Turbulent Kinetic Energy of Flow during Inhale and Exhale to Characterize the Severity of Obstructive Sleep Apnea Patient

This paper aims to investigate and present the numerical investigation of airflow characteristics using Turbulent Kinetic Energy(TKE)to characterize the upper airway with obstructive sleep apnea(OSA)under inhale and exhale breathing conditions.The importance of TKE under both breathing conditions is that it showan accuratemethod in expressing the severity of flow in sleep disorder.Computational fluid dynamics simulate the upper airway’s airflow via steady-state Reynolds-averaged Navier-Stokes(RANS)with k–ωshear stress transport(SST)turbulencemodel.The three-dimensional(3D)airway model is created based on the CT scan images of an actual patient,meshed with 1.29 million elements using Materialise Interactive Medical Image Control System(MIMICS)and ANSYS software,respectively.High TKE were noticed around the region after the necking(smaller cross-sectional area)during the inhale and exhale breathing.The turbulent kinetic energy could be used as a valuablemeasure to identify the severity of OSA.This study is expected to provide a better understanding and clear visualization of the airflow characteristics during the inhale and exhale breathing in the upper airway of patients for medical practitioners in the OSA research field.

Turbulence Intensity and Turbulent Kinetic Energy Parameters over a Heterogeneous Terrain of Loess Plateau

A deep understanding of turbulence structure is important for investigating the characteristics of the atmospheric boundary layer,especially over heterogeneous terrain.In the present study,turbulence intensity and turbulent kinetic energy（TKE）parameters are analyzed for different conditions with respect to stability,wind direction and wind speed over a valley region of the Loess Plateau of China during December 2003 and January 2004.The purpose of the study is to examine whether the observed turbulence intensity and TKE parameters satisfy Monin–Obukhov similarity theory（MOST）,and analyze the wind shear effect on,and thermal buoyancy function of,the TKE,despite the terrain heterogeneity.The results demonstrate that the normalized intensity of turbulence follows MOST for all stability in the horizontal and vertical directions,as well as the normalized TKE in the horizontal direction.The shear effect of the wind speed in the Loess Plateau region is strong in winter and could enhance turbulence for all stability conditions.During daytime,the buoyancy and shear effect together constitute the generation of TKE under unstable conditions.At night,the contribution of buoyancy to TKE is relatively small,and mechanical shearing is the main production form of turbulence.

Estimation of Turbulent Kinetic Energy Dissipation Rate in the Bottom Boundary Layer of the Pearl River Estuary

A structure function approach is applied to estimate the turbulent kinetic energy （TKE） dissipation rate in the bottom boundary layer of the Pearl River Estuary （PRE）. Simultaneous measurements with an acoustic Doppler velocimeter （ADV） supplied independent data for the verification of the structure function method. The results show that, 1） the structure function approach is reliable and successfully applied method to estimate the TKE dissipation rate. The observed dissipation rates range between 8.3 ×10^-4 W/kg and 4.9× 10^-6 W/kg in YM01 and between 3.4×10^-4 W/kg and 4.8×10^-7 W/kg in YM03, respectively, while exhibiting a strong quarter-diurnal variation. 2） The balance between the shear production and viscous dissipation is better achieved in the straight river. This first-order balance is significantly broken in the estuary by non-shear production/dissipation due to wave-induced fluctuations.

Research on blade tip clearance cavitation and turbulent kinetic energy characteristics of axial flow pump based on the partially-averaged Navier-Stokes model

To reveal the cavitation forms of tip leakage vortex(TLV)of the axial flow pump and the flow mechanism of the flow field,this research adopts the partially-averaged Navier-Stokes(PANS)model to simulate the cavitation values of an axial flow pump,followed by experimental validation.The experimental result shows that compared with the shear stress transport(SST)k-ωmodel,the PANS model significantly reduces the eddy viscosity of the flow field to make the vortex structure clearer and allow the turbulence scale to be more robustly analyzed.The cavitation area within the axial flow pump mainly comprises of TLV cavitation,clearance cavitation and tip leakage flows combined effect of triangular cloud cavitation formed.The formation and development of cavitation are accompanied by the formation and evolution of vortex,and variations in vortex structure also generate and promote the development of cavitation.In addition,an in-depth analysis of the relationship between the turbulent kinetic energy(TKE)transport equation and cavitation patterns was also conducted,finding that the regions with relatively high TKE are mainly distributed around gas/liquid boundaries with serious cavitation and evident gas-liquid change.This phenomenon is mainly attributed to the combined effect of the pressure action term,stress diffusion term and TKE production term.

