Comparison of ERA5 turbulent fluxes at the air-sea interface with measurements from a wave-following platform

Turbulent fluxes at the air-sea interface were estimated with data collected in 2011-2020 with a low-profile platform named OCARINA during eight experiments in five regions:2011,2015,and 2016 in the Iroise Sea;2012 in the tropical Atlantic;2014 in the Chilie-Peru upwelling;2017 and 2018 in the Mediterranean Sea,and 2018 and 2020 in Barbados.The observations were carried out with moderate winds(2-10 m s^(-1))and average wave heights of 1.5 m.In this study,the authors used the fluxes calculated by the bulk method using OCARINA-sampled data as the input.These data can validate the fluxes estimated from ERAS reanalysis data.The OCARINA and ERA5 data were taken concomitantly.To do this,the authors established an algorithm to extract the OCARINA data as closely as possible to the reanalysis data in time and position.The measurements of the OCARINA platform can conclude on the relevance of the widely used reanalysis data.

Observing the air-sea turbulent heat flux on the trajectory of tropical storm Danas

Tropical cyclones constitute a major risk for coastal communities.To assess their damage potential,accurate predictions of their intensification are needed,which requires a detailed understanding of the evolution of turbulent heat flux(THF).By combining multiple buoy observations along the south north storm track,we investigated the THF anomalies associated with tropical storm Danas(2019)in the East China Sea(ECS)during its complete life cycle from the intensification stage to the mature stage and finally to its dissipation on land.The storm passage is characterized by strong winds of 10-20 m/s and a sea level pressure below 1000 hPa,resulting in a substantial enhancement of THF.Latent heat(LH)fluxes are most strongly affected by wind speed,with a gradually increasing contribution of humidity along the trajectory.The relative contributions of wind speed and temperature anomalies to sensible heat(SH)depend on the stability of the boundary layer.Under stable conditions,SH variations are driven by wind speed,while under near-neutral conditions,SH variations are driven by temperature.A comparison of the observed THF and associated variables with outputs from the ERA 5 and MERRA 2 reanalysis products reveals that the reanalysis products can reproduce the basic evolution and composition of the observed THF.However,under extreme weather conditions,temperature and humidity variations are poorly captured by ERA 5 and MERRA 2,leading to large LH and SH errors.The differences in the observed and reproduced LH and SH during the passage of Danas amount to 26.1 and 6.6 W/m^(2) for ERA 5,respectively,and to 39.4 and 12.5 W/m^(2) for MERRA 2,respectively.These results demonstrate the need to improve the representation of tropical cyclones in reanalysis products to better predict their intensification process and reduce their damage.

Investigation of bubbles escape behavior from low basicity mold flux for high-Mn high-Al steels using 3D X-ray microscope

During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a restrictive link,closely associated with viscosity and the thickness of liquid slag.In contrast to two-dimensional surface observation,three-dimensional(3D)analysis method can offer a more intuitive,accurate,and comprehensive information.Therefore,this study employs a 3D X-ray microscope(3D-XRM)to obtained spatial distribution and 3D morphological characteristics of residual bubbles in mold flux under different basicity of liquid slag,different temperatures,and different holding times.The results indicate that as basicity of slag increases from 0.52 to 1.03,temperature increases from 1423 to 1573 K,the viscosity of slag decreases,the floating rate of bubbles increases.In addition,when holding time increases from 10 to 30 s,the bubbles floating distance increases,and the volume fraction and average equivalent sphere diameter of the bubbles solidified in the mold flux gradually decreases.In one word,increasing the basicity,temperature,and holding time leading to an increase in the removal rate of bubbles especially for the large.These findings of bubbles escape behavior provide valuable insights into optimizing low basicity mold flux for high-Mn high-Al steels.

