Induced BVOC emissions from pyrolyzed plants that may accumulate in confined topographies have been a controversy for their role in wildfire eruptions or flashovers. α-pinene (C<sub>10</sub>H<sub>16...Induced BVOC emissions from pyrolyzed plants that may accumulate in confined topographies have been a controversy for their role in wildfire eruptions or flashovers. α-pinene (C<sub>10</sub>H<sub>16</sub>) is one of the most abundant monoterpenes emitted from pyrolyzed Mediterranean vegetation in wildfires. Its thermal degradation under fire thermal stresses produces a range of highly flammable gases. In order to identify these products, thermal degradation experiments were performed on α-pinene in a tubular furnace in an inert atmosphere and a high-temperature range (300°C - 900°C). The pyrolysis products were identified using gas chromatography (GC) linked to a tubular furnace outlet by which their retention times were compared with those of reference standards. The degradation products were mainly terpenoids, aliphatic hydrocarbons (methane, ethane, ethene, propane, propene, 1,3-butadiene, isoprene), and aromatics (benzene, toluene) in addition to hydrogen. The radical mechanisms of the chemical reactions associated with the formation of the products at different experimental temperatures were addressed and compared with the literature. Monoterpenes, butadiene, isoprene, aliphatic hydrocarbons, and aromatics formations from α-pinene were consistent with the literature. However, even if benzene has been identified in our experiments, we cannot support with certainty the mechanisms of its formation described in the literature since acetylene was not observed.展开更多
Convective heat transfer and radiative heat transfer are two essential heat transfer modes in the heating process of steel;it is important to understand the role of them during the heating process clearly.The effects ...Convective heat transfer and radiative heat transfer are two essential heat transfer modes in the heating process of steel;it is important to understand the role of them during the heating process clearly.The effects of the convective and radiative heat transfer during the heating process of a cast ingot in a tubular furnace have been studied by the designed natural and forced convection experiments and mathematical simulations.The heating time for the center of the ingot to reach the furnace temperature is decreased with the increase in furnace temperature.According to the experimental and simulation results,a model is proposed regarding the role of radiative and convective heat transfer in the heating process.At low temperature,the convective heat transfer plays a dominant role,while at high temperature,the influence of radiative heat transfer is larger.And a critical temperature exists between them.The forced convective heat transfer can enhance the influence of the convective heat transfer.The critical temperature can be shifted to higher temperatures.展开更多
A three-dimension full-size numerical simulation of the effect of air distribution on turbulent flow and combustion in a tubular heating furnace was carried out. A standard k –ε turbulent model, a simplified PDF c...A three-dimension full-size numerical simulation of the effect of air distribution on turbulent flow and combustion in a tubular heating furnace was carried out. A standard k –ε turbulent model, a simplified PDF combustion model and a discrete ordinate transfer radiation model were used. The hybrid grid combining a structured and a non-structured grid was generated without any simplification of the complicated geometric configuration around the burner. It was found that the multistage combustion could reduce and control the peak value of temperature. At the same time, it was concluded that the amount of primary air had little effect on the global distribution of velocity and temperature in the furnace, but a great effect on that around the burner. It is recommended that 45% - 65% of the total amount of air be taken in in primary air inlets in the furnace. All the results are important to optimize the combustion progress.展开更多
The particle formation mechanism of hydroxyapatite precursor containing two components, Ca(OOCCH3)2 and (NH4)2HPO4 with a ratio of Ca/P = 1.67, in a spray pyrolysis process has been studied by computational fluid ...The particle formation mechanism of hydroxyapatite precursor containing two components, Ca(OOCCH3)2 and (NH4)2HPO4 with a ratio of Ca/P = 1.67, in a spray pyrolysis process has been studied by computational fluid dynamics (CFD) simulation on the transfer of heat and mass from droplets to the surrounding media. The focus included the evaporation of the solvent in the droplets, a second evaporation due to crust formation, the decomposition reaction of each component of the precursor, and a solid-state reaction that included the kinetic parameters of the precursor regarding its two components that formed the hydroxyapatite product. The rate of evaporation and the reacted fraction of the precursor both increased with temperature. The predicted average size of the hydroxyapatite particles agreed well with the experimental results. Therefore, the selected models were also suitable for predicting the average size of particles that contain two components in the precursor solution.展开更多
