD）. It was found that the length and diameter of the Ni0.5Zn0.5Fe2O4 nanowires are related to the thickness of the AAM and the diameter of the pores. The results indicated that the Ni0.5Zn0.5Fe2O4 nanowires are uniform and parallel to each other.
文摘In this paper, the boundary element method is applied to investigate the internal state of stress of autofretted tube with notch and the calculated results are important in the practical design.
基金This work was supported by the National Natural Science Foundation of China for Distinguished Young Scholars （Grant No. 50225518）the Teaching and Research Award Program for 0utstanding Young Teachers in Higher Education Institution of M0E, PRCthe Aeronautical Science Foundation of China （Grant No. 04H53057）.
文摘Springback is one of important factors influencing the forming quality of numerical control （NC） bending of thin-walled tube. In this paper, a numerical-analytic method for springback angle prediction of the process was put forward. The method is based on springback angle model derived using analytic method and simulation results from three-dimensional （3D） rigid-plastic finite element method （FEM）. The method is validated through comparison with experimental results. The features of the method are as follows： （1） The method is high in efficiency because it combines advantages of rigid-plastic FEM and analytic method. （2） The method is satisfactory in accuracy, since the field variables used in the model is resulting from 3D rigid-plastic FEM solution, and the effects both of axial force and strain neutral axis shift have been included. （3） Research on multi-factor effects can be carried out using the method due to its advantage inheriting from rigid-plastic FEM. The method described here is also of general significance to other bending processes.
基金Foundation of Key Laboratory of Coast Civil Structure Safety (Tianjin University),Ministry of EducationChinese Program for New Century Excellent Talents in University+1 种基金Seed Foundation of Tianjin UniversitySeed Foundation of Xinjiang University
文摘Based on the characteristics of an L-shaped column composed of concrete-filled square steel tubes, the axial compression experiment and nonlinear finite element analysis were carried out to study the mechanical property of the L-shaped column. The load-displacement curve for the L-shaped column, the deflection and load-strain curves for the mono columns were obtained by the axial compression experiment. The results show that the L-shaped column exhibits a flexural-torsional buckling failure mode. The numerical simulation by the finite element analysis shows that the bearing capacity and failure mode are in accordance with those of the axial compression experiment and the feasi- bility of the finite element analysis is proved. For the calculation of the bearing capacity of the L-shaped column com- posed of concrete-filled square steel tubes, an analytical method is proposed based on the theory of the elastic stability and spatial truss model. The results of the analytical method are in good agreement with those of the axial compression experiment and the finite element analysis.
文摘The aim of this study is to examine unsteady incompressible Magnetohydrodynamic fluid flow together with soret and dufour effects on mass and heat transfer through a collapsible elastic tube. The governing equations are continuity equation, momentum equation, energy equation and concentration equation. The velocity, temperature and concentration profiles together with heat and mass transfer rate were determined. The system of nonlinear partial differential equations governing the flow solved numerically by applying collocation method and implemented in MATLAB. The numerical solution of the profiles displayed both by graphically and numerically for different values of the physical parameters entering into the problem. The effects of varying various parameters such as Reynolds number, Hartmann number, Soret number, Dufour number and Prandtl number on velocity, temperature and concentration profiles also the rate of heat and mass transfer are discussed. The study is significant because heat and mass transfer mechanisms with the soret and dufour effects considerations play an important role due to its wide range of application including but not limited to medical fields, biological sciences and other physical sciences where collapsible tubes are applied.
文摘Kanamycin was used to screen To seeds of the variety Dongnong 46 transformed by means of pollen-tube method. The results showed that 400 mg·L^-1 kanamycin could inhibit growth of non-transgenic plants, and 2 positive plants were gotten combined with Gus dyeing and PCR detection. It is proved that this method is economic and effective in preliminary screening the transgenic plants.