Surface Turbulent Flux Measurements over the Loess Plateau for a Semi-Arid Climate Change Study

In order to provide high quality data for climate change studies, the data quality of turbulent flux measurements at the station of SACOL （Semi-Arid Climate ＆ Environment Observatory of Lanzhou University）, which is located on a semi-arid grassland over the Loess Plateau in China, has been analyzed in detail. The effects of different procedures of the flux corrections on CO2, momentum, and latent and sensible heat fluxes were assessed. The result showed that coordinate rotation has a great influence on the momentum flux but little on scalar fluxes. For coordinate rotation using the planar fit method, different regression planes should be determined for different wind direction sectors due to the heterogeneous nature of the ground surface. Sonic temperature correction decreased the sensible heat flux by about 9%, while WPL correction （correction for density fluctuations） increased the latent heat flux by about 10%. WPL correction is also particularly important for CO2 fluxes. Other procedures of flux corrections, such as the time delay correction and frequency response correction, do not significantly influence the turbulent fluxes. Furthermore, quality tests on stationarity and turbulence development conditions were discussed. Parameterizations of integral turbulent characteristics （ITC） were tested and a specific parameterization scheme was provided for SACOL. The ITC test on turbulence development conditions was suggested to be applied only for the vertical velocity. The combined results of the quality tests showed that about 62%-65% of the total data were of high quality for the latent heat flux and CO2 flux, and as much as about 76% for the sensible heat flux. For the momentum flux, however, only about 35% of the data were of high quality.

Estimation of Turbulent Fluxes Using the Flux-Variance Method over an Alpine Meadow Surface in the Eastern Tibetan Plateau

The flux-variance similarity relation and the vertical transfer of scalars exhibit dissimilarity over different types of surfaces, resulting in different parameterization approaches of relative transport efficiency among scalars to estimate turbulent fluxes using the flux-variance method. We investigated these issues using eddycovariance measurements over an open, homogeneous and flat grassland in the eastern Tibetan Plateau in summer under intermediate hydrological conditions during rainy season. In unstable conditions, the temperature, water vapor, and CO2 followed the flux-variance similarity relation, but did not show in precisely the same way due to different roles （active or passive） of these scalars. Similarity constants of temperature, water vapor and CO2 were found to be 1.12, 1.19 and 1.17, respectively. Heat transportation was more eft% cient than water vapor and CO2. Based on the estimated sensible heat flux, five parameterization methods of relative transport efficiency of heat to water vapor and CO2 were examined to estimate latent heat and CO2 fluxes. The strategy of local determination of flux-variance similarity relation is recommended for the estimation of latent heat and CO2 fluxes. This approach is better for representing the averaged relative transport efficiency, and technically easier to apply, compared to other more complex ones.

Characteristics of land-atmosphere energy and turbulentfluxes over the plateau steppe in central Tibetan Plateau

The land-atmosphere energy and turbulence exchange is key to understanding land surface processes on the Tibetan Plateau(TP). Using observed data for Aug. 4 to Dec. 3, 2012 from the Bujiao observation point(BJ) of the Nagqu Plateau Climate and Environment Station(NPCE-BJ), different characteristics of the energy flux during the Asian summer monsoon(ASM) season and post-monsoon period were analyzed. This study outlines the impact of the ASM on energy fluxes in the central TP. It also demonstrates that the surface energy closure rate during the ASM season is higher than that of the post-monsoon period. Footprint modeling shows the distribution of data quality assessments(QA) and quality controls(QC) surrounding the observation point. The measured turbulent flux data at the NPCE-BJ site were highly representative of the target land-use type. The target surface contributed more to the fluxes under unstable conditions than under stable conditions. The main wind directions(180° and 210°) with the highest data density showed flux contributions reaching 100%, even under stable conditions. The lowest flux contributions were found in sectors with low data density, e.g., 90.4% in the 360° sector under stable conditions during the ASM season. Lastly, a surface energy water balance(SEWAB) model was used to gap-fill any absent or corrected turbulence data. The potential simulation error was also explored in this study. The Nash-Sutcliffe model efficiency coefficients(NSEs) of the observed fluxes with the SEWAB model runs were 0.78 for sensible heat flux and 0.63 for latent heat flux during the ASM season, but unrealistic values of-0.9 for latent heat flux during the post-monsoon period.