Spatial and spectral investigation of turbulent kinetic energy in cavitating flow generated by Clark-Y hydrofoil

In the present paper,the turbulent cavitating flow generated by a Clark-Y hydrofoil is investigated by large eddy simulation(LES)combined with Zwart-Gerber-Belamri(ZGB)cavitation model.In order to shed light on the influence of cavitation on turbulent energy distribution among scales,energy spectrum obtained from the three-dimensional velocity field is firstly applied to turbulent cavitating flow.Spatial and spectral distributions of turbulent kinetic energy are studied for both non-cavitating flow and cavitating flow.Cavitation is found to have a significant effect on the original turbulent flow by inducing more large-scale turbulent structures.The energy spectrum of cloud cavitating flow also experiences a periodic evolution as cavitation develops,and a large amount of turbulent kinetic energy is found to generate as the first shedding,cutoff and second shedding of cavities happen.

Double-averaging analysis of turbulent kinetic energy fluxes and budget based on large-eddy simulation

The turbulent flow over a channel bed roughened by three layers of closely packed spheres with a Reynolds number of Re= 15 000 is investigated using the large eddy simulation（LES） and the double-averaging（DA） method. The DA velocity is compared with the results of the corresponding laboratory experiments to validate the LES results. The existence of the types of vortex structures is demonstrated by the Q-criterion above the permeable bed. The turbulent kinetic energy（TKE） fluxes and budget are quantified and discussed. The results show that the TKE fluxes are directed downward and downstream near the virtual bed level. In the TKE budget, the form-induced diffusion rate is significant in the vicinity of the crest bed level, and the TKE production rate and the dissipation rate attain their peaks at the crest bed level and decrease sharply below it.

Significance of including lid thickness and particle shape factor in numerical modeling for prediction of particle trap efficiency of invert trap

Sediment accumulation on the bed of open sewers and drains reduces hydraulic efficiency and can cause localized flooding.Slotted invert traps installed underneath the bed of open sewers and drains can eliminate sediment build-up by catching sediment load.Previous three-dimensional(3D)computational studies have examined the particle trapping performance of invert traps of different shapes and depths under varied sediment and flow conditions,considering particles as spheres.For two-dimensional and 3D numerical modeling,researchers assumed the lid geometry to be a thin line and a plane,respectively.In this 3D numerical study,the particle trapping efficiency of a slotted irregular hexagonal invert trap fitted at the flume bottom was examined by incorporating the particle shape factor of non-spherical sewage solid particles and the thicknesses of upstream and downstream lids over the trap in the discrete phase model of the ANSYS Fluent 2020 R1 software.The volume of fluid(VOF)and the realizable k-turbulence models were used to predict the velocity field.The two-dimensional particle image velocimetry(PIV)was used to measure the velocity field inside the invert trap.The results showed that the thicknesses of upstream and downstream lids affected the velocity field and turbulent kinetic energy at all flow depths.The joint impact of the particle shape factor and lid thickness on the trap efficiency was significant.When both the lid thickness and particle shape factor were considered in the numerical modeling,trap efficiencies were underestimated,with relative errors of-8.66%to-0.65%in comparison to the experimental values of Mohsin and Kaushal(2017).They were also lower than the values predicted by Mohsin and Kaushal(2017),which showed an overall overestimation with errors of-2.3%to 17.4%.

Wavelet spectrum analysis on energy transfer of multi-scale structures in wall turbulence

The streamwise velocity components at different vertical heights in wall turbulence were measured. Wavelet transform was used to study the turbulent energy spectra, indicating that the global spectrum results from the weighted average of Fourier spectrum based on wavelet scales. W＇avelet transform with more vanishing moments can express the declining of turbulent spectrum. The local wavelet spectrum shows that the physical phenomena such as deformation position in the boundary layer, and the or breakup of eddies are related to the vertical energy-containing eddies exist in a multi-scale form. Moreover, the size of these eddies increases with the measured points moving out of the wall. In the buffer region, the small scale energy-containing eddies with higher frequency are excited. In the outer region, the maximal energy is concentrated in the low-frequency large-scale eddies, and the frequency domain of energy-containing eddies becomes narrower.