文摘Induced BVOC emissions from pyrolyzed plants that may accumulate in confined topographies have been a controversy for their role in wildfire eruptions or flashovers. α-pinene (C<sub>10</sub>H<sub>16</sub>) is one of the most abundant monoterpenes emitted from pyrolyzed Mediterranean vegetation in wildfires. Its thermal degradation under fire thermal stresses produces a range of highly flammable gases. In order to identify these products, thermal degradation experiments were performed on α-pinene in a tubular furnace in an inert atmosphere and a high-temperature range (300°C - 900°C). The pyrolysis products were identified using gas chromatography (GC) linked to a tubular furnace outlet by which their retention times were compared with those of reference standards. The degradation products were mainly terpenoids, aliphatic hydrocarbons (methane, ethane, ethene, propane, propene, 1,3-butadiene, isoprene), and aromatics (benzene, toluene) in addition to hydrogen. The radical mechanisms of the chemical reactions associated with the formation of the products at different experimental temperatures were addressed and compared with the literature. Monoterpenes, butadiene, isoprene, aliphatic hydrocarbons, and aromatics formations from α-pinene were consistent with the literature. However, even if benzene has been identified in our experiments, we cannot support with certainty the mechanisms of its formation described in the literature since acetylene was not observed.
基金This research was financially supported by the Beijing Municipal Natural Science Foundation(No.2212041)National Natural Science Foundation of China(No.51804232).
文摘Convective heat transfer and radiative heat transfer are two essential heat transfer modes in the heating process of steel;it is important to understand the role of them during the heating process clearly.The effects of the convective and radiative heat transfer during the heating process of a cast ingot in a tubular furnace have been studied by the designed natural and forced convection experiments and mathematical simulations.The heating time for the center of the ingot to reach the furnace temperature is decreased with the increase in furnace temperature.According to the experimental and simulation results,a model is proposed regarding the role of radiative and convective heat transfer in the heating process.At low temperature,the convective heat transfer plays a dominant role,while at high temperature,the influence of radiative heat transfer is larger.And a critical temperature exists between them.The forced convective heat transfer can enhance the influence of the convective heat transfer.The critical temperature can be shifted to higher temperatures.
文摘A three-dimension full-size numerical simulation of the effect of air distribution on turbulent flow and combustion in a tubular heating furnace was carried out. A standard k –ε turbulent model, a simplified PDF combustion model and a discrete ordinate transfer radiation model were used. The hybrid grid combining a structured and a non-structured grid was generated without any simplification of the complicated geometric configuration around the burner. It was found that the multistage combustion could reduce and control the peak value of temperature. At the same time, it was concluded that the amount of primary air had little effect on the global distribution of velocity and temperature in the furnace, but a great effect on that around the burner. It is recommended that 45% - 65% of the total amount of air be taken in in primary air inlets in the furnace. All the results are important to optimize the combustion progress.
文摘The particle formation mechanism of hydroxyapatite precursor containing two components, Ca(OOCCH3)2 and (NH4)2HPO4 with a ratio of Ca/P = 1.67, in a spray pyrolysis process has been studied by computational fluid dynamics (CFD) simulation on the transfer of heat and mass from droplets to the surrounding media. The focus included the evaporation of the solvent in the droplets, a second evaporation due to crust formation, the decomposition reaction of each component of the precursor, and a solid-state reaction that included the kinetic parameters of the precursor regarding its two components that formed the hydroxyapatite product. The rate of evaporation and the reacted fraction of the precursor both increased with temperature. The predicted average size of the hydroxyapatite particles agreed well with the experimental results. Therefore, the selected models were also suitable for predicting the average size of particles that contain two components in the precursor solution.