Evaluation of monthly turbulent heat fluxes from WHOI analysis and NCEP reanalysis in the tropical Atlantic

The biases and their sources in monthly turbulent heat fluxes from the Woods Hole Oceanographic Institution （WHOI） analysis, and the National Centers for Environmental Prediction-National Center for Atmospheric Research reanalyses 1 and 2 （NCEPI and NCEP2） are checked in the climatically representative regions in the tropical Atlantic using the fluxes from the Southampton Oceanographic Centre （SOC） and the pilot research moored array in the tropical Atlantic （PIRATA） as references. For the WHOI analysis, the biases in turbulent heat fluxes mainly exist in equatorial regions which are due to the overestimated sea surface temperature and the underestimated 2 m air humidity. For the NCEP2 reanalysis, the maximum biases, about （40±5） W/m^2, exist in southeast and northeast trade wind regions, which are mainly caused by the flux algorithm used because the biases in wind speed and air-sea humidity difference are relatively small. In the equatorial regions, the flux biases in the NCEP2 derived from both flux-related basic variables and algorithm are equally large. Although the estimations of time series trends and air-sea humidity difference of the NCEPI are improved greatly in the NCEP2, the biases of latent heat flux in the NCEP2 are about 20 W/m^2 greater than those from the NCEP1 in the trade wind regions. The result shows that the climatologies and monthly variabilities of the turbulent heat fluxes from the WHOI are more accurate than those from the NCEP1 and NCEP2 in the tropical Atlantic, especially on outside of the equatorial regions.

A Note on Reviving the Goddard Satellite-Based Surface Turbulent Fluxes (GSSTF) Dataset

Accurate sea surface flux measurements are crucial for understanding the global water and energy cycles. The oceanic evaporation, which is a major component of the global oceanic fresh water flux, is useful for predicting oceanic circulation and transport. The global Goddard Satellite-based Surface Turbulent Fluxes Version-2 （GSSTF2; July 1987–December 2000） dateset that was o？cially released in 2001 has been widely used by scientific community for global energy and water cycle research, and regional and short period data analyses. We have recently been funded by NASA to resume processing the GSSTF dataset with an objective of continually producing a uniform dataset of sea surface turbulent fluxes, derived from remote sensing data. The dataset is to be reprocessed and brought up-to-date （GSSTF2b） using improved input datasets such as a recently upgraded NCEP/DOE sea surface temperature reanalysis, and an upgraded surface wind and microwave brightness temperature V6 dataset （Version 6） from the Special Sensor Microwave Imager （SSM/I） produced by Remote Sensing Systems （RSS）. A second new product （GSSTF3） is further proposed with a finer temporal （12-h） and spatial （0.25° × 0.25°） resolution. GSSTF2b （July 1987–December 2008） and GSSTF3 （July 1999–December 2009） will be released for the research community to use by late 2009 and early 2011, respectively.

Evaluating Parameterizations for Turbulent Fluxes over the Landfast Sea-Ice Surface in Prydz Bay, Antarctica

It is crucial to appropriately determine turbulent fluxes in numerical models.Using data collected in East Antarctica from 8 April to 26 November 2016,this study evaluates parameterization schemes for turbulent fluxes over the landfast seaice surface in five numerical models.The Community Noah Land Surface Model with Multi-Parameterizations Options(Noah_mp)best replicates the turbulent momentum flux,while the Beijing Climate System Model(BCC_CSM)produces the optimum sensible and latent heat fluxes.In particular,two critical issues of parameterization schemes,stability functions and roughness lengths,are investigated.Sensitivity tests indicate that roughness lengths play a decisive role in model performance.Based on the observed turbulent fluxes,roughness lengths over the landfast sea-ice surface are calculated.The results,which can provide a basis for setting up model parameters,reveal that the dynamic roughness length(z0m)increases with the increase of frictional velocity(u*)when u*≤0.4 m s^(−1) and fluctuates around 10^(−3 )m when u*>0.4 m s^(−1);thermal roughness length(z0t)is linearly related to the temperature gradient between air and sea-ice surface(ΔT)with a relation of lg(z0t)=−0.29ΔT−3.86;and the mean water vapor roughness length(z0q)in the specific humidity gradient(Δq)range ofΔq≤−0.6 g kg^(−1) is 10^(−6) m,3.5 times smaller than that in the range ofΔq˃−0.6 g kg^(−1).