The cruise observation of turbulent mixing in the upwelling region east of Hainan Island in the summer of 2012

The turbulent mixing in the upwelling region east of Hainan Island in the South China Sea is analyzed based on in situ microstructure observations made in July 2012. During the observation, strong upwelling appears in the coastal waters, which are 3℃ cooler than the offshore waters and have a salinity 1.0 greater than that of the offshore waters. The magnitude of the dissipation rate of turbulent kinetic energy ε in the upwelling region is O（10–9 W/kg）, which is comparable to the general oceanic dissipation. The inferred eddy diffusivity Kρ is O（10–6 m2/s）, which is one order of magnitude lower than that in the open ocean. The values are elevated to Kρ≈O（10–4 m2/s） near the boundaries. Weak mixing in the upwelling region is consistent with weak instability as a result of moderate shears versus strong stratifications by the joint influence of surface heating and upwelling of cold water.The validity of two fine-scale structure mixing parameterization models are tested by comparison with the observed dissipation rates. The results indicate that the model developed by Mac Kinnon and Gregg in 2003 provides relatively better estimates with magnitudes close to the observations. Mixing parameterization models need to be further improved in the coastal upwelling region.

Shear Flows in the Near-Turbulent Wake Region of High Speed Trains

Two flow cases for scaled high speed train models with different length are numerically analyzed in the framework of the improved delayed detachededdy simulation model.Specific attention is paid to the shear flows and related mechanisms in the near turbulent wake created by these moving models.In particular,a comparative analysis is made on the distributions of turbulent kinetic energy(TKE)and turbulence production(TP)in planes perpendicular to the streamwise direction.The numerical results suggest that,in the wake region very close to the tail,significant TKE and TP can be ascribed to the dynamic interaction between powerful eddies and strong shear,which explain why these quantities are sensitive to the shear strength.The shear flows are essentially governed by the boundary layers developing along the streamwise direction on the train surfaces,especially from the under-body region and the side walls.For other positions located in the downstream direction away from the tail,the interaction of vortices with the non-slip ground serves as a mechanism to promote transfer of energy from weak eddies to turbulence through the shear present in planes parallel to the ground.

Multi-physical Modeling and Adjusting for Ultrasonic Assisted Soft Abrasive Flow Processing

The polishing efficiency of the soft abrasive flow(SAF)method is low,which is not in line with the concept of carbon emission reduction in industrial production.To address the above issue,a two-phase fluid multi-physics modeling method for ultrasonic-assisted SAF processing is proposed.The acoustics-fluid coupling mechanic model based on the realizable k-ε model and Helmholtz equation is built to analyze the cavitation effect.The results show that the pro-posed modeling and solution method oriented to ultrasonic-assisted SAF processing have better revealed the flow field evolution mechanism.The turbulence kinetic energy at different ultrasonic frequencies and amplitudes is stud-ied.Simulation results show that the ultrasonic vibration can induce a cavitation effect in the constrained flow chan-nel and promote the turbulence intensity and uniformity of the abrasive flow.A set of comparative polishing experiments with or without ultrasonic vibration are conducted to explore the performance of the proposed method.It can be found that the ultrasonic-assisted SAF method can improve the machining efficiency and uniformity,to achieve the purpose of carbon emission reduction.The relevant result can offer a helpful reference for the SAF method.

Simulation of the ocean surface mixed layer under the wave breaking

A one-dimensional mixed-layer model, including a Mellor- Yamada level 2.5 turbulence closure scheme, was implemented to investi- gate the dynamical and thermal structures of the ocean surface mixed layer in the northern South China Sea. The turbulent kinetic ener- gy released through wave breaking was incorporated into the model as a source of energy at the ocean surface, and the influence of the breaking waves on the mixed layer was studied. The numerical simulations show that the simulated SST is overestimated in summer without the breaking waves. However, the cooler SST is simulated when the effect of the breaking waves is considered, the corre- sponding discrepancy with the observed data decreases up to 20% and the MLD calculated averagely deepens 3.8 m. Owing to the wave-enhanced turbulence mixing in the summertime, the stratification at the bottom of the mixed layer was modified and the tempera- ture gradient spread throughout the whole thermocline compared with the concentrated distribution without wave breaking.