Seasonal variability of turbulent heat fluxes in the tropical Atlantic Ocean based on WHOI flux product

The mean seasonal variability of turbulent heat fluxes in the tropical Atlantic Ocean is examined using the Woods Hole Oceanographic Institution （WHOI） flux product. The most turbulent heat fluxes occur during winter seasons in the two hemispheres, whose centers are located at 10° -20°N and 5° 15°S respectively. In climatological ITCZ, the turbulent heat fluxes are the greatest from June to August, and in equatorial cold tongue the turbulent heat fluxes are the greatest from March to May. Seasonal variability of sensible heat flux is smaller than that of latent heat flux and mainly is dominated by the variations of air-sea temperature difference. In the region with larger climatological mean wind speed （air-sea humidity difference）, the variations of air-sea humidity difference （wind speed） dominate the variability of latent heat flux. The characteristics of turbulent heat flux yielded from theory analysis and WHOI dataset is consistent in physics which turns out that WHOI＇ s flux data are pretty reliable in the tropical Atlantic Ocean.

Effect of Counter-Gradient in the Computation of Turbulent Fluxes of Heat and Moisture in a Regional Model

The counter-gradient terms in the computations of turbulent fluxes of heat and moisture have been included in the PBL parameterization of a regional model for monsoon prediction. Results show that inclusion of counter-gradient terms has a marginal impact in the prediction of large scale monsoon circulation and rainfall rates.

An improved algorithm of simulation on air-sea turbulent heat fluxes in China seas

With a global GSSTF2 and NCEP/NCAR reanalysis database and observation data at the Yong Xing station of Xisha Island in the South China Sea, we simulated the turbulent sensible and latent heat flux at sea surface in Chinese and neighboring seas (hereafter termed as China seas) using a common bulk method with some improved parameters. Comparing the simulated results with the observed and reanalyzed data, the improvement yielded higher accuracy, a smaller mean square deviation within 10 W/m2, and a smaller average relative error at about 25%. In addition, spatial resolution was improved to 0.1°×0.1°. The simulation is able to replay the main features of regional and seasonal variation in turbulent heat fluxes, and also the general pattern of heat flux changes during the summer monsoon outbreak in the South China Sea.

Observation Research of the Turbulent Fluxes of Momentum, Sensible Heat and Latent Heat over the West Pacific Tropical Ocean Area

This paper describes results of the fluxes of momentum , sensible heat and latent heat for the West Pacific Tropical Ocean Area ( 127 ° E - 150 ° E , 5 ° N -3 ° S ). The data were collected by the small tethered balloon sounding system over this ocean area including 6 continuous stations (140 ° E. 0 ° ; 145 ° E, 0 ° ; 150 ° E, 0 ° ; 140° E, 5 ° N; 145 ° E, 5° N and 150 ° E, 5 ° N) from 11 October to 15 December, 1986 . These fluxes were calculated by the semiempirical flux-profile relationships of Monin-Obukhov similarity theory using these observed data. The results show that for this tropical ocean area the drag coefficient CD is equal to (1.53 ± 0.25) × 10 3 and the daily mean latent flux Hl is greater than its daily mean sensible flux HV by a factor of about 9.

Estimations of Land Surface Characteristic Parameters and Turbulent Heat Fluxes over the Tibetan Plateau Based on FY-4A/AGRI Data

Accurate estimates of land surface characteristic parameters and turbulent heat fluxes play an important role in the understanding of land-atmosphere interaction. In this study, Fengyun-4A (FY-4A) Advanced Geostationary Radiation Imager (AGRI) satellite data and the China Land Data Assimilation System (CLDAS) meteorological forcing dataset CLDAS-V2.0 were applied for the retrieval of broadband albedo, land surface temperature (LST), radiation flux components, and turbulent heat fluxes over the Tibetan Plateau (TP). The FY-4A/AGRI and CLDAS-V2.0 data from 12 March 2018 to 30 April 2018 were first used to estimate the hourly turbulent heat fluxes over the TP. The time series data of in-situ measurements from the Tibetan Observation and Research Platform were divided into two halves-one for developing retrieval algorithms for broadband albedo and LST based on FY-4A, and the other for the cross validation. Results show the root-mean-square errors (RMSEs) of the FY-4A retrieved broadband albedo and LST were 0.0309 and 3.85 K, respectively, which verifies the applicability of the retrieval method. The RMSEs of the downwelling/upwelling shortwave radiation flux and downwelling/upwelling longwave radiation flux were 138.87/32.78 W m^(−2) and 51.55/17.92 W m^(−2), respectively, and the RMSEs of net radiation flux, sensible heat flux, and latent heat flux were 58.88 W m^(−2), 82.56 W m^(−2) and 72.46 W m^(−2), respectively. The spatial distributions and diurnal variations of LST and turbulent heat fluxes were further analyzed in detail.

The impact of heterogeneity of land surface roughness length on estimation of turbulent flux in model

Based on preliminary theoretical analysis and numerical experiment, it is found that land surface heterogeneity plays an important role in the models turbulent flux calculation. In nearly neutral atmosphere conditions, variation coefficient of sub-scale roughness length, cell-average roughness, and reference height are main factors affecting the calculation of grid turbulent fluxes. The first factor has a determinant role on calculation deviation. The relative error generated by roughness heterogeneity could be more than 40% in some cases in certain areas （e.g., in vegetation-climate transition belt）. Selecting a specific reference height may improve the calculation of turbulent flux. In stable or unstable atmosphere conditions, with sensible heat flux as an example, analysis shows that the discrepancy is correlated to the sub-grid distributions of mean wind velocity, potential temperature gradient between land surface and reference levels, and atmosphere stability near surface layer caused by the heterogeneity of land surface roughness. The calculation of turbulent flux is the most sensitive to stability in the above three factors. The above analysis shows that it is necessary to make a further consideration for the calculation deviation of the turbulent fluxes brought from land surface heterogeneity in the present numerical models.

Eddy covariance measurements of turbulent fluxes in the surf zone

Turbulent eddies play a critical role in oceanic flows. Direct measurements of turbulent eddy fluxes beneath the sea surface were taken to study the direction of flux-carrying eddies as a means of supplementing our understanding of vertical fluxes exchange processes and their relationship to tides. The observations were made at 32 Hz at a water depth of ~1.5 m near the coast of Sanya, China, using an eddy covariance system, which mainly consists of an acoustic doppler velocimeter(ADV) and a fast temperature sensor. The cospectra-fit method-an established semi-empirical model of boundary layer turbulence to the measured turbulent cospectra at frequencies below those of surface gravity waves-was used in the presence of surface gravity waves to quantify the turbulent eddy fluxes(including turbulent heat flux and Reynolds stress). As much as 87% of the total turbulent stress and 88% of the total turbulent heat flux were determined as being at band frequencies below those of surface gravity waves. Both the turbulent heat flux and Reynolds stress showed a daily successive variation;the former peaked during the low tide period and the later peaked during the ebb tide period.Estimation of roll-off wavenumbers, k0, and roll-off wavelengths, λ0(where λ0=2π/k0), which were estimated as the horizontal length scales of the dominant flux-carrying turbulent eddies, indicated that the λ0 of the turbulent heat flux was approximately double that of the Reynolds stress. Wavelet analysis showed that both the turbulent heat flux and the Reynolds stress have a close relationship to the semi-diurnal and diurnal tides, and therefore indicate the energy that is transported from tides to turbulence.

Bursty Behaviour of Turbulent Particle and Energy Fluxes in Edge Plasma of HT-7 Tokamak

High time resolution measurements of the electrostatic fluctuations and the turbulent particle and energy fluxes have been performed with a Langmuir probe array in the edge plasma in HT-7 tokamak. Bursty behaviour was observed in the time resolved turbulent fluxes with positive skewness and large kurtosis. The contribution of the large sporadic bursts to the transport losses were estimated. The analysis shows that the turbulent fluxes have different behaviour in different frequency domains and the probability distribution functions （PDFs） of the particle and energy fluxes present two distinct scaling ranges. All these are essentially consistent with the predictions of the self-organized criticality （SOC） model, though further studies are needed.