Analysis on the Interaction between Turbulence and Secondary Circulation of the Surface Layer at Jinta Oasis in Summer

The kinetic energy variations of mean flow and turbulence at three levels in the surface layer were calculated by using eddy covariance data from observations at Jinta oasis in 2005 summer. It is found that when the mean horizontal flow was stronger, the turbulent kinetic energy was increased at all levels, as well as the downward mean wind at the middle level. Since the mean vertical flow on the top and bottom were both negligible at that time, there was a secondary circulation with convergence in the upper half and divergence in the lower half of the column. After consideration of energy conversion, it was found that the interaction between turbulence and the secondary circulation caused the intensification of each other. The interaction reflected positive feedback between turbulence and the vertical shear of the mean flow. Turbulent sensible and latent heat flux anomaly were also analyzed. The results show that in both daytime and at night, when the surface layer turbulence was intensified as a result of strengthened mean flow, the sensible heat flux was decreased while the latent heat flux was increased. Both anomalous fluxes contributed to the cold island effect and the moisture island effect of the oasis.

Large Eddy Simulation and Study of the Urban Boundary Layer

Based on a pseudo-spectral large eddy simulation (LES) model, an LES model with an anisotropy turbulent kinetic energy (TKE) closure model and an explicit multi-stage third-order Runge-Kutta scheme is established. The modeling and analysis show that the LES model can simulate the planetary boundary layer (PBL) with a uniform underlying surface under various stratifications very well. Then, similar to the description of a forest canopy, the drag term on momentum and the production term of TKE by subgrid city buildings are introduced into the LES equations to account for the area-averaged effect of the subgrid urban canopy elements and to simulate the meteorological fields of the urban boundary layer (UBL). Numerical experiments and comparison analysis show that: (1) the result from the LES of the UBL with a proposed formula for the drag coefficient is consistent and comparable with that from wind tunnel experiments and an urban subdomain scale model; (2) due to the effect of urban buildings, the wind vel

CFD modeling to study the effect of particle size on dispersion in 20l explosion chamber: An overview

Mine disasters occur predominantly due to methane or coal dust explosion or a combination of both.Among the top ten worst coal mine disasters in India, nine are due to coal dust explosion. The current paper describes a general overview of the parameters causing dispersion leading to coal dust explosion,and computational fluid dynamics(CFD) simulation study to observe the effects of particle size on dispersion in Indian coal mines. Turbulent kinetic energy(TKE) and velocity vector path of dust-air mixture and dust-free air were simulated to understand their effects on coal dust dispersion. The TKE contours and velocity vector paths for dust-free air were uniform and symmetrical due to resistance-free path available. The TKE contours and velocity vector paths for dust-air mixture shows the asymmetrical distribution of contours, due to entrainment of air with dust particles. Vortices were observed in velocity vector paths which gradually diminish on increment of time sequence. These vortices are dead centres where velocity and coal dust particles concentration are both zero.

EFFECTS OF SPLITTER BLADES ON THE LAW OF INNER FLOW WITHIN CENTRIFUGAL PUMP IMPELLER

Analysis on the inner flow field of a centrifugal pump impeller with splitter blades is carfled out by numerical simulation. Based on this analysis, the principle of increasing pump head and efficiency are discussed. New results are obtained from the analysis of turbulence kinetic energy and relative velocity distribution： Firstly, unreasonable length or deviation design of the splitter blades may cause great turbulent fluctuation in impeller channel, which has a great effect on the stability of impeller outlet flow; Secondly, it is found that the occurrence of flow separation can be decreased or delayed with splitter blades from the analysis of blade loading; Thirdly, the effect of splitter blades on reforming the structure of ＂jet-wake＂ is explained from the relative velocity distribution at different flow cross-sections, which shows the flow process in the impeller. The inner flow analysis verifies the results of performance tests results and the PIV test.

Rainfall effect on wind waves and the turbulence beneath air-sea interface

Rainfall effects on wind waves and turbulence are investigated through the laboratory experiments in a large wind-wave tank. It is found that the wind waves are damped as a whole at low wind speeds, but are enhanced at high wind speeds. This dual effect of rain on the wind waves increases with the increase of rain rate, while the influence of rainfall-area length is not observable. At the low wind speed, the corresponding turbulence in terms of the turbulent kinetic energy （TKE） dissipation rate is significantly enhanced by rain- fall as the waves are damped severely. At the high wind speed, the augment of the TKE dissipation rate is suppressed while the wind waves are enhanced simultaneously. In the field, however, rainfall usually hin- ders the development of waves. In order to explain this contradiction of rainfall effect on waves, a possibility about energy transfer from turbulence to waves in case of the spectral peak of waves overlapping the inertial subrange of turbulence is assumed. It can be applied to interpret the damping phenomenon of gas trans- fer velocity in the laboratory experiments, and the variation of the TKE dissipation rates near sea surface compared with the law of wall.