Diffusion and reaction mechanism of limestone and quartz in fluxed iron ore pellet roasting process

The increase to the proportion of fluxed pellets in the blast furnace burden is a useful way to reduce the carbon emissions in the ironmaking process.In this study,the interaction between calcium carbonate and iron ore powder and the mineralization mechanism of fluxed iron ore pellet in the roasting process were investigated through diffusion couple experiments.Scanning electron microscopy with energy dispersive spectroscopy was used to study the elements’diffusion and phase transformation during the roasting process.The results indicated that limestone decomposed into calcium oxide,and magnetite was oxidized to hematite at the early stage of preheating.With the increase in roasting temperature,the diffusion rate of Fe and Ca was obviously accelerated,while the diffusion rate of Si was relatively slow.The order of magnitude of interdiffusion coefficient of Fe_(2)O_(3)-CaO diffusion couple was 10^(−10) m^(2)·s^(−1) at a roasting temperature of 1200℃for 9 h.Ca_(2)Fe_(2)O_(5) was the initial product in the Fe_(2)O_(3)-CaO-SiO_(2) diffusion interface,and then Ca_(2)Fe_(2)O_(5) continued to react with Fe_(2)O_(3) to form CaFe_(2)O_(4).With the expansion of the diffusion region,the sillico-ferrite of calcium liquid phase was produced due to the melting of SiO_(2) into CaFe_(2)O_(4),which can strengthen the consolidation of fluxed pellets.Furthermore,andradite would be formed around a small part of quartz particles,which is also conducive to the consolidation of fluxed pellets.In addition,the principle diagram of limestone and quartz diffusion reaction in the process of fluxed pellet roasting was discussed.

FPGA-based position reconstruction method for neutron beam flux spatial distribution measurement in BNCT

A new measurement method for the spatial distribution of neutron beam flux in boron neutron capture therapy(BNCT)is being developed based on the two-dimensional Micromegas detector.To address the issue of long processing times in traditional offline position reconstruction methods,this paper proposes a field programmable gate array based online position reconstruction method utilizing the micro-time projection chamber principle.This method encapsulates key technical aspects:a self-adaptive serial link technique built upon the dynamical adjustment of the delay chain length,fast sorting,a coordinate-matching technique based on the mapping between signal timestamps and random access memory(RAM)addresses,and a precise start point-merging technique utilizing a circular combined RAM.The performance test of the selfadaptive serial link shows that the bit error rate of the link is better than 10-12 at a confidence level of 99%,ensuring reliable data transmission.The experiment utilizing the readout electronics and Micromegas detector shows a spatial resolution of approximately 1.4 mm,surpassing the current method’s resolution level of 5 mm.The beam experiment confirms that the readout electronics system can obtain the flux spatial distribution of neutron beams online,thus validating the feasibility of the position reconstruction method.The online position reconstruction method avoids traditional methods,such as bubble sorting and traversal searching,simplifies the design of the logic firmware,and reduces the time complexity from O(n2)to O(n).This study contributes to the advancement in measuring neutron beam flux for BNCT.

Role of Turbulent Heat Fluxes over Land in the Monsoon over East Asia

Atmospheric heat and moisture over land are fundamental drivers of monsoon circulations. However, these drivers are less frequently considered in explaining the development and overall intensity of monsoons than heat and moisture over the ocean. In this study, the roles of turbulent heat fluxes over land in the monsoon system over East Asia are examined using Climatic Research Unit observations and European Centre for Medium-Range Weather Forecasts reanalysis, and they are further explored using simulated sensible (H) and latent (LE) heat fluxes from an ecosystem model (Predicting Ecosystem Goods and Services Using Scenarios or PEGASUS). Changes in the H fluxes over the land during the pre-monsoon season (March-May: MAM) affect the differential heating between land and ocean, which in turn controls monsoon development. In July, an intensified contrast of the mean sea level pressure between land and ocean is observed during the years of stronger land-sea H contrast in MAM, which results in enhanced onshore flows and more rainfall over southern East Asia. After monsoon onset, the contrast of H is influenced by monsoon rainfall through the cooling effect of precipitation on surface air temperature. During the monsoon season (June-September: JJAS), LE fluxes are more important than H fluxes, since LE fluxes over land and ocean affect overall monsoon intensity through changes in the land-sea contrast of turbulent heat fluxes. Significantly increased monsoon rainfall over western East Asia is observed during the years of larger LE over the land in JJAS. In ecosystem modeling, we find that the monsoon can be weakened as potential (natural) vegetation is converted to bare ground or irrigated cropland. Simulated H fluxes in MAM and LE fluxes in JJAS over the land significantly decrease in irrigated crop and bare ground scenarios, respectively, which play crucial roles in controlling monsoon development and overall intensity.