Experimental Study of Hydrodynamic and Self-Buried Behavior of Submarine Pipeline with Perpendicular Spoilers

The spoiler is a kind of device to disturb current and promote burying.At present,all submarine pipeline spoilers at home and abroad are parallel spoilers,that is,the plane of the spoiler is parallel to the vertical plane of the pipeline axis.According to the results of indoor experiments,when the pipeline with the forward spoiler is installed perpendicular to the direction of water flow,the spoiler will accelerate the seabed erosion and cause the pipeline to endure downward pressure,which will eventually cause the pipeline self-buried to form a protection.However,when the pipeline direction is consistent with the flow direction,the self-buried behavior and protective effect is vanished.By aiming at the defect that the forward spoiler cannot be self-buried when the direction of the pipeline and the flow are basically parallel,the spoiler burying aid device perpendicular to the pipeline axis has been innovatively developed,and the hydrodynamic changes and sediment erosion characteristics near the pipeline after the installation of the device were studied based on the experiment.Results reveal that although the perpendicular spoiler cannot generate downforce,it can greatly increase the turbulent kinetic energy of the flow and the rate of sediment erosion.The larger the angle between the pipeline axis and the spoiler plane is,the larger the increase in turbulent energy will be.The increase in turbulent energy near the bed surface can reach up about 70%when the angle is 90°,while serious sediment erosion mainly occurs along both sides of the pipeline with a distance of about 2−4 times the pipe diameter.In the future,we can further explore the influence of the perpendicular spoiler size and installation position on the pipeline downforce and the effect of burying promotion.At the same time,field tests on the perpendicular spoiler burying aid device currently developed will conduct to observe the actual effect of perpendicular spoiler promoting pipeline scouring and burying,and improve submarine pipeline safety protection technology.

Idealized Numerical Simulation Study of the Potential Vorticity Banners over a Mesoscale Mountain: Dry Adiabatic Process

Topography-induced potential vorticity （PV） banners over a mesoscale topography （Dabie Mountain, hereafter DM） in eastern China, under an idealized dry adiabatic flow, are studied with a mesoscale numerical model, ARPS. PV banners generate over the leeside of the DM with a maximal intensity of ～1.5 PVU, and extend more than 100 km downstream, while the width varies from several to tens of kilometers, which contrasts with the half-width of the peaks along the ridge of the DM. Wave breaking occurs near the leeside surface of the DM, and leads to a strong PV generation. Combining with the PV generation, due to the friction and the flow splitting upstream, the PV is advected downstream, and then forms the PV banners over the DM. The PV banners are sensitive to the model resolution, Coriolis force, friction, subgrid turbulent mixing, stratification, the upstream wind speed and wind direction. The negative PV banners have a more compact connection with the low level turbulent kinetic energy. The PV banners are built up by the baroclinic and barotropic components. The barotropic-associated PV can identify the distribution of the PV banners, while the baroclinic one only has important contributions on the flanks and on the leeside near the topography. PV fluxes are diagnosed to investigate the influence of friction on the PV banners. Similar patterns are found between the total PV flux and the advective PV flux, except near the surface and inside the dipole of the PV banners, where the nonadvective PV flux associated with the friction has a net negative contribution.

EFFECT OF SUBMERGED ENTRY NOZZLE (SEN) PARAMETERS AND SHAPE ON 3-D FLUID FLOW IN MOULD FOR BEAM BLANK CONTINUOUS CASTING

According to turbulent theory and characteristics of beam blank continuous casting, 3-D model to represent the flow of beam blank mould is established. The predicted results indicate that the exit obliquity of up 15°(+15°) should be adopted, which will benefit the floatation of non-metallic inclusion and purification of the molten steel. When the nozzle angle is 120°, the flow pattern is reasonable. Proper nozzle depth can be 200mm. Turbulent kinetic of meniscus can be reduced by adopting the square nozzle and suitable area of side outlet when casting speed increases. The results are consistent with those of water model experiment, so the model is exact and reasonable. The model can provide important information for design of SEN and defining of immersion depth.